| # SPDX-License-Identifier: Apache-2.0 |
| |
| # Zephyr Kernel Configuration |
| CONFIG_ARM=y |
| CONFIG_SOC_SERIES_STM32L0X=y |
| |
| # Platform Configuration |
| CONFIG_SOC_FAMILY_STM32=y |
| CONFIG_SOC_STM32L072XZ=y |
| CONFIG_BOARD_DRAGINO_LSN50=y |
| |
| # General Kernel Options |
| CONFIG_CORTEX_M_SYSTICK=y |
| CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=32000000 |
| |
| # Serial Drivers |
| CONFIG_SERIAL=y |
| CONFIG_UART_INTERRUPT_DRIVEN=y |
| # enable console |
| CONFIG_CONSOLE=y |
| CONFIG_UART_CONSOLE=y |
| |
| # Pinmux Driver |
| CONFIG_PINMUX=y |
| |
| # GPIO Controller |
| CONFIG_GPIO=y |
| |
| # Clock configuration |
| CONFIG_CLOCK_CONTROL=y |
| # SYSCLK selection |
| CONFIG_CLOCK_STM32_SYSCLK_SRC_PLL=y |
| # Use HSI source |
| CONFIG_CLOCK_STM32_PLL_SRC_HSI=y |
| CONFIG_CLOCK_STM32_PLL_DIVISOR=2 |
| # produce 32Mhz clock at PLL output |
| CONFIG_CLOCK_STM32_PLL_MULTIPLIER=4 |
| CONFIG_CLOCK_STM32_AHB_PRESCALER=1 |
| CONFIG_CLOCK_STM32_APB1_PRESCALER=1 |
