blob: b9dd3be54ef4c8f1dc74ffde4d9295a971d72f57 [file] [log] [blame]
# Copyright (c) 2020, STMicroelectronics
# SPDX-License-Identifier: Apache-2.0
description: STM32 timers
compatible: "st,stm32-timers"
include: base.yaml
properties:
label:
required: true
reg:
required: true
clocks:
required: true
interrupts:
required: false
st,prescaler:
type: int
required: true
description: |
Clock prescaler at the input of the timer
Could be in range [0 .. 0xFFFF] for STM32 General Purpose Timers (CLK/(prescaler+1) )
st,countermode:
type: int
required: false
default: 0 # STM32_TIM_COUNTERMODE_UP - reset state
description: |
Sets timer counter mode.
Use constants defined in dt-bindings/timer/stm32-timer.h.
* STM32_TIM_COUNTERMODE_UP - used as upcounter.
* STM32_TIM_COUNTERMODE_DOWN - used as downcounter.
* STM32_TIM_COUNTERMODE_CENTER_DOWN - counts up and down alternatively.
Output compare interrupt flags of output channels
are set only when the counter is counting down.
* STM32_TIM_COUNTERMODE_CENTER_UP - counts up and down alternatively.
Output compare interrupt flags of output channels
are set only when the counter is counting up.
* STM32_TIM_COUNTERMODE_CENTER_UP_DOWN - counts up and down alternatively.
Output compare interrupt flags of output channels
are set only when the counter is counting up or down.
If absent, then STM32_TIM_COUNTERMODE_UP is used (reset state).