| /** |
| ****************************************************************************** |
| * @file stm32l4xx_hal_swpmi.h |
| * @author MCD Application Team |
| * @brief Header file of SWPMI HAL module. |
| ****************************************************************************** |
| * @attention |
| * |
| * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2> |
| * |
| * Redistribution and use in source and binary forms, with or without modification, |
| * are permitted provided that the following conditions are met: |
| * 1. Redistributions of source code must retain the above copyright notice, |
| * this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright notice, |
| * this list of conditions and the following disclaimer in the documentation |
| * and/or other materials provided with the distribution. |
| * 3. Neither the name of STMicroelectronics nor the names of its contributors |
| * may be used to endorse or promote products derived from this software |
| * without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
| * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
| * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
| * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| ****************************************************************************** |
| */ |
| |
| /* Define to prevent recursive inclusion -------------------------------------*/ |
| #ifndef __STM32L4xx_HAL_SWPMI_H |
| #define __STM32L4xx_HAL_SWPMI_H |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| #if defined(STM32L431xx) || defined(STM32L432xx) || defined(STM32L433xx) || defined(STM32L442xx) || defined(STM32L443xx) || \ |
| defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) || \ |
| defined(STM32L496xx) || defined(STM32L4A6xx) |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32l4xx_hal_def.h" |
| |
| /** @addtogroup STM32L4xx_HAL_Driver |
| * @{ |
| */ |
| |
| /** @addtogroup SWPMI |
| * @{ |
| */ |
| |
| /* Exported types ------------------------------------------------------------*/ |
| /** @defgroup SWPMI_Exported_Types SWPMI Exported Types |
| * @{ |
| */ |
| |
| /** |
| * @brief SWPMI Init Structure definition |
| */ |
| typedef struct |
| { |
| uint32_t VoltageClass; /*!< Specifies the SWP Voltage Class. |
| This parameter can be a value of @ref SWPMI_Voltage_Class */ |
| |
| uint32_t BitRate; /*!< Specifies the SWPMI Bitrate. |
| This parameter must be a number between 0 and 63. |
| The Bitrate is computed using the following formula: |
| SWPMI_freq = SWPMI_clk / (((BitRate) + 1) * 4) |
| */ |
| |
| uint32_t TxBufferingMode; /*!< Specifies the transmission buffering mode. |
| This parameter can be a value of @ref SWPMI_Tx_Buffering_Mode */ |
| |
| uint32_t RxBufferingMode; /*!< Specifies the reception buffering mode. |
| This parameter can be a value of @ref SWPMI_Rx_Buffering_Mode */ |
| |
| }SWPMI_InitTypeDef; |
| |
| |
| /** |
| * @brief HAL SWPMI State structures definition |
| */ |
| typedef enum |
| { |
| HAL_SWPMI_STATE_RESET = 0x00, /*!< Peripheral Reset state */ |
| HAL_SWPMI_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */ |
| HAL_SWPMI_STATE_BUSY = 0x02, /*!< an internal process is ongoing */ |
| HAL_SWPMI_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */ |
| HAL_SWPMI_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */ |
| HAL_SWPMI_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */ |
| HAL_SWPMI_STATE_TIMEOUT = 0x03, /*!< Timeout state */ |
| HAL_SWPMI_STATE_ERROR = 0x04 /*!< Error */ |
| }HAL_SWPMI_StateTypeDef; |
| |
| /** |
| * @brief SWPMI handle Structure definition |
| */ |
| typedef struct |
| { |
| SWPMI_TypeDef *Instance; /* SWPMI registers base address */ |
| |
| SWPMI_InitTypeDef Init; /* SWMPI communication parameters */ |
| |
| uint32_t *pTxBuffPtr; /* Pointer to SWPMI Tx transfer Buffer */ |
| |
| uint32_t TxXferSize; /* SWPMI Tx Transfer size */ |
| |
| uint32_t TxXferCount; /* SWPMI Tx Transfer Counter */ |
| |
| uint32_t *pRxBuffPtr; /* Pointer to SWPMI Rx transfer Buffer */ |
| |
| uint32_t RxXferSize; /* SWPMI Rx Transfer size */ |
| |
| uint32_t RxXferCount; /* SWPMI Rx Transfer Counter */ |
| |
| DMA_HandleTypeDef *hdmatx; /* SWPMI Tx DMA Handle parameters */ |
| |
| DMA_HandleTypeDef *hdmarx; /* SWPMI Rx DMA Handle parameters */ |
| |
| HAL_LockTypeDef Lock; /* SWPMI object */ |
| |
| __IO HAL_SWPMI_StateTypeDef State; /* SWPMI communication state */ |
| |
| __IO uint32_t ErrorCode; /* SWPMI Error code */ |
| |
| }SWPMI_HandleTypeDef; |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported constants --------------------------------------------------------*/ |
| /** @defgroup SWPMI_Exported_Constants SWPMI Exported Constants |
| * @{ |
| */ |
| |
| /** |
| * @defgroup SWPMI_Error_Code SWPMI Error Code Bitmap |
| * @{ |
| */ |
| #define HAL_SWPMI_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */ |
| #define HAL_SWPMI_ERROR_CRC ((uint32_t)0x00000004) /*!< frame error */ |
| #define HAL_SWPMI_ERROR_OVR ((uint32_t)0x00000008) /*!< Overrun error */ |
| #define HAL_SWPMI_ERROR_UDR ((uint32_t)0x0000000C) /*!< Underrun error */ |
| #define HAL_SWPMI_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup SWPMI_Voltage_Class SWPMI Voltage Class |
| * @{ |
| */ |
| #define SWPMI_VOLTAGE_CLASS_C ((uint32_t)0x00000000) |
| #define SWPMI_VOLTAGE_CLASS_B SWPMI_OR_CLASS |
| /** |
| * @} |
| */ |
| |
| /** @defgroup SWPMI_Tx_Buffering_Mode SWPMI Tx Buffering Mode |
| * @{ |
| */ |
| #define SWPMI_TX_NO_SOFTWAREBUFFER ((uint32_t)0x00000000) |
| #define SWPMI_TX_SINGLE_SOFTWAREBUFFER ((uint32_t)0x00000000) |
| #define SWPMI_TX_MULTI_SOFTWAREBUFFER SWPMI_CR_TXMODE |
| /** |
| * @} |
| */ |
| |
| /** @defgroup SWPMI_Rx_Buffering_Mode SWPMI Rx Buffering Mode |
| * @{ |
| */ |
| #define SWPMI_RX_NO_SOFTWAREBUFFER ((uint32_t)0x00000000) |
| #define SWPMI_RX_SINGLE_SOFTWAREBUFFER ((uint32_t)0x00000000) |
| #define SWPMI_RX_MULTI_SOFTWAREBUFFER SWPMI_CR_RXMODE |
| /** |
| * @} |
| */ |
| |
| /** @defgroup SWPMI_Flags SWPMI Status Flags |
| * Elements values convention: 0xXXXXXXXX |
| * - 0xXXXXXXXX : Flag mask in the ISR register |
| * @{ |
| */ |
| #define SWPMI_FLAG_RXBFF SWPMI_ISR_RXBFF |
| #define SWPMI_FLAG_TXBEF SWPMI_ISR_TXBEF |
| #define SWPMI_FLAG_RXBERF SWPMI_ISR_RXBERF |
| #define SWPMI_FLAG_RXOVRF SWPMI_ISR_RXOVRF |
| #define SWPMI_FLAG_TXUNRF SWPMI_ISR_TXUNRF |
| #define SWPMI_FLAG_RXNE SWPMI_ISR_RXNE |
| #define SWPMI_FLAG_TXE SWPMI_ISR_TXE |
| #define SWPMI_FLAG_TCF SWPMI_ISR_TCF |
| #define SWPMI_FLAG_SRF SWPMI_ISR_SRF |
| #define SWPMI_FLAG_SUSP SWPMI_ISR_SUSP |
| #define SWPMI_FLAG_DEACTF SWPMI_ISR_DEACTF |
| /** |
| * @} |
| */ |
| |
| /** @defgroup SWPMI_Interrupt_definition SWPMI Interrupts Definition |
| * Elements values convention: 0xXXXX |
| * - 0xXXXX : Flag mask in the IER register |
| * @{ |
| */ |
| #define SWPMI_IT_SRIE SWPMI_IER_SRIE |
| #define SWPMI_IT_TCIE SWPMI_IER_TCIE |
| #define SWPMI_IT_TIE SWPMI_IER_TIE |
| #define SWPMI_IT_RIE SWPMI_IER_RIE |
| #define SWPMI_IT_TXUNRIE SWPMI_IER_TXUNRIE |
| #define SWPMI_IT_RXOVRIE SWPMI_IER_RXOVRIE |
| #define SWPMI_IT_RXBERIE SWPMI_IER_RXBERIE |
| #define SWPMI_IT_TXBEIE SWPMI_IER_TXBEIE |
| #define SWPMI_IT_RXBFIE SWPMI_IER_RXBFIE |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported macros -----------------------------------------------------------*/ |
| /** @defgroup SWPMI_Exported_Macros SWPMI Exported Macros |
| * @{ |
| */ |
| |
| /** @brief Reset SWPMI handle state. |
| * @param __HANDLE__: specifies the SWPMI Handle. |
| * @retval None |
| */ |
| #define __HAL_SWPMI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SWPMI_STATE_RESET) |
| |
| /** |
| * @brief Enable the SWPMI peripheral. |
| * @param __HANDLE__: SWPMI handle |
| * @retval None |
| */ |
| #define __HAL_SWPMI_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR, SWPMI_CR_SWPACT) |
| |
| /** |
| * @brief Disable the SWPMI peripheral. |
| * @param __HANDLE__: SWPMI handle |
| * @retval None |
| */ |
| #define __HAL_SWPMI_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR, SWPMI_CR_SWPACT) |
| |
| /** @brief Check whether the specified SWPMI flag is set or not. |
| * @param __HANDLE__: specifies the SWPMI Handle. |
| * @param __FLAG__: specifies the flag to check. |
| * This parameter can be one of the following values: |
| * @arg SWPMI_FLAG_RXBFF : Receive buffer full flag. |
| * @arg SWPMI_FLAG_TXBEF : Transmit buffer empty flag. |
| * @arg SWPMI_FLAG_RXBERF : Receive CRC error flag. |
| * @arg SWPMI_FLAG_RXOVRF : Receive overrun error flag. |
| * @arg SWPMI_FLAG_TXUNRF : Transmit underrun error flag. |
| * @arg SWPMI_FLAG_RXNE : Receive data register not empty. |
| * @arg SWPMI_FLAG_TXE : Transmit data register empty. |
| * @arg SWPMI_FLAG_TCF : Transfer complete flag. |
| * @arg SWPMI_FLAG_SRF : Slave resume flag. |
| * @arg SWPMI_FLAG_SUSP : SUSPEND flag. |
| * @arg SWPMI_FLAG_DEACTF : DEACTIVATED flag. |
| * @retval The new state of __FLAG__ (TRUE or FALSE). |
| */ |
| #define __HAL_SWPMI_GET_FLAG(__HANDLE__, __FLAG__) (READ_BIT((__HANDLE__)->Instance->ISR, (__FLAG__)) == (__FLAG__)) |
| |
| /** @brief Clear the specified SWPMI ISR flag. |
| * @param __HANDLE__: specifies the SWPMI Handle. |
| * @param __FLAG__: specifies the flag to clear. |
| * This parameter can be one of the following values: |
| * @arg SWPMI_FLAG_RXBFF : Receive buffer full flag. |
| * @arg SWPMI_FLAG_TXBEF : Transmit buffer empty flag. |
| * @arg SWPMI_FLAG_RXBERF : Receive CRC error flag. |
| * @arg SWPMI_FLAG_RXOVRF : Receive overrun error flag. |
| * @arg SWPMI_FLAG_TXUNRF : Transmit underrun error flag. |
| * @arg SWPMI_FLAG_TCF : Transfer complete flag. |
| * @arg SWPMI_FLAG_SRF : Slave resume flag. |
| * @retval None |
| */ |
| #define __HAL_SWPMI_CLEAR_FLAG(__HANDLE__, __FLAG__) WRITE_REG((__HANDLE__)->Instance->ICR, (__FLAG__)) |
| |
| /** @brief Enable the specified SWPMI interrupt. |
| * @param __HANDLE__: specifies the SWPMI Handle. |
| * @param __INTERRUPT__: specifies the SWPMI interrupt source to enable. |
| * This parameter can be one of the following values: |
| * @arg SWPMI_IT_SRIE : Slave resume interrupt. |
| * @arg SWPMI_IT_TCIE : Transmit complete interrupt. |
| * @arg SWPMI_IT_TIE : Transmit interrupt. |
| * @arg SWPMI_IT_RIE : Receive interrupt. |
| * @arg SWPMI_IT_TXUNRIE : Transmit underrun error interrupt. |
| * @arg SWPMI_IT_RXOVRIE : Receive overrun error interrupt. |
| * @arg SWPMI_IT_RXBEIE : Receive CRC error interrupt. |
| * @arg SWPMI_IT_TXBEIE : Transmit buffer empty interrupt. |
| * @arg SWPMI_IT_RXBFIE : Receive buffer full interrupt. |
| * @retval None |
| */ |
| #define __HAL_SWPMI_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->IER, (__INTERRUPT__)) |
| |
| /** @brief Disable the specified SWPMI interrupt. |
| * @param __HANDLE__: specifies the SWPMI Handle. |
| * @param __INTERRUPT__: specifies the SWPMI interrupt source to disable. |
| * This parameter can be one of the following values: |
| * @arg SWPMI_IT_SRIE : Slave resume interrupt. |
| * @arg SWPMI_IT_TCIE : Transmit complete interrupt. |
| * @arg SWPMI_IT_TIE : Transmit interrupt. |
| * @arg SWPMI_IT_RIE : Receive interrupt. |
| * @arg SWPMI_IT_TXUNRIE : Transmit underrun error interrupt. |
| * @arg SWPMI_IT_RXOVRIE : Receive overrun error interrupt. |
| * @arg SWPMI_IT_RXBEIE : Receive CRC error interrupt. |
| * @arg SWPMI_IT_TXBEIE : Transmit buffer empty interrupt. |
| * @arg SWPMI_IT_RXBFIE : Receive buffer full interrupt. |
| * @retval None |
| */ |
| #define __HAL_SWPMI_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->IER, (__INTERRUPT__)) |
| |
| /** @brief Check whether the specified SWPMI interrupt has occurred or not. |
| * @param __HANDLE__: specifies the SWPMI Handle. |
| * @param __IT__: specifies the SWPMI interrupt to check. |
| * This parameter can be one of the following values: |
| * @arg SWPMI_IT_SRIE : Slave resume interrupt. |
| * @arg SWPMI_IT_TCIE : Transmit complete interrupt. |
| * @arg SWPMI_IT_TIE : Transmit interrupt. |
| * @arg SWPMI_IT_RIE : Receive interrupt. |
| * @arg SWPMI_IT_TXUNRIE : Transmit underrun error interrupt. |
| * @arg SWPMI_IT_RXOVRIE : Receive overrun error interrupt. |
| * @arg SWPMI_IT_RXBERIE : Receive CRC error interrupt. |
| * @arg SWPMI_IT_TXBEIE : Transmit buffer empty interrupt. |
| * @arg SWPMI_IT_RXBFIE : Receive buffer full interrupt. |
| * @retval The new state of __IT__ (TRUE or FALSE). |
| */ |
| #define __HAL_SWPMI_GET_IT(__HANDLE__, __IT__) (READ_BIT((__HANDLE__)->Instance->ISR,(__IT__)) == (__IT__)) |
| |
| /** @brief Check whether the specified SWPMI interrupt source is enabled or not. |
| * @param __HANDLE__: specifies the SWPMI Handle. |
| * @param __IT__: specifies the SWPMI interrupt source to check. |
| * This parameter can be one of the following values: |
| * @arg SWPMI_IT_SRIE : Slave resume interrupt. |
| * @arg SWPMI_IT_TCIE : Transmit complete interrupt. |
| * @arg SWPMI_IT_TIE : Transmit interrupt. |
| * @arg SWPMI_IT_RIE : Receive interrupt. |
| * @arg SWPMI_IT_TXUNRIE : Transmit underrun error interrupt. |
| * @arg SWPMI_IT_RXOVRIE : Receive overrun error interrupt. |
| * @arg SWPMI_IT_RXBERIE : Receive CRC error interrupt. |
| * @arg SWPMI_IT_TXBEIE : Transmit buffer empty interrupt. |
| * @arg SWPMI_IT_RXBFIE : Receive buffer full interrupt. |
| * @retval The new state of __IT__ (TRUE or FALSE). |
| */ |
| #define __HAL_SWPMI_GET_IT_SOURCE(__HANDLE__, __IT__) ((READ_BIT((__HANDLE__)->Instance->IER, (__IT__)) == (__IT__)) ? SET : RESET) |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported functions --------------------------------------------------------*/ |
| /** @defgroup SWPMI_Exported_Functions SWPMI Exported Functions |
| * @{ |
| */ |
| /* Initialization/de-initialization functions ********************************/ |
| HAL_StatusTypeDef HAL_SWPMI_Init(SWPMI_HandleTypeDef *hswpmi); |
| HAL_StatusTypeDef HAL_SWPMI_DeInit(SWPMI_HandleTypeDef *hswpmi); |
| void HAL_SWPMI_MspInit(SWPMI_HandleTypeDef *hswpmi); |
| void HAL_SWPMI_MspDeInit(SWPMI_HandleTypeDef *hswpmi); |
| |
| /* IO operation functions *****************************************************/ |
| HAL_StatusTypeDef HAL_SWPMI_Transmit(SWPMI_HandleTypeDef *hswpmi, uint32_t *pData, uint16_t Size, uint32_t Timeout); |
| HAL_StatusTypeDef HAL_SWPMI_Receive(SWPMI_HandleTypeDef *hswpmi, uint32_t *pData, uint16_t Size, uint32_t Timeout); |
| HAL_StatusTypeDef HAL_SWPMI_Transmit_IT(SWPMI_HandleTypeDef *hswpmi, uint32_t *pData, uint16_t Size); |
| HAL_StatusTypeDef HAL_SWPMI_Receive_IT(SWPMI_HandleTypeDef *hswpmi, uint32_t *pData, uint16_t Size); |
| HAL_StatusTypeDef HAL_SWPMI_Transmit_DMA(SWPMI_HandleTypeDef *hswpmi, uint32_t *pData, uint16_t Size); |
| HAL_StatusTypeDef HAL_SWPMI_Receive_DMA(SWPMI_HandleTypeDef *hswpmi, uint32_t *pData, uint16_t Size); |
| HAL_StatusTypeDef HAL_SWPMI_DMAStop(SWPMI_HandleTypeDef *hswpmi); |
| HAL_StatusTypeDef HAL_SWPMI_EnableLoopback(SWPMI_HandleTypeDef *hswpmi); |
| HAL_StatusTypeDef HAL_SWPMI_DisableLoopback(SWPMI_HandleTypeDef *hswpmi); |
| void HAL_SWPMI_IRQHandler(SWPMI_HandleTypeDef *hswpmi); |
| void HAL_SWPMI_TxCpltCallback(SWPMI_HandleTypeDef *hswpmi); |
| void HAL_SWPMI_TxHalfCpltCallback(SWPMI_HandleTypeDef *hswpmi); |
| void HAL_SWPMI_RxCpltCallback(SWPMI_HandleTypeDef *hswpmi); |
| void HAL_SWPMI_RxHalfCpltCallback(SWPMI_HandleTypeDef *hswpmi); |
| void HAL_SWPMI_ErrorCallback(SWPMI_HandleTypeDef *hswpmi); |
| |
| /* Peripheral Control and State functions ************************************/ |
| HAL_SWPMI_StateTypeDef HAL_SWPMI_GetState(SWPMI_HandleTypeDef *hswpmi); |
| uint32_t HAL_SWPMI_GetError(SWPMI_HandleTypeDef *hswpmi); |
| |
| /** |
| * @} |
| */ |
| |
| /* Private types -------------------------------------------------------------*/ |
| /** @defgroup SWPMI_Private_Types SWPMI Private Types |
| * @{ |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Private variables ---------------------------------------------------------*/ |
| /** @defgroup SWPMI_Private_Variables SWPMI Private Variables |
| * @{ |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Private constants ---------------------------------------------------------*/ |
| /** @defgroup SWPMI_Private_Constants SWPMI Private Constants |
| * @{ |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Private macros ------------------------------------------------------------*/ |
| /** @defgroup SWPMI_Private_Macros SWPMI Private Macros |
| * @{ |
| */ |
| |
| |
| #define IS_SWPMI_VOLTAGE_CLASS(__CLASS__) (((__CLASS__) == SWPMI_VOLTAGE_CLASS_C) || \ |
| ((__CLASS__) == SWPMI_VOLTAGE_CLASS_B)) |
| |
| #define IS_SWPMI_BITRATE_VALUE(__VALUE__) (((__VALUE__) <= 63)) |
| |
| |
| #define IS_SWPMI_TX_BUFFERING_MODE(__MODE__) (((__MODE__) == SWPMI_TX_NO_SOFTWAREBUFFER) || \ |
| ((__MODE__) == SWPMI_TX_MULTI_SOFTWAREBUFFER)) |
| |
| |
| #define IS_SWPMI_RX_BUFFERING_MODE(__MODE__) (((__MODE__) == SWPMI_RX_NO_SOFTWAREBUFFER) || \ |
| ((__MODE__) == SWPMI_RX_MULTI_SOFTWAREBUFFER)) |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| #endif /* STM32L431xx || STM32L432xx || STM32L433xx || STM32L442xx || STM32L443xx || */ |
| /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx || */ |
| /* STM32L496xx || STM32L4A6xx */ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* __STM32L4xx_HAL_SWPMI_H */ |
| |
| /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |
