| /* |
| * Copyright (c) 2018 Google LLC. |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #define DT_DRV_COMPAT apa_apa102 |
| |
| #include <errno.h> |
| #include <zephyr/drivers/led_strip.h> |
| #include <zephyr/drivers/spi.h> |
| #include <zephyr/drivers/gpio.h> |
| #include <zephyr/sys/util.h> |
| |
| struct apa102_config { |
| struct spi_dt_spec bus; |
| }; |
| |
| static int apa102_update(const struct device *dev, void *buf, size_t size) |
| { |
| const struct apa102_config *config = dev->config; |
| static const uint8_t zeros[] = { 0, 0, 0, 0 }; |
| static const uint8_t ones[] = { 0xFF, 0xFF, 0xFF, 0xFF }; |
| const struct spi_buf tx_bufs[] = { |
| { |
| /* Start frame: at least 32 zeros */ |
| .buf = (uint8_t *)zeros, |
| .len = sizeof(zeros), |
| }, |
| { |
| /* LED data itself */ |
| .buf = buf, |
| .len = size, |
| }, |
| { |
| /* End frame: at least 32 ones to clock the |
| * remaining bits to the LEDs at the end of |
| * the strip. |
| */ |
| .buf = (uint8_t *)ones, |
| .len = sizeof(ones), |
| }, |
| }; |
| const struct spi_buf_set tx = { |
| .buffers = tx_bufs, |
| .count = ARRAY_SIZE(tx_bufs) |
| }; |
| |
| return spi_write_dt(&config->bus, &tx); |
| } |
| |
| static int apa102_update_rgb(const struct device *dev, struct led_rgb *pixels, |
| size_t count) |
| { |
| uint8_t *p = (uint8_t *)pixels; |
| size_t i; |
| /* SOF (3 bits) followed by the 0 to 31 global dimming level */ |
| uint8_t prefix = 0xE0 | 31; |
| |
| /* Rewrite to the on-wire format */ |
| for (i = 0; i < count; i++) { |
| uint8_t r = pixels[i].r; |
| uint8_t g = pixels[i].g; |
| uint8_t b = pixels[i].b; |
| |
| *p++ = prefix; |
| *p++ = b; |
| *p++ = g; |
| *p++ = r; |
| } |
| |
| BUILD_ASSERT(sizeof(struct led_rgb) == 4); |
| return apa102_update(dev, pixels, sizeof(struct led_rgb) * count); |
| } |
| |
| static int apa102_update_channels(const struct device *dev, uint8_t *channels, |
| size_t num_channels) |
| { |
| /* Not implemented */ |
| return -EINVAL; |
| } |
| |
| static int apa102_init(const struct device *dev) |
| { |
| const struct apa102_config *config = dev->config; |
| |
| if (!spi_is_ready_dt(&config->bus)) { |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| |
| static const struct led_strip_driver_api apa102_api = { |
| .update_rgb = apa102_update_rgb, |
| .update_channels = apa102_update_channels, |
| }; |
| |
| #define APA102_DEVICE(idx) \ |
| static const struct apa102_config apa102_##idx##_config = { \ |
| .bus = SPI_DT_SPEC_INST_GET( \ |
| idx, \ |
| SPI_OP_MODE_MASTER | SPI_TRANSFER_MSB | SPI_WORD_SET(8), \ |
| 0), \ |
| }; \ |
| \ |
| DEVICE_DT_INST_DEFINE(idx, \ |
| apa102_init, \ |
| NULL, \ |
| NULL, \ |
| &apa102_##idx##_config, \ |
| POST_KERNEL, \ |
| CONFIG_LED_STRIP_INIT_PRIORITY, \ |
| &apa102_api); |
| |
| DT_INST_FOREACH_STATUS_OKAY(APA102_DEVICE) |