Google Git
Sign in
pigweed / third_party / github / zephyrproject-rtos / zephyr / 492eeeac3109665addb1ec6b62e1d4192f3eacb9 / . / drivers / can / can_tcan4x5x.c
blob: 8d8a1a612ad319a7fea17c35e8a9d105a3eafb3b [file] [log] [blame]
/*
* Copyright (c) 2023 Vestas Wind Systems A/S
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <zephyr/device.h>
#include <zephyr/drivers/can.h>
#include <zephyr/drivers/can/can_mcan.h>
#include <zephyr/drivers/gpio.h>
#include <zephyr/drivers/spi.h>
#include <zephyr/logging/log.h>
#include <zephyr/sys/byteorder.h>
#include <zephyr/sys/util.h>
LOG_MODULE_REGISTER(can_tcan4x5x, CONFIG_CAN_LOG_LEVEL);
#define DT_DRV_COMPAT ti_tcan4x5x
/*
* The register definitions correspond to those found in the TI TCAN4550-Q1 datasheet, revision D
* June 2022 (SLLSEZ5D).
*/
/* Device ID1 register */
#define CAN_TCAN4X5X_DEVICE_ID1 0x0000
/* Device ID2 register */
#define CAN_TCAN4X5X_DEVICE_ID2 0x0004
/* Revision register */
#define CAN_TCAN4X5X_REVISION 0x0008
#define CAN_TCAN4X5X_REVISION_SPI_2_REVISION GENMASK(31, 24)
#define CAN_TCAN4X5X_REVISION_REV_ID_MAJOR GENMASK(15, 8)
#define CAN_TCAN4X5X_REVISION_REV_ID_MINOR GENMASK(7, 0)
/* Status register */
#define CAN_TCAN4X5X_STATUS 0x000c
#define CAN_TCAN4X5X_STATUS_INTERNAL_READ_ERROR BIT(29)
#define CAN_TCAN4X5X_STATUS_INTERNAL_WRITE_ERROR BIT(28)
#define CAN_TCAN4X5X_STATUS_INTERNAL_ERROR_LOG_WRITE BIT(27)
#define CAN_TCAN4X5X_STATUS_READ_FIFO_UNDERFLOW BIT(26)
#define CAN_TCAN4X5X_STATUS_READ_FIFO_EMPTY BIT(25)
#define CAN_TCAN4X5X_STATUS_WRITE_FIFO_OVERFLOW BIT(24)
#define CAN_TCAN4X5X_STATUS_SPI_END_ERROR BIT(21)
#define CAN_TCAN4X5X_STATUS_INVALID_COMMAND BIT(20)
#define CAN_TCAN4X5X_STATUS_WRITE_OVERFLOW BIT(19)
#define CAN_TCAN4X5X_STATUS_WRITE_UNDERFLOW BIT(18)
#define CAN_TCAN4X5X_STATUS_READ_OVERFLOW BIT(17)
#define CAN_TCAN4X5X_STATUS_READ_UNDERFLOW BIT(16)
#define CAN_TCAN4X5X_STATUS_WRITE_FIFO_AVAILABLE BIT(5)
#define CAN_TCAN4X5X_STATUS_READ_FIFO_AVAILABLE BIT(4)
#define CAN_TCAN4X5X_STATUS_INTERNAL_ACCESS_ACTIVE BIT(3)
#define CAN_TCAN4X5X_STATUS_INTERNAL_ERROR_INTERRUPT BIT(2)
#define CAN_TCAN4X5X_STATUS_SPI_ERROR_INTERRUPT BIT(1)
#define CAN_TCAN4X5X_STATUS_INTERRUPT BIT(0)
/* Mask of clearable status register bits */
#define CAN_TCAN4X5X_STATUS_CLEAR_ALL \
(CAN_TCAN4X5X_STATUS_INTERNAL_READ_ERROR | CAN_TCAN4X5X_STATUS_INTERNAL_WRITE_ERROR | \
CAN_TCAN4X5X_STATUS_INTERNAL_ERROR_LOG_WRITE | CAN_TCAN4X5X_STATUS_READ_FIFO_UNDERFLOW | \
CAN_TCAN4X5X_STATUS_READ_FIFO_EMPTY | CAN_TCAN4X5X_STATUS_WRITE_FIFO_OVERFLOW | \
CAN_TCAN4X5X_STATUS_SPI_END_ERROR | CAN_TCAN4X5X_STATUS_INVALID_COMMAND | \
CAN_TCAN4X5X_STATUS_WRITE_OVERFLOW | CAN_TCAN4X5X_STATUS_WRITE_UNDERFLOW | \
CAN_TCAN4X5X_STATUS_READ_OVERFLOW | CAN_TCAN4X5X_STATUS_READ_UNDERFLOW)
/* SPI Error Status Mask register */
#define CAN_TCAN4X5X_SPI_ERROR_STATUS_MASK 0x0010
#define CAN_TCAN4X5X_SPI_ERROR_STATUS_MASK_INTERNAL_READ_ERROR BIT(29)
#define CAN_TCAN4X5X_SPI_ERROR_STATUS_MASK_INTERNAL_WRITE_ERROR BIT(28)
#define CAN_TCAN4X5X_SPI_ERROR_STATUS_MASK_INTERNAL_ERROR_LOG_WRITE BIT(27)
#define CAN_TCAN4X5X_SPI_ERROR_STATUS_MASK_READ_FIFO_UNDERFLOW BIT(26)
#define CAN_TCAN4X5X_SPI_ERROR_STATUS_MASK_READ_FIFO_EMPTY BIT(25)
#define CAN_TCAN4X5X_SPI_ERROR_STATUS_MASK_WRITE_FIFO_OVERFLOW BIT(24)
#define CAN_TCAN4X5X_SPI_ERROR_STATUS_MASK_SPI_END_ERROR BIT(21)
#define CAN_TCAN4X5X_SPI_ERROR_STATUS_MASK_INVALID_COMMAND BIT(20)
#define CAN_TCAN4X5X_SPI_ERROR_STATUS_MASK_WRITE_OVERFLOW BIT(19)
#define CAN_TCAN4X5X_SPI_ERROR_STATUS_MASK_WRITE_UNDERFLOW BIT(18)
#define CAN_TCAN4X5X_SPI_ERROR_STATUS_MASK_READ_OVERFLOW BIT(17)
#define CAN_TCAN4X5X_SPI_ERROR_STATUS_MASK_READ_UNDERFLOW BIT(16)
/* Modes of Operation and Pin Configurations register */
#define CAN_TCAN4X5X_MODE_CONFIG 0x0800
#define CAN_TCAN4X5X_MODE_CONFIG_WAKE_CONFIG GENMASK(31, 30)
#define CAN_TCAN4X5X_MODE_CONFIG_WD_TIMER GENMASK(29, 28)
#define CAN_TCAN4X5X_MODE_CONFIG_CLK_REF BIT(27)
#define CAN_TCAN4X5X_MODE_CONFIG_GPO2_CONFIG GENMASK(23, 22)
#define CAN_TCAN4X5X_MODE_CONFIG_TEST_MODE_EN BIT(21)
#define CAN_TCAN4X5X_MODE_CONFIG_NWKRQ_VOLTAGE BIT(19)
#define CAN_TCAN4X5X_MODE_CONFIG_WD_BIT_SET BIT(18)
#define CAN_TCAN4X5X_MODE_CONFIG_WD_ACTION GENMASK(17, 16)
#define CAN_TCAN4X5X_MODE_CONFIG_GPIO1_CONFIG GENMASK(15, 14)
#define CAN_TCAN4X5X_MODE_CONFIG_FAIL_SAFE_EN BIT(13)
#define CAN_TCAN4X5X_MODE_CONFIG_GPIO1_GPO_CONFIG GENMASK(11, 10)
#define CAN_TCAN4X5X_MODE_CONFIG_INH_DIS BIT(9)
#define CAN_TCAN4X5X_MODE_CONFIG_NWKRQ_CONFIG BIT(8)
#define CAN_TCAN4X5X_MODE_CONFIG_MODE_SEL GENMASK(7, 6)
#define CAN_TCAN4X5X_MODE_CONFIG_WD_EN BIT(3)
#define CAN_TCAN4X5X_MODE_CONFIG_DEVICE_RESET BIT(2)
#define CAN_TCAN4X5X_MODE_CONFIG_SWE_DIS BIT(1)
#define CAN_TCAN4X5X_MODE_CONFIG_TEST_MODE_CONFIG BIT(0)
/* Timestamp Prescaler register */
#define CAN_TCAN4X5X_TIMESTAMP_PRESCALER 0x0804
#define CAN_TCAN4X5X_TIMESTAMP_PRESCALER_MASK GENMASK(7, 0)
/* Test Register and Scratch Pad */
#define CAN_TCAN4X5X_TEST_SCRATCH_PAD 0x0808
#define CAN_TCAN4X5X_TEST_SCRATCH_PAD_READ_WRITE GENMASK(31, 16)
#define CAN_TCAN4X5X_TEST_SCRATCH_PAD_SCRATCH_PAD GENMASK(15, 0)
/* Test register */
#define CAN_TCAN4X5X_TEST 0x0808
#define CAN_TCAN4X5X_TEST_ECC_ERR_FORCE_BIT_SEL GENMASK(21, 16)
#define CAN_TCAN4X5X_TEST_ECC_ERR_FORCE BIT(12)
#define CAN_TCAN4X5X_TEST_ECC_ERR_CHECK BIT(11)
/* Interrupts register */
#define CAN_TCAN4X5X_IR 0x0820
#define CAN_TCAN4X5X_IR_CANBUSNOM BIT(31)
#define CAN_TCAN4X5X_IR_SMS BIT(23)
#define CAN_TCAN4X5X_IR_UVSUP BIT(22)
#define CAN_TCAN4X5X_IR_UVIO BIT(21)
#define CAN_TCAN4X5X_IR_PWRON BIT(20)
#define CAN_TCAN4X5X_IR_TSD BIT(19)
#define CAN_TCAN4X5X_IR_WDTO BIT(18)
#define CAN_TCAN4X5X_IR_ECCERR BIT(16)
#define CAN_TCAN4X5X_IR_CANINT BIT(15)
#define CAN_TCAN4X5X_IR_LWU BIT(14)
#define CAN_TCAN4X5X_IR_WKERR BIT(13)
#define CAN_TCAN4X5X_IR_CANSLNT BIT(10)
#define CAN_TCAN4X5X_IR_CANDOM BIT(8)
#define CAN_TCAN4X5X_IR_GLOBALERR BIT(7)
#define CAN_TCAN4X5X_IR_WKRQ BIT(6)
#define CAN_TCAN4X5X_IR_CANERR BIT(5)
#define CAN_TCAN4X5X_IR_SPIERR BIT(3)
#define CAN_TCAN4X5X_IR_M_CAN_INT BIT(1)
#define CAN_TCAN4X5X_IR_VTWD BIT(0)
/* Mask of clearable interrupts register bits */
#define CAN_TCAN4X5X_IR_CLEAR_ALL \
(CAN_TCAN4X5X_IR_SMS | CAN_TCAN4X5X_IR_UVSUP | CAN_TCAN4X5X_IR_UVIO | \
CAN_TCAN4X5X_IR_PWRON | CAN_TCAN4X5X_IR_TSD | CAN_TCAN4X5X_IR_WDTO | \
CAN_TCAN4X5X_IR_ECCERR | CAN_TCAN4X5X_IR_CANINT | CAN_TCAN4X5X_IR_LWU | \
CAN_TCAN4X5X_IR_WKERR | CAN_TCAN4X5X_IR_CANSLNT | CAN_TCAN4X5X_IR_CANDOM)
/* MCAN Interrupts register */
#define CAN_TCAN4X5X_MCAN_IR 0x0824
#define CAN_TCAN4X5X_MCAN_IR_ARA BIT(29)
#define CAN_TCAN4X5X_MCAN_IR_PED BIT(28)
#define CAN_TCAN4X5X_MCAN_IR_PEA BIT(27)
#define CAN_TCAN4X5X_MCAN_IR_WDI BIT(26)
#define CAN_TCAN4X5X_MCAN_IR_BO BIT(25)
#define CAN_TCAN4X5X_MCAN_IR_EW BIT(24)
#define CAN_TCAN4X5X_MCAN_IR_EP BIT(23)
#define CAN_TCAN4X5X_MCAN_IR_ELO BIT(22)
#define CAN_TCAN4X5X_MCAN_IR_BEU BIT(21)
#define CAN_TCAN4X5X_MCAN_IR_BEC BIT(20)
#define CAN_TCAN4X5X_MCAN_IR_DRX BIT(19)
#define CAN_TCAN4X5X_MCAN_IR_TOO BIT(18)
#define CAN_TCAN4X5X_MCAN_IR_MRAF BIT(17)
#define CAN_TCAN4X5X_MCAN_IR_TSW BIT(16)
#define CAN_TCAN4X5X_MCAN_IR_TEFL BIT(15)
#define CAN_TCAN4X5X_MCAN_IR_TEFF BIT(14)
#define CAN_TCAN4X5X_MCAN_IR_TEFW BIT(13)
#define CAN_TCAN4X5X_MCAN_IR_TEFN BIT(12)
#define CAN_TCAN4X5X_MCAN_IR_TFE BIT(11)
#define CAN_TCAN4X5X_MCAN_IR_TCF BIT(10)
#define CAN_TCAN4X5X_MCAN_IR_TC BIT(9)
#define CAN_TCAN4X5X_MCAN_IR_HPM BIT(8)
#define CAN_TCAN4X5X_MCAN_IR_RF1L BIT(7)
#define CAN_TCAN4X5X_MCAN_IR_RF1F BIT(6)
#define CAN_TCAN4X5X_MCAN_IR_RF1W BIT(5)
#define CAN_TCAN4X5X_MCAN_IR_RF1N BIT(4)
#define CAN_TCAN4X5X_MCAN_IR_RF0L BIT(3)
#define CAN_TCAN4X5X_MCAN_IR_RF0F BIT(2)
#define CAN_TCAN4X5X_MCAN_IR_RF0W BIT(1)
#define CAN_TCAN4X5X_MCAN_IR_RF0N BIT(0)
/* Interrupt Enables register */
#define CAN_TCAN4X5X_IE 0x0830
#define CAN_TCAN4X5X_IE_UVSUP BIT(22)
#define CAN_TCAN4X5X_IE_UVIO BIT(21)
#define CAN_TCAN4X5X_IE_TSD BIT(19)
#define CAN_TCAN4X5X_IE_ECCERR BIT(16)
#define CAN_TCAN4X5X_IE_CANINT BIT(15)
#define CAN_TCAN4X5X_IE_LWU BIT(14)
#define CAN_TCAN4X5X_IE_CANSLNT BIT(10)
#define CAN_TCAN4X5X_IE_CANDOM BIT(8)
/* Bosch M_CAN registers base address */
#define CAN_TCAN4X5X_MCAN_BASE 0x1000
/* Bosch M_CAN Message RAM base address and size */
#define CAN_TCAN4X5X_MRAM_BASE 0x8000
#define CAN_TCAN4X5X_MRAM_SIZE 2048
/* TCAN4x5x SPI OP codes */
#define CAN_TCAN4X5X_WRITE_B_FL 0x61
#define CAN_TCAN4X5X_READ_B_FL 0x41
/* TCAN4x5x timing requirements */
#define CAN_TCAN4X5X_T_MODE_STBY_NOM_US 70
#define CAN_TCAN4X5X_T_WAKE_US 50
#define CAN_TCAN4X5X_T_PULSE_WIDTH_US 30
#define CAN_TCAN4X5X_T_RESET_US 1000
/*
* Only compile in support for the optional GPIOs if at least one enabled tcan4x5x device tree node
* has them. Only the INT GPIO is required.
*/
#define TCAN4X5X_RST_GPIO_SUPPORT DT_ANY_INST_HAS_PROP_STATUS_OKAY(reset_gpios)
#define TCAN4X5X_NWKRQ_GPIO_SUPPORT DT_ANY_INST_HAS_PROP_STATUS_OKAY(device_state_gpios)
#define TCAN4X5X_WAKE_GPIO_SUPPORT DT_ANY_INST_HAS_PROP_STATUS_OKAY(device_wake_gpios)
struct tcan4x5x_config {
struct spi_dt_spec spi;
#if TCAN4X5X_RST_GPIO_SUPPORT
struct gpio_dt_spec rst_gpio;
#endif /* TCAN4X5X_RST_GPIO_SUPPORT */
#if TCAN4X5X_NWKRQ_GPIO_SUPPORT
struct gpio_dt_spec nwkrq_gpio;
#endif /* TCAN4X5X_NWKRQ_GPIO_SUPPORT */
#if TCAN4X5X_WAKE_GPIO_SUPPORT
struct gpio_dt_spec wake_gpio;
#endif /* TCAN4X5X_WAKE_GPIO_SUPPORT */
struct gpio_dt_spec int_gpio;
uint32_t clk_freq;
};
struct tcan4x5x_data {
struct gpio_callback int_gpio_cb;
struct k_thread int_thread;
struct k_sem int_sem;
K_KERNEL_STACK_MEMBER(int_stack, CONFIG_CAN_TCAN4X5X_THREAD_STACK_SIZE);
};
static int tcan4x5x_read(const struct device *dev, uint16_t addr, void *dst, size_t len)
{
const struct can_mcan_config *mcan_config = dev->config;
const struct tcan4x5x_config *tcan_config = mcan_config->custom;
size_t len32 = len / sizeof(uint32_t);
uint32_t *dst32 = (uint32_t *)dst;
uint8_t cmd[4] = {CAN_TCAN4X5X_READ_B_FL, addr >> 8U & 0xFF, addr & 0xFF,
len32 == 256 ? 0U : len32};
uint8_t global_status;
const struct spi_buf tx_bufs[] = {
{.buf = &cmd, .len = sizeof(cmd)},
};
const struct spi_buf rx_bufs[] = {
{.buf = &global_status, .len = sizeof(global_status)},
{.buf = NULL, .len = 3},
{.buf = dst, .len = len},
};
const struct spi_buf_set tx = {
.buffers = tx_bufs,
.count = ARRAY_SIZE(tx_bufs),
};
const struct spi_buf_set rx = {
.buffers = rx_bufs,
.count = ARRAY_SIZE(rx_bufs),
};
int err;
int i;
if (len == 0) {
return 0;
}
/* Maximum transfer size is 256 32-bit words */
__ASSERT_NO_MSG(len % 4 == 0);
__ASSERT_NO_MSG(len32 <= 256);
err = spi_transceive_dt(&tcan_config->spi, &tx, &rx);
if (err != 0) {
LOG_ERR("failed to read addr %u, len %d (err %d)", addr, len, err);
return err;
}
__ASSERT_NO_MSG((global_status & CAN_TCAN4X5X_IR_SPIERR) == 0U);
for (i = 0; i < len32; i++) {
dst32[i] = sys_be32_to_cpu(dst32[i]);
}
return 0;
}
static int tcan4x5x_write(const struct device *dev, uint16_t addr, const void *src, size_t len)
{
const struct can_mcan_config *mcan_config = dev->config;
const struct tcan4x5x_config *tcan_config = mcan_config->custom;
size_t len32 = len / sizeof(uint32_t);
uint32_t src32[len32];
uint8_t cmd[4] = {CAN_TCAN4X5X_WRITE_B_FL, addr >> 8U & 0xFF, addr & 0xFF,
len32 == 256 ? 0U : len32};
uint8_t global_status;
const struct spi_buf tx_bufs[] = {
{.buf = &cmd, .len = sizeof(cmd)},
{.buf = &src32, .len = len},
};
const struct spi_buf rx_bufs[] = {
{.buf = &global_status, .len = sizeof(global_status)},
};
const struct spi_buf_set tx = {
.buffers = tx_bufs,
.count = ARRAY_SIZE(tx_bufs),
};
const struct spi_buf_set rx = {
.buffers = rx_bufs,
.count = ARRAY_SIZE(rx_bufs),
};
int err;
int i;
if (len == 0) {
return 0;
}
/* Maximum transfer size is 256 32-bit words */
__ASSERT_NO_MSG(len % 4 == 0);
__ASSERT_NO_MSG(len32 <= 256);
for (i = 0; i < len32; i++) {
src32[i] = sys_cpu_to_be32(((uint32_t *)src)[i]);
}
err = spi_transceive_dt(&tcan_config->spi, &tx, &rx);
if (err != 0) {
LOG_ERR("failed to write addr %u, len %d (err %d)", addr, len, err);
return err;
}
__ASSERT_NO_MSG((global_status & CAN_TCAN4X5X_IR_SPIERR) == 0U);
return 0;
}
static inline int tcan4x5x_read_tcan_reg(const struct device *dev, uint16_t reg, uint32_t *val)
{
return tcan4x5x_read(dev, reg, val, sizeof(uint32_t));
}
static inline int tcan4x5x_write_tcan_reg(const struct device *dev, uint16_t reg, uint32_t val)
{
return tcan4x5x_write(dev, reg, &val, sizeof(uint32_t));
}
static int tcan4x5x_read_mcan_reg(const struct device *dev, uint16_t reg, uint32_t *val)
{
return tcan4x5x_read(dev, CAN_TCAN4X5X_MCAN_BASE + reg, val, sizeof(uint32_t));
}
static int tcan4x5x_write_mcan_reg(const struct device *dev, uint16_t reg, uint32_t val)
{
return tcan4x5x_write(dev, CAN_TCAN4X5X_MCAN_BASE + reg, &val, sizeof(uint32_t));
}
static int tcan4x5x_read_mcan_mram(const struct device *dev, uint16_t offset, void *dst, size_t len)
{
return tcan4x5x_read(dev, CAN_TCAN4X5X_MRAM_BASE + offset, dst, len);
}
static int tcan4x5x_write_mcan_mram(const struct device *dev, uint16_t offset, const void *src,
size_t len)
{
return tcan4x5x_write(dev, CAN_TCAN4X5X_MRAM_BASE + offset, src, len);
}
static int tcan4x5x_clear_mcan_mram(const struct device *dev, uint16_t offset, size_t len)
{
static const uint8_t buf[256] = {0};
size_t pending;
size_t upto;
int err;
for (upto = 0; upto < len; upto += pending) {
pending = MIN(len - upto, sizeof(buf));
err = tcan4x5x_write_mcan_mram(dev, offset, &buf, pending);
if (err != 0) {
LOG_ERR("failed to clear message RAM (err %d)", err);
return err;
}
offset += pending;
}
return 0;
}
static int tcan4x5x_get_core_clock(const struct device *dev, uint32_t *rate)
{
const struct can_mcan_config *mcan_config = dev->config;
const struct tcan4x5x_config *tcan_config = mcan_config->custom;
*rate = tcan_config->clk_freq;
return 0;
}
static void tcan4x5x_int_gpio_callback_handler(const struct device *port, struct gpio_callback *cb,
gpio_port_pins_t pins)
{
struct tcan4x5x_data *tcan_data = CONTAINER_OF(cb, struct tcan4x5x_data, int_gpio_cb);
k_sem_give(&tcan_data->int_sem);
}
static void tcan4x5x_int_thread(void *p1, void *p2, void *p3)
{
ARG_UNUSED(p2);
ARG_UNUSED(p3);
const struct device *dev = p1;
struct can_mcan_data *mcan_data = dev->data;
struct tcan4x5x_data *tcan_data = mcan_data->custom;
uint32_t status;
uint32_t ir;
int err;
while (true) {
k_sem_take(&tcan_data->int_sem, K_FOREVER);
err = tcan4x5x_read_tcan_reg(dev, CAN_TCAN4X5X_IR, &ir);
if (err != 0) {
LOG_ERR("failed to read interrupt register (err %d)", err);
continue;
}
while (ir != 0U) {
err = tcan4x5x_write_tcan_reg(dev, CAN_TCAN4X5X_IR,
ir & CAN_TCAN4X5X_IR_CLEAR_ALL);
if (err != 0) {
LOG_ERR("failed to write interrupt register (err %d)", err);
break;
}
if ((ir & CAN_TCAN4X5X_IR_SPIERR) != 0U) {
err = tcan4x5x_read_tcan_reg(dev, CAN_TCAN4X5X_STATUS, &status);
if (err != 0) {
LOG_ERR("failed to read status register (err %d)", err);
continue;
}
LOG_ERR("SPIERR, status = 0x%08x", status);
err = tcan4x5x_write_tcan_reg(dev, CAN_TCAN4X5X_STATUS, status &
CAN_TCAN4X5X_STATUS_CLEAR_ALL);
if (err != 0) {
LOG_ERR("failed to write status register (err %d)", err);
continue;
}
}
if ((ir & CAN_TCAN4X5X_IR_M_CAN_INT) != 0U) {
can_mcan_line_0_isr(dev);
can_mcan_line_1_isr(dev);
}
err = tcan4x5x_read_tcan_reg(dev, CAN_TCAN4X5X_IR, &ir);
if (err != 0) {
LOG_ERR("failed to read interrupt register (err %d)", err);
break;
}
}
}
}
static int tcan4x5x_wake(const struct device *dev)
{
#if TCAN4X5X_WAKE_GPIO_SUPPORT
const struct can_mcan_config *mcan_config = dev->config;
const struct tcan4x5x_config *tcan_config = mcan_config->custom;
int wake_needed = 1;
int err;
#if TCAN4X5X_NWKRQ_GPIO_SUPPORT
if (tcan_config->wake_gpio.port != NULL && tcan_config->nwkrq_gpio.port != NULL) {
wake_needed = gpio_pin_get_dt(&tcan_config->nwkrq_gpio);
if (wake_needed < 0) {
LOG_ERR("failed to get nWKRQ status (err %d)", wake_needed);
return wake_needed;
};
}
#endif /* TCAN4X5X_NWKRQ_GPIO_SUPPORT */
if (tcan_config->wake_gpio.port != NULL && wake_needed != 0) {
err = gpio_pin_set_dt(&tcan_config->wake_gpio, 1);
if (err != 0) {
LOG_ERR("failed to assert WAKE GPIO (err %d)", err);
return err;
}
k_busy_wait(CAN_TCAN4X5X_T_WAKE_US);
err = gpio_pin_set_dt(&tcan_config->wake_gpio, 0);
if (err != 0) {
LOG_ERR("failed to deassert WAKE GPIO (err %d)", err);
return err;
}
}
#endif /* TCAN4X5X_WAKE_GPIO_SUPPORT*/
return 0;
}
static int tcan4x5x_reset(const struct device *dev)
{
const struct can_mcan_config *mcan_config = dev->config;
const struct tcan4x5x_config *tcan_config = mcan_config->custom;
int err;
err = tcan4x5x_wake(dev);
if (err != 0) {
return err;
}
#if TCAN4X5X_RST_GPIO_SUPPORT
if (tcan_config->rst_gpio.port != NULL) {
err = gpio_pin_set_dt(&tcan_config->rst_gpio, 1);
if (err != 0) {
LOG_ERR("failed to assert RST GPIO (err %d)", err);
return err;
}
k_busy_wait(CAN_TCAN4X5X_T_PULSE_WIDTH_US);
err = gpio_pin_set_dt(&tcan_config->rst_gpio, 0);
if (err != 0) {
LOG_ERR("failed to deassert RST GPIO (err %d)", err);
return err;
}
} else {
#endif /* TCAN4X5X_RST_GPIO_SUPPORT */
err = tcan4x5x_write_tcan_reg(dev, CAN_TCAN4X5X_MODE_CONFIG,
CAN_TCAN4X5X_MODE_CONFIG_DEVICE_RESET);
if (err != 0) {
LOG_ERR("failed to initiate SW reset (err %d)", err);
return err;
}
#if TCAN4X5X_RST_GPIO_SUPPORT
}
#endif /* TCAN4X5X_RST_GPIO_SUPPORT */
k_busy_wait(CAN_TCAN4X5X_T_RESET_US);
return 0;
}
static int tcan4x5x_init(const struct device *dev)
{
const struct can_mcan_config *mcan_config = dev->config;
const struct tcan4x5x_config *tcan_config = mcan_config->custom;
struct can_mcan_data *mcan_data = dev->data;
struct tcan4x5x_data *tcan_data = mcan_data->custom;
k_tid_t tid;
uint32_t reg;
int err;
/* Initialize int_sem to 1 to ensure any pending IRQ is serviced */
k_sem_init(&tcan_data->int_sem, 1, 1);
if (!spi_is_ready_dt(&tcan_config->spi)) {
LOG_ERR("SPI bus not ready");
return -ENODEV;
}
#if TCAN4X5X_RST_GPIO_SUPPORT
if (tcan_config->rst_gpio.port != NULL) {
if (!gpio_is_ready_dt(&tcan_config->rst_gpio)) {
LOG_ERR("RST GPIO not ready");
return -ENODEV;
}
err = gpio_pin_configure_dt(&tcan_config->rst_gpio, GPIO_OUTPUT_INACTIVE);
if (err != 0) {
LOG_ERR("failed to configure RST GPIO (err %d)", err);
return -ENODEV;
}
}
#endif /* TCAN4X5X_RST_GPIO_SUPPORT */
#if TCAN4X5X_NWKRQ_GPIO_SUPPORT
if (tcan_config->nwkrq_gpio.port != NULL) {
if (!gpio_is_ready_dt(&tcan_config->nwkrq_gpio)) {
LOG_ERR("nWKRQ GPIO not ready");
return -ENODEV;
}
err = gpio_pin_configure_dt(&tcan_config->nwkrq_gpio, GPIO_INPUT);
if (err != 0) {
LOG_ERR("failed to configure nWKRQ GPIO (err %d)", err);
return -ENODEV;
}
}
#endif /* TCAN4X5X_NWKRQ_GPIO_SUPPORT */
#if TCAN4X5X_WAKE_GPIO_SUPPORT
if (tcan_config->wake_gpio.port != NULL) {
if (!gpio_is_ready_dt(&tcan_config->wake_gpio)) {
LOG_ERR("WAKE GPIO not ready");
return -ENODEV;
}
err = gpio_pin_configure_dt(&tcan_config->wake_gpio, GPIO_OUTPUT_INACTIVE);
if (err != 0) {
LOG_ERR("failed to configure WAKE GPIO (err %d)", err);
return -ENODEV;
}
}
#endif /* TCAN4X5X_WAKE_GPIO_SUPPORT */
if (!gpio_is_ready_dt(&tcan_config->int_gpio)) {
LOG_ERR("nINT GPIO not ready");
return -ENODEV;
}
err = gpio_pin_configure_dt(&tcan_config->int_gpio, GPIO_INPUT);
if (err != 0) {
LOG_ERR("failed to configure nINT GPIO (err %d)", err);
return -ENODEV;
}
gpio_init_callback(&tcan_data->int_gpio_cb, tcan4x5x_int_gpio_callback_handler,
BIT(tcan_config->int_gpio.pin));
err = gpio_add_callback_dt(&tcan_config->int_gpio, &tcan_data->int_gpio_cb);
if (err != 0) {
LOG_ERR("failed to add nINT GPIO callback (err %d)", err);
return -ENODEV;
}
/* Initialize nINT GPIO callback and interrupt handler thread to ACK any early SPIERR */
err = gpio_pin_interrupt_configure_dt(&tcan_config->int_gpio, GPIO_INT_EDGE_TO_ACTIVE);
if (err != 0) {
LOG_ERR("failed to configure nINT GPIO interrupt (err %d)", err);
return -ENODEV;
}
tid = k_thread_create(&tcan_data->int_thread, tcan_data->int_stack,
K_KERNEL_STACK_SIZEOF(tcan_data->int_stack),
tcan4x5x_int_thread, (void *)dev, NULL, NULL,
CONFIG_CAN_TCAN4X5X_THREAD_PRIO, 0, K_NO_WAIT);
k_thread_name_set(tid, "tcan4x5x");
/* Reset TCAN */
err = tcan4x5x_reset(dev);
if (err != 0) {
return -ENODEV;
}
#if CONFIG_CAN_LOG_LEVEL >= LOG_LEVEL_DBG
uint32_t info[3];
/* Read DEVICE_ID1, DEVICE_ID2, and REVISION registers */
err = tcan4x5x_read(dev, CAN_TCAN4X5X_DEVICE_ID1, &info, sizeof(info));
if (err != 0) {
return -EIO;
}
LOG_DBG("%c%c%c%c%c%c%c%c, SPI 2 rev. %lu, device rev. ID %lu.%lu",
(char)FIELD_GET(GENMASK(7, 0), info[0]), (char)FIELD_GET(GENMASK(15, 8), info[0]),
(char)FIELD_GET(GENMASK(23, 16), info[0]),
(char)FIELD_GET(GENMASK(31, 24), info[0]), (char)FIELD_GET(GENMASK(7, 0), info[1]),
(char)FIELD_GET(GENMASK(15, 8), info[1]), (char)FIELD_GET(GENMASK(23, 16), info[1]),
(char)FIELD_GET(GENMASK(31, 24), info[1]), FIELD_GET(GENMASK(31, 24), info[2]),
FIELD_GET(GENMASK(15, 8), info[2]), FIELD_GET(GENMASK(7, 0), info[2]));
#endif /* CONFIG_CAN_LOG_LEVEL >= LOG_LEVEL_DBG */
/* Set TCAN4x5x mode normal */
err = tcan4x5x_read_tcan_reg(dev, CAN_TCAN4X5X_MODE_CONFIG, &reg);
if (err != 0) {
LOG_ERR("failed to read configuration register (err %d)", err);
return -ENODEV;
}
reg &= ~(CAN_TCAN4X5X_MODE_CONFIG_MODE_SEL);
reg |= FIELD_PREP(CAN_TCAN4X5X_MODE_CONFIG_MODE_SEL, 0x02);
reg |= CAN_TCAN4X5X_MODE_CONFIG_WAKE_CONFIG;
if (tcan_config->clk_freq == MHZ(20)) {
/* 20 MHz frequency reference */
reg &= ~(CAN_TCAN4X5X_MODE_CONFIG_CLK_REF);
} else {
/* 40 MHz frequency reference */
reg |= CAN_TCAN4X5X_MODE_CONFIG_CLK_REF;
}
err = tcan4x5x_write_tcan_reg(dev, CAN_TCAN4X5X_MODE_CONFIG, reg);
if (err != 0) {
LOG_ERR("failed to write configuration register (err %d)", err);
return -ENODEV;
}
/* Wait for standby to normal mode switch */
k_busy_wait(CAN_TCAN4X5X_T_MODE_STBY_NOM_US);
/* Configure Message RAM */
err = can_mcan_configure_mram(dev, CAN_TCAN4X5X_MRAM_BASE, CAN_TCAN4X5X_MRAM_BASE);
if (err != 0) {
return -EIO;
}
/* Initialize M_CAN */
err = can_mcan_init(dev);
if (err != 0) {
LOG_ERR("failed to initialize mcan (err %d)", err);
return err;
}
return 0;
}
static const struct can_driver_api tcan4x5x_driver_api = {
.get_capabilities = can_mcan_get_capabilities,
.start = can_mcan_start,
.stop = can_mcan_stop,
.set_mode = can_mcan_set_mode,
.set_timing = can_mcan_set_timing,
.send = can_mcan_send,
.add_rx_filter = can_mcan_add_rx_filter,
.remove_rx_filter = can_mcan_remove_rx_filter,
#ifndef CONFIG_CAN_AUTO_BUS_OFF_RECOVERY
.recover = can_mcan_recover,
#endif /* CONFIG_CAN_AUTO_BUS_OFF_RECOVERY */
.get_state = can_mcan_get_state,
.set_state_change_callback = can_mcan_set_state_change_callback,
.get_core_clock = tcan4x5x_get_core_clock,
.get_max_filters = can_mcan_get_max_filters,
.timing_min = CAN_MCAN_TIMING_MIN_INITIALIZER,
.timing_max = CAN_MCAN_TIMING_MAX_INITIALIZER,
#ifdef CONFIG_CAN_FD_MODE
.set_timing_data = can_mcan_set_timing_data,
.timing_data_min = CAN_MCAN_TIMING_DATA_MIN_INITIALIZER,
.timing_data_max = CAN_MCAN_TIMING_DATA_MAX_INITIALIZER,
#endif /* CONFIG_CAN_FD_MODE */
};
static const struct can_mcan_ops tcan4x5x_ops = {
.read_reg = tcan4x5x_read_mcan_reg,
.write_reg = tcan4x5x_write_mcan_reg,
.read_mram = tcan4x5x_read_mcan_mram,
.write_mram = tcan4x5x_write_mcan_mram,
.clear_mram = tcan4x5x_clear_mcan_mram,
};
#if TCAN4X5X_RST_GPIO_SUPPORT
#define TCAN4X5X_RST_GPIO_INIT(inst) \
.rst_gpio = GPIO_DT_SPEC_INST_GET_OR(inst, reset_gpios, {0}),
#else /* TCAN4X5X_RST_GPIO_SUPPORT */
#define TCAN4X5X_RST_GPIO_INIT(inst)
#endif /* !TCAN4X5X_RST_GPIO_SUPPORT */
#if TCAN4X5X_NWKRQ_GPIO_SUPPORT
#define TCAN4X5X_NWKRQ_GPIO_INIT(inst) \
.nwkrq_gpio = GPIO_DT_SPEC_INST_GET_OR(inst, device_state_gpios, {0}),
#else /* TCAN4X5X_NWKRQ_GPIO_SUPPORT */
#define TCAN4X5X_NWKRQ_GPIO_INIT(inst)
#endif /* !TCAN4X5X_NWKRQ_GPIO_SUPPORT */
#if TCAN4X5X_WAKE_GPIO_SUPPORT
#define TCAN4X5X_WAKE_GPIO_INIT(inst) \
.wake_gpio = GPIO_DT_SPEC_INST_GET_OR(inst, device_wake_gpios, {0}),
#else /* TCAN4X5X_WAKE_GPIO_SUPPORT */
#define TCAN4X5X_WAKE_GPIO_INIT(inst)
#endif /* !TCAN4X5X_WAKE_GPIO_SUPPORT */
#define TCAN4X5X_INIT(inst) \
BUILD_ASSERT(CAN_MCAN_DT_INST_MRAM_OFFSET(inst) == 0, "MRAM offset must be 0"); \
BUILD_ASSERT(CAN_MCAN_DT_INST_MRAM_ELEMENTS_SIZE(inst) <= CAN_TCAN4X5X_MRAM_SIZE, \
"Insufficient Message RAM size to hold elements"); \
\
CAN_MCAN_DT_INST_BUILD_ASSERT_MRAM_CFG(inst); \
CAN_MCAN_DT_INST_CALLBACKS_DEFINE(inst, tcan4x5x_cbs_##inst); \
\
static const struct tcan4x5x_config tcan4x5x_config_##inst = { \
.spi = SPI_DT_SPEC_INST_GET(inst, SPI_WORD_SET(8), 0), \
.int_gpio = GPIO_DT_SPEC_INST_GET(inst, int_gpios), \
.clk_freq = DT_INST_PROP(inst, clock_frequency), \
TCAN4X5X_RST_GPIO_INIT(inst) \
TCAN4X5X_NWKRQ_GPIO_INIT(inst) \
TCAN4X5X_WAKE_GPIO_INIT(inst) \
}; \
\
static const struct can_mcan_config can_mcan_config_##inst = CAN_MCAN_DT_CONFIG_INST_GET( \
inst, &tcan4x5x_config_##inst, &tcan4x5x_ops, &tcan4x5x_cbs_##inst); \
\
static struct tcan4x5x_data tcan4x5x_data_##inst; \
\
static struct can_mcan_data can_mcan_data_##inst = \
CAN_MCAN_DATA_INITIALIZER(&tcan4x5x_data_##inst); \
\
CAN_DEVICE_DT_INST_DEFINE(inst, tcan4x5x_init, NULL, &can_mcan_data_##inst, \
&can_mcan_config_##inst, POST_KERNEL, CONFIG_CAN_INIT_PRIORITY, \
&tcan4x5x_driver_api);
DT_INST_FOREACH_STATUS_OKAY(TCAN4X5X_INIT)