| CONFIG_NET_VLAN=y |
| |
| # We have one non-vlan interface and two VLAN interfaces |
| CONFIG_NET_VLAN_COUNT=2 |
| |
| # There will be three network interfaces. |
| |
| # First ethernet interface will use these settings |
| CONFIG_NET_CONFIG_MY_IPV6_ADDR="2001:db8::1" |
| CONFIG_NET_CONFIG_PEER_IPV6_ADDR="2001:db8::2" |
| CONFIG_NET_CONFIG_MY_IPV4_ADDR="192.0.2.1" |
| CONFIG_NET_CONFIG_PEER_IPV4_ADDR="192.0.2.2" |
| |
| # Second VLAN interface will have these settings |
| CONFIG_NET_SAMPLE_COMMON_VLAN_SETUP_1="100;2001:db8:100::1/64,198.51.100.1/24" |
| |
| # Third VLAN interface will have these settings |
| CONFIG_NET_SAMPLE_COMMON_VLAN_SETUP_2="200;2001:db8:200::1/64,203.0.113.1/24" |
| |
| # Each interface needs at least 2 context. So if we have three |
| # interfaces we need minimum 6 context but allocate more so that |
| # we do not run out of them. |
| CONFIG_NET_MAX_CONTEXTS=10 |
| CONFIG_NET_MAX_CONN=10 |
| |
| CONFIG_NET_INTERFACE_NAME=y |
| CONFIG_NET_INTERFACE_NAME_LEN=15 |
