| /* |
| * Copyright (c) 2022 Renesas Electronics Corporation and/or its affiliates |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| /dts-v1/; |
| #include <renesas/smartbond/da14699.dtsi> |
| #include "da1469x_dk_pro-pinctrl.dtsi" |
| |
| / { |
| model = "DA1469x series Development Kit Pro"; |
| compatible = "renesas,da1469x_dk_pro"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| chosen { |
| zephyr,sram = &sram0; |
| zephyr,flash = &flash0; |
| zephyr,console = &uart; |
| zephyr,shell-uart = &uart; |
| zephyr,code-partition = &slot0_partition; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| red_led: led_0 { |
| gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| |
| arduino_header: connector { |
| compatible = "arduino-header-r3"; |
| #gpio-cells = <2>; |
| gpio-map-mask = <0xffffffff 0xffffffc0>; |
| gpio-map-pass-thru = <0 0x3f>; |
| gpio-map = |
| <0 0 &gpio1 9 0>, /* A0 */ |
| <1 0 &gpio0 25 0>, /* A1 */ |
| <2 0 &gpio0 8 0>, /* A2 */ |
| <3 0 &gpio0 9 0>, /* A3 */ |
| <4 0 &gpio1 13 0>, /* A4 */ |
| <5 0 &gpio1 12 0>, /* A5 */ |
| <6 0 &gpio1 2 0>, /* D0 */ |
| <7 0 &gpio1 3 0>, /* D1 */ |
| <8 0 &gpio1 4 0>, /* D2 */ |
| <9 0 &gpio1 5 0>, /* D3 */ |
| <10 0 &gpio1 7 0>, /* D4 */ |
| <11 0 &gpio1 8 0>, /* D5 */ |
| <12 0 &gpio0 17 0>, /* D6 */ |
| <13 0 &gpio0 18 0>, /* D7 */ |
| <14 0 &gpio0 19 0>, /* D8 */ |
| <15 0 &gpio0 20 0>, /* D9 */ |
| <16 0 &gpio0 21 0>, /* D10 */ |
| <17 0 &gpio0 24 0>, /* D11 */ |
| <18 0 &gpio0 26 0>, /* D12 */ |
| <19 0 &gpio0 27 0>, /* D13 */ |
| <20 0 &gpio0 28 0>, /* D14 */ |
| <21 0 &gpio0 29 0>; /* D15 */ |
| }; |
| |
| aliases { |
| led0 = &red_led; |
| watchdog0 = &wdog; |
| }; |
| |
| sysclk: system-clock { |
| compatible = "fixed-clock"; |
| clock-frequency = <32000000>; |
| #clock-cells = <0>; |
| }; |
| }; |
| |
| &flash0 { |
| reg = <0x16000000 DT_SIZE_M(1)>; |
| |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| /* |
| * Flash area from 0x0000 to 0x2400 is reserved |
| * for product header added by flasher. |
| */ |
| |
| boot_partition: partition@2400 { |
| label = "mcuboot"; |
| reg = <0x000002400 0x00009c00>; |
| }; |
| slot0_partition: partition@c000 { |
| label = "image-0"; |
| reg = <0x0000c000 0x00076000>; |
| }; |
| slot1_partition: partition@80000 { |
| label = "image-1"; |
| reg = <0x00082000 0x00076000>; |
| }; |
| storage_partition: partition@f8000 { |
| label = "storage"; |
| reg = <0x000f8000 0x00008000>; |
| }; |
| }; |
| }; |
| |
| &gpio0 { |
| status = "okay"; |
| }; |
| |
| &gpio1 { |
| status = "okay"; |
| }; |
| |
| &uart { |
| current-speed = <115200>; |
| status = "okay"; |
| pinctrl-0 = <&uart_default>; |
| pinctrl-names = "default"; |
| }; |
| |
| zephyr_udc0: &usbd { |
| compatible = "renesas,smartbond-usbd"; |
| status = "okay"; |
| }; |
| |
| &rc32m { |
| status = "disabled"; |
| }; |
| |
| &xtal32m { |
| status = "okay"; |
| }; |
| |
| &xtal32k { |
| status = "okay"; |
| }; |
| |
| &lp_clk { |
| clock-src = <&xtal32k>; |
| }; |
| |
| &sys_clk { |
| clock-src = <&xtal32m>; |
| }; |
| |
| &pll { |
| status = "okay"; |
| }; |
| &i2c { |
| status = "okay"; |
| pinctrl-0 = <&i2c_default>; |
| pinctrl-names = "default"; |
| }; |
| |
| &i2c2 { |
| status = "okay"; |
| pinctrl-0 = <&i2c2_default>; |
| pinctrl-names = "default"; |
| }; |
| |
| &spi { |
| status = "okay"; |
| pinctrl-0 = <&spi_controller>; |
| pinctrl-names = "default"; |
| }; |
| |
| &spi2 { |
| status = "okay"; |
| pinctrl-0 = <&spi2_controller>; |
| pinctrl-names = "default"; |
| }; |