| # Copyright (C) 2020 Linaro |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| description: | |
| GPIO pins exposed on Mikro BUS headers. |
| |
| The Mikro BUS layout provides two headers, aligned on the opposite |
| edges of the board. |
| |
| Documentation: |
| https://www.mikroe.com/mikrobus |
| https://download.mikroe.com/documents/standards/mikrobus/mikrobus-standard-specification-v200.pdf |
| |
| This binding provides a nexus mapping for 10 pins, left side pins are |
| numbered 0 - 5 (AN - MOSI), the right side pins are numbered 6 - 10 |
| (PWM - SDA). The bottom 2 pins on each side are used for input voltage |
| and ground, they are not mapped in the nexus. |
| |
| Analog - AN PWM - PWM output |
| Reset - RST INT - Hardware Interrupt |
| SPI Chip Select - CS RX - UART Receive |
| SPI Clock - SCK TX - UART Transmit |
| SPI Master Input Slave Output - MISO SCL - I2C Clock |
| SPI Master Output Slave Input - MOSI SDA - I2C Data |
| VCC-3.3V power - +3.3V +5V - VCC-5V power |
| Reference Ground - GND GND - Reference Ground |
| |
| Board's silkscreen may vary depending you board, but coherent with |
| the description above as it's according to the standard's specification. |
| |
| compatible: "mikro-bus" |
| |
| include: [gpio-nexus.yaml, base.yaml] |
