| /* |
| * Copyright (c) 2023 Prevas A/S |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| * |
| */ |
| |
| #define DT_DRV_COMPAT st_stm32_rtc |
| |
| #include <errno.h> |
| #include <zephyr/device.h> |
| #include <zephyr/kernel.h> |
| #include <zephyr/init.h> |
| #include <zephyr/devicetree.h> |
| #include <zephyr/drivers/rtc.h> |
| #include <zephyr/drivers/clock_control/stm32_clock_control.h> |
| #include <zephyr/drivers/clock_control.h> |
| #include <soc.h> |
| #include <stm32_ll_pwr.h> |
| #include <stm32_ll_rcc.h> |
| #include <stm32_ll_rtc.h> |
| #include <stm32_hsem.h> |
| |
| #include <zephyr/logging/log.h> |
| |
| LOG_MODULE_REGISTER(rtc_stm32, CONFIG_RTC_LOG_LEVEL); |
| |
| /* Convert calendar start time */ |
| /* RTC start time: 1st, Jan, 2000 */ |
| /* struct tm start: 1st, Jan, 1900 */ |
| #define TM_TO_RTC_OFFSET 100 |
| |
| struct rtc_stm32_config { |
| LL_RTC_InitTypeDef ll_rtc_config; |
| const struct stm32_pclken *pclken; |
| }; |
| |
| struct rtc_stm32_data { |
| /* Currently empty */ |
| }; |
| |
| static int rtc_stm32_init(const struct device *dev) |
| { |
| const struct device *const clk = DEVICE_DT_GET(STM32_CLOCK_CONTROL_NODE); |
| const struct rtc_stm32_config *cfg = dev->config; |
| |
| if (!device_is_ready(clk)) { |
| LOG_ERR("clock control device not ready"); |
| return -ENODEV; |
| } |
| |
| /* Enable RTC bus clock */ |
| if (clock_control_on(clk, (clock_control_subsys_t)&cfg->pclken[0]) != 0) { |
| LOG_ERR("clock op failed\n"); |
| return -EIO; |
| } |
| |
| /* Enable Backup access */ |
| z_stm32_hsem_lock(CFG_HW_RCC_SEMID, HSEM_LOCK_DEFAULT_RETRY); |
| #if defined(PWR_CR_DBP) || defined(PWR_CR1_DBP) || defined(PWR_DBPCR_DBP) || defined(PWR_DBPR_DBP) |
| LL_PWR_EnableBkUpAccess(); |
| #endif /* PWR_CR_DBP || PWR_CR1_DBP || PWR_DBPR_DBP */ |
| |
| /* Enable RTC clock source */ |
| if (clock_control_configure(clk, (clock_control_subsys_t)&cfg->pclken[1], NULL) != 0) { |
| LOG_ERR("clock configure failed\n"); |
| return -EIO; |
| } |
| |
| LL_RCC_EnableRTC(); |
| |
| z_stm32_hsem_unlock(CFG_HW_RCC_SEMID); |
| |
| if (LL_RTC_Init(RTC, ((LL_RTC_InitTypeDef *)&cfg->ll_rtc_config)) != SUCCESS) { |
| return -EIO; |
| } |
| |
| #ifdef RTC_CR_BYPSHAD |
| LL_RTC_DisableWriteProtection(RTC); |
| LL_RTC_EnableShadowRegBypass(RTC); |
| LL_RTC_EnableWriteProtection(RTC); |
| #endif /* RTC_CR_BYPSHAD */ |
| |
| return 0; |
| } |
| |
| static const struct stm32_pclken rtc_clk[] = STM32_DT_INST_CLOCKS(0); |
| |
| static const struct rtc_stm32_config rtc_config = { |
| .ll_rtc_config = { |
| .HourFormat = LL_RTC_HOURFORMAT_24HOUR, |
| #if DT_INST_CLOCKS_CELL(1, bus) == STM32_SRC_LSI |
| /* prescaler values for LSI @ 32 KHz */ |
| .AsynchPrescaler = 0x7F, |
| .SynchPrescaler = 0x00F9, |
| #else /* DT_INST_CLOCKS_CELL(1, bus) == STM32_SRC_LSE */ |
| /* prescaler values for LSE @ 32768 Hz */ |
| .AsynchPrescaler = 0x7F, |
| .SynchPrescaler = 0x00FF, |
| #endif |
| }, |
| .pclken = rtc_clk, |
| }; |
| |
| static int rtc_stm32_set_time(const struct device *dev, const struct rtc_time *timeptr) |
| { |
| LOG_INF("Setting clock"); |
| LL_RTC_DisableWriteProtection(RTC); |
| |
| LL_RTC_EnableInitMode(RTC); |
| |
| while (!LL_RTC_IsActiveFlag_INIT(RTC)) { |
| }; |
| |
| LL_RTC_DATE_SetYear(RTC, __LL_RTC_CONVERT_BIN2BCD(timeptr->tm_year - TM_TO_RTC_OFFSET)); |
| LL_RTC_DATE_SetMonth(RTC, __LL_RTC_CONVERT_BIN2BCD(timeptr->tm_mon + 1)); |
| LL_RTC_DATE_SetDay(RTC, __LL_RTC_CONVERT_BIN2BCD(timeptr->tm_mday)); |
| |
| LL_RTC_DATE_SetWeekDay(RTC, __LL_RTC_CONVERT_BIN2BCD(timeptr->tm_wday) + 1); |
| |
| LL_RTC_TIME_SetHour(RTC, __LL_RTC_CONVERT_BIN2BCD(timeptr->tm_hour)); |
| LL_RTC_TIME_SetMinute(RTC, __LL_RTC_CONVERT_BIN2BCD(timeptr->tm_min)); |
| LL_RTC_TIME_SetSecond(RTC, __LL_RTC_CONVERT_BIN2BCD(timeptr->tm_sec)); |
| |
| LL_RTC_DisableInitMode(RTC); |
| |
| LL_RTC_EnableWriteProtection(RTC); |
| |
| return 0; |
| } |
| |
| static int rtc_stm32_get_time(const struct device *dev, struct rtc_time *timeptr) |
| { |
| ARG_UNUSED(dev); |
| |
| uint32_t rtc_date, rtc_time; |
| |
| /* Read time and date registers */ |
| rtc_time = LL_RTC_TIME_Get(RTC); |
| rtc_date = LL_RTC_DATE_Get(RTC); |
| |
| timeptr->tm_year = TM_TO_RTC_OFFSET + __LL_RTC_CONVERT_BCD2BIN(__LL_RTC_GET_YEAR(rtc_date)); |
| /* tm_mon allowed values are 0-11 */ |
| timeptr->tm_mon = __LL_RTC_CONVERT_BCD2BIN(__LL_RTC_GET_MONTH(rtc_date)) - 1; |
| timeptr->tm_mday = __LL_RTC_CONVERT_BCD2BIN(__LL_RTC_GET_DAY(rtc_date)); |
| timeptr->tm_wday = __LL_RTC_CONVERT_BCD2BIN(__LL_RTC_GET_WEEKDAY(rtc_date)) - 1; |
| |
| timeptr->tm_hour = __LL_RTC_CONVERT_BCD2BIN(__LL_RTC_GET_HOUR(rtc_time)); |
| timeptr->tm_min = __LL_RTC_CONVERT_BCD2BIN(__LL_RTC_GET_MINUTE(rtc_time)); |
| timeptr->tm_sec = __LL_RTC_CONVERT_BCD2BIN(__LL_RTC_GET_SECOND(rtc_time)); |
| |
| timeptr->tm_nsec = LL_RTC_TIME_GetSubSecond(RTC); |
| |
| return 0; |
| } |
| |
| struct rtc_driver_api rtc_stm32_driver_api = { |
| .set_time = rtc_stm32_set_time, |
| .get_time = rtc_stm32_get_time, |
| /* RTC_ALARM not supported */ |
| /* RTC_UPDATE not supported */ |
| }; |
| |
| #define RTC_STM32_DEV_CFG(n) \ |
| static struct rtc_stm32_data rtc_data_##n = {}; \ |
| \ |
| DEVICE_DT_INST_DEFINE(n, &rtc_stm32_init, NULL, &rtc_data_##n, &rtc_config, POST_KERNEL, \ |
| CONFIG_RTC_INIT_PRIORITY, &rtc_stm32_driver_api); |
| |
| DT_INST_FOREACH_STATUS_OKAY(RTC_STM32_DEV_CFG); |