| # GPIO configuration options |
| |
| # Copyright (c) 2015 Intel Corporation |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| menuconfig GPIO |
| bool "General-Purpose Input/Output (GPIO) drivers" |
| help |
| Include GPIO drivers in system config |
| |
| if GPIO |
| |
| module = GPIO |
| module-str = gpio |
| source "subsys/logging/Kconfig.template.log_config" |
| |
| config GPIO_SHELL |
| bool "GPIO Shell" |
| depends on SHELL |
| help |
| Enable GPIO Shell for testing. |
| |
| config GPIO_INIT_PRIORITY |
| int "GPIO init priority" |
| default KERNEL_INIT_PRIORITY_DEFAULT |
| help |
| GPIO driver device initialization priority. |
| |
| config GPIO_GET_DIRECTION |
| bool "Support for querying GPIO direction [EXPERIMENTAL]" |
| select EXPERIMENTAL |
| help |
| Enable this option if the application does not maintain its own GPIO |
| direction state. |
| |
| With this option enabled, the application may query GPIO direction |
| via gpio_port_get_direction(), gpio_pin_is_input(), and |
| gpio_pin_is_output(). |
| |
| config GPIO_GET_CONFIG |
| bool "Support for get configuration function [EXPERIMENTAL]" |
| select EXPERIMENTAL |
| help |
| This option enables the support for getting the current configurations |
| of GPIOs. The driver must implement it to work. |
| |
| config GPIO_HOGS |
| bool "Support for GPIO hogs" |
| default $(dt_gpio_hogs_enabled) |
| help |
| Enable support for GPIO hogs. GPIO hogging is a mechanism for providing |
| automatic GPIO configuration via devicetree. |
| |
| config GPIO_HOGS_INIT_PRIORITY |
| int "GPIO hogs init priority" |
| default 41 |
| depends on GPIO_HOGS |
| help |
| GPIO hogs initialization priority. GPIO hogs must be initialized after the |
| GPIO controller drivers. |
| |
| config GPIO_ENABLE_DISABLE_INTERRUPT |
| bool "Support for enable/disable interrupt without re-config [EXPERIMENTAL]" |
| select EXPERIMENTAL |
| help |
| This option enables the support for enabling/disabling interrupt with |
| previous configuration, and enabling/disabling the interrupt only turns |
| on/off the interrupt signal without changing other registers, such as |
| pending register, etc. The driver must implement it to work. |
| |
| |
| source "drivers/gpio/Kconfig.b91" |
| |
| source "drivers/gpio/Kconfig.dw" |
| |
| source "drivers/gpio/Kconfig.pca95xx" |
| |
| source "drivers/gpio/Kconfig.mcp23s17" |
| |
| source "drivers/gpio/Kconfig.mcp23xxx" |
| |
| source "drivers/gpio/Kconfig.mcux" |
| |
| source "drivers/gpio/Kconfig.mcux_igpio" |
| |
| source "drivers/gpio/Kconfig.mcux_lpc" |
| |
| source "drivers/gpio/Kconfig.mmio32" |
| |
| source "drivers/gpio/Kconfig.stm32" |
| |
| source "drivers/gpio/Kconfig.nrfx" |
| |
| source "drivers/gpio/Kconfig.cmsdk_ahb" |
| |
| source "drivers/gpio/Kconfig.cc13xx_cc26xx" |
| |
| source "drivers/gpio/Kconfig.cc32xx" |
| |
| source "drivers/gpio/Kconfig.sifive" |
| |
| source "drivers/gpio/Kconfig.esp32" |
| |
| source "drivers/gpio/Kconfig.gecko" |
| |
| source "drivers/gpio/Kconfig.sam0" |
| |
| source "drivers/gpio/Kconfig.sam" |
| |
| source "drivers/gpio/Kconfig.sx1509b" |
| |
| source "drivers/gpio/Kconfig.imx" |
| |
| source "drivers/gpio/Kconfig.it8xxx2" |
| |
| source "drivers/gpio/Kconfig.ifx_cat1" |
| |
| source "drivers/gpio/Kconfig.intel" |
| |
| source "drivers/gpio/Kconfig.xec" |
| |
| source "drivers/gpio/Kconfig.stellaris" |
| |
| source "drivers/gpio/Kconfig.rpi_pico" |
| |
| source "drivers/gpio/Kconfig.rv32m1" |
| |
| source "drivers/gpio/Kconfig.lmp90xxx" |
| |
| source "drivers/gpio/Kconfig.ads114s0x" |
| |
| source "drivers/gpio/Kconfig.litex" |
| |
| source "drivers/gpio/Kconfig.lpc11u6x" |
| |
| source "drivers/gpio/Kconfig.xlnx" |
| |
| source "drivers/gpio/Kconfig.npcx" |
| |
| source "drivers/gpio/Kconfig.emul" |
| |
| source "drivers/gpio/Kconfig.emul_sdl" |
| |
| source "drivers/gpio/Kconfig.psoc6" |
| |
| source "drivers/gpio/Kconfig.pcal64xxa" |
| |
| source "drivers/gpio/Kconfig.eos_s3" |
| |
| source "drivers/gpio/Kconfig.rcar" |
| |
| source "drivers/gpio/Kconfig.cy8c95xx" |
| |
| source "drivers/gpio/Kconfig.creg_gpio" |
| |
| source "drivers/gpio/Kconfig.stmpe1600" |
| |
| source "drivers/gpio/Kconfig.pca953x" |
| |
| source "drivers/gpio/Kconfig.pcf8574" |
| |
| source "drivers/gpio/Kconfig.fxl6408" |
| |
| source "drivers/gpio/Kconfig.andes_atcgpio100" |
| |
| source "drivers/gpio/Kconfig.neorv32" |
| |
| source "drivers/gpio/Kconfig.nct38xx" |
| |
| source "drivers/gpio/Kconfig.test" |
| |
| source "drivers/gpio/Kconfig.gd32" |
| |
| source "drivers/gpio/Kconfig.xlnx_ps" |
| |
| source "drivers/gpio/Kconfig.sn74hc595" |
| |
| source "drivers/gpio/Kconfig.mchp_mss" |
| |
| source "drivers/gpio/Kconfig.xmc4xxx" |
| |
| source "drivers/gpio/Kconfig.smartbond" |
| |
| source "drivers/gpio/Kconfig.nxp_s32" |
| |
| source "drivers/gpio/Kconfig.tca6424a" |
| |
| source "drivers/gpio/Kconfig.npm1300" |
| |
| source "drivers/gpio/Kconfig.npm6001" |
| |
| source "drivers/gpio/Kconfig.rt1718s" |
| |
| source "drivers/gpio/Kconfig.numicro" |
| |
| source "drivers/gpio/Kconfig.bd8lb600fs" |
| |
| source "drivers/gpio/Kconfig.sc18im704" |
| |
| endif # GPIO |