dts/arm/st/f7/stm32f767.dtsi

/*
 * Copyright (c) 2019 Roland Ma
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include <st/f7/stm32f7.dtsi>
#include <zephyr/dt-bindings/display/stm32_ltdc.h>

/ {
	/* 128KB DTCM @ 20000000, 368KB SRAM1 @ 20020000,
	 * 16KB SRAM2 @ 2007C000
	 */

	sram0: memory@20020000 {
		compatible = "mmio-sram";
		reg = <0x20020000 DT_SIZE_K(384)>;
	};

	dtcm: memory@20000000 {
		compatible = "zephyr,memory-region", "arm,dtcm";
		reg = <0x20000000 DT_SIZE_K(128)>;
		zephyr,memory-region = "DTCM";
	};

	soc {
		pinctrl: pin-controller@40020000 {
			reg = <0x40020000 0x2C00>;

			gpioj: gpio@40022400 {
				compatible = "st,stm32-gpio";
				gpio-controller;
				#gpio-cells = <2>;
				reg = <0x40022400 0x400>;
				clocks = <&rcc STM32_CLOCK_BUS_AHB1 0x00000200>;
			};

			gpiok: gpio@40022800 {
				compatible = "st,stm32-gpio";
				gpio-controller;
				#gpio-cells = <2>;
				reg = <0x40022800 0x400>;
				clocks = <&rcc STM32_CLOCK_BUS_AHB1 0x00000400>;
			};
		};

		i2c4: i2c@40006000 {
			compatible = "st,stm32-i2c-v2";
			clock-frequency = <I2C_BITRATE_STANDARD>;
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x40006000 0x400>;
			clocks = <&rcc STM32_CLOCK_BUS_APB1 0x01000000>;
			interrupts = <95 0>, <96 0>;
			interrupt-names = "event", "error";
			status = "disabled";
		};

		spi6: spi@40015400 {
			compatible = "st,stm32-spi-fifo", "st,stm32-spi";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x40015400 0x400>;
			clocks = <&rcc STM32_CLOCK_BUS_APB2 0x00200000>;
			interrupts = <86 5>;
			status = "disabled";
		};

		mac: ethernet@40028000 {
			compatible = "st,stm32-ethernet";
			reg = <0x40028000 0x8000>;
			interrupts = <61 0>;
			clock-names = "stmmaceth", "mac-clk-tx",
				      "mac-clk-rx", "mac-clk-ptp";
			clocks = <&rcc STM32_CLOCK_BUS_AHB1 0x02000000>,
				 <&rcc STM32_CLOCK_BUS_AHB1 0x04000000>,
				 <&rcc STM32_CLOCK_BUS_AHB1 0x08000000>,
				 <&rcc STM32_CLOCK_BUS_AHB1 0x10000000>;
			status = "disabled";
		};

		sdmmc2: sdmmc@40011c00 {
			compatible = "st,stm32-sdmmc";
			reg = <0x40011c00 0x400>;
			clocks = <&rcc STM32_CLOCK_BUS_APB2 0x00000080>;
			interrupts = <103 0>;
			status = "disabled";
		};

		ltdc: display-controller@40016800 {
			compatible = "st,stm32-ltdc";
			reg = <0x40016800 0x200>;
			interrupts = <88 0>, <89 0>;
			interrupt-names = "ltdc", "ltdc_err";
			clocks = <&rcc STM32_CLOCK_BUS_APB2 0x04000000>;
			status = "disabled";
		};
	};
};