| description: EOS S3 GPIO node |
| |
| compatible: "quicklogic,eos-s3-gpio" |
| |
| include: [gpio-controller.yaml, base.yaml] |
| |
| properties: |
| label: |
| required: true |
| |
| interrupts: |
| required: true |
| |
| "#gpio-cells": |
| const: 2 |
| |
| pin-secondary-config: |
| type: int |
| required: true |
| description: | |
| This property is used to preconfigure the GPIOs and connect them to |
| a primary(0) or a secondary(1) pin. EOS S3 supports up to 8 GPIOs |
| which can be configured as follows |
| "GPIO_NUM : primary_pin_num / secondary_pin_num" |
| "0 : 6 / 24" |
| "1 : 9 / 26" |
| "2 : 11 / 28" |
| "3 : 14 / 30" |
| "4 : 18 / 31" |
| "5 : 21 / 36" |
| "6 : 22 / 38" |
| "7 : 23 / 45" |
| E.g. configuring GPIO 2 as secondary results in controlling pin 28, |
| to do so set the bit on the 2nd index of this property |
| "pin-secondary-config = <0x04>;" |
| |
| gpio-cells: |
| - pin |
| - flags |
