| /* |
| * Copyright (c) 2021 Synopsys. |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| #ifndef ZEPHYR_ARCH_ARC_CORE_MPU_ARC_MPU_COMMON_INTERNAL_H_ |
| #define ZEPHYR_ARCH_ARC_CORE_MPU_ARC_MPU_COMMON_INTERNAL_H_ |
| |
| #if CONFIG_ARC_MPU_VER == 2 || CONFIG_ARC_MPU_VER == 3 |
| #include "arc_mpu_v2_internal.h" |
| #elif CONFIG_ARC_MPU_VER == 6 |
| #include "arc_mpu_v6_internal.h" |
| #else |
| #error "Unsupported MPU version" |
| #endif |
| |
| /** |
| * @brief configure the base address and size for an MPU region |
| * |
| * @param type MPU region type |
| * @param base base address in RAM |
| * @param size size of the region |
| */ |
| static inline int _mpu_configure(uint8_t type, uint32_t base, uint32_t size) |
| { |
| int32_t region_index = get_region_index_by_type(type); |
| uint32_t region_attr = get_region_attr_by_type(type); |
| |
| LOG_DBG("Region info: 0x%x 0x%x", base, size); |
| |
| if (region_attr == 0U || region_index < 0) { |
| return -EINVAL; |
| } |
| |
| /* |
| * For ARC MPU, MPU regions can be overlapped, smaller |
| * region index has higher priority. |
| */ |
| _region_init(region_index, base, size, region_attr); |
| |
| return 0; |
| } |
| |
| /* ARC Core MPU Driver API Implementation for ARC MP */ |
| |
| /** |
| * @brief enable the MPU |
| */ |
| void arc_core_mpu_enable(void) |
| { |
| /* Enable MPU */ |
| z_arc_v2_aux_reg_write(_ARC_V2_MPU_EN, |
| z_arc_v2_aux_reg_read(_ARC_V2_MPU_EN) | AUX_MPU_EN_ENABLE); |
| } |
| |
| /** |
| * @brief disable the MPU |
| */ |
| void arc_core_mpu_disable(void) |
| { |
| /* Disable MPU */ |
| z_arc_v2_aux_reg_write(_ARC_V2_MPU_EN, |
| z_arc_v2_aux_reg_read(_ARC_V2_MPU_EN) & AUX_MPU_EN_DISABLE); |
| } |
| |
| /** |
| * @brief configure the thread's MPU regions |
| * |
| * @param thread the target thread |
| */ |
| void arc_core_mpu_configure_thread(struct k_thread *thread) |
| { |
| #if defined(CONFIG_USERSPACE) |
| /* configure stack region of user thread */ |
| if (thread->base.user_options & K_USER) { |
| LOG_DBG("configure user thread %p's stack", thread); |
| if (_mpu_configure(THREAD_STACK_USER_REGION, |
| (uint32_t)thread->stack_info.start, |
| thread->stack_info.size) < 0) { |
| LOG_ERR("user thread %p's stack failed", thread); |
| return; |
| } |
| } |
| |
| LOG_DBG("configure thread %p's domain", thread); |
| arc_core_mpu_configure_mem_domain(thread); |
| #endif |
| } |
| |
| |
| /** |
| * @brief configure the default region |
| * |
| * @param region_attr region attribute of default region |
| */ |
| void arc_core_mpu_default(uint32_t region_attr) |
| { |
| uint32_t val = z_arc_v2_aux_reg_read(_ARC_V2_MPU_EN) & (~AUX_MPU_RDP_ATTR_MASK); |
| |
| region_attr &= AUX_MPU_RDP_ATTR_MASK; |
| z_arc_v2_aux_reg_write(_ARC_V2_MPU_EN, region_attr | val); |
| } |
| |
| /** |
| * @brief configure the MPU region |
| * |
| * @param index MPU region index |
| * @param base base address |
| * @param region_attr region attribute |
| */ |
| int arc_core_mpu_region(uint32_t index, uint32_t base, uint32_t size, uint32_t region_attr) |
| { |
| if (index >= get_num_regions()) { |
| return -EINVAL; |
| } |
| |
| region_attr &= AUX_MPU_RDP_ATTR_MASK; |
| |
| _region_init(index, base, size, region_attr); |
| |
| return 0; |
| } |
| |
| #if defined(CONFIG_USERSPACE) |
| |
| /** |
| * @brief configure MPU regions for the memory partitions of the memory domain |
| * |
| * @param thread the thread which has memory domain |
| */ |
| void arc_core_mpu_configure_mem_domain(struct k_thread *thread) |
| { |
| int region_index = get_region_index_by_type(THREAD_DOMAIN_PARTITION_REGION); |
| uint32_t num_partitions; |
| struct k_mem_partition *pparts; |
| struct k_mem_domain *mem_domain = NULL; |
| |
| if (thread) { |
| mem_domain = thread->mem_domain_info.mem_domain; |
| } |
| |
| if (mem_domain) { |
| LOG_DBG("configure domain: %p", mem_domain); |
| num_partitions = mem_domain->num_partitions; |
| pparts = mem_domain->partitions; |
| } else { |
| LOG_DBG("disable domain partition regions"); |
| num_partitions = 0U; |
| pparts = NULL; |
| } |
| |
| for (; region_index >= 0; region_index--) { |
| if (num_partitions) { |
| LOG_DBG("set region 0x%x 0x%lx 0x%x", |
| region_index, pparts->start, pparts->size); |
| _region_init(region_index, pparts->start, pparts->size, pparts->attr); |
| num_partitions--; |
| } else { |
| /* clear the left mpu entries */ |
| _region_init(region_index, 0, 0, 0); |
| } |
| pparts++; |
| } |
| } |
| |
| /** |
| * @brief remove MPU regions for the memory partitions of the memory domain |
| * |
| * @param mem_domain the target memory domain |
| */ |
| void arc_core_mpu_remove_mem_domain(struct k_mem_domain *mem_domain) |
| { |
| ARG_UNUSED(mem_domain); |
| |
| int region_index = get_region_index_by_type(THREAD_DOMAIN_PARTITION_REGION); |
| |
| for (; region_index >= 0; region_index--) { |
| _region_init(region_index, 0, 0, 0); |
| } |
| } |
| |
| /** |
| * @brief reset MPU region for a single memory partition |
| * |
| * @param domain the target memory domain |
| * @param partition_id memory partition id |
| */ |
| void arc_core_mpu_remove_mem_partition(struct k_mem_domain *domain, uint32_t part_id) |
| { |
| ARG_UNUSED(domain); |
| |
| int region_index = get_region_index_by_type(THREAD_DOMAIN_PARTITION_REGION); |
| |
| LOG_DBG("disable region 0x%x", region_index + part_id); |
| /* Disable region */ |
| _region_init(region_index + part_id, 0, 0, 0); |
| } |
| |
| /** |
| * @brief get the maximum number of free regions for memory domain partitions |
| */ |
| int arc_core_mpu_get_max_domain_partition_regions(void) |
| { |
| return get_region_index_by_type(THREAD_DOMAIN_PARTITION_REGION) + 1; |
| } |
| |
| /** |
| * @brief validate the given buffer is user accessible or not |
| */ |
| int arc_core_mpu_buffer_validate(void *addr, size_t size, int write) |
| { |
| /* |
| * For ARC MPU, smaller region number takes priority. |
| * we can stop the iteration immediately once we find the |
| * matched region that grants permission or denies access. |
| * |
| */ |
| for (int r_index = 0; r_index < get_num_regions(); r_index++) { |
| if (!_is_enabled_region(r_index) || !_is_in_region(r_index, (uint32_t)addr, size)) { |
| continue; |
| } |
| |
| if (_is_user_accessible_region(r_index, write)) { |
| return 0; |
| } else { |
| return -EPERM; |
| } |
| } |
| |
| return -EPERM; |
| } |
| #endif /* CONFIG_USERSPACE */ |
| |
| /* ARC MPU Driver Initial Setup */ |
| /* |
| * @brief MPU default initialization and configuration |
| * |
| * This function provides the default configuration mechanism for the Memory |
| * Protection Unit (MPU). |
| */ |
| static int arc_mpu_init(void) |
| { |
| |
| uint32_t num_regions = get_num_regions(); |
| |
| if (mpu_config.num_regions > num_regions) { |
| __ASSERT(0, "Request to configure: %u regions (supported: %u)\n", |
| mpu_config.num_regions, num_regions); |
| return -EINVAL; |
| } |
| |
| /* Disable MPU */ |
| arc_core_mpu_disable(); |
| |
| /* |
| * the MPU regions are filled in the reverse order. |
| * According to ARCv2 ISA, the MPU region with smaller |
| * index has higher priority. The static background MPU |
| * regions in mpu_config will be in the bottom. Then |
| * the special type regions will be above. |
| */ |
| int r_index = num_regions - mpu_config.num_regions; |
| |
| /* clear all the regions first */ |
| for (uint32_t i = 0U; i < r_index; i++) { |
| _region_init(i, 0, 0, 0); |
| } |
| |
| /* configure the static regions */ |
| for (uint32_t i = 0U; i < mpu_config.num_regions; i++) { |
| _region_init(r_index, mpu_config.mpu_regions[i].base, |
| mpu_config.mpu_regions[i].size, mpu_config.mpu_regions[i].attr); |
| r_index++; |
| } |
| |
| /* default region: no read, write and execute */ |
| arc_core_mpu_default(0); |
| |
| /* Enable MPU */ |
| arc_core_mpu_enable(); |
| |
| return 0; |
| } |
| |
| SYS_INIT(arc_mpu_init, PRE_KERNEL_1, CONFIG_KERNEL_INIT_PRIORITY_DEFAULT); |
| |
| #endif /* ZEPHYR_ARCH_ARC_CORE_MPU_ARC_MPU_COMMON_INTERNAL_H_ */ |