| # Kconfig - drivers configuration options for SeeedStudio Grove Devices |
| |
| # |
| # Copyright (c) 2015 Intel Corporation |
| # |
| # SPDX-License-Identifier: Apache-2.0 |
| # |
| |
| |
| menuconfig GROVE |
| bool |
| prompt "Grove Device Drivers" |
| default n |
| help |
| Check this box to enable the Seeed Grove device drivers |
| |
| |
| config SYS_LOG_GROVE_LEVEL |
| int |
| prompt "Grove Log level" |
| depends on SYS_LOG && GROVE |
| default 0 |
| range 0 4 |
| help |
| Sets log level for Grove Device Drivers. |
| Levels are: |
| 0 OFF, do not write |
| 1 ERROR, only write SYS_LOG_ERR |
| 2 WARNING, write SYS_LOG_WRN in addition to previous level |
| 3 INFO, write SYS_LOG_INF in addition to previous levels |
| 4 DEBUG, write SYS_LOG_DBG in addition to previous levels |
| |
| config GROVE_LCD_RGB |
| bool |
| default n |
| depends on GROVE |
| prompt "Enable the Seeed Grove LCD RGB Backlight" |
| help |
| Setting this value will enable driver support for the Groove-LCD RGB |
| Backlight. |
| |
| config GROVE_LCD_RGB_I2C_MASTER_DEV_NAME |
| string "I2C Master where Grove LCD is connected" |
| depends on GROVE_LCD_RGB |
| default "I2C_0" |
| help |
| Specify the device name of the I2C master device to which the |
| Grove LCD is connected. |
| |
| config GROVE_LIGHT_SENSOR |
| bool |
| prompt "Enable the Seeed Grove Light Sensor" |
| depends on SENSOR && GROVE && ADC && NEWLIB_LIBC |
| default n |
| help |
| Setting this value will enable driver support for the Grove Light |
| Sensor. |
| |
| config GROVE_LIGHT_SENSOR_NAME |
| string |
| prompt "Driver name" |
| depends on GROVE_LIGHT_SENSOR |
| default "GROVE_LIGHT_SENSOR" |
| help |
| Specify the device name with which the sensor is identified. |
| |
| config GROVE_LIGHT_SENSOR_ADC_DEV_NAME |
| string |
| prompt "ADC where Grove Light Sensor is connected" |
| depends on GROVE_LIGHT_SENSOR |
| default "ADC_0" |
| help |
| Specify the device name of the ADC to which the Grove Light Sensor |
| is connected. |
| |
| config GROVE_LIGHT_SENSOR_ADC_CHANNEL |
| int |
| prompt "ADC channel used by Grove Light Sensor" |
| depends on GROVE_LIGHT_SENSOR |
| default 10 |
| help |
| Specify the channel of the ADC to which the Grove Light Sensor is |
| connected. |
| |
| config GROVE_TEMPERATURE_SENSOR |
| bool |
| prompt "Enable the Seeed Grove Temperature Sensor" |
| depends on SENSOR && GROVE && ADC && NEWLIB_LIBC |
| default n |
| help |
| Setting this value will enable driver support for the Grove |
| Temperature Sensor. |
| |
| config GROVE_TEMPERATURE_SENSOR_NAME |
| string |
| prompt "Driver name" |
| depends on GROVE_TEMPERATURE_SENSOR |
| default "GROVE_TEMPERATURE_SENSOR" |
| help |
| Specify the device name with which the Grove Temperature Sensor |
| is identified. |
| |
| choice |
| prompt "Sensor version" |
| depends on GROVE_TEMPERATURE_SENSOR |
| default GROVE_TEMPERATURE_SENSOR_V1_0 |
| help |
| Choose the version of the Grove Temperature Sensor. |
| |
| config GROVE_TEMPERATURE_SENSOR_V1_0 |
| bool |
| prompt "v1.0" |
| help |
| Version 1.0 |
| |
| config GROVE_TEMPERATURE_SENSOR_V1_X |
| bool |
| prompt "v1.1/v1.2" |
| help |
| Version 1.1 or 1.2 |
| |
| endchoice |
| |
| config GROVE_TEMPERATURE_SENSOR_ADC_DEV_NAME |
| string |
| prompt "ADC where Grove Temperature Sensor is connected" |
| depends on GROVE_TEMPERATURE_SENSOR |
| default "ADC_0" |
| help |
| Specify the device name of the ADC to which the Grove Temperature |
| Sensor is connected. |
| |
| config GROVE_TEMPERATURE_SENSOR_ADC_CHANNEL |
| int |
| prompt "ADC channel used by Grove Temperature Sensor" |
| depends on GROVE_TEMPERATURE_SENSOR |
| default 10 |
| help |
| Specify the channel of the ADC to which the Grove Temperature Sensor |
| is connected. |
