| .. _zephyr_1.6: |
| |
| Zephyr Kernel 1.6.0 |
| #################### |
| |
| We are pleased to announce the release of Zephyr kernel version 1.6.0. This |
| release introduces the unified Kernel replacing the separate nano- and |
| micro-kernels and simplifying the overall Zephyr architecture and programming |
| interfaces. |
| Support for the ARM Cortex-M0/M0+ family was added and board support for |
| Cortex-M was expanded. |
| Additionally, this release adds many improvements for documentation, build |
| infrastructure, and testing. |
| |
| Major enhancements included with the release: |
| |
| * Introduced the Unified Kernel; the nano and micro kernel were removed. |
| * The legacy API is still supported but deprecated. |
| * Legacy tests and samples were moved to tests/legacy and samples/legacy. |
| * Unified kernel documentation was added and legacy nanokernel/microkernel |
| documentation was removed. |
| * Added support for several ARM Cortex-M boards |
| * Added support for USB mass storage and access to the filesystem. |
| * Added native Bluetooth Controller support. Currently nRF51 & nRF52 are supported. |
| |
| A detailed list of changes since v1.5.0 by component follows: |
| |
| Kernel |
| ****** |
| |
| * Introduced the unified kernel. |
| * Removed deprecated Tasks IRQs. |
| * Removed deprecated dynamic interrupt API. |
| * Added DLIST to operate in all elements of a doubly-linked list. |
| * SLIST: Added sys_slist_get() to fetch and remove the head, also Added |
| append_list and merge_slist. |
| * Added nano_work_pending to check if it is pending execution. |
| * Unified: Added support for k_malloc and k_free. |
| * Renamed kernel objects event to alert and memory map to memory slab. |
| * Changed memory pool, memory maps, message queues and event handling APIs. |
| |
| Architectures |
| ************* |
| |
| * ARC: Removed CONFIG_TIMER0_CLOCK_FREQ. |
| * ARC: Unified linker scripts. |
| * ARC: Removed dynamic interrupts. |
| * ARM: Added choice to use floating point ABI. |
| * ARM: Added NXP Kinetis kconfig options to configure clocks. |
| * ARM: Removed dynamic interrupts and exceptions. |
| * ARM: Atmel: Added constants and structures for watchdog registers. |
| * ARM: Added support for ARM Cortex-M0/M0+. |
| * x86: Removed dynamic interrupts and exceptions. |
| * x86: Declared internal API for interrupt controllers. |
| * x86: Changed IRQ controller to return -1 if cannot determine source vector. |
| * x86: Grouped Quark SoC's under intel_quark family. |
| * x86: Optimized and simplified IRQ and exception stubs. |
| |
| Boards |
| ****** |
| |
| * Renamed board Quark SE devboard to Quark SE C1000 devboard. |
| * Renamed board Quark SE SSS devboard to Quark SE C1000 SS devboard. |
| * Quark SE C1000: Disabled IPM and enabled UART0 on the Sensor Subsystem. |
| * Removed basic_cortex_m3 and basic_minuteia boards. |
| * Arduino 101: Removed backup/restore scripts. To restore original bootloader |
| use flashpack utility instead. |
| * Renamed nRF52 Nitrogen to 96Boards Nitrogen. |
| * Added ARM LTD Beetle SoC and V2M Beetle board. |
| * Added Texas Instruments CC3200 LaunchXL support. |
| * Added support for Nordic Semiconductor nRF51822. |
| * Added support for NXP Hexiwear board. |
| |
| Drivers and Sensors |
| ******************* |
| |
| * SPI: Fixed typos in SPI port numbers. |
| * Pinmux: Removed Quark dev unused file. |
| * I2C: Added KSDK shim driver. |
| * Ethernet: Added KSDK shim driver. |
| * Flash: Added KSDK shim driver |
| * I2C: Changed config parameters to SoC specific. |
| * QMSI: Implemented suspend and resume functions QMSI shim drivers |
| * Added HP206C sensor. |
| * Changed config_info pointers to const. |
| * Added support for SoCWatch driver. |
| * Added FXOS8700 accelerometer / magnetometer sensor driver. |
| |
| Networking |
| ********** |
| |
| * Minor fixes to uIP networking stack (This will be deprecated in 1.7) |
| |
| Bluetooth |
| ********* |
| |
| * Added native Bluetooth Controller support. Currently nRF51 & nRF52 are supported. |
| * New location for Controller & Host implementations: subsys/bluetooth/ |
| * Added raw HCI API to enable physical HCI transport for a Controller-only build. |
| * Added sample raw HCI apps for USB and UART. |
| * Added cross-transport pairing support for the Security Manager Protocol. |
| * Added RFCOMM support (for Bluetooth Classic) |
| * Added basic persistent storage support (filesystem-backed) |
| * Renamed bt_driver API to bt_hci_driver, in anticipation of Bluetooth radio drivers. |
| |
| Build Infrastructure |
| ******************** |
| |
| * Makefile: Changed outdir into board-specific directory to avoid build collisions. |
| * Makefile: Changed to use HOST_OS environment variable. |
| * Makefile: Added support for third party build systems. |
| * Sanity: Added support to filter using environment variables. |
| * Sanity: Added support for multiple toolchains. |
| * Sanity: Added ISSM and ARM GCC embedded toolchains to the supported toolchains. |
| * Sanity: Added extra arguments to be passed to the build. |
| * Sanity: Removed linker VMA/LMA offset check. |
| * Sysgen: Added --kernel_type argument. |
| * Modified build infrastructure to support unified kernel. |
| * SDK: Zephyr: Added check for minimum required version. |
| * Imported get_maintainer.pl from Linux kernel. |
| |
| Libraries |
| ********* |
| |
| * libc: Added subset of standard types in inttypes.h. |
| * libc: Added support for 'z' length specifier. |
| * libc: Removed stddef.h which is provided by the compiler. |
| * libc: printf: Improved code for printing. |
| * printk: Added support for modifiers. |
| * Added CoAP implementation for Zephyr. |
| * File system: Added API to grow or shrink a file. |
| * File system: Added API to get volume statistics. |
| * File system: Added API to flush cache of an opened file. |
| |
| HALs |
| **** |
| |
| * QMSI: Updated to version 1.3.1. |
| * HAL: Imported CC3200 SDK. |
| * Imported Nordic MDK nRF51 files. |
| * Imported Kinetis SDK Ethernet phy driver. |
| * Imported SDK RNGA driver. |
| |
| Documentation |
| ************* |
| |
| * Drivers: Improved Zephyr Driver model. |
| * Updated device power management API. |
| * Unified Kernel primer. |
| * Moved supported board information to the wiki.zephyrproject.org site. |
| * Revised documentation for Kernel Event logger and Timing. |
| |
| Test and Samples |
| **************** |
| |
| * Fixed incorrect printk usage. |
| * Removed test for dynamic exceptions. |
| * Added USB sample. |
| * Added tests and samples for CoAP client and server. |
| * Added philosophers unified sample. |
| * Removed printf/printk wrappers. |
| * Added Unified kernel API samples. |
| * Imported TinyCrypt test cases for CTR, ECC DSA and ECC DH algorithm. |
| |
| Deprecations |
| ************ |
| |
| * Deprecated microkernel and nanokernel APIs. |
| * Removed dynamic IRQs and exceptions. |
| * Removed Tasks IRQs. |
| |
| JIRA Related Items |
| ****************** |
| |
| * :jira:`ZEP-308` - Build System cleanup and Kernel / Application build separation |
| * :jira:`ZEP-334` - Unified Kernel |
| * :jira:`ZEP-766` - USB Mass Storage access to internal filesystem |
| * :jira:`ZEP-1090` - CPU x86 save/restore using new QMSI bootloader flow |
| * :jira:`ZEP-1173` - Add support for bonding remove |
| * :jira:`ZEP-48` - define API for interrupt controllers |
| * :jira:`ZEP-181` - Persistent storage APIs |
| * :jira:`ZEP-233` - Support USB mass storage device class |
| * :jira:`ZEP-237` - Support pre-built host tools |
| * :jira:`ZEP-240` - printk/printf usage in samples |
| * :jira:`ZEP-248` - Add a BOARD/SOC porting guide |
| * :jira:`ZEP-342` - USB DFU |
| * :jira:`ZEP-451` - Quark SE output by default redirected to IPM |
| * :jira:`ZEP-521` - ARM - add choice to floating point ABI selection |
| * :jira:`ZEP-546` - UART interrupts not triggered on ARC |
| * :jira:`ZEP-584` - warn user if SDK is out of date |
| * :jira:`ZEP-592` - Sanitycheck support for multiple toolchains |
| * :jira:`ZEP-605` - SMP over BR/EDR |
| * :jira:`ZEP-614` - Port TinyCrypt 2.0 test cases to Zephyr |
| * :jira:`ZEP-622` - Add FS API to truncate/shrink a file |
| * :jira:`ZEP-627` - Port Trickle support from Contiki into current stack |
| * :jira:`ZEP-635` - Add FS API to grow a file |
| * :jira:`ZEP-636` - Add FS API to get volume total and free space |
| * :jira:`ZEP-640` - Remove dynamic IRQs/exceptions from Zephyr |
| * :jira:`ZEP-653` - QMSI shim driver: Watchdog: Implement suspend and resume callbacks |
| * :jira:`ZEP-654` - QMSI shim driver: I2C: Implement suspend and resume callbacks |
| * :jira:`ZEP-657` - QMSI shim driver: AONPT: Implement suspend and resume callbacks |
| * :jira:`ZEP-661` - QMSI shim driver: SPI: Implement suspend and resume callbacks |
| * :jira:`ZEP-688` - unify duplicated sections of arch linker scripts |
| * :jira:`ZEP-715` - Add K64F clock configurations |
| * :jira:`ZEP-716` - Add Hexiwear board support |
| * :jira:`ZEP-717` - Add ksdk I2C shim driver |
| * :jira:`ZEP-718` - Add ksdk ethernet shim driver |
| * :jira:`ZEP-721` - Add FXOS8700 accelerometer/magnetometer sensor driver |
| * :jira:`ZEP-737` - Update host tools from upstream: fixdep.c |
| * :jira:`ZEP-740` - PWM API: Check if 'flags' argument is really required |
| * :jira:`ZEP-745` - Revisit design of PWM Driver API |
| * :jira:`ZEP-750` - Arduino 101 board should support one configuration using original bootloader |
| * :jira:`ZEP-758` - Rename Quark SE Devboard to its official name: Quark SE C1000 |
| * :jira:`ZEP-767` - Add FS API to flush cache of an open file |
| * :jira:`ZEP-775` - Enable USB CDC by default on Arduino 101 and redirect serial to USB |
| * :jira:`ZEP-783` - ARM Cortex-M0/M0+ support |
| * :jira:`ZEP-784` - Add support for Nordic Semiconductor nRF51822 SoC |
| * :jira:`ZEP-850` - remove obsolete boards basic_minuteia and basic_cortex_m3 |
| * :jira:`ZEP-906` - [unified] Add scheduler time slicing support |
| * :jira:`ZEP-907` - Test memory pool support (with mailboxes) |
| * :jira:`ZEP-908` - Add task offload to fiber support |
| * :jira:`ZEP-909` - Adapt tickless idle + power management for ARM |
| * :jira:`ZEP-910` - Adapt tickless idle for x86 |
| * :jira:`ZEP-912` - Finish renaming kernel object types |
| * :jira:`ZEP-916` - Eliminate kernel object API anomalies |
| * :jira:`ZEP-920` - Investigate malloc/free support |
| * :jira:`ZEP-921` - Miscellaneous documentation work |
| * :jira:`ZEP-922` - Revise documentation for Kernel Event Logger |
| * :jira:`ZEP-923` - Revise documentation for Timing |
| * :jira:`ZEP-924` - Revise documentation for Interrupts |
| * :jira:`ZEP-925` - API changes to message queues |
| * :jira:`ZEP-926` - API changes to memory pools |
| * :jira:`ZEP-927` - API changes to memory maps |
| * :jira:`ZEP-928` - API changes to event handling |
| * :jira:`ZEP-930` - Cut over to unified kernel |
| * :jira:`ZEP-933` - Unified kernel ARC port |
| * :jira:`ZEP-934` - NIOS_II port |
| * :jira:`ZEP-935` - Kernel logger support (validation) |
| * :jira:`ZEP-954` - Update device PM API to allow setting additional power states |
| * :jira:`ZEP-957` - Create example sample for new unified kernel API usage |
| * :jira:`ZEP-959` - sync checkpatch.pl with upstream Linux |
| * :jira:`ZEP-966` - need support for EM7D SOC on em_starterkit |
| * :jira:`ZEP-975` - DNS client port to new IP stack |
| * :jira:`ZEP-981` - Add doxygen documentation to both include/kernel.h and include/legacy.h |
| * :jira:`ZEP-989` - Cache next ready thread instead of finding out the long way |
| * :jira:`ZEP-993` - Quark SE (x86): Refactor save/restore execution context feature |
| * :jira:`ZEP-994` - Quark SE (ARC): Add PMA sample |
| * :jira:`ZEP-996` - Refactor save/restore feature from i2c_qmsi driver |
| * :jira:`ZEP-997` - Refactor save/restore feature from spi_qmsi driver |
| * :jira:`ZEP-998` - Refactor save/restore feature from uart_qmsi driver |
| * :jira:`ZEP-999` - Refactor save/restore feature from gpio_qmsi driver |
| * :jira:`ZEP-1000` - Refactor save/restore feature from rtc_qmsi driver |
| * :jira:`ZEP-1001` - Refactor save/restore feature from wdt_qmsi driver |
| * :jira:`ZEP-1002` - Refactor save/restore feature from counter_qmsi_aonpt driver |
| * :jira:`ZEP-1004` - Extend counter_qmsi_aon driver to support save/restore peripheral context |
| * :jira:`ZEP-1005` - Extend dma_qmsi driver to support save/restore peripheral context |
| * :jira:`ZEP-1006` - Extend soc_flash_qmsi driver to support save/restore peripheral context |
| * :jira:`ZEP-1008` - Extend pwm_qmsi driver to support save/restore peripheral context |
| * :jira:`ZEP-1023` - workq in Kernel primer for unified kernel |
| * :jira:`ZEP-1030` - Enable QMSI shim drivers of SoC peripherals on the sensor subsystem |
| * :jira:`ZEP-1043` - Update QMSI to 1.2 |
| * :jira:`ZEP-1045` - Add/Enhance shim layer to wrap SOC specific PM implementations |
| * :jira:`ZEP-1046` - Implement RAM sharing between bootloader and Zephyr |
| * :jira:`ZEP-1047` - Adapt to new PM related boot flow changes in QMSI boot loader |
| * :jira:`ZEP-1106` - Fix all test failures from TCF |
| * :jira:`ZEP-1107` - Update QMSI to 1.3 |
| * :jira:`ZEP-1109` - Texas Instruments CC3200 LaunchXL Support |
| * :jira:`ZEP-1119` - move top level usb/ to sys/usb |
| * :jira:`ZEP-1120` - move top level fs/ to sys/fs |
| * :jira:`ZEP-1121` - Add config support for enabling SoCWatch in Zephyr |
| * :jira:`ZEP-1140` - Add a unified kernel version of power_mgr sample app for testing PM code with the new kernel |
| * :jira:`ZEP-1188` - Add an API to retrieve pending interrupts for wake events |
| * :jira:`ZEP-1191` - Create wiki page for Hexiwear board |
| * :jira:`ZEP-1235` - Basic shell support for file system browsing |
| * :jira:`ZEP-1245` - ARM LTD V2M Beetle Support |
| * :jira:`ZEP-1313` - porting and user guides must include a security section |
| * :jira:`ZEP-1386` - Revise power management document to reflect latest changes |
| * :jira:`ZEP-199` - Zephyr driver model is undocumented |
| * :jira:`ZEP-436` - Test case tests/kernel/test_mem_safe fails on ARM hardware |
| * :jira:`ZEP-471` - Ethernet packet with multicast address is not working |
| * :jira:`ZEP-472` - Ethernet packets are getting missed if sent in quick succession. |
| * :jira:`ZEP-517` - build on windows failed "zephyr/Makefile:869: \*\*\* multiple target patterns" |
| * :jira:`ZEP-528` - ARC has 2 almost identical copies of the linker script |
| * :jira:`ZEP-577` - Sample application source does not compile on Windows |
| * :jira:`ZEP-601` - enable CONFIG_DEBUG_INFO |
| * :jira:`ZEP-602` - unhandled CPU exceptions/interrupts report wrong faulting vector if triggered by CPU |
| * :jira:`ZEP-615` - Un-supported flash erase size listed in SPI flash w25qxxdv driver header file |
| * :jira:`ZEP-639` - device_pm_ops structure should be defined as static |
| * :jira:`ZEP-686` - docs: Info in "Application Development Primer" and "Developing an Application and the Build System" is largely duplicated |
| * :jira:`ZEP-698` - samples/task_profiler issues |
| * :jira:`ZEP-707` - mem_safe test stomps on top of .data and bottom of .noinit |
| * :jira:`ZEP-724` - build on windows failed: 'make: execvp: uname: File or path name too long' |
| * :jira:`ZEP-733` - Minimal libc shouldn't be providing stddef.h |
| * :jira:`ZEP-762` - unexpected "abspath" and "notdir" from mingw make system |
| * :jira:`ZEP-777` - samples/driver/i2c_stts751: kconfig build warning from "select DMA_QMSI" |
| * :jira:`ZEP-778` - Samples/drivers/i2c_lsm9ds0: kconfig build warning from "select DMA_QMSI" |
| * :jira:`ZEP-779` - Using current MinGW gcc version 5.3.0 breaks Zephyr build on Windows |
| * :jira:`ZEP-845` - UART for ARC on Arduino 101 behaves unexpectedly |
| * :jira:`ZEP-905` - hello_world compilation for arduino_due target fails when using CROSS_COMPILE |
| * :jira:`ZEP-940` - Fail to get ATT response |
| * :jira:`ZEP-950` - USB: Device is not listed by USB20CV test suite |
| * :jira:`ZEP-961` - samples: other cases cannot execute after run aon_counter case |
| * :jira:`ZEP-967` - Sanity doesn't build 'samples/usb/dfu' with assertions (-R) |
| * :jira:`ZEP-970` - Sanity doesn't build 'tests/kernel/test_build' with assertions (-R) |
| * :jira:`ZEP-982` - Minimal libc has EWOULDBLOCK != EAGAIN |
| * :jira:`ZEP-1014` - [TCF] tests/bluetooth/init build fail |
| * :jira:`ZEP-1025` - Unified kernel build sometimes breaks on a missing .d dependency file. |
| * :jira:`ZEP-1027` - Documentation for GCC ARM is not accurate |
| * :jira:`ZEP-1031` - qmsi: dma: driver test fails with LLVM |
| * :jira:`ZEP-1048` - grove_lcd sample: sample does not work if you disable serial |
| * :jira:`ZEP-1051` - mpool allocation failed after defrag twice... |
| * :jira:`ZEP-1062` - Unified kernel isn't compatible with CONFIG_NEWLIB_LIBC |
| * :jira:`ZEP-1074` - ATT retrying misbehaves when ATT insufficient Authentication is received |
| * :jira:`ZEP-1076` - "samples/philosophers/unified" build failed with dynamic stack |
| * :jira:`ZEP-1077` - "samples/philosophers/unified" build warnings with NUM_PHIL<6 |
| * :jira:`ZEP-1079` - Licensing not clear for imported components |
| * :jira:`ZEP-1097` - ENC28J60 driver fails on concurrent tx and rx |
| * :jira:`ZEP-1098` - ENC28J60 fails to receive big data frames |
| * :jira:`ZEP-1100` - Current master still identifies itself as 1.5.0 |
| * :jira:`ZEP-1101` - SYS_KERNEL_VER_PATCHLEVEL() and friends artificially limit version numbers to 4 bits |
| * :jira:`ZEP-1124` - tests/kernel/test_sprintf/microkernel/testcase.ini#test failure on frdm_k64f |
| * :jira:`ZEP-1130` - region 'RAM' overflowed occurs while building test_hmac_prng |
| * :jira:`ZEP-1138` - Received packets not being passed to upper layer from IP stack when using ENC28J60 driver |
| * :jira:`ZEP-1139` - Fix build error when power management is built with unified kernel |
| * :jira:`ZEP-1141` - TinyCrypt SHA256 test fails with system crash using unified kernel type |
| * :jira:`ZEP-1144` - TinyCrypt AES128 fixed-key with variable-text test fails using unified kernel type |
| * :jira:`ZEP-1145` - system hang after TinyCrypt HMAC test |
| * :jira:`ZEP-1146` - zephyrproject.org home page needs technical scrub for 1.6 release |
| * :jira:`ZEP-1149` - port ztest framework to unified kernel |
| * :jira:`ZEP-1154` - tests/samples failing with unified kernel |
| * :jira:`ZEP-1155` - Fix filesystem API namespace |
| * :jira:`ZEP-1163` - LIB_INCLUDE_DIR is clobbered in Makefile second pass |
| * :jira:`ZEP-1164` - ztest skip waiting the test case to finish its execution |
| * :jira:`ZEP-1179` - Build issues when compiling with LLVM from ISSM (icx) |
| * :jira:`ZEP-1182` - kernel.h doxygen show unexpected "asm" blocks |
| * :jira:`ZEP-1183` - btshell return "panic: errcode -1" when init bt |
| * :jira:`ZEP-1195` - Wrong ATT error code passed to the application |
| * :jira:`ZEP-1199` - [L2CAP] No credits to receive packet |
| * :jira:`ZEP-1219` - [L2CAP] Data sent exceeds maximum PDU size |
| * :jira:`ZEP-1221` - Connection Timeout during pairing |
| * :jira:`ZEP-1226` - cortex M7 port assembler error |
| * :jira:`ZEP-1227` - ztest native testing not working in unified kernel |
| * :jira:`ZEP-1232` - Daily build is failing asserts |
| * :jira:`ZEP-1234` - Removal of fiber* APIs due to unified migration breaks USB mass storage patchset |
| * :jira:`ZEP-1247` - Test tests/legacy/benchmark/latency_measure is broken for daily sanitycheck |
| * :jira:`ZEP-1252` - Test test_chan_blen_transfer does not build for quark_d2000_crb |
| * :jira:`ZEP-1277` - Flash driver (w25qxxdv) erase function is not checking for offset alignment |
| * :jira:`ZEP-1278` - Incorrect boundary check in flash driver (w25qxxdv) for erase offset |
| * :jira:`ZEP-1287` - ARC SPI 1 Port is not working |
| * :jira:`ZEP-1289` - Race condition with k_sem_take |
| * :jira:`ZEP-1291` - libzephyr.a dependency on phony "gcc" target |
| * :jira:`ZEP-1293` - ENC28J60 driver doesn't work on Arduino 101 |
| * :jira:`ZEP-1295` - incorrect doxygen comment in kernel.h:k_work_pending() |
| * :jira:`ZEP-1297` - test/legacy/kernel/test_mail: failure on ARC platforms |
| * :jira:`ZEP-1299` - System can't resume completely with DMA suspend and resume operation |
| * :jira:`ZEP-1302` - ENC28J60 fails with rx/tx of long frames |
| * :jira:`ZEP-1303` - Configuration talks about >32 thread prios, but the kernel does not support it |
| * :jira:`ZEP-1309` - ARM uses the end of memory for its init stack |
| * :jira:`ZEP-1310` - ARC uses the end of memory for its init stack |
| * :jira:`ZEP-1312` - ARC: software crashed at k_mbox_get() with async sending a message |
| * :jira:`ZEP-1319` - Zephyr is unable to compile when CONFIG_RUNTIME_NMI is enabled on ARM platforms |
| * :jira:`ZEP-1341` - power_states test app passes wrong value as power state to post_ops functions |
| * :jira:`ZEP-1343` - tests/drivers/pci_enum: failing on QEMU ARM and X86 due to missing commit |
| * :jira:`ZEP-1345` - cpu context save and restore could corrupt stack |
| * :jira:`ZEP-1349` - ARC sleep needs to pass interrupt priority threshold when interrupts are enabled |
| * :jira:`ZEP-1353` - FDRM k64f Console output broken on normal flash mode |
| |
| Known Issues |
| ************ |
| |
| * :jira:`ZEP-1405` - function l2cap_br_conn_req in /subsys/bluetooth/host/l2cap_br.c |
| references uninitialized pointer |
| |
| |
