| # Kconfig - USB device stack configuration options |
| |
| # |
| # Copyright (c) 2016 Wind River Systems, Inc. |
| # |
| # SPDX-License-Identifier: Apache-2.0 |
| # |
| |
| menuconfig USB_DEVICE_STACK |
| bool "USB device stack" |
| depends on USB_DEVICE_DRIVER || ARCH_POSIX |
| help |
| Enable USB device stack. |
| |
| if USB_DEVICE_STACK |
| |
| module = USB_DEVICE |
| module-str = usb device |
| source "subsys/logging/Kconfig.template.log_config" |
| |
| config USB_DEVICE_VID |
| hex "USB Vendor ID" |
| default 0x2FE3 |
| help |
| USB device vendor ID. MUST be configured by vendor. |
| |
| config USB_DEVICE_PID |
| hex "USB Product ID" |
| default 0x100 |
| help |
| USB device product ID. MUST be configured by vendor. |
| |
| config USB_DEVICE_MANUFACTURER |
| string "USB manufacturer name" |
| default "ZEPHYR" |
| help |
| USB device Manufacturer string. MUST be configured by vendor. |
| |
| config USB_DEVICE_PRODUCT |
| string "USB product name" |
| default "USB-DEV" |
| help |
| USB device Product string. MUST be configured by vendor. |
| |
| config USB_DEVICE_SN |
| string "USB serial number" |
| default "ABCDEF012345" if USB_MASS_STORAGE |
| default "0.01" |
| help |
| USB device SerialNumber string. MUST be configured by vendor. |
| |
| config USB_COMPOSITE_DEVICE |
| bool "Enable composite device driver" |
| depends on USB |
| help |
| Enable composite USB device driver. |
| |
| config USB_COMPOSITE_BUFFER_SIZE |
| int "Set buffer size for Class Handler" |
| depends on USB_COMPOSITE_DEVICE |
| default 256 if USB_DEVICE_NETWORK_RNDIS |
| default 64 |
| |
| config USB_DEVICE_SOF |
| bool "Enable Start of Frame processing in events" |
| |
| config USB_DEVICE_REMOTE_WAKEUP |
| bool "Enable support for remote wakeup" |
| help |
| This option requires USBD peripheral driver to also support remote wakeup. |
| |
| config USB_DEVICE_BOS |
| bool "Enable USB Binary Device Object Store (BOS)" |
| |
| config USB_DEVICE_OS_DESC |
| bool "Enable MS OS Descriptors support" |
| |
| menuconfig USB_VBUS_GPIO |
| bool "Control VBUS via GPIO pin" |
| depends on GPIO |
| help |
| The USB VBUS signal is connected via a GPIO pin. |
| |
| if USB_VBUS_GPIO |
| |
| config USB_VBUS_GPIO_DEV_NAME |
| string "GPIO Device" |
| default "GPIO_0" |
| help |
| The device name of the GPIO device to which the USB_VBUS_EN signal is |
| connected. |
| |
| config USB_VBUS_GPIO_PIN_NUM |
| int "GPIO pin number" |
| default 0 |
| help |
| The number of the GPIO pin to which the USB_VBUS_EN signal is |
| connected. |
| |
| endif # USB_VBUS_GPIO |
| |
| source "subsys/usb/class/Kconfig" |
| |
| endif # USB_DEVICE_STACK |
