|  | /* | 
|  | * Copyright (c) 2020 Vestas Wind Systems A/S | 
|  | * | 
|  | * SPDX-License-Identifier: Apache-2.0 | 
|  | */ | 
|  |  | 
|  | #define DT_DRV_COMPAT nxp_kinetis_lptmr | 
|  |  | 
|  | #include <zephyr/drivers/counter.h> | 
|  | #include <zephyr/irq.h> | 
|  | #include <fsl_lptmr.h> | 
|  |  | 
|  | struct mcux_lptmr_config { | 
|  | struct counter_config_info info; | 
|  | LPTMR_Type *base; | 
|  | lptmr_prescaler_clock_select_t clk_source; | 
|  | lptmr_prescaler_glitch_value_t prescaler_glitch; | 
|  | bool bypass_prescaler_glitch; | 
|  | lptmr_timer_mode_t mode; | 
|  | lptmr_pin_select_t pin; | 
|  | lptmr_pin_polarity_t polarity; | 
|  | void (*irq_config_func)(const struct device *dev); | 
|  | }; | 
|  |  | 
|  | struct mcux_lptmr_data { | 
|  | counter_top_callback_t top_callback; | 
|  | void *top_user_data; | 
|  | }; | 
|  |  | 
|  | static int mcux_lptmr_start(const struct device *dev) | 
|  | { | 
|  | const struct mcux_lptmr_config *config = dev->config; | 
|  |  | 
|  | LPTMR_EnableInterrupts(config->base, | 
|  | kLPTMR_TimerInterruptEnable); | 
|  | LPTMR_StartTimer(config->base); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int mcux_lptmr_stop(const struct device *dev) | 
|  | { | 
|  | const struct mcux_lptmr_config *config = dev->config; | 
|  |  | 
|  | LPTMR_DisableInterrupts(config->base, | 
|  | kLPTMR_TimerInterruptEnable); | 
|  | LPTMR_StopTimer(config->base); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int mcux_lptmr_get_value(const struct device *dev, uint32_t *ticks) | 
|  | { | 
|  | const struct mcux_lptmr_config *config = dev->config; | 
|  |  | 
|  | *ticks = LPTMR_GetCurrentTimerCount(config->base); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int mcux_lptmr_set_top_value(const struct device *dev, | 
|  | const struct counter_top_cfg *cfg) | 
|  | { | 
|  | const struct mcux_lptmr_config *config = dev->config; | 
|  | struct mcux_lptmr_data *data = dev->data; | 
|  |  | 
|  | if (cfg->ticks == 0) { | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | data->top_callback = cfg->callback; | 
|  | data->top_user_data = cfg->user_data; | 
|  |  | 
|  | if (config->base->CSR & LPTMR_CSR_TEN_MASK) { | 
|  | /* Timer already enabled, check flags before resetting */ | 
|  | if (cfg->flags & COUNTER_TOP_CFG_DONT_RESET) { | 
|  | return -ENOTSUP; | 
|  | } | 
|  | LPTMR_StopTimer(config->base); | 
|  | LPTMR_SetTimerPeriod(config->base, cfg->ticks); | 
|  | LPTMR_StartTimer(config->base); | 
|  | } else { | 
|  | LPTMR_SetTimerPeriod(config->base, cfg->ticks); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static uint32_t mcux_lptmr_get_pending_int(const struct device *dev) | 
|  | { | 
|  | const struct mcux_lptmr_config *config = dev->config; | 
|  | uint32_t mask = LPTMR_CSR_TCF_MASK | LPTMR_CSR_TIE_MASK; | 
|  | uint32_t flags; | 
|  |  | 
|  | flags = LPTMR_GetStatusFlags(config->base); | 
|  |  | 
|  | return ((flags & mask) == mask); | 
|  | } | 
|  |  | 
|  | static uint32_t mcux_lptmr_get_top_value(const struct device *dev) | 
|  | { | 
|  | const struct mcux_lptmr_config *config = dev->config; | 
|  |  | 
|  | return (config->base->CMR & LPTMR_CMR_COMPARE_MASK) + 1U; | 
|  | } | 
|  |  | 
|  | static void mcux_lptmr_isr(const struct device *dev) | 
|  | { | 
|  | const struct mcux_lptmr_config *config = dev->config; | 
|  | struct mcux_lptmr_data *data = dev->data; | 
|  | uint32_t flags; | 
|  |  | 
|  | flags = LPTMR_GetStatusFlags(config->base); | 
|  | LPTMR_ClearStatusFlags(config->base, flags); | 
|  |  | 
|  | if (data->top_callback) { | 
|  | data->top_callback(dev, data->top_user_data); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int mcux_lptmr_init(const struct device *dev) | 
|  | { | 
|  | const struct mcux_lptmr_config *config = dev->config; | 
|  | lptmr_config_t lptmr_config; | 
|  |  | 
|  | LPTMR_GetDefaultConfig(&lptmr_config); | 
|  | lptmr_config.timerMode = config->mode; | 
|  | lptmr_config.enableFreeRunning = false; | 
|  | lptmr_config.prescalerClockSource = config->clk_source; | 
|  | lptmr_config.bypassPrescaler = config->bypass_prescaler_glitch; | 
|  | lptmr_config.value = config->prescaler_glitch; | 
|  |  | 
|  | if (config->mode == kLPTMR_TimerModePulseCounter) { | 
|  | lptmr_config.pinSelect = config->pin; | 
|  | lptmr_config.pinPolarity = config->polarity; | 
|  | } | 
|  |  | 
|  | LPTMR_Init(config->base, &lptmr_config); | 
|  |  | 
|  | config->irq_config_func(dev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct counter_driver_api mcux_lptmr_driver_api = { | 
|  | .start = mcux_lptmr_start, | 
|  | .stop = mcux_lptmr_stop, | 
|  | .get_value = mcux_lptmr_get_value, | 
|  | .set_top_value = mcux_lptmr_set_top_value, | 
|  | .get_pending_int = mcux_lptmr_get_pending_int, | 
|  | .get_top_value = mcux_lptmr_get_top_value, | 
|  | }; | 
|  |  | 
|  | #define TO_LPTMR_CLK_SEL(val) _DO_CONCAT(kLPTMR_PrescalerClock_, val) | 
|  | #define TO_LPTMR_PIN_SEL(val) _DO_CONCAT(kLPTMR_PinSelectInput_, val) | 
|  |  | 
|  | /* Prescaler mapping */ | 
|  | #define LPTMR_PRESCALER_2     kLPTMR_Prescale_Glitch_0 | 
|  | #define LPTMR_PRESCALER_4     kLPTMR_Prescale_Glitch_1 | 
|  | #define LPTMR_PRESCALER_8     kLPTMR_Prescale_Glitch_2 | 
|  | #define LPTMR_PRESCALER_16    kLPTMR_Prescale_Glitch_3 | 
|  | #define LPTMR_PRESCALER_32    kLPTMR_Prescale_Glitch_4 | 
|  | #define LPTMR_PRESCALER_64    kLPTMR_Prescale_Glitch_5 | 
|  | #define LPTMR_PRESCALER_128   kLPTMR_Prescale_Glitch_6 | 
|  | #define LPTMR_PRESCALER_256   kLPTMR_Prescale_Glitch_7 | 
|  | #define LPTMR_PRESCALER_512   kLPTMR_Prescale_Glitch_8 | 
|  | #define LPTMR_PRESCALER_1024  kLPTMR_Prescale_Glitch_9 | 
|  | #define LPTMR_PRESCALER_2048  kLPTMR_Prescale_Glitch_10 | 
|  | #define LPTMR_PRESCALER_4096  kLPTMR_Prescale_Glitch_11 | 
|  | #define LPTMR_PRESCALER_8192  kLPTMR_Prescale_Glitch_12 | 
|  | #define LPTMR_PRESCALER_16384 kLPTMR_Prescale_Glitch_13 | 
|  | #define LPTMR_PRESCALER_32768 kLPTMR_Prescale_Glitch_14 | 
|  | #define LPTMR_PRESCALER_65536 kLPTMR_Prescale_Glitch_15 | 
|  | #define TO_LPTMR_PRESCALER(val) _DO_CONCAT(LPTMR_PRESCALER_, val) | 
|  |  | 
|  | /* Glitch filter mapping */ | 
|  | #define LPTMR_GLITCH_2     kLPTMR_Prescale_Glitch_1 | 
|  | #define LPTMR_GLITCH_4     kLPTMR_Prescale_Glitch_2 | 
|  | #define LPTMR_GLITCH_8     kLPTMR_Prescale_Glitch_3 | 
|  | #define LPTMR_GLITCH_16    kLPTMR_Prescale_Glitch_4 | 
|  | #define LPTMR_GLITCH_32    kLPTMR_Prescale_Glitch_5 | 
|  | #define LPTMR_GLITCH_64    kLPTMR_Prescale_Glitch_6 | 
|  | #define LPTMR_GLITCH_128   kLPTMR_Prescale_Glitch_7 | 
|  | #define LPTMR_GLITCH_256   kLPTMR_Prescale_Glitch_8 | 
|  | #define LPTMR_GLITCH_512   kLPTMR_Prescale_Glitch_9 | 
|  | #define LPTMR_GLITCH_1024  kLPTMR_Prescale_Glitch_10 | 
|  | #define LPTMR_GLITCH_2048  kLPTMR_Prescale_Glitch_11 | 
|  | #define LPTMR_GLITCH_4096  kLPTMR_Prescale_Glitch_12 | 
|  | #define LPTMR_GLITCH_8192  kLPTMR_Prescale_Glitch_13 | 
|  | #define LPTMR_GLITCH_16384 kLPTMR_Prescale_Glitch_14 | 
|  | #define LPTMR_GLITCH_32768 kLPTMR_Prescale_Glitch_15 | 
|  | #define TO_LPTMR_GLITCH(val) _DO_CONCAT(LPTMR_GLITCH_, val) | 
|  |  | 
|  | /* | 
|  | * This driver is single-instance. If the devicetree contains multiple | 
|  | * instances, this will fail and the driver needs to be revisited. | 
|  | */ | 
|  | BUILD_ASSERT(DT_NUM_INST_STATUS_OKAY(DT_DRV_COMPAT) <= 1, | 
|  | "unsupported lptmr instance"); | 
|  |  | 
|  | #if DT_NODE_HAS_STATUS(DT_DRV_INST(0), okay) | 
|  | static struct mcux_lptmr_data mcux_lptmr_data_0; | 
|  |  | 
|  | static void mcux_lptmr_irq_config_0(const struct device *dev); | 
|  |  | 
|  | static struct mcux_lptmr_config mcux_lptmr_config_0 = { | 
|  | .info = { | 
|  | .max_top_value = UINT16_MAX, | 
|  | .freq = DT_INST_PROP(0, clock_frequency) / | 
|  | DT_INST_PROP(0, prescaler), | 
|  | .flags = COUNTER_CONFIG_INFO_COUNT_UP, | 
|  | .channels = 0, | 
|  | }, | 
|  | .base = (LPTMR_Type *)DT_INST_REG_ADDR(0), | 
|  | .clk_source = TO_LPTMR_CLK_SEL(DT_INST_PROP(0, clk_source)), | 
|  | #if DT_INST_NODE_HAS_PROP(0, input_pin) | 
|  | #if DT_INST_PROP(0, prescaler) == 1 | 
|  | .bypass_prescaler_glitch = true, | 
|  | #else | 
|  | .prescaler_glitch = TO_LPTMR_GLITCH(DT_INST_PROP(0, prescaler)), | 
|  | #endif | 
|  | .mode = kLPTMR_TimerModePulseCounter, | 
|  | .pin = TO_LPTMR_PIN_SEL(DT_INST_PROP(0, input_pin)), | 
|  | .polarity = DT_INST_PROP(0, active_low), | 
|  | #else /* !DT_INST_NODE_HAS_PROP(0, input_pin) */ | 
|  | .mode = kLPTMR_TimerModeTimeCounter, | 
|  | #if DT_INST_PROP(0, prescaler) == 1 | 
|  | .bypass_prescaler_glitch = true, | 
|  | #else | 
|  | .prescaler_glitch = TO_LPTMR_PRESCALER(DT_INST_PROP(0, prescaler)), | 
|  | #endif | 
|  | #endif /* !DT_INST_NODE_HAS_PROP(0, input_pin) */ | 
|  | .irq_config_func = mcux_lptmr_irq_config_0, | 
|  | }; | 
|  |  | 
|  | DEVICE_DT_INST_DEFINE(0, &mcux_lptmr_init, NULL, | 
|  | &mcux_lptmr_data_0, | 
|  | &mcux_lptmr_config_0, | 
|  | POST_KERNEL, CONFIG_COUNTER_INIT_PRIORITY, | 
|  | &mcux_lptmr_driver_api); | 
|  |  | 
|  | static void mcux_lptmr_irq_config_0(const struct device *dev) | 
|  | { | 
|  | IRQ_CONNECT(DT_INST_IRQN(0), DT_INST_IRQ(0, priority), | 
|  | mcux_lptmr_isr, DEVICE_DT_INST_GET(0), 0); | 
|  | irq_enable(DT_INST_IRQN(0)); | 
|  | } | 
|  | #endif	/* DT_NODE_HAS_STATUS(DT_DRV_INST(0), okay) */ |