| # Copyright (c) 2021 Nordic Semiconductor ASA |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| menu "Output Formatting" |
| |
| menu "Prepend non-hexdump log message with function name" |
| depends on !LOG_FRONTEND_ONLY |
| |
| config LOG_FUNC_NAME_PREFIX_ERR |
| bool "Error messages prepended" |
| |
| config LOG_FUNC_NAME_PREFIX_WRN |
| bool "Warning messages prepended" |
| |
| config LOG_FUNC_NAME_PREFIX_INF |
| bool "Info messages prepended" |
| |
| config LOG_FUNC_NAME_PREFIX_DBG |
| bool "Debug messages prepended" |
| default y |
| |
| endmenu |
| |
| menuconfig LOG_MIPI_SYST_ENABLE |
| bool "MIPI SyS-T format output" |
| select MIPI_SYST_LIB |
| select LOG_OUTPUT |
| help |
| Enable MIPI SyS-T format output for the logger system. |
| |
| if LOG_MIPI_SYST_ENABLE |
| |
| config LOG_MIPI_SYST_USE_CATALOG |
| bool "Use MIPI Sys-T Catalog for logging" |
| depends on !PICOLIBC |
| select LOG_FMT_SECTION |
| select LOG_USE_TAGGED_ARGUMENTS |
| help |
| Use MIPI Sys-T Catalog for logging instead of plain text. |
| |
| config LOG_MIPI_SYST_CATALOG_ARGS_BUFFER_SIZE |
| int "Size of temporary arguments buffer when using Sys-T Catalog" |
| depends on LOG_MIPI_SYST_USE_CATALOG |
| default 1024 |
| help |
| The size (in bytes) of the temporary buffer to store the expanded |
| argument list needed for the MIPI Sys-T library for processing |
| catalog messages. |
| |
| config LOG_MIPI_SYST_ARGS_BUFFER_SIZE |
| int "Buffer size in bytes" |
| default 1024 |
| help |
| This user-configurable option specifies the maximum size (in bytes) to reserve in |
| the call stack for processing the logging format strings MIPI Sys-T library. |
| Increasing it will allow for longer strings to be logged at the expense of used |
| stack space. Conversely decreasing it will lessen the stack burden at the expense |
| of shorter maximum log strings. |
| |
| config LOG_MIPI_SYST_OUTPUT_LOG_MSG_SRC_ID |
| bool "Output Log Message Source ID as Module ID" |
| default y if LOG_MIPI_SYST_USE_CATALOG |
| help |
| Enable this option to output the log message source ID |
| as the Sys-T message module ID (as in origin unit in Sys-T |
| message header). |
| |
| config LOG_MIPI_SYST_MSG_DEFAULT_MODULE_ID |
| int "Default module ID in Sys-T message" |
| range 0 127 |
| default 127 if LOG_MIPI_SYST_OUTPUT_LOG_MSG_SRC_ID |
| default 0 |
| help |
| The default module ID embedded in the origin unit in |
| Sys-T message header. |
| |
| If CONFIG_LOG_MIPI_SYST_OUTPUT_LOG_MSG_SRC_ID is disabled, |
| this will be used for all Sys-T messages. |
| |
| If CONFIG_LOG_MIPI_SYST_OUTPUT_LOG_MSG_SRC_ID is enabled, |
| this will be used for log messages without source IDs, |
| for example, printk() if CONFIG_LOG_PRINTK is enabled. |
| |
| config LOG_MIPI_SYST_MSG_DEFAULT_UNIT_ID |
| int "Default unit ID in Sys-T message" |
| range 0 15 |
| default 0 |
| help |
| The default unit ID embedded in the origin unit in |
| Sys-T message header. |
| |
| endif # LOG_MIPI_SYST_ENABLE |
| |
| config LOG_DICTIONARY_SUPPORT |
| bool |
| select LOG_DICTIONARY_DB |
| help |
| Enable support for dictionary based logging. |
| |
| Dictionary based logging is binary based where predefined strings |
| are replaced with their equivalent addresses from the built binary |
| image file in log output. This reduces the size required to store |
| the log output when there are long format strings to be logged. |
| |
| This should be selected by the backend automatically. |
| |
| config LOG_IMMEDIATE_CLEAN_OUTPUT |
| bool "Clean log output" |
| depends on LOG_MODE_IMMEDIATE |
| help |
| If enabled, interrupts are locked during whole log message processing. |
| As a result, processing on one log message cannot be interrupted by |
| another one and output is clean, not interleaved. However, enabling |
| this option is causing interrupts locking for significant amount of |
| time (up to multiple milliseconds). |
| |
| config LOG_BACKEND_SHOW_COLOR |
| bool "Colors in the backend" |
| depends on LOG_BACKEND_UART || LOG_BACKEND_NATIVE_POSIX || LOG_BACKEND_RTT \ |
| || LOG_BACKEND_SWO || LOG_BACKEND_XTENSA_SIM |
| default y |
| help |
| When enabled selected backend prints errors in red and warning in yellow. |
| |
| if LOG_BACKEND_SHOW_COLOR |
| |
| config LOG_INFO_COLOR_GREEN |
| bool "Use green color for info level logs" |
| |
| endif # LOG_BACKEND_SHOW_COLOR |
| |
| config LOG_TAG_MAX_LEN |
| int "Tag max length" |
| default 0 |
| range 0 64 |
| help |
| Setting non-zero value enables option to specify a tag which is |
| prepended to each log message. Tag can be changed at runtime. |
| |
| config LOG_TAG_DEFAULT |
| string "Default tag" |
| depends on LOG_TAG_MAX_LEN > 0 |
| default "" |
| help |
| Initial tag. |
| |
| config LOG_BACKEND_FORMAT_TIMESTAMP |
| bool "Timestamp formatting in the backend" |
| depends on LOG_BACKEND_UART || LOG_BACKEND_NATIVE_POSIX || LOG_BACKEND_RTT \ |
| || LOG_BACKEND_SWO || LOG_BACKEND_XTENSA_SIM || LOG_BACKEND_FS \ |
| || LOG_BACKEND_ADSP || LOG_BACKEND_ADSP_HDA || LOG_BACKEND_ADSP_MTRACE |
| default y |
| help |
| When enabled timestamp is formatted to hh:mm:ss:ms,us. |
| |
| config LOG_OUTPUT_FORMAT_LINUX_TIMESTAMP |
| bool "Format timestamp in Linux format" |
| help |
| This formatting is something in the middle between the pure raw format |
| and the hh:mm:ss:ms,us one. It resembles the Linux's kernel format in |
| which timestamps are printed as fixed point values with seconds on the |
| left side of the point and microseconds on the right side. |
| |
| endmenu |