| # Kconfig - OpenThread driver configuration options |
| # |
| # |
| # Copyright (c) 2018 Nordic Semiconductor ASA |
| # |
| # SPDX-License-Identifier: Apache-2.0 |
| # |
| |
| # |
| # OpenThread options |
| # |
| menuconfig NET_L2_OPENTHREAD |
| bool "OpenThread L2" |
| depends on FLASH |
| depends on FLASH_PAGE_LAYOUT |
| depends on CPLUSPLUS |
| depends on REBOOT |
| select OPENTHREAD_PLAT |
| |
| if NET_L2_OPENTHREAD |
| |
| config OPENTHREAD_PLAT |
| bool |
| help |
| This option enables OpenThread platform |
| |
| if OPENTHREAD_PLAT |
| |
| menuconfig OPENTHREAD_DEBUG |
| bool "OpenThread stack log support" |
| help |
| This option enables log support for OpenThread |
| |
| if OPENTHREAD_DEBUG |
| |
| choice |
| prompt "OpenThread stack log level" |
| help |
| This option selects log level for OpenThread stack. |
| |
| config OPENTHREAD_LOG_LEVEL_ERROR |
| bool "Error" |
| config OPENTHREAD_LOG_LEVEL_WARNING |
| bool "Warning" |
| config OPENTHREAD_LOG_LEVEL_INFO |
| bool "Info" |
| config OPENTHREAD_LOG_LEVEL_DEBUG |
| bool "Debug" |
| endchoice |
| |
| endif |
| |
| endif |
| |
| config OPENTHREAD_LOG_LEVEL |
| int |
| default 1 if OPENTHREAD_LOG_LEVEL_ERROR |
| default 2 if OPENTHREAD_LOG_LEVEL_WARNING |
| default 3 if OPENTHREAD_LOG_LEVEL_INFO |
| default 4 if OPENTHREAD_LOG_LEVEL_DEBUG |
| default 0 |
| |
| menuconfig OPENTHREAD_L2_DEBUG |
| bool "OpenThread L2 log support" |
| help |
| This option enables log support for OpenThread |
| |
| if OPENTHREAD_L2_DEBUG |
| config OPENTHREAD_L2_DEBUG_DUMP_15_4 |
| bool "Dump 802.15.4 packets" |
| help |
| This option enables dumping of 802.15.4 packets |
| |
| config OPENTHREAD_L2_DEBUG_DUMP_IPV6 |
| bool "Dump IPv6 packets" |
| help |
| This option enables dumping of IPv6 packets |
| |
| endif |
| |
| module = OPENTHREAD_L2 |
| module-dep = NET_LOG |
| module-str = Log level for OpenThread driver |
| module-help = Enables OpenThread driver to output debug messages. |
| source "subsys/net/Kconfig.template.log_config.net" |
| |
| config OPENTHREAD_THREAD_PRIORITY |
| int "OpenThread thread priority" |
| default 8 |
| |
| config OPENTHREAD_THREAD_STACK_SIZE |
| int "OpenThread thread stack size" |
| default 6144 if OPENTHREAD_COMMISSIONER |
| default 3072 |
| |
| config OPENTHREAD_PKT_LIST_SIZE |
| int "List size for Ip6 packet buffering" |
| default 10 |
| |
| config OPENTHREAD_PANID |
| int "Default PAN ID" |
| default 43981 |
| |
| config OPENTHREAD_CHANNEL |
| int "Default Channel" |
| default 11 |
| |
| config OPENTHREAD_NETWORK_NAME |
| string "Default network name" |
| default "ot_zephyr" |
| help |
| Network name for OpenThread |
| |
| config OPENTHREAD_XPANID |
| string "Default Extended PAN ID" |
| default "de:ad:00:be:ef:00:ca:fe" |
| help |
| Extended PAN ID for OpenThread with |
| format "de:ad:00:be:ef:00:ca:fe" |
| |
| choice |
| prompt "OpenThread device type" |
| help |
| This option selects Thread network device type |
| |
| config OPENTHREAD_FTD |
| bool "FTD - Full Thread Device" |
| config OPENTHREAD_MTD |
| bool "MTD - Minimal Thread Device" |
| endchoice |
| |
| config OPENTHREAD_SHELL |
| bool "Enable OpenThread shell" |
| select SHELL |
| default y |
| |
| config OPENTHREAD_DIAG |
| bool "Diagnostic functions support" |
| help |
| Enable OpenThread CLI diagnostic commands |
| |
| config OPENTHREAD_COMMISSIONER |
| bool "Commissioner functions support" |
| help |
| Enable commissioner capability in OpenThread stack |
| |
| config OPENTHREAD_JOINER |
| bool "Joiner functions support" |
| help |
| Enable joiner capability in OpenThread stack |
| |
| config OPENTHREAD_JOINER_AUTOSTART |
| bool "Support for automatic joiner start" |
| depends on OPENTHREAD_JOINER |
| help |
| Enable automatic joiner start |
| |
| config OPENTHREAD_JOINER_PSKD |
| string "Default Pre Shared key for the Device to start joiner" |
| depends on OPENTHREAD_JOINER_AUTOSTART |
| default "J01NME" |
| help |
| Pre Shared Key for the Device to start joiner |
| |
| config OPENTHREAD_PLATFORM_INFO |
| string "Platform information for OpenThread" |
| default "ZEPHYR" |
| help |
| Platform information for OpenThread |
| |
| config OPENTHREAD_JAM_DETECTION |
| bool "Jam detection support" |
| help |
| Enable jam detection in OpenThread stack |
| |
| config OT_PLAT_FLASH_PAGES_COUNT |
| int "Flash pages count used by OpenThread platform" |
| default 4 |
| help |
| This option sets flash pages count used by OpenThread to store its settings. They are located at the end of flash. |
| |
| endif |
