blob: 64164ba0bb2ab82c5037a0a424d3b6f0c1f65bd6 [file] [log] [blame]
# Kconfig - OpenThread driver configuration options
#
#
# Copyright (c) 2018 Nordic Semiconductor ASA
#
# SPDX-License-Identifier: Apache-2.0
#
#
# OpenThread options
#
menuconfig NET_L2_OPENTHREAD
bool "OpenThread L2"
depends on FLASH
depends on FLASH_PAGE_LAYOUT
depends on CPLUSPLUS
depends on REBOOT
select OPENTHREAD_PLAT
if NET_L2_OPENTHREAD
config OPENTHREAD_PLAT
bool
help
This option enables OpenThread platform
if OPENTHREAD_PLAT
menuconfig OPENTHREAD_DEBUG
bool "OpenThread stack log support"
help
This option enables log support for OpenThread
if OPENTHREAD_DEBUG
choice
prompt "OpenThread stack log level"
help
This option selects log level for OpenThread stack.
config OPENTHREAD_LOG_LEVEL_ERROR
bool "Error"
config OPENTHREAD_LOG_LEVEL_WARNING
bool "Warning"
config OPENTHREAD_LOG_LEVEL_INFO
bool "Info"
config OPENTHREAD_LOG_LEVEL_DEBUG
bool "Debug"
endchoice
endif
endif
config OPENTHREAD_LOG_LEVEL
int
default 1 if OPENTHREAD_LOG_LEVEL_ERROR
default 2 if OPENTHREAD_LOG_LEVEL_WARNING
default 3 if OPENTHREAD_LOG_LEVEL_INFO
default 4 if OPENTHREAD_LOG_LEVEL_DEBUG
default 0
menuconfig OPENTHREAD_L2_DEBUG
bool "OpenThread L2 log support"
help
This option enables log support for OpenThread
if OPENTHREAD_L2_DEBUG
config OPENTHREAD_L2_DEBUG_DUMP_15_4
bool "Dump 802.15.4 packets"
help
This option enables dumping of 802.15.4 packets
config OPENTHREAD_L2_DEBUG_DUMP_IPV6
bool "Dump IPv6 packets"
help
This option enables dumping of IPv6 packets
endif
module = OPENTHREAD_L2
module-dep = NET_LOG
module-str = Log level for OpenThread driver
module-help = Enables OpenThread driver to output debug messages.
source "subsys/net/Kconfig.template.log_config.net"
config OPENTHREAD_THREAD_PRIORITY
int "OpenThread thread priority"
default 8
config OPENTHREAD_THREAD_STACK_SIZE
int "OpenThread thread stack size"
default 6144 if OPENTHREAD_COMMISSIONER
default 3072
config OPENTHREAD_PKT_LIST_SIZE
int "List size for Ip6 packet buffering"
default 10
config OPENTHREAD_PANID
int "Default PAN ID"
default 43981
config OPENTHREAD_CHANNEL
int "Default Channel"
default 11
config OPENTHREAD_NETWORK_NAME
string "Default network name"
default "ot_zephyr"
help
Network name for OpenThread
config OPENTHREAD_XPANID
string "Default Extended PAN ID"
default "de:ad:00:be:ef:00:ca:fe"
help
Extended PAN ID for OpenThread with
format "de:ad:00:be:ef:00:ca:fe"
choice
prompt "OpenThread device type"
help
This option selects Thread network device type
config OPENTHREAD_FTD
bool "FTD - Full Thread Device"
config OPENTHREAD_MTD
bool "MTD - Minimal Thread Device"
endchoice
config OPENTHREAD_SHELL
bool "Enable OpenThread shell"
select SHELL
default y
config OPENTHREAD_DIAG
bool "Diagnostic functions support"
help
Enable OpenThread CLI diagnostic commands
config OPENTHREAD_COMMISSIONER
bool "Commissioner functions support"
help
Enable commissioner capability in OpenThread stack
config OPENTHREAD_JOINER
bool "Joiner functions support"
help
Enable joiner capability in OpenThread stack
config OPENTHREAD_JOINER_AUTOSTART
bool "Support for automatic joiner start"
depends on OPENTHREAD_JOINER
help
Enable automatic joiner start
config OPENTHREAD_JOINER_PSKD
string "Default Pre Shared key for the Device to start joiner"
depends on OPENTHREAD_JOINER_AUTOSTART
default "J01NME"
help
Pre Shared Key for the Device to start joiner
config OPENTHREAD_PLATFORM_INFO
string "Platform information for OpenThread"
default "ZEPHYR"
help
Platform information for OpenThread
config OPENTHREAD_JAM_DETECTION
bool "Jam detection support"
help
Enable jam detection in OpenThread stack
config OT_PLAT_FLASH_PAGES_COUNT
int "Flash pages count used by OpenThread platform"
default 4
help
This option sets flash pages count used by OpenThread to store its settings. They are located at the end of flash.
endif