| /* |
| * Copyright (c) 2018 Nordic Semiconductor ASA |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| / { |
| model = "Nordic PCA10090 Dev Kit"; |
| compatible = "nordic,pca10090-dk", "nordic,nrf9160-sica", |
| "nordic,nrf9160"; |
| |
| chosen { |
| zephyr,console = &uart0; |
| zephyr,shell-uart = &uart0; |
| zephyr,uart-mcumgr = &uart0; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| led0: led_0 { |
| gpios = <&gpio0 2 GPIO_INT_ACTIVE_HIGH>; |
| label = "Green LED 0"; |
| }; |
| led1: led_1 { |
| gpios = <&gpio0 3 GPIO_INT_ACTIVE_HIGH>; |
| label = "Green LED 1"; |
| }; |
| led2: led_2 { |
| gpios = <&gpio0 4 GPIO_INT_ACTIVE_HIGH>; |
| label = "Green LED 2"; |
| }; |
| led3: led_3 { |
| gpios = <&gpio0 5 GPIO_INT_ACTIVE_HIGH>; |
| label = "Green LED 3"; |
| }; |
| }; |
| |
| buttons { |
| compatible = "gpio-keys"; |
| button0: button_0 { |
| gpios = <&gpio0 8 GPIO_PUD_PULL_UP>; |
| label = "Switch 1"; |
| }; |
| button1: button_1 { |
| gpios = <&gpio0 9 GPIO_PUD_PULL_UP>; |
| label = "Switch 2"; |
| }; |
| button2: button_2 { |
| gpios = <&gpio0 6 GPIO_PUD_PULL_UP>; |
| label = "Push button 1"; |
| }; |
| button3: button_3 { |
| gpios = <&gpio0 7 GPIO_PUD_PULL_UP>; |
| label = "Push button 2"; |
| }; |
| }; |
| |
| /* These aliases are provided for compatibility with samples */ |
| aliases { |
| led0 = &led0; |
| led1 = &led1; |
| led2 = &led2; |
| led3 = &led3; |
| sw0 = &button2; |
| sw1 = &button3; |
| sw2 = &button0; |
| sw3 = &button1; |
| }; |
| }; |
| |
| &adc { |
| status ="ok"; |
| }; |
| |
| &gpiote { |
| status = "ok"; |
| }; |
| |
| &gpio0 { |
| status = "ok"; |
| }; |
| |
| &uart0 { |
| status = "ok"; |
| current-speed = <115200>; |
| tx-pin = <29>; |
| rx-pin = <28>; |
| rts-pin = <27>; |
| cts-pin = <26>; |
| }; |
| |
| &uart1 { |
| status = "ok"; |
| current-speed = <115200>; |
| tx-pin = <1>; |
| rx-pin = <0>; |
| rts-pin = <14>; |
| cts-pin = <15>; |
| }; |
| |
| &i2c2 { |
| status = "ok"; |
| sda-pin = <30>; |
| scl-pin = <31>; |
| }; |
| |
| &pwm0 { |
| status = "ok"; |
| ch0-pin = <2>; |
| }; |
| |
| &spi3 { |
| status = "ok"; |
| sck-pin = <19>; |
| mosi-pin = <18>; |
| miso-pin = <17>; |
| }; |
| |
| &timer0 { |
| status = "ok"; |
| }; |
| |
| &timer1 { |
| status = "ok"; |
| }; |
| |
| &timer2 { |
| status = "ok"; |
| }; |
| |
| &flash0 { |
| /* |
| * For more information, see: |
| * http://docs.zephyrproject.org/latest/guides/dts/index.html#flash-partitions |
| */ |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| boot_partition: partition@0 { |
| label = "mcuboot"; |
| reg = <0x00000000 0x10000>; |
| }; |
| slot0_partition: partition@10000 { |
| label = "image-0"; |
| }; |
| slot0_ns_partition: partition@40000 { |
| label = "image-0-nonsecure"; |
| }; |
| slot1_partition: partition@80000 { |
| label = "image-1"; |
| }; |
| slot1_ns_partition: partition@b0000 { |
| label = "image-1-nonsecure"; |
| }; |
| scratch_partition: partition@f0000 { |
| label = "image-scratch"; |
| reg = <0x000f0000 0xa000>; |
| }; |
| storage_partition: partition@fa000 { |
| label = "storage"; |
| reg = <0x000fa000 0x00006000>; |
| }; |
| }; |
| }; |
| |
| / { |
| /* SRAM allocated and used by the BSD library */ |
| sram0_bsd: memory@20010000 { |
| device_type = "memory"; |
| compatible = "mmio-sram"; |
| }; |
| |
| /* SRAM allocated to the Non-Secure image */ |
| sram0_ns: memory@20020000 { |
| device_type = "memory"; |
| compatible = "mmio-sram"; |
| }; |
| }; |
| |
| /* Include partition configuration file */ |
| #include "nrf9160_pca10090_partition_conf.dts" |