| # Debug configuration options |
| |
| # Copyright (c) 2015 Wind River Systems, Inc. |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| |
| menu "System Monitoring Options" |
| |
| menuconfig THREAD_ANALYZER |
| bool "Thread analyzer" |
| depends on !ARCH_POSIX |
| select INIT_STACKS |
| select THREAD_MONITOR |
| select THREAD_STACK_INFO |
| select THREAD_RUNTIME_STATS |
| help |
| Enable thread analyzer functionality and all the required modules. |
| This module may be used to debug thread configuration issues, e.g. |
| stack size configuration to find stack overflow or to find stacks |
| which may be optimized. |
| |
| if THREAD_ANALYZER |
| module = THREAD_ANALYZER |
| module-str = thread analyzer |
| source "subsys/logging/Kconfig.template.log_config" |
| |
| choice |
| prompt "Thread analysis print mode" |
| default THREAD_ANALYZER_USE_PRINTK |
| |
| config THREAD_ANALYZER_USE_LOG |
| bool "Use logger output" |
| select LOG |
| help |
| Use logger output to print thread information. |
| |
| config THREAD_ANALYZER_USE_PRINTK |
| bool "Use printk function" |
| help |
| Use kernel printk function to print thread information. |
| |
| endchoice |
| |
| config THREAD_ANALYZER_ISR_STACK_USAGE |
| bool "Analyze interrupt stacks usage" |
| default y |
| |
| config THREAD_ANALYZER_RUN_UNLOCKED |
| bool "Run analysis with interrupts unlocked" |
| default y |
| help |
| The thread analysis takes quite a long time. |
| Every thread it finds is analyzed word by word to find any that |
| does not match the magic number. |
| Normally while thread are analyzed the k_thread_foreach function |
| is used. |
| While this is a safe run from the thread list perspective it may lock |
| the interrupts for a long time - long enough to disconnect when |
| Bluetooth communication is used. |
| Setting this flag will force thread analyzer to use |
| the k_thread_foreach_unlocked function. |
| This will allow the interrupts to be processed while the thread is |
| analyzed. |
| For the limitation of such configuration see the k_thread_foreach |
| documentation. |
| |
| config THREAD_ANALYZER_AUTO |
| bool "Run periodic thread analysis in a thread" |
| help |
| Run the thread analyzer automatically, without the need to add |
| any code to the application. |
| Thread analysis would be called periodically. |
| |
| if THREAD_ANALYZER_AUTO |
| |
| config THREAD_ANALYZER_AUTO_INTERVAL |
| int "Thread analysis interval" |
| default 60 |
| range 5 3600 |
| help |
| The time in seconds to call thread analyzer periodic printing function. |
| |
| config THREAD_ANALYZER_AUTO_STACK_SIZE |
| int "Stack size for the periodic thread analysis thread" |
| default 2048 if THREAD_ANALYZER_USE_LOG && LOG_MODE_IMMEDIATE && NO_OPTIMIZATIONS |
| default 1024 |
| |
| endif # THREAD_ANALYZER_AUTO |
| |
| endif # THREAD_ANALYZER |
| |
| |
| endmenu |
| |
| menu "Debugging Options" |
| |
| config DEBUG |
| bool "Build kernel with debugging enabled" |
| help |
| Build a kernel suitable for debugging. Right now, this option |
| only disables optimization, more debugging variants can be selected |
| from here to allow more debugging. |
| |
| config GPROF |
| bool "Generate profiling information" |
| depends on ARCH_POSIX |
| help |
| Generate call graph profile data for the application that can be |
| analyzed with gprof |
| |
| config ASAN |
| bool "Build with address sanitizer" |
| depends on ARCH_POSIX |
| help |
| Builds Zephyr with Address Sanitizer enabled. This is currently |
| only supported by boards based on the posix architecture, and requires a |
| recent-ish compiler with the ``-fsanitize=address`` command line option, |
| and the libasan library. |
| |
| Note that at exit leak detection is disabled for 64-bit boards when |
| GCC is used due to potential risk of a deadlock in libasan. |
| This behavior can be changes by adding leak_check_at_exit=1 to the |
| environment variable ASAN_OPTIONS. |
| |
| config ASAN_RECOVER |
| bool "Continue after sanitizer errors" |
| depends on ASAN |
| default y |
| help |
| The default behavior of compiler sanitizers is to exit after |
| the first error. Set this to y to enable the code to |
| continue, which can be useful if a code base has known |
| unsuppressed errors. You will also need to set |
| "halt_on_error=0" in your ASAN_OPTIONS environment variable |
| at runtime. |
| |
| config ASAN_NOP_DLCLOSE |
| bool "Override host OS dlclose() with a NOP" |
| default y if HAS_SDL |
| depends on ASAN |
| help |
| Override host OS dlclose() with a NOP. |
| |
| This NOP implementation is needed as workaround for a known limitation in |
| LSAN (leak sanitizer) that if dlcose is called before performing the leak |
| check, "<unknown module>" is reported in the stack traces during the leak |
| check and these can not be suppressed, see |
| https://github.com/google/sanitizers/issues/89 for more info. |
| |
| config UBSAN |
| bool "Build with undefined behavior sanitizer" |
| depends on ARCH_POSIX |
| help |
| Builds Zephyr with Undefined Behavior Sanitizer enabled. |
| This is currently only supported by boards based on the posix |
| architecture, and requires a recent-ish compiler with the |
| ``-fsanitize=undefined`` command line option. |
| |
| config MSAN |
| bool "Build with memory sanitizer" |
| depends on ARCH_POSIX |
| help |
| Builds Zephyr with the LLVM MemorySanitizer enabled. Works |
| only on the posix architecture currently, and only with host |
| compilers recent enough to support the feature (currently |
| clang on x86_64 only). It cannot be used in tandem with |
| CONFIG_ASAN due to clang limitations. You must choose one |
| or the other (but can combine it with CONFIG_UBSAN if you |
| like) |
| |
| config STACK_USAGE |
| bool "Generate stack usage information" |
| help |
| Generate an extra file that specifies the maximum amount of stack used, |
| on a per-function basis. |
| |
| config STACK_SENTINEL |
| bool "Stack sentinel" |
| select THREAD_STACK_INFO |
| depends on MULTITHREADING |
| depends on !USERSPACE |
| depends on !MPU_STACK_GUARD |
| help |
| Store a magic value at the lowest addresses of a thread's stack. |
| Periodically check that this value is still present and kill the |
| thread gracefully if it isn't. This is currently checked in four |
| places: |
| |
| 1) Upon any context switch for the outgoing thread |
| 2) Any hardware interrupt that doesn't context switch, the check is |
| performed for the interrupted thread |
| 3) When a thread returns from its entry point |
| 4) When a thread calls k_yield() but doesn't context switch |
| |
| This feature doesn't prevent corruption and the system may be |
| in an unusable state. However, given the bizarre behavior associated |
| with stack overflows, knowledge that this is happening is very |
| useful. |
| |
| This feature is intended for those systems which lack hardware support |
| for stack overflow protection, or have insufficient system resources |
| to use that hardware support. |
| |
| config PRINTK |
| bool "Send printk() to console" |
| default y |
| help |
| This option directs printk() debugging output to the supported |
| console device, rather than suppressing the generation |
| of printk() output entirely. Output is sent immediately, without |
| any mutual exclusion or buffering. |
| |
| config PRINTK_BUFFER_SIZE |
| int "printk() buffer size" |
| depends on PRINTK |
| depends on USERSPACE |
| default 32 |
| help |
| If userspace is enabled, printk() calls are buffered so that we do |
| not have to make a system call for every character emitted. Specify |
| the size of this buffer. |
| |
| config EARLY_CONSOLE |
| bool "Send stdout at the earliest stage possible" |
| help |
| This option will enable stdout as early as possible, for debugging |
| purpose. For instance, in case of STDOUT_CONSOLE being set it will |
| initialize its driver earlier than normal, in order to get the stdout |
| sent through the console at the earliest stage possible. |
| |
| config ASSERT |
| bool "__ASSERT() macro" |
| default y if TEST |
| help |
| This enables the __ASSERT() macro in the kernel code. If an assertion |
| fails, the policy for what to do is controlled by the implementation |
| of the assert_post_action() function, which by default will trigger |
| a fatal error. |
| |
| Disabling this option will cause assertions to compile to nothing, |
| improving performance and system footprint. |
| |
| if ASSERT |
| |
| config ASSERT_LEVEL |
| int "__ASSERT() level" |
| default 2 |
| range 0 2 |
| help |
| This option specifies the assertion level used by the __ASSERT() |
| macro. It can be set to one of three possible values: |
| |
| Level 0: off |
| Level 1: on + warning in every file that includes __assert.h |
| Level 2: on + no warning |
| |
| config SPIN_VALIDATE |
| bool "Spinlock validation" |
| depends on MULTITHREADING |
| depends on MP_MAX_NUM_CPUS <= 4 |
| default y if !FLASH || FLASH_SIZE > 32 |
| help |
| There's a spinlock validation framework available when asserts are |
| enabled. It adds a relatively hefty overhead (about 3k or so) to |
| kernel code size, don't use on platforms known to be small. |
| |
| config SPIN_LOCK_TIME_LIMIT |
| int "Spin lock holding time limit in cycles" |
| default 0 |
| depends on SPIN_VALIDATE |
| depends on SYSTEM_CLOCK_LOCK_FREE_COUNT |
| help |
| Assert at the time of unlocking the number of system clock cycles |
| the lock has been held is less than the configured value. Requires |
| the timer driver sys_clock_get_cycles_32() be lock free. |
| |
| endif # ASSERT |
| |
| config FORCE_NO_ASSERT |
| bool "Force-disable no assertions" |
| help |
| This boolean option disables Zephyr assertion testing even |
| in circumstances (twister) where it is enabled via |
| CFLAGS and not Kconfig. Added solely to be able to work |
| around compiler bugs for specific tests. |
| |
| config ASSERT_VERBOSE |
| bool "Verbose assertions" |
| default y |
| help |
| This option enables printing an assert message with information about |
| the assertion that occurred. This includes printing the location, |
| the conditional expression and additional message specific to the |
| assert. |
| |
| config ASSERT_NO_FILE_INFO |
| bool "Disable file info for asserts" |
| help |
| This option removes the name and the path of the source file |
| in which the assertion occurred. Enabling this will save |
| target code space, and thus may be necessary for tiny targets. |
| |
| config ASSERT_NO_COND_INFO |
| bool "Disable condition info for asserts" |
| help |
| This option removes the assert condition from the printed assert |
| message. Enabling this will save target code space, and thus may be |
| necessary for tiny targets. It is recommended to disable condition |
| info before disabling file info since the condition can be found in |
| the source using file info. |
| |
| config ASSERT_NO_MSG_INFO |
| bool "Disable message for asserts" |
| help |
| This option removes the additional message from the printed assert. |
| Enabling this will save target code space, and thus may be |
| necessary for tiny targets. It is recommended to disable message |
| before disabling file info since the message can be found in the |
| source using file info. |
| |
| config ASSERT_TEST |
| bool "Assert test mode" |
| help |
| This option enables the assert test mode, which allows the assert |
| post action handler to return (i.e. not abort) when the asserted |
| condition is false. The tests that validate the assert feature may |
| select this option to allow the test to proceed by implementing a |
| custom assert post action hook. |
| |
| config OVERRIDE_FRAME_POINTER_DEFAULT |
| bool "Override compiler defaults for -fomit-frame-pointer" |
| help |
| Omitting the frame pointer prevents the compiler from putting the stack |
| frame pointer into a register. Saves a few instructions in function |
| prologues/epilogues and frees up a register for general-purpose use, |
| which can provide good performance improvements on register-constrained |
| architectures like x86. On some architectures (including x86) omitting |
| frame pointers impedes debugging as local variables are harder to |
| locate. At -O1 and above gcc will enable -fomit-frame-pointer |
| automatically but only if the architecture does not require if for |
| effective debugging. |
| |
| Choose Y if you want to override the default frame pointer behavior |
| of your compiler, otherwise choose N. |
| |
| config OMIT_FRAME_POINTER |
| bool "Omit frame pointer" |
| depends on !FRAME_POINTER |
| depends on OVERRIDE_FRAME_POINTER_DEFAULT |
| help |
| Choose Y for best performance. On some architectures (including x86) |
| this will favor code size and performance over debuggability. |
| |
| Choose N in you wish to retain the frame pointer. This option may |
| be useful if your application uses runtime backtracing and does not |
| support parsing unwind tables. |
| |
| If unsure, disable OVERRIDE_FRAME_POINTER_DEFAULT to allow the compiler |
| to adopt sensible defaults for your architecture. |
| |
| |
| # |
| # Generic Debugging Options |
| # |
| config DEBUG_INFO |
| bool "System debugging information" |
| help |
| This option enables the addition of various information that can be |
| used by debuggers in debugging the system, or enable additional |
| debugging information to be reported at runtime. |
| |
| config EXCEPTION_STACK_TRACE |
| bool "Attempt to print stack traces upon exceptions" |
| default y |
| depends on (X86_EXCEPTION_STACK_TRACE || \ |
| ARM64_EXCEPTION_STACK_TRACE || \ |
| RISCV_EXCEPTION_STACK_TRACE) |
| help |
| If the architecture fatal handling code supports it, attempt to |
| print a stack trace of function memory addresses when an |
| exception is reported. |
| |
| config EXCEPTION_STACK_TRACE_MAX_FRAMES |
| int "Configures the depth of stack trace" |
| default ARCH_STACKWALK_MAX_FRAMES if ARCH_HAS_STACKWALK |
| default 8 |
| depends on EXCEPTION_STACK_TRACE |
| help |
| In the event of a stack trace, this place a limit on the depths |
| of the stack to examine. |
| |
| config EXCEPTION_STACK_TRACE_SYMTAB |
| bool "Print function names in the stack trace" |
| select SYMTAB |
| depends on EXCEPTION_STACK_TRACE |
| help |
| Enable this if you want to print the function names in the |
| stack trace output. This will generate the symtab and |
| can consume a lot of ROM if there's a lot of functions. |
| |
| # |
| # Miscellaneous debugging options |
| # |
| config DEBUG_THREAD_INFO |
| bool "Thread awareness support" |
| depends on !SMP |
| select THREAD_MONITOR |
| select THREAD_NAME |
| help |
| This option exports an array of offsets to kernel structs to allow |
| for debugger RTOS plugins to determine the state of running threads. |
| |
| rsource "coredump/Kconfig" |
| rsource "symtab/Kconfig" |
| endmenu |
| |
| rsource "gdbstub/Kconfig" |
| |
| config SEGGER_DEBUGMON |
| bool "Use Segger's J-Link debug monitor implementation" |
| depends on CORTEX_M_DEBUG_MONITOR_HOOK |
| help |
| This option will enable Segger's implementation of |
| the debug monitor interrupt, overriding the |
| default z_arm_debug_monitor symbol. |
| |
| config MIPI_STP_DECODER |
| bool "MIPI STPv2 decoder" |
| depends on !BIG_ENDIAN |
| help |
| Module decodes a stream of STPv2 data. |