| # SPDX-License-Identifier: Apache-2.0 |
| |
| CONFIG_XTENSA=y |
| CONFIG_XTENSA_RESET_VECTOR=n |
| |
| CONFIG_BOARD_ESP32=y |
| CONFIG_SOC_ESP32=y |
| |
| CONFIG_MAIN_STACK_SIZE=2048 |
| |
| CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=40000000 |
| |
| CONFIG_CONSOLE=y |
| CONFIG_SERIAL_HAS_DRIVER=y |
| CONFIG_SERIAL=y |
| CONFIG_UART_CONSOLE=y |
| CONFIG_UART_ESP32=y |
| |
| CONFIG_XTENSA_USE_CORE_CRT1=n |
| |
| CONFIG_PINMUX=y |
| CONFIG_PINMUX_ESP32=y |
| |
| CONFIG_GPIO=y |
| CONFIG_GPIO_ESP32=y |
| |
| CONFIG_ENTROPY_ESP32_RNG=y |
| |
| CONFIG_SW_ISR_TABLE=y |
| CONFIG_GEN_ISR_TABLES=y |
| CONFIG_GEN_IRQ_VECTOR_TABLE=n |
| |
| CONFIG_I2C=y |
| CONFIG_I2C_ESP32=y |
| CONFIG_I2C_0=y |
| CONFIG_I2C_1=y |
| CONFIG_I2C_2=n |
| CONFIG_I2C_3=n |
| |
| # FIXME: ESP32 port should support DTS. |
| CONFIG_HAS_DTS_I2C=n |
| |
| # IRQ priorities are fixed on Xtensa, but Kconfig will ask for these |
| # if not set. |
| CONFIG_I2C_0_IRQ_PRI=1 |
| CONFIG_I2C_1_IRQ_PRI=1 |
