| /* |
| * Copyright (c) 2020 Nordic Semiconductor ASA |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <string.h> |
| #include <zephyr/sys/util.h> |
| |
| #define BT_MESH_BLOB_OP_XFER_GET BT_MESH_MODEL_OP_2(0x83, 0x00) |
| #define BT_MESH_BLOB_OP_XFER_START BT_MESH_MODEL_OP_2(0x83, 0x01) |
| #define BT_MESH_BLOB_OP_XFER_CANCEL BT_MESH_MODEL_OP_2(0x83, 0x02) |
| #define BT_MESH_BLOB_OP_XFER_STATUS BT_MESH_MODEL_OP_2(0x83, 0x03) |
| #define BT_MESH_BLOB_OP_BLOCK_GET BT_MESH_MODEL_OP_2(0x83, 0x05) |
| #define BT_MESH_BLOB_OP_BLOCK_START BT_MESH_MODEL_OP_2(0x83, 0x04) |
| #define BT_MESH_BLOB_OP_CHUNK BT_MESH_MODEL_OP_1(0x66) |
| #define BT_MESH_BLOB_OP_BLOCK_STATUS BT_MESH_MODEL_OP_1(0x67) |
| #define BT_MESH_BLOB_OP_BLOCK_REPORT BT_MESH_MODEL_OP_1(0x68) |
| #define BT_MESH_BLOB_OP_INFO_GET BT_MESH_MODEL_OP_2(0x83, 0x06) |
| #define BT_MESH_BLOB_OP_INFO_STATUS BT_MESH_MODEL_OP_2(0x83, 0x07) |
| |
| #define BLOB_BLOCK_NOT_SET 0xffff |
| |
| #define BLOB_CHUNK_SDU_OVERHEAD \ |
| (BT_MESH_MODEL_OP_LEN(BT_MESH_BLOB_OP_CHUNK) + 2 + BT_MESH_MIC_SHORT) |
| |
| #define BLOB_CHUNK_SIZE_MAX(sdu_max) ((sdu_max) - BLOB_CHUNK_SDU_OVERHEAD) |
| #define BLOB_CHUNK_SDU_LEN(chunk_size) (BLOB_CHUNK_SDU_OVERHEAD + (chunk_size)) |
| |
| /* Utility macros for calculating log2 of a number at compile time. |
| * Used to determine the log2 representation of the block size, which |
| * is configured as a raw number, but encoded as log2. |
| * |
| * The macros expand to a series of ternary expressions, effectively |
| * searching through power of twos until a match is found. |
| * According to the specification, the block size cannot be larger than 2^20, |
| * so we'll stop the search at 20. |
| */ |
| #define _BLOB_LOG_2_CEIL(l, x) ((x) <= (1U << l)) ? l : |
| #define _BLOB_LOG_2_FLOOR(l, x) ((x) < (1U << (l + 1))) ? l : |
| |
| #define BLOB_BLOCK_SIZE_LOG_CEIL(x) (LISTIFY(20, _BLOB_LOG_2_CEIL, (), x) 20) |
| #define BLOB_BLOCK_SIZE_LOG_FLOOR(x) (LISTIFY(20, _BLOB_LOG_2_FLOOR, (), x) 20) |
| |
| /* Log2 representation of the minimum block size */ |
| #define BLOB_BLOCK_SIZE_LOG_MIN BLOB_BLOCK_SIZE_LOG_CEIL(CONFIG_BT_MESH_BLOB_BLOCK_SIZE_MIN) |
| /* Log2 representation of the maximum block size */ |
| #define BLOB_BLOCK_SIZE_LOG_MAX BLOB_BLOCK_SIZE_LOG_FLOOR(CONFIG_BT_MESH_BLOB_BLOCK_SIZE_MAX) |
| |
| #if defined(CONFIG_BT_MESH_BLOB_SRV) |
| #define BLOB_BLOCK_REPORT_STATUS_MSG_MAXLEN ( \ |
| MAX(sizeof(((struct bt_mesh_blob_block *)0)->missing), \ |
| CONFIG_BT_MESH_BLOB_SRV_PULL_REQ_COUNT * 3)) |
| #define BLOB_BLOCK_STATUS_MSG_MAXLEN (5 + \ |
| MAX(sizeof(((struct bt_mesh_blob_block *)0)->missing), \ |
| CONFIG_BT_MESH_BLOB_SRV_PULL_REQ_COUNT * 3)) |
| #else |
| #define BLOB_BLOCK_REPORT_STATUS_MSG_MAXLEN sizeof(((struct bt_mesh_blob_srv *)0)->block.missing) |
| #define BLOB_BLOCK_STATUS_MSG_MAXLEN (5 + sizeof(((struct bt_mesh_blob_srv *)0)->block.missing)) |
| #endif |
| |
| #define BLOB_XFER_STATUS_MSG_MAXLEN (17 + sizeof(((struct bt_mesh_blob_srv *)0)->state.blocks)) |
| |
| enum bt_mesh_blob_chunks_missing { |
| BT_MESH_BLOB_CHUNKS_MISSING_ALL, |
| BT_MESH_BLOB_CHUNKS_MISSING_NONE, |
| BT_MESH_BLOB_CHUNKS_MISSING_SOME, |
| BT_MESH_BLOB_CHUNKS_MISSING_ENCODED, |
| }; |
| |
| static inline size_t blob_block_size(size_t xfer_size, uint8_t block_size_log, |
| uint32_t idx) |
| { |
| if (((idx + 1U) << block_size_log) <= xfer_size) { |
| return (1U << block_size_log); |
| } |
| |
| return xfer_size & BIT_MASK(block_size_log); |
| } |
| |
| static inline void blob_chunk_missing_set(uint8_t *missing_chunks, |
| int idx, bool missing) |
| { |
| WRITE_BIT(missing_chunks[idx / 8], idx % 8, missing); |
| } |
| |
| static inline bool |
| blob_chunk_missing_get(const uint8_t *missing_chunks, int idx) |
| { |
| return !!(missing_chunks[idx / 8] & BIT(idx % 8)); |
| } |
| |
| static inline void blob_chunk_missing_set_all(struct bt_mesh_blob_block *block) |
| { |
| size_t bytes = block->chunk_count / 8; |
| |
| memset(block->missing, 0xff, bytes); |
| if (block->chunk_count % 8) { |
| block->missing[bytes] = BIT_MASK(block->chunk_count % 8); |
| } |
| } |
| |
| static inline void blob_chunk_missing_set_none(struct bt_mesh_blob_block *block) |
| { |
| memset(block->missing, 0, sizeof(block->missing)); |
| } |
| |
| /** @brief Perform a message broadcast to all BLOB Transfer Client Target nodes. |
| * |
| * Will send to a group or each Target node individually, repeating until |
| * all Target nodes have responded or the retry time has run out. |
| * |
| * @param cli BLOB Transfer Client instance |
| * @param ctx Broadcast context |
| */ |
| void blob_cli_broadcast(struct bt_mesh_blob_cli *cli, |
| const struct blob_cli_broadcast_ctx *ctx); |
| |
| /** @brief Register that a Target node responded to a broadcast. |
| * |
| * @param cli BLOB Transfer Client instance |
| * @param target Target node that responded. |
| */ |
| void blob_cli_broadcast_rsp(struct bt_mesh_blob_cli *cli, |
| struct bt_mesh_blob_target *target); |
| |
| /** @brief Notify the BLOB Transfer Client that the requested transmission is complete. |
| * |
| * Should be called once for each call to the @ref blob_cli_broadcast_ctx.send |
| * callback. |
| * |
| * @param cli BLOB Transfer Client instance. |
| */ |
| void blob_cli_broadcast_tx_complete(struct bt_mesh_blob_cli *cli); |
| |
| /** @brief Aborts any ongoing BLOB Transfer Client operations. |
| * |
| * @param cli BLOB Transfer Client instance. |
| */ |
| void blob_cli_broadcast_abort(struct bt_mesh_blob_cli *cli); |