| /* |
| * Copyright 2018 Foundries.io Ltd |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <zephyr/dt-bindings/interrupt-controller/openisa-intmux.h> |
| #include <zephyr/dt-bindings/gpio/gpio.h> |
| #include <zephyr/dt-bindings/i2c/i2c.h> |
| #include <zephyr/dt-bindings/pwm/pwm.h> |
| |
| / { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| chosen { |
| zephyr,entropy = &trng; |
| zephyr,flash-controller = &ftfe; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cpu@0 { |
| device_type = "cpu"; |
| compatible = "riscv"; |
| reg = <0>; |
| }; |
| |
| cpu@1 { |
| device_type = "cpu"; |
| compatible = "riscv"; |
| reg = <1>; |
| }; |
| }; |
| |
| m4_dtcm: memory@20000000 { |
| compatible = "mmio-sram"; |
| reg = <0x20000000 0x30000>; |
| }; |
| |
| m0_tcm: memory@9000000 { |
| compatible = "mmio-sram"; |
| reg = <0x09000000 0x20000>; |
| }; |
| |
| /* Dummy pinctrl node, filled with pin mux options at board level */ |
| pinctrl: pinctrl { |
| compatible = "openisa,rv32m1-pinctrl"; |
| status = "okay"; |
| }; |
| |
| soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "simple-bus"; |
| ranges; |
| |
| pcc0: clock-controller@4002b000 { |
| compatible = "openisa,rv32m1-pcc"; |
| reg = <0x4002b000 0x200>; |
| #clock-cells = <1>; |
| }; |
| |
| pcc1: clock-controller@41027000 { |
| compatible = "openisa,rv32m1-pcc"; |
| reg = <0x41027000 0x200>; |
| #clock-cells = <1>; |
| }; |
| |
| event0: interrupt-controller@e0041000 { |
| compatible = "openisa,rv32m1-event-unit"; |
| #address-cells = <0>; |
| #interrupt-cells = <1>; |
| interrupt-controller; |
| reg = <0xe0041000 0x88>; |
| }; |
| |
| event1: interrupt-controller@4101f000 { |
| compatible = "openisa,rv32m1-event-unit"; |
| #address-cells = <0>; |
| #interrupt-cells = <1>; |
| interrupt-controller; |
| reg = <0x4101f000 0x88>; |
| }; |
| |
| intmux0: intmux@4004f000 { |
| compatible = "openisa,rv32m1-intmux"; |
| reg = <0x4004f000 0x200>; |
| clocks = <&pcc0 0x13c>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| ranges = <0x0 0x4004f000 0x200>; |
| |
| intmux0_ch0: interrupt-controller@0 { |
| compatible = "openisa,rv32m1-intmux-ch"; |
| #address-cells = <0>; |
| #interrupt-cells = <1>; |
| interrupt-controller; |
| interrupts = <INTMUX_CH0_IRQ>; |
| reg = <0x0 0x40>; |
| status = "disabled"; |
| }; |
| |
| intmux0_ch1: interrupt-controller@40 { |
| compatible = "openisa,rv32m1-intmux-ch"; |
| #address-cells = <0>; |
| #interrupt-cells = <1>; |
| interrupt-controller; |
| interrupts = <INTMUX_CH1_IRQ>; |
| reg = <0x40 0x40>; |
| status = "disabled"; |
| }; |
| |
| intmux0_ch2: interrupt-controller@80 { |
| compatible = "openisa,rv32m1-intmux-ch"; |
| #address-cells = <0>; |
| #interrupt-cells = <1>; |
| interrupt-controller; |
| interrupts = <INTMUX_CH2_IRQ>; |
| reg = <0x80 0x40>; |
| status = "disabled"; |
| }; |
| |
| intmux0_ch3: interrupt-controller@c0 { |
| compatible = "openisa,rv32m1-intmux-ch"; |
| #address-cells = <0>; |
| #interrupt-cells = <1>; |
| interrupt-controller; |
| interrupts = <INTMUX_CH3_IRQ>; |
| reg = <0xc0 0x40>; |
| status = "disabled"; |
| }; |
| |
| intmux0_ch4: interrupt-controller@100 { |
| compatible = "openisa,rv32m1-intmux-ch"; |
| #address-cells = <0>; |
| #interrupt-cells = <1>; |
| interrupt-controller; |
| interrupts = <INTMUX_CH4_IRQ>; |
| reg = <0x100 0x40>; |
| status = "disabled"; |
| }; |
| |
| intmux0_ch5: interrupt-controller@140 { |
| compatible = "openisa,rv32m1-intmux-ch"; |
| #address-cells = <0>; |
| #interrupt-cells = <1>; |
| interrupt-controller; |
| interrupts = <INTMUX_CH5_IRQ>; |
| reg = <0x140 0x40>; |
| status = "disabled"; |
| }; |
| |
| intmux0_ch6: interrupt-controller@180 { |
| compatible = "openisa,rv32m1-intmux-ch"; |
| #address-cells = <0>; |
| #interrupt-cells = <1>; |
| interrupt-controller; |
| interrupts = <INTMUX_CH6_IRQ>; |
| reg = <0x180 0x40>; |
| status = "disabled"; |
| }; |
| |
| intmux0_ch7: interrupt-controller@1c0 { |
| compatible = "openisa,rv32m1-intmux-ch"; |
| #address-cells = <0>; |
| #interrupt-cells = <1>; |
| interrupt-controller; |
| interrupts = <INTMUX_CH7_IRQ>; |
| reg = <0x1c0 0x40>; |
| status = "disabled"; |
| }; |
| }; |
| |
| intmux1: intmux@41022000 { |
| compatible = "openisa,rv32m1-intmux"; |
| reg = <0x41022000 0x20>; |
| clocks = <&pcc1 0x88>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| ranges = <0x0 0x41022000 0x200>; |
| |
| intmux1_ch0: interrupt-controller@0 { |
| compatible = "openisa,rv32m1-intmux-ch"; |
| #address-cells = <0>; |
| #interrupt-cells = <1>; |
| interrupt-controller; |
| interrupts = <INTMUX_CH0_IRQ>; |
| reg = <0x0 0x40>; |
| status = "disabled"; |
| }; |
| |
| intmux1_ch1: interrupt-controller@40 { |
| compatible = "openisa,rv32m1-intmux-ch"; |
| #address-cells = <0>; |
| #interrupt-cells = <1>; |
| interrupt-controller; |
| interrupts = <INTMUX_CH1_IRQ>; |
| reg = <0x40 0x40>; |
| status = "disabled"; |
| }; |
| |
| intmux1_ch2: interrupt-controller@80 { |
| compatible = "openisa,rv32m1-intmux-ch"; |
| #address-cells = <0>; |
| #interrupt-cells = <1>; |
| interrupt-controller; |
| interrupts = <INTMUX_CH2_IRQ>; |
| reg = <0x80 0x40>; |
| status = "disabled"; |
| }; |
| |
| intmux1_ch3: interrupt-controller@c0 { |
| compatible = "openisa,rv32m1-intmux-ch"; |
| #address-cells = <0>; |
| #interrupt-cells = <1>; |
| interrupt-controller; |
| interrupts = <INTMUX_CH3_IRQ>; |
| reg = <0xc0 0x40>; |
| status = "disabled"; |
| }; |
| |
| intmux1_ch4: interrupt-controller@100 { |
| compatible = "openisa,rv32m1-intmux-ch"; |
| #address-cells = <0>; |
| #interrupt-cells = <1>; |
| interrupt-controller; |
| interrupts = <INTMUX_CH4_IRQ>; |
| reg = <0x100 0x40>; |
| status = "disabled"; |
| }; |
| |
| intmux1_ch5: interrupt-controller@140 { |
| compatible = "openisa,rv32m1-intmux-ch"; |
| #address-cells = <0>; |
| #interrupt-cells = <1>; |
| interrupt-controller; |
| interrupts = <INTMUX_CH5_IRQ>; |
| reg = <0x140 0x40>; |
| status = "disabled"; |
| }; |
| |
| intmux1_ch6: interrupt-controller@180 { |
| compatible = "openisa,rv32m1-intmux-ch"; |
| #address-cells = <0>; |
| #interrupt-cells = <1>; |
| interrupt-controller; |
| interrupts = <INTMUX_CH6_IRQ>; |
| reg = <0x180 0x40>; |
| status = "disabled"; |
| }; |
| |
| intmux1_ch7: interrupt-controller@1c0 { |
| compatible = "openisa,rv32m1-intmux-ch"; |
| #address-cells = <0>; |
| #interrupt-cells = <1>; |
| interrupt-controller; |
| interrupts = <INTMUX_CH7_IRQ>; |
| reg = <0x1c0 0x40>; |
| status = "disabled"; |
| }; |
| }; |
| |
| lptmr0: timer@40032000 { |
| compatible = "openisa,rv32m1-lptmr"; |
| reg = <0x40032000 0x10>; |
| }; |
| |
| lptmr1: timer@40033000 { |
| compatible = "openisa,rv32m1-lptmr"; |
| reg = <0x40033000 0x10>; |
| }; |
| |
| lptmr2: timer@4102b000 { |
| compatible = "openisa,rv32m1-lptmr"; |
| reg = <0x4102b000 0x10>; |
| }; |
| |
| porta: pinmux@40046000 { |
| compatible = "openisa,rv32m1-pinmux"; |
| reg = <0x40046000 0xd0>; |
| clocks = <&pcc0 0x118>; |
| }; |
| |
| portb: pinmux@40047000 { |
| compatible = "openisa,rv32m1-pinmux"; |
| reg = <0x40047000 0xd0>; |
| clocks = <&pcc0 0x11c>; |
| }; |
| |
| portc: pinmux@40048000 { |
| compatible = "openisa,rv32m1-pinmux"; |
| reg = <0x40048000 0xd0>; |
| clocks = <&pcc0 0x120>; |
| }; |
| |
| portd: pinmux@40049000 { |
| compatible = "openisa,rv32m1-pinmux"; |
| reg = <0x40049000 0xd0>; |
| clocks = <&pcc0 0x124>; |
| }; |
| |
| porte: pinmux@41037000 { |
| compatible = "openisa,rv32m1-pinmux"; |
| reg = <0x41037000 0xd0>; |
| clocks = <&pcc1 0xdc>; |
| }; |
| |
| gpioa: gpio@48020000 { |
| compatible = "openisa,rv32m1-gpio"; |
| reg = <0x48020000 0x14>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| openisa,rv32m1-port = <&porta>; |
| }; |
| |
| gpiob: gpio@48020040 { |
| compatible = "openisa,rv32m1-gpio"; |
| reg = <0x48020040 0x14>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| openisa,rv32m1-port = <&portb>; |
| }; |
| |
| gpioc: gpio@48020080 { |
| compatible = "openisa,rv32m1-gpio"; |
| reg = <0x48020080 0x14>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| openisa,rv32m1-port = <&portc>; |
| }; |
| |
| gpiod: gpio@480200c0 { |
| compatible = "openisa,rv32m1-gpio"; |
| reg = <0x480200c0 0x14>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| openisa,rv32m1-port = <&portd>; |
| }; |
| |
| gpioe: gpio@4100f000 { |
| compatible = "openisa,rv32m1-gpio"; |
| reg = <0x4100f000 0x14>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| clocks = <&pcc1 0x3c>; |
| openisa,rv32m1-port = <&porte>; |
| }; |
| |
| lpuart0: lpuart@40042000 { |
| compatible = "openisa,rv32m1-lpuart"; |
| reg = <0x40042000 0x2c>; |
| clocks = <&pcc0 0x108>; |
| status = "disabled"; |
| }; |
| |
| lpuart1: lpuart@40043000 { |
| compatible = "openisa,rv32m1-lpuart"; |
| reg = <0x40043000 0x2c>; |
| clocks = <&pcc0 0x10c>; |
| status = "disabled"; |
| }; |
| |
| lpuart2: lpuart@40044000 { |
| compatible = "openisa,rv32m1-lpuart"; |
| reg = <0x40044000 0x2c>; |
| clocks = <&pcc0 0x110>; |
| status = "disabled"; |
| }; |
| |
| lpuart3: lpuart@41036000 { |
| compatible = "openisa,rv32m1-lpuart"; |
| reg = <0x41036000 0x2c>; |
| clocks = <&pcc0 0xd8>; |
| status = "disabled"; |
| }; |
| |
| lpi2c0: lpi2c@4003a000 { |
| compatible = "openisa,rv32m1-lpi2c"; |
| reg = <0x4003a000 0x170>; |
| clocks = <&pcc0 0xe8>; |
| clock-frequency = <I2C_BITRATE_STANDARD>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| lpi2c1: lpi2c@4003b000 { |
| compatible = "openisa,rv32m1-lpi2c"; |
| reg = <0x4003b000 0x170>; |
| clocks = <&pcc0 0xec>; |
| clock-frequency = <I2C_BITRATE_STANDARD>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| lpi2c2: lpi2c@4003c000 { |
| compatible = "openisa,rv32m1-lpi2c"; |
| reg = <0x4003c000 0x170>; |
| clocks = <&pcc0 0xf0>; |
| clock-frequency = <I2C_BITRATE_STANDARD>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| lpi2c3: lpi2c@4102e000 { |
| compatible = "openisa,rv32m1-lpi2c"; |
| reg = <0x4102e000 0x170>; |
| clocks = <&pcc1 0xb8>; |
| clock-frequency = <I2C_BITRATE_STANDARD>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| lpspi0: spi@4003f000 { |
| compatible = "openisa,rv32m1-lpspi"; |
| reg = <0x4003f000 0x78>; |
| status = "disabled"; |
| clocks = <&pcc0 0xfc>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| lpspi1: spi@40040000 { |
| compatible = "openisa,rv32m1-lpspi"; |
| reg = <0x40040000 0x78>; |
| status = "disabled"; |
| clocks = <&pcc0 0x100>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| lpspi2: spi@40041000 { |
| compatible = "openisa,rv32m1-lpspi"; |
| reg = <0x40041000 0x78>; |
| status = "disabled"; |
| clocks = <&pcc0 0x104>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| lpspi3: spi@41035000 { |
| compatible = "openisa,rv32m1-lpspi"; |
| reg = <0x41035000 0x78>; |
| status = "disabled"; |
| clocks = <&pcc1 0xd4>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| generic_fsk: generic_fsk@41033000 { |
| compatible = "openisa,rv32m1-genfsk"; |
| reg = <0x41033000 0x90>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| tpm0: pwm@40035000 { |
| compatible = "openisa,rv32m1-tpm"; |
| reg = <0x40035000 0x88>; |
| clocks = <&pcc0 0xd4>; |
| status = "disabled"; |
| #pwm-cells = <3>; |
| }; |
| |
| tpm1: pwm@40036000 { |
| compatible = "openisa,rv32m1-tpm"; |
| reg = <0x40036000 0x88>; |
| clocks = <&pcc0 0xd8>; |
| status = "disabled"; |
| #pwm-cells = <3>; |
| }; |
| |
| tpm2: pwm@40037000 { |
| compatible = "openisa,rv32m1-tpm"; |
| reg = <0x40037000 0x88>; |
| clocks = <&pcc0 0xdc>; |
| status = "disabled"; |
| #pwm-cells = <3>; |
| }; |
| |
| trng: random@41029000{ |
| compatible = "openisa,rv32m1-trng"; |
| reg = <0x41029000 0x1000>; |
| status = "okay"; |
| interrupts = <13 0>; |
| }; |
| |
| tpm3: pwm@4102d000 { |
| compatible = "openisa,rv32m1-tpm"; |
| reg = <0x4102d000 0x88>; |
| clocks = <&pcc1 0xb4>; |
| status = "disabled"; |
| #pwm-cells = <3>; |
| }; |
| |
| ftfe: flash-controller@40023000 { |
| compatible = "openisa,rv32m1-ftfe"; |
| reg = <0x40023000 0x18>; |
| |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| m4_flash: flash@0 { |
| compatible = "soc-nv-flash"; |
| reg = <0 0x100000>; |
| erase-block-size = <4096>; |
| write-block-size = <8>; |
| }; |
| |
| m0_flash: flash@1000000 { |
| compatible = "soc-nv-flash"; |
| reg = <0x01000000 0x40000>; |
| erase-block-size = <4096>; |
| write-block-size = <8>; |
| }; |
| }; |
| }; |
| }; |
