| # Kconfig.atmel_sam3 - Atmel SAM3 GPIO configuration options |
| # |
| # |
| # Copyright (c) 2016 Intel Corporation |
| # |
| # SPDX-License-Identifier: Apache-2.0 |
| # |
| |
| menuconfig GPIO_ATMEL_SAM3 |
| bool "Atmel SAM3 PIO Controllers" |
| depends on SOC_SERIES_SAM3X |
| help |
| Enable config options to support the PIO controllers |
| on Atmel SAM3 family processors. |
| |
| Says n if not sure. |
| |
| if GPIO_ATMEL_SAM3 |
| |
| config GPIO_ATMEL_SAM3_PORTA |
| bool "Enable driver for Atmel SAM3 PIO Port A" |
| help |
| Build the driver to utilize PIO controller Port A. |
| |
| config GPIO_ATMEL_SAM3_PORTA_DEV_NAME |
| string "Device name for Port A" |
| depends on GPIO_ATMEL_SAM3_PORTA |
| default "PIOA" |
| help |
| Device name for Port A. |
| |
| config GPIO_ATMEL_SAM3_PORTA_IRQ_PRI |
| int "Interrupt Priority for Port A" |
| depends on GPIO_ATMEL_SAM3_PORTA |
| default 3 |
| help |
| Interrupt priority for Port A. |
| |
| config GPIO_ATMEL_SAM3_PORTB |
| bool "Enable driver for Atmel SAM3 PIO Port B" |
| help |
| Build the driver to utilize PIO controller Port B. |
| |
| config GPIO_ATMEL_SAM3_PORTB_DEV_NAME |
| string "Device name for Port B" |
| depends on GPIO_ATMEL_SAM3_PORTB |
| default "PIOB" |
| help |
| Device name for Port B. |
| |
| config GPIO_ATMEL_SAM3_PORTB_IRQ_PRI |
| int "Interrupt Priority for Port B" |
| depends on GPIO_ATMEL_SAM3_PORTB |
| default 3 |
| help |
| Interrupt priority for Port B. |
| |
| config GPIO_ATMEL_SAM3_PORTC |
| bool "Enable driver for Atmel SAM3 PIO Port C" |
| help |
| Build the driver to utilize PIO controller Port C. |
| |
| config GPIO_ATMEL_SAM3_PORTC_DEV_NAME |
| string "Device name for Port C" |
| depends on GPIO_ATMEL_SAM3_PORTC |
| default "PIOC" |
| help |
| Device name for Port C. |
| |
| config GPIO_ATMEL_SAM3_PORTC_IRQ_PRI |
| int "Interrupt Priority for Port C" |
| depends on GPIO_ATMEL_SAM3_PORTC |
| default 3 |
| help |
| Interrupt priority for Port C. |
| |
| config GPIO_ATMEL_SAM3_PORTD |
| bool "Enable driver for Atmel SAM3 PIO Port D" |
| help |
| Build the driver to utilize PIO controller Port D. |
| |
| config GPIO_ATMEL_SAM3_PORTD_DEV_NAME |
| string "Device name for Port D" |
| depends on GPIO_ATMEL_SAM3_PORTD |
| default "PIOD" |
| help |
| Device name for Port D. |
| |
| config GPIO_ATMEL_SAM3_PORTD_IRQ_PRI |
| int "Interrupt Priority for Port D" |
| depends on GPIO_ATMEL_SAM3_PORTD |
| default 3 |
| help |
| Interrupt priority for Port D. |
| |
| endif # GPIO_ATMEL_SAM3 |
