blob: b9f1d1ad1006c1f07ef93e9f0ccfe3e0f254a24b [file] [log] [blame]
.. _tfm_psa_firmware:
TF-M PSA Firmware
This TF-M integration example demonstrates how to use the PSA Firmware API
to retrieve information about the current firmware, or implement a custom
firmware update process.
Trusted Firmware (TF-M) Platform Security Architecture (PSA) APIs
are used for the secure processing environment, with Zephyr running in the
non-secure processing environment.
It uses **IPC Mode** for communication, where an IPC mechanism is inserted to
handle secure TF-M API calls and responses. The OS-specific code to handle
the IPC calls is in ``tfm_ipc.c``.
The sample prints test info to the console either as a single-thread or
multi-thread application.
Building and Running
This project needs another firmware as the update payload. It must use another
example's hex file, and should be specified on the command line
as ZEPHYR_FIRMWARE_UPDATE_SAMPLE_BUILD. For example, to use the sample
`tfm_integration/tfm_ipc` as the payload:
.. code-block:: bash
west build -p -b lpcxpresso5s69_ns samples/tfm_integration/psa_firmware \
-d build/lpcxpresso55s69_ns/tfm_integration/psa_firmware
-- -DCONFIG_FIRMWARE_UPDATE_IMAGE=`realpath build/lpcxpresso55s69_ns/tfm_integration/tfm_ipc/zephyr_ns_signed.hex`
This project outputs startup status and info to the console. It can be built and
executed on an ARM Cortex M33 target board or QEMU.
This sample will only build on a Linux or macOS development system
(not Windows), and has been tested on the following setups:
- macOS Big Sur using QEMU 6.0.0 with gcc-arm-none-eabi-9-2020-q2-update
- Linux (NixOS) using QEMU 6.2.50 with gcc from Zephyr SDK 0.13.2
On MPS3 AN547:
1. Build Zephyr with a non-secure configuration
Using ``west``
.. zephyr-app-commands::
:zephyr-app: samples/tfm_integration/psa_firmware
:host-os: unix
:board: mps3_an547_ns
:goals: run
2. Copy application binary files (mcuboot.bin and tfm_sign.bin) to
``<MPS3 device name>/SOFTWARE/``.
3. Edit (e.g., with vim) the ``<MPS3 device name>/MB/HBI0263C/AN547/images.txt``
file, and update it as shown below:
.. code-block:: bash
TITLE: Versatile Express Images Configuration File
TOTALIMAGES: 2 ;Number of Images (Max: 32)
IMAGE0ADDRESS: 0x10000000
IMAGE0FILE: \SOFTWARE\mcuboot.bin ; BL2 bootloader
IMAGE1ADDRESS: 0x10080000
IMAGE1FILE: \SOFTWARE\tfm_sign.bin ; TF-M with application binary blob
4. Save the file, exit the editor, and reset the MPS3 board.
Build Zephyr with a non-secure configuration (``-DBOARD=mps3_an547_ns``)
and run it in qemu via the ``run`` command.
Using ``west``
.. zephyr-app-commands::
:zephyr-app: samples/tfm_integration/psa_firmware
:host-os: unix
:board: mps3_an547_ns
:goals: run
On LPCxpresso55S69:
Build Zephyr with a non-secure configuration:
.. code-block:: bash
$ west build -p -b lpcxpresso55s69_ns samples/tfm_integration/psa_firmware/ --
Make sure your board is set up with :ref:`lpclink2-jlink-onboard-debug-probe`,
since this isn't the debug interface boards ship with from the factory;
Next we need to manually flash the resulting image (``tfm_merged.bin``) with a
J-Link as follows:
.. code-block:: console
JLinkExe -device lpc55s69 -if swd -speed 2000 -autoconnect 1
J-Link>loadfile build/tfm_merged.bin
Resetting the board and erasing it will unlock the board, this is useful in case
it's in an unknown state and can't be flashed.
We need to reset the board manually after flashing the image to run this code.
Sample Output
.. code-block:: console
[INF] Beginning TF-M provisioning
[WRN] TFM_DUMMY_PROVISIONING is not suitable for production! This device is NOT SECURE
[Sec Thread] Secure image initializing!
TF-M FP mode: Software
Booting TFM v1.5.0
Creating an empty ITS flash layout.
Creating an empty PS flash layout.
*** Booting Zephyr OS build v3.0.0-rc1-321-gbe26b6a260d6 ***
PSA Firmware API test
Active NS image version: 0.0.0-0
Starting FWU; Writing Firmware from 21000000 size 58466 bytes
Wrote Firmware; Writing Header from 2100e462 size 432 bytes
Wrote Header; Installing Image
Installed New Firmware; Reboot Needed; Rebooting
[WRN] This device was provisioned with dummy keys. This device is NOT SECURE
[Sec Thread] Secure image initializing!
TF-M FP mode: Software
Booting TFM v1.5.0
*** Booting Zephyr OS build v3.0.0-rc1-35-g03f2993ef07b ***
Hello World from UserSpace! mps3_an547