| :orphan: |
| |
| .. _zephyr_1.11: |
| |
| Zephyr Kernel 1.11.0 |
| ##################### |
| |
| We are pleased to announce the release of Zephyr kernel version 1.11.0. |
| |
| Major enhancements with this release include: |
| |
| * Thread-level memory protection on x86, ARC and Arm, userspace and memory |
| domains |
| * Symmetric Multi Processing (SMP) support on the Xtensa architecture. |
| * Initial Armv8-M architecture support. |
| * Native development environment on Microsoft Windows. |
| * Native build target on POSIX platforms. |
| * POSIX PSE52 partial support. |
| * Thread support via integration with OpenThread. |
| * Firmware over-the-air (FOTA) updates over BLE using MCUmgr. |
| * Lightweight flash storage layer for constrained devices. |
| * Additional SoC, platform and driver support for many of the already supported |
| platforms. |
| |
| The following sections provide detailed lists of changes by component. |
| |
| Kernel |
| ****** |
| |
| * Initial Symmetric Multi Processing (SMP) support added: |
| |
| * SMP-aware scheduler |
| * SMP timer and idling support |
| * Available on the Xtensa architecture |
| * POSIX PSE52 support: |
| |
| * Timer, clock, scheduler and pthread APIs |
| |
| Architectures |
| ************* |
| |
| * User space and system call related changes: |
| |
| * Added ARC user space implementation |
| * Added Arm user space implementation |
| * Fixed a few MPU related issues with stack guards |
| * Armv8-M initial architecture support, including the following cores: |
| |
| * Arm Cortex-M23 |
| * Arm Cortex-M33 |
| * New POSIX architecture for native GNU/Linux and macOS build targets: |
| |
| * Targets native executables that can be run on the host operating system |
| |
| Boards |
| ****** |
| |
| * New native_posix board for the POSIX architecture: |
| |
| * Includes a template for hardware models |
| * Adds support for console and logging |
| * Interrupts and timers are simulated in several different configurations |
| * Added support for the following Arm boards: |
| |
| * adafruit_trinket_m0 |
| * arduino_zero |
| * lpcxpresso54114 |
| * nrf52_sparkfun |
| * nucleo_f429zi |
| * stm32f072_eval |
| * stm32f072b_disco |
| * Removed Panther board support, which included boards/x86/panther and |
| boards/arc/panther_ss |
| * Refactored dts.fixup so common SoC-related fixes are in arch/<*>/soc |
| and board dts.fixup is only used for board-specific items. |
| |
| Drivers and Sensors |
| ******************* |
| |
| * New LED PWM driver for ESP32 SoC |
| * Fixed ESP32 I2C driver |
| * Added I2C master, QSPI flash, and GPIO drivers for nios-II |
| * Added PinMux, GPIO, serial drivers for LPC54114 |
| * Added PinMux, GPIO, serial, SPI, and watchdog drivers for sam0 |
| * Added APA102 and WS2821B led_strip drivers |
| * Added native entropy driver |
| * Moved some sensors to dts |
| * Added AMG88xx, CCS811, and VL53L0x sensor drivers |
| * Redefined SENSOR_CHAN_HUMIDITY in percent |
| |
| Networking |
| ********** |
| |
| * Generic OpenThread support added |
| * OpenThread support to nRF5 IEEE 802.15.4 driver added |
| * NXP MCUX ethernet driver IPv6 multicast join/leave enhancements |
| * Ethernet STM32 fixes |
| * IEEE 802.15.4 Sub-GHz TI CC1200 chip support added |
| * IEEE 802.15.4 test driver (upipe) hw filtering support added |
| * IEEE 802.15.4 radio API enhancements |
| * Net loopback driver fixes |
| * Net management API event enhancements |
| * IPv6 neighbor addition and removal can be monitored |
| * Static IPv4 and DHCPv4 configuration enhancements |
| * Bluetooth IPSP disconnect fix |
| * Network buffer enhancements |
| * ICMPv4 and ICMPv6 error checking fixes |
| * Network interface address handling enhancements |
| * Add routing support between network interfaces |
| * LWM2M fixes and enhancements |
| * Old legacy HTTP API removed |
| * Old legacy ZoAP API removed |
| * CoAP fixes |
| * TCP fixes |
| * HTTP fixes |
| * RPL fixes |
| * Net-app API fixes |
| * Net-shell fixes |
| * BSD socket API fixes |
| |
| Bluetooth |
| ********* |
| |
| * Multiple fixes to the controller |
| * Fixed potential connection transmission deadlock issue with the help |
| of a dedicated fragment pool |
| * Multiple fixes to Mesh support |
| * Added test automation for Mesh (for tests/bluetooth/tester) |
| |
| Build and Infrastructure |
| ************************ |
| |
| * Native development environment on Microsoft Windows: |
| |
| * Uses CMake and Kconfiglib to avoid requiring an emulation layer |
| * Package management support with Chocolatey for simple setup |
| * Build time now comparable to Linux and macOS using Ninja |
| |
| Libraries / Subsystems |
| *********************** |
| |
| * New management subsystem based on the cross-RTOS MCUmgr: |
| |
| * Secure Firmware Updates over BLE and serial |
| * Support for file system access and statistics |
| * mcumgr cross-platform command-line tool |
| |
| * FCB (File Circular Buffer) lightweight storage layer: |
| |
| * Wear-leveling support for NOR flashes |
| * Suitable for memory constrained devices |
| |
| HALs |
| **** |
| |
| * Updated Arm CMSIS from version 4.5.0 to 5.2.0 |
| * Updated stm32cube stm32l4xx from version 1.9.0 to 1.10.0 |
| * Updated stm32cube stm32f4xx from version 1.16.0 to 1.18.0 |
| * Added Atmel SAMD21 HAL |
| * Added mcux 2.2.1 for LPC54114 |
| * Added HAL for VL53L0x sensor from STM |
| * Imported and moved to nRFx 0.8.0 on Nordic SoCs |
| * Added QSPI Controller HAL driver |
| |
| Documentation |
| ************* |
| |
| * Added MPU specific stack and userspace documentation |
| * Improved docs for Native (POSIX) support |
| * Docs for new samples and supported board |
| * General documentation clarifications and improvements |
| * Identify daily-built master-branch docs as "Latest" version |
| * Addressed Sphinx-generated intra-page link issues |
| * Updated doc generation tools (Doxygen, Sphinx, Breathe, Docutils) |
| |
| Tests and Samples |
| ***************** |
| |
| * Added additional tests and test improvements for user space testing |
| |
| Issue Related Items |
| ******************* |
| |
| These GitHub issues were addressed since the previous 1.10.0 tagged |
| release: |
| |
| .. comment List derived from GitHub Issue query: ... |
| |
| * :github:`1082` - build all tests have issues for devices that don't exist on a given board |
| * :github:`1281` - spi_ll_stm32 driver does not support stm32f1soc |
| * :github:`1291` - Initial Posix PSE52 Support |
| * :github:`1460` - 1.10 Release Checklist |
| * :github:`1462` - rename nano_internal.h to kernel_internal.h |
| * :github:`1526` - Bluetooth:mesh:prov_start: Invalid authentication |
| * :github:`1532` - There are no RISC-V boards in the list of supported boards |
| * :github:`1727` - Support out-of-tree board definitions |
| * :github:`1793` - I2S device APIs and Drivers |
| * :github:`1868` - Build System cleanup and Kernel / Application build separation |
| * :github:`1877` - Provide single point of notification for new data on multiple sockets. |
| * :github:`1890` - Memory Management |
| * :github:`1891` - Native Port |
| * :github:`1892` - NFC Stack |
| * :github:`1893` - Unified Kernel |
| * :github:`1921` - Bluetooth LE 4.2 Hardware Support |
| * :github:`1926` - build system does not re-link if linker script changed |
| * :github:`1930` - bluetooth tester shall support logging on Arduino101 |
| * :github:`2007` - C++ compiler flags are not managed correctly |
| * :github:`2072` - create abstraction layer to directly use Altera HAL drivers for Nios II IP blocks |
| * :github:`2107` - handle configuration changes with more code coverage |
| * :github:`2239` - sporadic illegal instruction exception on Nios II in test_errno |
| * :github:`2244` - LE Controller: remove util folder |
| * :github:`2280` - Move defaults.tc and .known-issue under tests/ |
| * :github:`2347` - Thread Protocol v1.1 Dependencies on the IP Stack |
| * :github:`2365` - Port IOT Protocols to the new IP Stack |
| * :github:`2477` - no unit tests exist for CONFIG_DEBUG_INFO |
| * :github:`2620` - object files created outside of $O directory when obj-XYZ path is relative |
| * :github:`2722` - QEMU NIOS2 sporadic FAIL in tests/legacy/kernel/test_timer/nanokernel |
| * :github:`2760` - Implement Virtual USB ethernet Adapter support |
| * :github:`2819` - legacy/kernel/test_task_priv randomly fails on EMSK ARC |
| * :github:`2889` - [ARC] legacy/benchmark/latency_measure not measuring RIRQ/FIRQ |
| * :github:`2891` - implement _tsc_read equivalent for all architectures |
| * :github:`2912` - Develop Guideline for Handling Configuration Changes with More Code Coverage |
| * :github:`2937` - Thread-level Memory Protection Support |
| * :github:`2939` - Add Xtensa Port |
| * :github:`2943` - Support for the KW22D512 Kinetis MCU based USB Dongle |
| * :github:`2971` - I2C High-Speed Mode is not implemented |
| * :github:`2994` - The build system crashes when GCCARMEMB_TOOLCHAIN_PATH has a space in it |
| * :github:`3069` - XML encoding/decoding library |
| * :github:`3081` - Concise Binary Object Representation (CBOR) |
| * :github:`3083` - I2C problem Zephyr OS sensor example on NRF51 and F401re |
| * :github:`3127` - IP stack does not implement multicasting requirements of IPv6 RFCs and network driver model lacks features to implement it properly |
| * :github:`3240` - Unnecessary code footprint bloat due to "static inline" |
| * :github:`3279` - Reclaiming Memory |
| * :github:`3283` - Split net_buf parsing context from the actual data |
| * :github:`3302` - samples/subsys/logging/logger-hook needs to be a test case |
| * :github:`3308` - [TAHI] No "ICMPv6 error message" is received while sending echo request with parameter problem header |
| * :github:`3316` - [IPv6 TAHI] Section 1: RFC 2460 - IPv6 Specification |
| * :github:`3317` - [IPv6 TAHI]Section 4: RFC 1981 - Path MTU Discovery for IPv6 |
| * :github:`3318` - [IPv6 TAHI]Section 5: RFC 4443 - ICMPv6 |
| * :github:`3322` - [IPv6 TAHI] Section 3: RFC 4862 - IPv6 Stateless Address Autoconfiguration |
| * :github:`3323` - [IPv6 TAHI] Section 2: RFC 4861 - Neighbor Discovery for IPv6 |
| * :github:`3329` - Build warnings [-Wpointer-sign] with LLVM/icx (bluetooth_ipsp) |
| * :github:`3345` - Missing board documentation for riscv32/zedboard_pulpino |
| * :github:`3346` - Missing board documentation for riscv32/qemu_riscv32 |
| * :github:`3351` - Missing board documentation for arm/bbc_microbit board |
| * :github:`3352` - Missing board documentation for arm/nrf51_blenano |
| * :github:`3439` - IP stack: No MTU handling on send() |
| * :github:`3440` - IP stack: No TCP receive window handling |
| * :github:`3483` - Unify STM32 configuration files |
| * :github:`3546` - Enabling networking for targets w/o network hw causes hang on boot |
| * :github:`3565` - Symmetric multiprocessing (SMP) for Xtensa architecture |
| * :github:`3597` - Build warnings [-Wpointer-sign] with LLVM/icx (tests/net/ieee802154/crypto) |
| * :github:`3614` - cdc-acm error when printing one byte at a time |
| * :github:`3617` - Build warnings [-Wshift-overflow] with LLVM/icx (K_MEM_POOL_DEFINE) |
| * :github:`3667` - _IsInIsr doesn't work properly on Cortex M0 |
| * :github:`3685` - Test suite cleanup and Test Coverage |
| * :github:`3704` - Move all X86 boards to device tree |
| * :github:`3707` - intermittent work_queue test failure |
| * :github:`3712` - RPL client node version bogus incrementation |
| * :github:`3718` - Mpu stack guard is not set when reaching main |
| * :github:`3747` - tests/kernel/mem_slab/test_mslab_threadsafe/testcase.ini#test type:qemu-zephyr-arm |
| * :github:`3809` - Build warnings [-Wimplicit-function-declaration] with LLVM/icx (tests/drivers/pci_enum) |
| * :github:`3833` - make device_get_binding() more efficient |
| * :github:`3834` - CDC_ACM is limited to 4 bytes at a time for Arduino 101 |
| * :github:`3838` - Some tests end up with 0 platforms due to bad filtering |
| * :github:`3850` - SPI fails on Nucleo_f334r8 |
| * :github:`3855` - Support board files located in application directory |
| * :github:`3856` - LwM2M: Support write attributes (section 5.4.4 of spec) |
| * :github:`3858` - Enable OpenThread support for Zephyr |
| * :github:`3859` - Create OpenThread platform adaptation for Zephyr |
| * :github:`3860` - Create OpenThread network interface driver |
| * :github:`3862` - Verify that the OpenThread requirements are fulfilled by Zephyr 15.4 radio driver |
| * :github:`3870` - Create a shell to configure OpenThread stack |
| * :github:`3872` - build on windows failed " error: unrecognized command line option '-no-pie'" |
| * :github:`3918` - Build error [use of undeclared identifier]with LLVM/icx (samples/net/nats) |
| * :github:`4000` - xtensa-vectors.S builds wrong versions of ISRs based on HAL information |
| * :github:`4010` - [CID: 174928]: Control flow issues in /tests/kernel/mem_slab/mslab/src/slab.c |
| * :github:`4025` - Upgrade to TinyCrypt 0.2.7 has significant API changes |
| * :github:`4045` - convert to ztest for files in tests/kernel |
| * :github:`4105` - Sensors: move all the drivers using SPI bus to new SPI API |
| * :github:`4106` - Flash: move w25qxxdv driver to new SPI API |
| * :github:`4216` - samples:net:sockets:echo : communication blocks between client and server after few packets transmission |
| * :github:`4351` - arduino_101: USB device is not listed after flashing with a Zephyr sample |
| * :github:`4401` - tests/net/ipv6/test.yaml :--Cannot add multicast IPv6 address |
| * :github:`4445` - sanitycheck --platform-limit is broken |
| * :github:`4513` - parsetab.py is getting corrupted when multiple instance of sanitycheck is executed simultaneously |
| * :github:`4549` - tests/crypto/mbedtls/testcase.yaml#test :Build failed |
| * :github:`4566` - k_busy_wait( ) gives compilation error when CONFIG_SYS_CLOCK_TICKS_PER_SEC is set to 0 |
| * :github:`4568` - dts generation incorrect |
| * :github:`4576` - no testcase.yaml for tests/drivers/spi/spi_loopback |
| * :github:`4578` - tests/net/socket/udp/testcase.yaml#test : Build failed on esp32 |
| * :github:`4596` - tests/net/mgmt/testcase.yaml#test :failed due to un-handled exception |
| * :github:`4597` - tests/drivers/ipm/testcase.yaml#test :unable to print the Expected output |
| * :github:`4603` - sanitycheck either conceals information from user or spams it |
| * :github:`4606` - usb mass storage : config waits for Vendor ID and Product ID from user during building |
| * :github:`4633` - Implement flash page layout api in the Kinetis flash driver |
| * :github:`4635` - xtensa-esp32-elf-gcc.exe: error: unrecognized command line option '-no-pie' |
| * :github:`4653` - net: tcp->recv_max_ack isn't used |
| * :github:`4666` - x86 device trees need interrupt controller nodes |
| * :github:`4687` - Windows: Remove all dependencies on MSYS2 |
| * :github:`4699` - PWM LED Driver for ESP32 |
| * :github:`4705` - tests/net/socket/tcp/ undefined reference to __getreent |
| * :github:`4709` - tests/kernel/fatal/testcase.yaml#stack-sentinel : Kernel Panic |
| * :github:`4724` - sanitycheck build_only option can be confusing |
| * :github:`4772` - doc: add contributing info about shippable failures |
| * :github:`4777` - need a testcase for version number of the kernel and version.h |
| * :github:`4779` - net: tcp: FIN isn't sent when performing active close. |
| * :github:`4826` - Bluetooth IPSP example does not reach main() on qemu_cortex_m3 |
| * :github:`4828` - device tree: Introduce bus objects (i2c-device) |
| * :github:`4851` - cmake does not show verbose output of build tools |
| * :github:`4885` - cmake: IS_TEST guessing gets thrown off by symlinks |
| * :github:`4924` - dumb_http_server pollutes the source directory |
| * :github:`4934` - net: 15.4 network interfaces use incorrect MTU setting of 127 |
| * :github:`4941` - LwM2M: support discovery other than '/' |
| * :github:`4983` - ARMv8-M basic support |
| * :github:`4989` - Bluetooth: PTS fails to connect to Zephyr |
| * :github:`5010` - changes to included linker scripts are not picked up by the build system |
| * :github:`5017` - Genuino/Arduino 101 Sensor Sample BMI160: Gyro Device not found |
| * :github:`5091` - MPU fault at drivers/flash/soc_flash_nrf5.c:493 with NFFS enabled on nrf52840_pca10056 |
| * :github:`5101` - LwM2M: device hang after requesting a firmware update to a loopback device IP |
| * :github:`5109` - yaml: fix key/value syntax to 'mapping' instead of 'series' |
| * :github:`5130` - include guards missing in toolchain/gcc.h and toolchain/common.h |
| * :github:`5136` - "Distinguishing Features" section in docs is outdated and needs an update |
| * :github:`5143` - Cmake ignores setting CONFIG_ETH_MCUX_0=n in prj.conf |
| * :github:`5148` - Lightweight flash storage layer |
| * :github:`5162` - Reduce duplication in UUID definitions? |
| * :github:`5184` - kernel system call handlers missing due to -Wl,--no-whole-archive |
| * :github:`5221` - Build doesn't fail if total RAM usage is greater than the RAM available on the board |
| * :github:`5226` - Compiling with -O0 causes the kobject text area to exceed the limit (linker error) |
| * :github:`5228` - The build fails when building echo_server with nrf52840_pca10056 |
| * :github:`5240` - I2C is enabled by default on ESP32 |
| * :github:`5247` - Object tracing test case fails in NRF boards |
| * :github:`5256` - _nano_tick_delta, sys_tick_delta, sys_tick_delta_32: not used or tested |
| * :github:`5270` - Not all IEEE802154_MCR20A_RAW references were removed |
| * :github:`5282` - net: IPv6 DAD is incorrect, wouldn't work ("always succeed") on mcast medium like Ethernet |
| * :github:`5283` - reference to non-existing functions in arch/x86/core/intstub.S |
| * :github:`5305` - flash: use generated FLASH_WRITE_BLOCK_SIZE in flash_stm32_api |
| * :github:`5317` - IPSP deadlock during disconnect -> net_if_down |
| * :github:`5326` - IPSP ping fails |
| * :github:`5328` - build system should try and create conf if not found for non-zephyr SDK |
| * :github:`5334` - CMake: Ninja support is broken |
| * :github:`5345` - Cmake: ext: Header file include error: No such file or directory |
| * :github:`5348` - rom_report is broken for some environments |
| * :github:`5351` - Some libraries should automatically be linked with 'app' |
| * :github:`5355` - qemu_x86/qemu_x86_nommu hangs on big executable files |
| * :github:`5370` - [Coverity CID: 180699] Error handling issues in /tests/bluetooth/tester/src/gatt.c |
| * :github:`5374` - merge_config.sh can behave differently from merge_config.py |
| * :github:`5379` - sample: net/socket/http_get: no printf output |
| * :github:`5382` - P2P Device Firmware Update (FOTA) over BLE and Serial |
| * :github:`5391` - drivers: stm32 clock control: F0 Series with PREDIV1 Support uses wrong PLLSOURCE define for HSI clock |
| * :github:`5401` - delta_ticks_from_prev become negative and waiting tasks never scheduled |
| * :github:`5406` - UART1 on STM32F0 Series not working: errors in makro to enable clock |
| * :github:`5418` - Provide a python based replacement for gperf |
| * :github:`5419` - Provide a python based kconfig processing script, replacement for conf/mconf.. |
| * :github:`5428` - can not build for esp32 |
| * :github:`5444` - bluetooth controller fails when building with -Wshadow |
| * :github:`5448` - STM32: Entropy test could not build |
| * :github:`5449` - STM32: provide default configuration for entropy sample |
| * :github:`5453` - gitlint should allow tabs in commit messages |
| * :github:`5458` - [ESP32] Make error |
| * :github:`5466` - sanitycheck: "CMake Error: : System Error: File name too long" |
| * :github:`5467` - NFFS file system does no build when newlib libc is used |
| * :github:`5471` - cmake errors at -B containing @ |
| * :github:`5476` - Native port (posix) to write own PID into a file |
| * :github:`5477` - Native port (posix) to support receiving signals |
| * :github:`5483` - Native port (POSIX) should accept command-line arguments |
| * :github:`5484` - net: ARP/ND: Possibility for deadlocks and DoS |
| * :github:`5486` - Bluetooth: Cannot connect to prevoiusly disconnected device when BT_PRIVACY is enabled |
| * :github:`5488` - target_ld_options will apply flags that should be skipped |
| * :github:`5493` - NFFS does not work with STM32L4 devices due to flash restrictions |
| * :github:`5497` - cmake: allow to link external libraries with --whole-archive |
| * :github:`5499` - config BT_CTLR_DEBUG_PINS |
| * :github:`5504` - net: Incorrect logic for TCP "ackerr" statistics |
| * :github:`5530` - [Coverity CID: 181848] Null pointer dereferences in /subsys/bluetooth/host/mesh/access.c |
| * :github:`5531` - [Coverity CID: 181847] Incorrect expression in /samples/drivers/crypto/src/main.c |
| * :github:`5539` - tests/kernel/fatal/stack-sentinel fails when asserts are enabled |
| * :github:`5546` - (Stupid) questions about coverage reports |
| * :github:`5548` - coverage should be collected from code built with -O0 |
| * :github:`5557` - Cloning Zephyr with git's core.autocrlf=true leads to obscure errors |
| * :github:`5565` - net: Kconfig: NET_BUF_LOG and NET_BUF_SIMPLE_LOG unrightly select STDOUT_CONSOLE |
| * :github:`5566` - kconfig: STDOUT_CONSOLE unrightly stuffed under subsys/debug |
| * :github:`5576` - None of the :github:'XYZ' links work in the 1.10 release notes |
| * :github:`5589` - Issue with using generic gcc cross compile with cmake |
| * :github:`5601` - docs for cc3220sf_launchxl are out of date/incorrect |
| * :github:`5608` - Bluetooth LE continuous scan weird behaviour |
| * :github:`5619` - zephyr.git/tests/misc/test_build/testcase.yaml#test_newlib @ esp32:xtensa BUILD failed |
| * :github:`5626` - Building samples failed |
| * :github:`5640` - MacOS compile error with -std=gnu89 |
| * :github:`5645` - build failures with asserts enabled/newlib: arch/arm/core/cortex_m/mpu/nxp_mpu.c |
| * :github:`5646` - userbuffer_validate test fails with double fault if CONFIG_USERSPACE disabled |
| * :github:`5650` - i2c driver test on ESP32 fails with error |
| * :github:`5651` - [In Progress] arch: arm: linkder: vt must be linked at address 0x00000000 for Cortex-M0 |
| * :github:`5660` - doc: make: make htmldocs fails in genrest.py/kconfiglib.py |
| * :github:`5673` - kconfig regression: Existing configuration is overwritten on reconfiguration |
| * :github:`5687` - docs: Confusing treatment of "Sensor Drivers" in Zephyr subsystem docs |
| * :github:`5692` - sensors: struct sensor_value::val2 is confusingly defined |
| * :github:`5693` - sensors: SENSOR_CHAN_HUMIDITY confusingly defined in "milli percent", SENSOR_CHAN_DISTANCE inconsistently defined in millimeters |
| * :github:`5696` - net_app: Static vs DHCPv4 behavior appears to be not as described |
| * :github:`5699` - Zephyr installs a broken pyOCD |
| * :github:`5717` - CONTRIBUTING instructions are Linux-specific and don't work for Windows |
| * :github:`5719` - need a zephyr-env.sh equivalent for Windows developers |
| * :github:`5720` - Add CONFIG_NOOPTIMIZATIONS option |
| * :github:`5722` - dts board configuration is incompatible with "build all" kind of test |
| * :github:`5724` - [Windows] Instructions for setting up a bash-less environment uses bashisms |
| * :github:`5726` - CI should use the same generator as the sanitycheck default |
| * :github:`5737` - [Coverity CID: 182195] Error handling issues in /subsys/fs/fcb/fcb_walk.c |
| * :github:`5740` - [Coverity CID: 181923] Incorrect expression in /subsys/bluetooth/controller/ll_sw/ctrl.c |
| * :github:`5741` - [Coverity CID: 181922] Incorrect expression in /subsys/bluetooth/controller/ll_sw/ctrl.c |
| * :github:`5743` - Windows and Linux are writing .config files with options re-ordered |
| * :github:`5749` - Exception and Interrupt vector forwarding |
| * :github:`5753` - Bluetooth: controller: In nRF5 radio. c RATEBOOST event not cleared in ISRs |
| * :github:`5755` - Support flash in jlink runner |
| * :github:`5756` - MCUboot-compatible builds in Zephyr |
| * :github:`5760` - doc: device.h defines device_power_management_api group twice |
| * :github:`5761` - NRF5 BLE radio driver: PPI18 is cleared unconditionally |
| * :github:`5762` - Windows 10 WSL does not supports Native POSIX Boards |
| * :github:`5766` - boards: nucleo_f413zh: Likely outdated OpenOCD info in docs |
| * :github:`5771` - Linking issues with host cross compile with cmake |
| * :github:`5772` - sanitycheck crashes if ZEPHYR_BASE has symlinks in its path |
| * :github:`5778` - Add/fix flash controller nodes for NXP kinetis SoCs |
| * :github:`5779` - bluetooth test_controller_4_0 fails to build on nrf52840_pca10056 |
| * :github:`5784` - make rom_report fails for qemu_x86 (not finding zephyr.bin) |
| * :github:`5794` - wiki/Development-Model is out of date |
| * :github:`5808` - msys2 getting started instructions are missing Ninja install step |
| * :github:`5817` - socket.h: Using #define for POSIX redefinition of zsock\_ functions has unintended consequences |
| * :github:`5821` - [MSYS2] Unable to build Zephyr |
| * :github:`5823` - Bluetooth: Collision during Start Encryption procedure |
| * :github:`5836` - spi: stm32: convert remaining boards that support SPI to using dts |
| * :github:`5853` - Using newlibc in a project breaks 'rom_report' and 'ram_report' targets. |
| * :github:`5866` - ram_report not working for qemu targets |
| * :github:`5877` - sensors: Cleanup Kconfig for address, driver & bus name |
| * :github:`5881` - enabling THREAD_MONITOR causes tests to fail |
| * :github:`5886` - [Coverity CID: 182602] Integer handling issues in /drivers/interrupt_controller/system_apic.c |
| * :github:`5887` - [Coverity CID: 182597] Control flow issues in /drivers/sensor/vl53l0x/vl53l0x.c |
| * :github:`5888` - [Coverity CID: 182594] Control flow issues in /drivers/sensor/lsm6ds0/lsm6ds0.c |
| * :github:`5889` - [Coverity CID: 182593] Control flow issues in /drivers/sensor/vl53l0x/vl53l0x.c |
| * :github:`5890` - [Coverity CID: 182588] Integer handling issues in /drivers/sensor/hts221/hts221.c |
| * :github:`5903` - Code coverage reports seem wrong |
| * :github:`5919` - Remove obsolete FLASH_DRIVER_NAME |
| * :github:`5938` - Incorrectly reported coverage changes |
| * :github:`5952` - API k_delayed_work_submit_to_queue() make a delayed_work unusable |
| * :github:`5958` - "Ninja flash" swallows user prompts |
| * :github:`5968` - datastructure for LIFO |
| * :github:`5982` - nRF5x subscribe will cause HardFault while disconnect and reconnect |
| * :github:`5989` - workstation setup instructions are broken for Fedora |
| * :github:`5992` - doc: Discrepancy in Zephyr memory domain API documentation |
| * :github:`5994` - samples/bluetooth/ipsp: build failed for MICRO-BIT & NRF51-PCA10028 HW |
| * :github:`5996` - Need a "ps aux" like command to list all running threads and their attributes |
| * :github:`6010` - Removal of old HTTP API is causing errors and faults |
| * :github:`6013` - updated workstations setup breaks FC27 |
| * :github:`6023` - Bluetooth: Invalid behaviour of Transport Layer after Incomplete timer expiration |
| * :github:`6025` - mbedTLS: Buffer overflow security issue, requires upgrade to 2.7.0 |
| * :github:`6050` - IPSP sample failed: Cannot bind IPv6 mcast (-2) |
| * :github:`6062` - build failure in tests/boards/altera_max10/i2c_master with sys log enabled |
| * :github:`6064` - k_is_in_isr() returns false inside "direct" interrupts on several arches |
| * :github:`6081` - echo server crash from corrupt ICMPv4 packet |
| * :github:`6083` - Bluetooth: Regression in MESH tests |
| * :github:`6091` - [Coverity CID: 182780] Error handling issues in /samples/net/sockets/http_get/src/http_get.c |
| * :github:`6092` - [Coverity CID: 182779] Memory - corruptions in /drivers/flash/soc_flash_nios2_qspi.c |
| * :github:`6102` - [Coverity CID: 182769] Error handling issues in /subsys/bluetooth/host/mesh/beacon.c |
| * :github:`6121` - doc: unit tests documentation refers to non existing sample code |
| * :github:`6127` - net: Semantics of CONFIG_NET_BUF_POOL_USAGE changed (incorrectly) |
| * :github:`6131` - mbedtls: Name of config-mini-tls1_2.h contradicts description |
| * :github:`6135` - build error with gcc 7.3 |
| * :github:`6164` - timer: cortex_m: Incorrect read of clock cycles counter after idle tickless period |
| * :github:`6185` - [MSYS2] Unable to build hello_world sample |
| * :github:`6194` - K64F ethernet regression since f7ec62eb |
| * :github:`6197` - echo server crash from corrupt ICMPv6 packet |
| * :github:`6204` - bluetooth controller: crc init is not random |
| * :github:`6217` - echo server crash from corrupt ICMPv6 NS packet |
| * :github:`6229` - Bluetooth, nRF51: ticker_success_assert during flash erase |
| * :github:`6231` - samples/bluetooth/eddystone: failed to connect with central device |
| * :github:`6232` - samples/bluetooth/central_hr: Run time HARD fault occurs |
| * :github:`6233` - samples/bluetooth/central: Run time HARD fault occurs |
| * :github:`6235` - echo server crash from ICMPv6 NS source link layer address anomaly |
| * :github:`6238` - spi: stm32f0 IRQ priority is invalid |
| * :github:`6240` - "Previous execution" and "Next execution" display problem. |
| * :github:`6257` - test, please ignore |
| * :github:`6261` - [Coverity CID: 182887] Control flow issues in /drivers/gpio/gpio_esp32.c |
| * :github:`6263` - ARC: Implement userspace |
| * :github:`6264` - ARM: Implement Userspace |
| * :github:`6279` - Add doc to samples/bluetooth/mesh & samples/bluetooth/mesh_demo |
| * :github:`6284` - docs.zephyrproject.org should be served with HTTPS |
| * :github:`6309` - Non-blocking BSD sockets not working as expected |
| * :github:`6312` - The shell sample does not working on k64f board |
| * :github:`6315` - echo server crash from malformed ICMPv6 NA |
| * :github:`6322` - shell crashes when enter is pressed |
| * :github:`6323` - "SPI master port SPI_1 not found* when porting spi ethernet device enc28j60 on stm32_min_dev board |
| * :github:`6324` - doc: Project coding standards: page not found |
| * :github:`6333` - How do I implement GPIO on the f429zi board? |
| * :github:`6339` - samples/drivers/gpio Sample doesn't work on ESP32 after SMP support was added |
| * :github:`6346` - ESP-32 preemption regressions with asm2 |
| * :github:`6382` - echo server: crash from unsolicited RA reachable time anomaly |
| * :github:`6393` - echo server: crash from NS flood |
| * :github:`6429` - How to add custom driver subdirectory to application project? |
| * :github:`6432` - daily doc build pages don't indicate their version |
| * :github:`6439` - ESP32 doesn't compile in master |
| * :github:`6444` - tests/kernel/mem_protect/obj_validation/ fails to build |
| * :github:`6455` - k_sleep() fails on ESP32 sometimes |
| * :github:`6469` - tests/crypto/ecc_dsa results in FATAL EXCEPTION on esp32 |
| * :github:`6470` - tests/crypto/ecc_dh results in FATAL EXCEPTION on esp32 |
| * :github:`6471` - tests/crypto/aes results in Assertion failure on esp32 |
| * :github:`6472` - tests/crypto/sha256 results in Assertion failure on esp32 |
| * :github:`6505` - Userspace support: stack corruption for ARC em7d v2.3 |
