blob: dd55b8b474016d8b7e7effebb3e9b6f6921f2440 [file] [log] [blame]
# Copyright (c) 2018, NXP
# SPDX-License-Identifier: Apache-2.0
description: NXP FlexSPI controller
compatible: "nxp,imx-flexspi"
include: [spi-controller.yaml, pinctrl-device.yaml]
properties:
reg:
required: true
interrupts:
required: true
ahb-bufferable:
type: boolean
description: |
Enable AHB bufferable write access by setting register field
AHBCR[BUFFERABLEEN].
ahb-cacheable:
type: boolean
description: |
Enable AHB cacheable read access by setting register field
AHBCR[CACHEABLEEN].
ahb-prefetch:
type: boolean
description: |
Enable AHB read prefetch by setting register field AHBCR[PREFETCHEN].
ahb-read-addr-opt:
type: boolean
description: |
Remove burst start address alignment limitation by setting register
field AHBCR[READADDROPT].
combination-mode:
type: boolean
description: |
Combine port A and port B data pins to support octal mode access by
setting register field MCR0[COMBINATIONEN].
sck-differential-clock:
type: boolean
description: |
Enable/disable SCKB pad use as SCKA differential clock output,
when enabled, Port B flash access is not available.
rx-clock-source:
type: int
default: 0
enum:
- 0 # Loopback internally
- 1 # Loopback from DQS pad
- 2 # Loopback from SCK pad
- 3 # External input from DQS pad
description: |
Source clock for flash read. See the RXCLKSRC field in register MCR0.
The default corresponds to the reset value of the register field.
child-binding:
description: NXP FlexSPI port
include: nxp,imx-flexspi-device.yaml