| # Kconfig - USB class drivers configuration options |
| |
| # |
| # Copyright (c) 2016 Wind River Systems, Inc. |
| # |
| # SPDX-License-Identifier: Apache-2.0 |
| # |
| |
| if USB_DEVICE_STACK |
| |
| config USB_CDC_ACM |
| bool |
| prompt "USB CDC ACM Device Class Driver" |
| default n |
| help |
| USB CDC ACM device class driver |
| |
| config CDC_ACM_PORT_NAME |
| string "CDC ACM class device driver port name" |
| depends on USB_CDC_ACM |
| default "CDC_ACM" |
| help |
| Port name through which CDC ACM class device driver is accessed |
| |
| config CDC_ACM_INT_EP_ADDR |
| hex "CDC ACM Interrupt Endpoint address" |
| depends on USB_CDC_ACM |
| default 0x85 |
| range 0x81 0x8f |
| help |
| CDC ACM class interrupt endpoint address |
| |
| config CDC_ACM_IN_EP_ADDR |
| hex "CDC ACM BULK IN Endpoint address" |
| depends on USB_CDC_ACM |
| default 0x84 |
| range 0x81 0x8f |
| help |
| CDC ACM class IN endpoint address |
| |
| config CDC_ACM_OUT_EP_ADDR |
| hex "CDC ACM BULK OUT Endpoint address" |
| depends on USB_CDC_ACM |
| default 0x03 |
| range 0x01 0x0f |
| help |
| CDC ACM class OUT endpoint address |
| |
| config CDC_ACM_INTERRUPT_EP_MPS |
| int |
| depends on USB_CDC_ACM |
| default 16 |
| help |
| CDC ACM class interrupt IN endpoint size |
| |
| config CDC_ACM_BULK_EP_MPS |
| int |
| depends on USB_CDC_ACM |
| default 64 |
| help |
| CDC ACM class bulk endpoints size |
| |
| config SYS_LOG_USB_CDC_ACM_LEVEL |
| int |
| prompt "USB CDC ACM device class driver log level" |
| depends on USB_CDC_ACM && SYS_LOG |
| default 0 |
| help |
| Sets log level for USB CDC ACM device class driver |
| |
| Levels are: |
| |
| - 0 OFF, do not write |
| |
| - 1 ERROR, only write SYS_LOG_ERR |
| |
| - 2 WARNING, write SYS_LOG_WRN in addition to previous level |
| |
| - 3 INFO, write SYS_LOG_INF in addition to previous levels |
| |
| - 4 DEBUG, write SYS_LOG_DBG in addition to previous levels |
| |
| config USB_MASS_STORAGE |
| bool |
| prompt "USB Mass Storage Device Class Driver" |
| select DISK_ACCESS |
| default n |
| help |
| USB Mass Storage device class driver |
| |
| config MASS_STORAGE_IN_EP_ADDR |
| hex |
| depends on USB_MASS_STORAGE |
| default 0x82 |
| range 0x81 0x8f |
| help |
| Mass storage device class IN endpoint address |
| |
| config MASS_STORAGE_OUT_EP_ADDR |
| hex |
| depends on USB_MASS_STORAGE |
| default 0x01 |
| range 0x01 0x0f |
| help |
| Mass storage device class OUT endpoint address |
| |
| config MASS_STORAGE_BULK_EP_MPS |
| int |
| depends on USB_MASS_STORAGE |
| default 64 |
| range 8 64 |
| help |
| Mass storage device class bulk endpoints size |
| |
| config SYS_LOG_USB_MASS_STORAGE_LEVEL |
| int |
| prompt "USB Mass Storage device class driver log level" |
| depends on USB_MASS_STORAGE && SYS_LOG |
| default 0 |
| help |
| Sets log level for USB Mass Storage device class driver |
| |
| Levels are: |
| |
| - 0 OFF, do not write |
| |
| - 1 ERROR, only write SYS_LOG_ERR |
| |
| - 2 WARNING, write SYS_LOG_WRN in addition to previous level |
| |
| - 3 INFO, write SYS_LOG_INF in addition to previous levels |
| |
| - 4 DEBUG, write SYS_LOG_DBG in addition to previous levels |
| |
| source "subsys/usb/class/netusb/Kconfig" |
| |
| endif # CONFIG_USB_DEVICE_STACK |
