blob: 954d903aa05b754981704339094d85131ef7e918 [file] [log] [blame]
.. _application:
Application Development
#######################
.. note::
In this document, we'll assume your **application directory** is
:file:`<home>/app`, and that its **build directory** is
:file:`<home>/app/build`.
(These terms are defined in the following Overview.)
On Linux/macOS, <home> is equivalent to ``~``, whereas on Windows it's
``%userprofile%``.
Overview
********
Zephyr's build system is based on `CMake`_.
The build system is application-centric, and requires Zephyr-based applications
to initiate building the kernel source tree. The application build controls
the configuration and build process of both the application and Zephyr itself,
compiling them into a single binary.
Zephyr's base directory hosts Zephyr's own source code, its kernel
configuration options, and its build definitions.
The files in the **application directory** link Zephyr with the
application. This directory contains all application-specific files, such as
configuration options and source code.
An application in its simplest form has the following contents:
.. code-block:: none
<home>/app
├── CMakeLists.txt
├── prj.conf
└── src
└── main.c
These contents are:
* **CMakeLists.txt**: This file tells the build system where to find the other
application files, and links the application directory with Zephyr's CMake
build system. This link provides features supported by Zephyr's build system,
such as board-specific kernel configuration files, the ability to run and
debug compiled binaries on real or emulated hardware, and more.
* **Kernel configuration files**: An application typically provides a
Kconfig configuration file (usually called :file:`prj.conf`) that specifies
application-specific values for one or more kernel configuration options.
These application settings are merged with board-specific settings to produce
a kernel configuration.
See :ref:`application-kconfig` below for more information.
* **Application source code files**: An application typically provides one
or more application-specific files, written in C or assembly language. These
files are usually located in a sub-directory called :file:`src`.
Once an application has been defined, you can use CMake to create project files
for building it from a directory where you want to host these files. This is
known as the **build directory**. Application build artifacts are always
generated in a build directory; Zephyr does not support "in-tree" builds.
The following sections describe how to create, build, and run Zephyr
applications, followed by more detailed reference material.
.. _zephyr-app-types:
Application types
*****************
Based on where the source code of the application is located we can distinguish
between three basic application types.
* Zephyr repository application
* Zephyr workspace application
* Zephyr freestanding application
You can find out more about how the build system supports all the application
types described in this section in the :ref:`cmake_pkg` section.
.. _zephyr-repo-app:
Zephyr repository application
=============================
An application located within the ``zephyr`` folder in a Zephyr :ref:`west
workspace <west-workspaces>` is referred to as a Zephyr repository application.
In the following example, the :ref:`hello_world sample <hello_world>` is a
Zephyr repository application:
.. code-block:: none
zephyrproject/
├─── .west/
│ └─── config
└─── zephyr/
├── arch/
├── boards/
├── cmake/
├── samples/
│ ├── hello_world/
│ └── ...
├── tests/
└── ...
.. _zephyr-workspace-app:
Zephyr workspace application
============================
An application located within a :ref:`workspace <west-workspaces>`, but outside
the Zephyr repository (and thus folder) itself, is referred to as a Zephyr
workspace application. In the following example, ``app`` is a Zephyr workspace
application:
.. code-block:: none
zephyrproject/
├─── .west/
│ └─── config
├─── zephyr/
├─── bootloader/
├─── modules/
├─── tools/
├─── <vendor/private-repositories>/
└─── applications/
└── app/
.. _zephyr-freestanding-app:
Zephyr freestanding application
===============================
A Zephyr application located outside of a Zephyr :ref:`workspace
<west-workspaces>` is referred to as a Zephyr freestanding application. In the
following example, ``app`` is a Zephyr freestanding application:
.. code-block:: none
<home>/
├─── zephyrproject/
│ ├─── .west/
│ │ └─── config
│ ├── zephyr/
│ ├── bootloader/
│ ├── modules/
│ └── ...
└─── app/
├── CMakeLists.txt
├── prj.conf
└── src/
└── main.c
Example workspace application
******************************
A reference :ref:`workspace application <zephyr-workspace-app>` contained in its
own Git repository can be found in the `Example Application`_ repository.
It can be used as a reference on how to structure out-of-tree, Zephyr-based workspace applications
using the :ref:`T2 star topology <west-t2>`. It also demonstrates the out-of-tree
use of features commonly used in applications such as:
- Custom boards
- Custom devicetree bindings
- Custom drivers
- Continuous Integration (CI) setup
- An example west :ref:`extension <west-extensions>` command
Creating an Application
***********************
Follow these steps to create a new application directory. (Refer to
the `Example Application`_ repository for a reference standalone application in its own Git repository
or to :ref:`samples-and-demos` for existing applications provided as part of
Zephyr.)
#. Create an application directory on your workstation computer, outside of the
Zephyr base directory. Usually you'll want to create it somewhere under
your user's home directory.
For example, in a Unix shell or Windows ``cmd.exe`` prompt, navigate to
where you want to create your application, then enter:
.. code-block:: console
mkdir app
.. warning::
Building Zephyr or creating an application in a directory with spaces
anywhere on the path is not supported. So the Windows path
:file:`C:\\Users\\YourName\\app` will work, but :file:`C:\\Users\\Your
Name\\app` will not.
#. It's recommended to place all application source code in a subdirectory
named :file:`src`. This makes it easier to distinguish between project
files and sources.
Continuing the previous example, enter:
.. code-block:: console
cd app
mkdir src
#. Place your application source code in the :file:`src` sub-directory. For
this example, we'll assume you created a file named :file:`src/main.c`.
#. Create a file named :file:`CMakeLists.txt` in the ``app`` directory with the
following contents:
.. code-block:: cmake
cmake_minimum_required(VERSION 3.20.0)
find_package(Zephyr)
project(my_zephyr_app)
target_sources(app PRIVATE src/main.c)
``cmake_minimum_required()`` is required to be in your
:file:`CMakeLists.txt` by CMake. It is also invoked by the Zephyr
package. The most recent of the two versions will be enforced by CMake.
``find_package(Zephyr)`` pulls in the Zephyr build system, which creates a
CMake target named ``app`` (see :ref:`cmake_pkg`). Adding sources to this
target is how you include them in the build. The Zephyr package will define
``Zephyr-Kernel`` as a CMake project and enable support for the ``C``,
``CXX``, ``ASM`` languages.
``project(my_zephyr_app)`` is required for defining your application
project. This must be called after ``find_package(Zephyr)`` to avoid
interference with Zephyr's ``project(Zephyr-Kernel)``.
``target_sources(app PRIVATE src/main.c)`` is to add your source file to the
``app`` target. This must come after ``find_package(Zephyr)`` which defines
the target.
#. Set Kconfig configuration options. See :ref:`application-kconfig`.
#. Configure any devicetree overlays needed by your application.
See :ref:`set-devicetree-overlays`.
.. note::
``include($ENV{ZEPHYR_BASE}/cmake/app/boilerplate.cmake NO_POLICY_SCOPE)``
is still supported for backward compatibility with older applications.
Including ``boilerplate.cmake`` directly in the sample still requires using
:ref:`zephyr-env` before building the application.
.. _important-build-vars:
Important Build System Variables
********************************
You can control the Zephyr build system using many variables. This
section describes the most important ones that every Zephyr developer
should know about.
.. note::
The variables :makevar:`BOARD`, :makevar:`CONF_FILE`, and
:makevar:`DTC_OVERLAY_FILE` can be supplied to the build system in
3 ways (in order of precedence):
* As a parameter to the ``west build`` or ``cmake`` invocation via the
``-D`` command-line switch. If you have multiple overlay files, you should
use quotations, ``"file1.overlay;file2.overlay"``
* As :ref:`env_vars`.
* As a ``set(<VARIABLE> <VALUE>)`` statement in your :file:`CMakeLists.txt`
* :makevar:`ZEPHYR_BASE`: Zephyr base variable used by the build system.
``find_package(Zephyr)`` will automatically set this as a cached CMake
variable. But ``ZEPHYR_BASE`` can also be set as an environment variable in
order to force CMake to use a specific Zephyr installation.
* :makevar:`BOARD`: Selects the board that the application's build
will use for the default configuration. See :ref:`boards` for
built-in boards, and :ref:`board_porting_guide` for information on
adding board support.
* :makevar:`CONF_FILE`: Indicates the name of one or more Kconfig configuration
fragment files. Multiple filenames can be separated with either spaces or
semicolons. Each file includes Kconfig configuration values that override
the default configuration values.
See :ref:`initial-conf` for more information.
* :makevar:`OVERLAY_CONFIG`: Additional Kconfig configuration fragment files.
Multiple filenames can be separated with either spaces or semicolons. This
can be useful in order to leave :makevar:`CONF_FILE` at its default value,
but "mix in" some additional configuration options.
* :makevar:`DTC_OVERLAY_FILE`: One or more devicetree overlay files to use.
Multiple files can be separated with semicolons.
See :ref:`set-devicetree-overlays` for examples and :ref:`devicetree-intro`
for information about devicetree and Zephyr.
* :makevar:`SHIELD`: see :ref:`shields`
* :makevar:`ZEPHYR_MODULES`: A CMake list containing absolute paths of
additional directories with source code, Kconfig, etc. that should be used in
the application build. See :ref:`modules` for details. If you set this
variable, it must be a complete list of all modules to use, as the build
system will not automatically pick up any modules from west.
* :makevar:`ZEPHYR_EXTRA_MODULES`: Like :makevar:`ZEPHYR_MODULES`, except these
will be added to the list of modules found via west, instead of replacing it.
.. note::
You can use a :ref:`cmake_build_config_package` to share common settings for
these variables.
Application CMakeLists.txt
**************************
Every application must have a :file:`CMakeLists.txt` file. This file is the
entry point, or top level, of the build system. The final :file:`zephyr.elf`
image contains both the application and the kernel libraries.
This section describes some of what you can do in your :file:`CMakeLists.txt`.
Make sure to follow these steps in order.
#. If you only want to build for one board, add the name of the board
configuration for your application on a new line. For example:
.. code-block:: cmake
set(BOARD qemu_x86)
Refer to :ref:`boards` for more information on available boards.
The Zephyr build system determines a value for :makevar:`BOARD` by checking
the following, in order (when a BOARD value is found, CMake stops looking
further down the list):
- Any previously used value as determined by the CMake cache takes highest
precedence. This ensures you don't try to run a build with a different
:makevar:`BOARD` value than you set during the build configuration step.
- Any value given on the CMake command line (directly or indirectly via
``west build``) using ``-DBOARD=YOUR_BOARD`` will be checked for and
used next.
- If an :ref:`environment variable <env_vars>` ``BOARD`` is set, its value
will then be used.
- Finally, if you set ``BOARD`` in your application :file:`CMakeLists.txt`
as described in this step, this value will be used.
#. If your application uses a configuration file or files other than
the usual :file:`prj.conf` (or :file:`prj_YOUR_BOARD.conf`, where
``YOUR_BOARD`` is a board name), add lines setting the
:makevar:`CONF_FILE` variable to these files appropriately.
If multiple filenames are given, separate them by a single space or
semicolon. CMake lists can be used to build up configuration fragment
files in a modular way when you want to avoid setting :makevar:`CONF_FILE`
in a single place. For example:
.. code-block:: cmake
set(CONF_FILE "fragment_file1.conf")
list(APPEND CONF_FILE "fragment_file2.conf")
See :ref:`initial-conf` for more information.
#. If your application uses devicetree overlays, you may need to set
:ref:`DTC_OVERLAY_FILE <important-build-vars>`.
See :ref:`set-devicetree-overlays`.
#. If your application has its own kernel configuration options,
create a :file:`Kconfig` file in the same directory as your
application's :file:`CMakeLists.txt`.
See :ref:`the Kconfig section of the manual <kconfig>` for detailed
Kconfig documentation.
An (unlikely) advanced use case would be if your application has its own
unique configuration **options** that are set differently depending on the
build configuration.
If you just want to set application specific **values** for existing Zephyr
configuration options, refer to the :makevar:`CONF_FILE` description above.
Structure your :file:`Kconfig` file like this:
.. literalinclude:: application-kconfig.include
.. note::
Environment variables in ``source`` statements are expanded directly, so
you do not need to define an ``option env="ZEPHYR_BASE"`` Kconfig
"bounce" symbol. If you use such a symbol, it must have the same name as
the environment variable.
See :ref:`kconfig_extensions` for more information.
The :file:`Kconfig` file is automatically detected when placed in
the application directory, but it is also possible for it to be
found elsewhere if the CMake variable :makevar:`KCONFIG_ROOT` is
set with an absolute path.
#. Specify that the application requires Zephyr on a new line, **after any
lines added from the steps above**:
.. code-block:: cmake
find_package(Zephyr)
project(my_zephyr_app)
.. note:: ``find_package(Zephyr REQUIRED HINTS $ENV{ZEPHYR_BASE})`` can be used if
enforcing a specific Zephyr installation by explicitly
setting the ``ZEPHYR_BASE`` environment variable should be
supported. All samples in Zephyr supports the ``ZEPHYR_BASE``
environment variable.
#. Now add any application source files to the 'app' target
library, each on their own line, like so:
.. code-block:: cmake
target_sources(app PRIVATE src/main.c)
Below is a simple example :file:`CMakeList.txt`:
.. code-block:: cmake
set(BOARD qemu_x86)
find_package(Zephyr)
project(my_zephyr_app)
target_sources(app PRIVATE src/main.c)
The Cmake property ``HEX_FILES_TO_MERGE``
leverages the application configuration provided by
Kconfig and CMake to let you merge externally built hex files
with the hex file generated when building the Zephyr application.
For example:
.. code-block:: cmake
set_property(GLOBAL APPEND PROPERTY HEX_FILES_TO_MERGE
${app_bootloader_hex}
${PROJECT_BINARY_DIR}/${KERNEL_HEX_NAME}
${app_provision_hex})
CMakeCache.txt
**************
CMake uses a CMakeCache.txt file as persistent key/value string
storage used to cache values between runs, including compile and build
options and paths to library dependencies. This cache file is created
when CMake is run in an empty build folder.
For more details about the CMakeCache.txt file see the official CMake
documentation `runningcmake`_ .
.. _runningcmake: http://cmake.org/runningcmake/
Application Configuration
*************************
.. _application-configuration-directory:
Application Configuration Directory
===================================
Zephyr will use configuration files from the application's configuration
directory except for files with an absolute path provided by the arguments
described earlier, for example ``CONF_FILE``, ``OVERLAY_CONFIG``, and
``DTC_OVERLAY_FILE``.
The application configuration directory is defined by the
``APPLICATION_CONFIG_DIR`` variable.
``APPLICATION_CONFIG_DIR`` will be set by one of the sources below with the
highest priority listed first.
1. If ``APPLICATION_CONFIG_DIR`` is specified by the user with
``-DAPPLICATION_CONFIG_DIR=<path>`` or in a CMake file before
``find_package(Zephyr)`` then this folder is used a the application's
configuration directory.
2. The application's source directory.
.. _application-kconfig:
Kconfig Configuration
=====================
Application configuration options are usually set in :file:`prj.conf` in the
application directory. For example, C++ support could be enabled with this
assignment:
.. code-block:: none
CONFIG_CPLUSPLUS=y
Looking at :ref:`existing samples <samples-and-demos>` is a good way to get
started.
See :ref:`setting_configuration_values` for detailed documentation on setting
Kconfig configuration values. The :ref:`initial-conf` section on the same page
explains how the initial configuration is derived. See :ref:`kconfig-search`
for a complete list of configuration options.
See :ref:`hardening` for security information related with Kconfig options.
The other pages in the :ref:`Kconfig section of the manual <kconfig>` are also
worth going through, especially if you planning to add new configuration
options.
Experimental features
*********************
Zephyr is a project under constant development and thus there are features that
are still in early stages of their development cycle. Such features will be
marked ``[EXPERIMENTAL]`` in their Kconfig title.
The :kconfig:option:`CONFIG_WARN_EXPERIMENTAL` setting can be used to enable warnings
at CMake configure time if any experimental feature is enabled.
.. code-block:: none
CONFIG_WARN_EXPERIMENTAL=y
For example, if option ``CONFIG_FOO`` is experimental, then enabling it and
:kconfig:option:`CONFIG_WARN_EXPERIMENTAL` will print the following warning at
CMake configure time when you build an application:
.. code-block:: none
warning: Experimental symbol FOO is enabled.
Devicetree Overlays
===================
See :ref:`set-devicetree-overlays`.
Application-Specific Code
*************************
Application-specific source code files are normally added to the
application's :file:`src` directory. If the application adds a large
number of files the developer can group them into sub-directories
under :file:`src`, to whatever depth is needed.
Application-specific source code should not use symbol name prefixes that have
been reserved by the kernel for its own use. For more information, see `Naming
Conventions
<https://github.com/zephyrproject-rtos/zephyr/wiki/Naming-Conventions>`_.
Third-party Library Code
========================
It is possible to build library code outside the application's :file:`src`
directory but it is important that both application and library code targets
the same Application Binary Interface (ABI). On most architectures there are
compiler flags that control the ABI targeted, making it important that both
libraries and applications have certain compiler flags in common. It may also
be useful for glue code to have access to Zephyr kernel header files.
To make it easier to integrate third-party components, the Zephyr
build system has defined CMake functions that give application build
scripts access to the zephyr compiler options. The functions are
documented and defined in :zephyr_file:`cmake/extensions.cmake`
and follow the naming convention ``zephyr_get_<type>_<format>``.
The following variables will often need to be exported to the
third-party build system.
* ``CMAKE_C_COMPILER``, ``CMAKE_AR``.
* ``ARCH`` and ``BOARD``, together with several variables that identify the
Zephyr kernel version.
:zephyr_file:`samples/application_development/external_lib` is a sample
project that demonstrates some of these features.
.. _build_an_application:
Building an Application
***********************
The Zephyr build system compiles and links all components of an application
into a single application image that can be run on simulated hardware or real
hardware.
Like any other CMake-based system, the build process takes place :ref:`in
two stages <cmake-details>`. First, build files (also known as a buildsystem)
are generated using the ``cmake`` command-line tool while specifying a
generator. This generator determines the native build tool the buildsystem
will use in the second stage.
The second stage runs the native build tool to actually build the
source files and generate an image. To learn more about these concepts refer to
the `CMake introduction`_ in the official CMake documentation.
Although the default build tool in Zephyr is :std:ref:`west <west>`, Zephyr's
meta-tool, which invokes ``cmake`` and the underlying build tool (``ninja`` or
``make``) behind the scenes, you can also choose to invoke ``cmake`` directly if
you prefer. On Linux and macOS you can choose between the ``make`` and
``ninja``
generators (i.e. build tools), whereas on Windows you need to use ``ninja``,
since ``make`` is not supported on this platform.
For simplicity we will use ``ninja`` throughout this guide, and if you
choose to use ``west build`` to build your application know that it will
default to ``ninja`` under the hood.
As an example, let's build the Hello World sample for the ``reel_board``:
.. zephyr-app-commands::
:tool: all
:app: samples/hello_world
:board: reel_board
:goals: build
On Linux and macOS, you can also build with ``make`` instead of ``ninja``:
Using west:
- to use ``make`` just once, add ``-- -G"Unix Makefiles"`` to the west build
command line; see the :ref:`west build <west-building-generator>`
documentation for an example.
- to use ``make`` by default from now on, run ``west config build.generator
"Unix Makefiles"``.
Using CMake directly:
.. zephyr-app-commands::
:tool: cmake
:app: samples/hello_world
:generator: make
:host-os: unix
:board: reel_board
:goals: build
Basics
======
.. note::
In the below example, ``west`` is used outside of a west workspace. For this
to work, you must set the ``ZEPHYR_BASE`` environment variable to the path
of your zephyr git repository, using one of the methods on the
:ref:`Environment Variables <env_vars>` page.
#. Navigate to the application directory :file:`<home>/app`.
#. Enter the following commands to build the application's :file:`zephyr.elf`
image for the board specified in the command-line parameters:
.. zephyr-app-commands::
:tool: all
:cd-into:
:board: <board>
:goals: build
If desired, you can build the application using the configuration settings
specified in an alternate :file:`.conf` file using the :code:`CONF_FILE`
parameter. These settings will override the settings in the application's
:file:`.config` file or its default :file:`.conf` file. For example:
.. zephyr-app-commands::
:tool: all
:cd-into:
:board: <board>
:gen-args: -DCONF_FILE=prj.alternate.conf
:goals: build
:compact:
As described in the previous section, you can instead choose to permanently
set the board and configuration settings by either exporting :makevar:`BOARD`
and :makevar:`CONF_FILE` environment variables or by setting their values
in your :file:`CMakeLists.txt` using ``set()`` statements.
Additionally, ``west`` allows you to :ref:`set a default board
<west-building-config>`.
.. _build-directory-contents:
Build Directory Contents
========================
When using the Ninja generator a build directory looks like this:
.. code-block:: none
<home>/app/build
├── build.ninja
├── CMakeCache.txt
├── CMakeFiles
├── cmake_install.cmake
├── rules.ninja
└── zephyr
The most notable files in the build directory are:
* :file:`build.ninja`, which can be invoked to build the application.
* A :file:`zephyr` directory, which is the working directory of the
generated build system, and where most generated files are created and
stored.
After running ``ninja``, the following build output files will be written to
the :file:`zephyr` sub-directory of the build directory. (This is **not the
Zephyr base directory**, which contains the Zephyr source code etc. and is
described above.)
* :file:`.config`, which contains the configuration settings
used to build the application.
.. note::
The previous version of :file:`.config` is saved to :file:`.config.old`
whenever the configuration is updated. This is for convenience, as
comparing the old and new versions can be handy.
* Various object files (:file:`.o` files and :file:`.a` files) containing
compiled kernel and application code.
* :file:`zephyr.elf`, which contains the final combined application and
kernel binary. Other binary output formats, such as :file:`.hex` and
:file:`.bin`, are also supported.
.. _application_rebuild:
Rebuilding an Application
=========================
Application development is usually fastest when changes are continually tested.
Frequently rebuilding your application makes debugging less painful
as the application becomes more complex. It's usually a good idea to
rebuild and test after any major changes to the application's source files,
CMakeLists.txt files, or configuration settings.
.. important::
The Zephyr build system rebuilds only the parts of the application image
potentially affected by the changes. Consequently, rebuilding an application
is often significantly faster than building it the first time.
Sometimes the build system doesn't rebuild the application correctly
because it fails to recompile one or more necessary files. You can force
the build system to rebuild the entire application from scratch with the
following procedure:
#. Open a terminal console on your host computer, and navigate to the
build directory :file:`<home>/app/build`.
#. Enter one of the following commands, depending on whether you want to use
``west`` or ``cmake`` directly to delete the application's generated
files, except for the :file:`.config` file that contains the
application's current configuration information.
.. code-block:: console
west build -t clean
or
.. code-block:: console
ninja clean
Alternatively, enter one of the following commands to delete *all*
generated files, including the :file:`.config` files that contain
the application's current configuration information for those board
types.
.. code-block:: console
west build -t pristine
or
.. code-block:: console
ninja pristine
If you use west, you can take advantage of its capability to automatically
:ref:`make the build folder pristine <west-building-config>` whenever it is
required.
#. Rebuild the application normally following the steps specified
in :ref:`build_an_application` above.
.. _application_board_version:
Building for a board revision
=============================
The Zephyr build system has support for specifying multiple hardware revisions
of a single board with small variations. Using revisions allows the board
support files to make minor adjustments to a board configuration without
duplicating all the files described in :ref:`create-your-board-directory` for
each revision.
To build for a particular revision, use ``<board>@<revision>`` instead of plain
``<board>``. For example:
.. zephyr-app-commands::
:tool: all
:cd-into:
:board: <board>@<revision>
:goals: build
:compact:
Check your board's documentation for details on whether it has multiple
revisions, and what revisions are supported.
When targeting a board revision, the active revision will be printed at CMake
configure time, like this:
.. code-block:: console
-- Board: plank, Revision: 1.5.0
.. _application_run:
Run an Application
******************
An application image can be run on a real board or emulated hardware.
.. _application_run_board:
Running on a Board
==================
Most boards supported by Zephyr let you flash a compiled binary using
the ``flash`` target to copy the binary to the board and run it.
Follow these instructions to flash and run an application on real
hardware:
#. Build your application, as described in :ref:`build_an_application`.
#. Make sure your board is attached to your host computer. Usually, you'll do
this via USB.
#. Run one of these console commands from the build directory,
:file:`<home>/app/build`, to flash the compiled Zephyr image and run it on
your board:
.. code-block:: console
west flash
or
.. code-block:: console
ninja flash
The Zephyr build system integrates with the board support files to
use hardware-specific tools to flash the Zephyr binary to your
hardware, then run it.
Each time you run the flash command, your application is rebuilt and flashed
again.
In cases where board support is incomplete, flashing via the Zephyr build
system may not be supported. If you receive an error message about flash
support being unavailable, consult :ref:`your board's documentation <boards>`
for additional information on how to flash your board.
.. note:: When developing on Linux, it's common to need to install
board-specific udev rules to enable USB device access to
your board as a non-root user. If flashing fails,
consult your board's documentation to see if this is
necessary.
.. _application_run_qemu:
Running in an Emulator
======================
The kernel has built-in emulator support for QEMU (on Linux/macOS only, this
is not yet supported on Windows). It allows you to run and test an application
virtually, before (or in lieu of) loading and running it on actual target
hardware. Follow these instructions to run an application via QEMU:
#. Build your application for one of the QEMU boards, as described in
:ref:`build_an_application`.
For example, you could set ``BOARD`` to:
- ``qemu_x86`` to emulate running on an x86-based board
- ``qemu_cortex_m3`` to emulate running on an ARM Cortex M3-based board
#. Run one of these console commands from the build directory,
:file:`<home>/app/build`, to run the Zephyr binary in QEMU:
.. code-block:: console
west build -t run
or
.. code-block:: console
ninja run
#. Press :kbd:`Ctrl A, X` to stop the application from running
in QEMU.
The application stops running and the terminal console prompt
redisplays.
Each time you execute the run command, your application is rebuilt and run
again.
.. note::
If the (Linux only) :ref:`Zephyr SDK <toolchain_zephyr_sdk>` is installed, the ``run``
target will use the SDK's QEMU binary by default. To use another version of
QEMU, :ref:`set the environment variable <env_vars>` ``QEMU_BIN_PATH``
to the path of the QEMU binary you want to use instead.
.. note::
You can choose a specific emulator by appending ``_<emulator>`` to your
target name, for example ``west build -t run_qemu`` or ``ninja run_qemu``
for QEMU.
.. _application_debugging:
Application Debugging
*********************
This section is a quick hands-on reference to start debugging your
application with QEMU. Most content in this section is already covered in
`QEMU`_ and `GNU_Debugger`_ reference manuals.
.. _QEMU: http://wiki.qemu.org/Main_Page
.. _GNU_Debugger: http://www.gnu.org/software/gdb
In this quick reference, you'll find shortcuts, specific environmental
variables, and parameters that can help you to quickly set up your debugging
environment.
The simplest way to debug an application running in QEMU is using the GNU
Debugger and setting a local GDB server in your development system through QEMU.
You will need an Executable and Linkable Format (ELF) binary image for
debugging purposes. The build system generates the image in the build
directory. By default, the kernel binary name is
:file:`zephyr.elf`. The name can be changed using a Kconfig option.
We will use the standard 1234 TCP port to open a :abbr:`GDB (GNU Debugger)`
server instance. This port number can be changed for a port that best suits the
development environment.
You can run QEMU to listen for a "gdb connection" before it starts executing any
code to debug it.
.. code-block:: bash
qemu -s -S <image>
will setup Qemu to listen on port 1234 and wait for a GDB connection to it.
The options used above have the following meaning:
* ``-S`` Do not start CPU at startup; rather, you must type 'c' in the
monitor.
* ``-s`` Shorthand for :literal:`-gdb tcp::1234`: open a GDB server on
TCP port 1234.
To debug with QEMU and to start a GDB server and wait for a remote connect, run
either of the following inside the build directory of an application:
.. code-block:: bash
ninja debugserver
The build system will start a QEMU instance with the CPU halted at startup
and with a GDB server instance listening at the TCP port 1234.
Using a local GDB configuration :file:`.gdbinit` can help initialize your GDB
instance on every run.
In this example, the initialization file points to the GDB server instance.
It configures a connection to a remote target at the local host on the TCP
port 1234. The initialization sets the kernel's root directory as a
reference.
The :file:`.gdbinit` file contains the following lines:
.. code-block:: bash
target remote localhost:1234
dir ZEPHYR_BASE
.. note::
Substitute the correct :ref:`ZEPHYR_BASE <important-build-vars>` for your
system.
Execute the application to debug from the same directory that you chose for
the :file:`gdbinit` file. The command can include the ``--tui`` option
to enable the use of a terminal user interface. The following commands
connects to the GDB server using :file:`gdb`. The command loads the symbol
table from the elf binary file. In this example, the elf binary file name
corresponds to :file:`zephyr.elf` file:
.. code-block:: bash
..../path/to/gdb --tui zephyr.elf
.. note::
The GDB version on the development system might not support the --tui
option. Please make sure you use the GDB binary from the SDK which
corresponds to the toolchain that has been used to build the binary.
If you are not using a .gdbinit file, issue the following command inside GDB to
connect to the remote GDB server on port 1234:
.. code-block:: bash
(gdb) target remote localhost:1234
Finally, the command below connects to the GDB server using the Data
Displayer Debugger (:file:`ddd`). The command loads the symbol table from the
elf binary file, in this instance, the :file:`zephyr.elf` file.
The :abbr:`DDD (Data Displayer Debugger)` may not be installed in your
development system by default. Follow your system instructions to install
it. For example, use ``sudo apt-get install ddd`` on an Ubuntu system.
.. code-block:: bash
ddd --gdb --debugger "gdb zephyr.elf"
Both commands execute the :abbr:`gdb (GNU Debugger)`. The command name might
change depending on the toolchain you are using and your cross-development
tools.
.. _custom_board_definition:
Custom Board, Devicetree and SOC Definitions
********************************************
In cases where the board or platform you are developing for is not yet
supported by Zephyr, you can add board, Devicetree and SOC definitions
to your application without having to add them to the Zephyr tree.
The structure needed to support out-of-tree board and SOC development
is similar to how boards and SOCs are maintained in the Zephyr tree. By using
this structure, it will be much easier to upstream your platform related work into
the Zephyr tree after your initial development is done.
Add the custom board to your application or a dedicated repository using the
following structure:
.. code-block:: console
boards/
soc/
CMakeLists.txt
prj.conf
README.rst
src/
where the ``boards`` directory hosts the board you are building for:
.. code-block:: console
.
├── boards
│ └── x86
│ └── my_custom_board
│ ├── doc
│ │ └── img
│ └── support
└── src
and the ``soc`` directory hosts any SOC code. You can also have boards that are
supported by a SOC that is available in the Zephyr tree.
Boards
======
Use the proper architecture folder name (e.g., ``x86``, ``arm``, etc.)
under ``boards`` for ``my_custom_board``. (See :ref:`boards` for a
list of board architectures.)
Documentation (under ``doc/``) and support files (under ``support/``) are optional, but
will be needed when submitting to Zephyr.
The contents of ``my_custom_board`` should follow the same guidelines for any
Zephyr board, and provide the following files::
my_custom_board_defconfig
my_custom_board.dts
my_custom_board.yaml
board.cmake
board.h
CMakeLists.txt
doc/
Kconfig.board
Kconfig.defconfig
pinmux.c
support/
Once the board structure is in place, you can build your application
targeting this board by specifying the location of your custom board
information with the ``-DBOARD_ROOT`` parameter to the CMake
build system:
.. zephyr-app-commands::
:tool: all
:board: <board name>
:gen-args: -DBOARD_ROOT=<path to boards>
:goals: build
:compact:
This will use your custom board configuration and will generate the
Zephyr binary into your application directory.
You can also define the ``BOARD_ROOT`` variable in the application
:file:`CMakeLists.txt` file. Make sure to do so **before** pulling in the Zephyr
boilerplate with ``find_package(Zephyr ...)``.
.. note::
When specifying ``BOARD_ROOT`` in a CMakeLists.txt, then an absolute path must
be provided, for example ``list(APPEND BOARD_ROOT ${CMAKE_CURRENT_SOURCE_DIR}/<extra-board-root>)``.
When using ``-DBOARD_ROOT=<board-root>`` both absolute and relative paths can
be used. Relative paths are treated relatively to the application directory.
SOC Definitions
===============
Similar to board support, the structure is similar to how SOCs are maintained in
the Zephyr tree, for example:
.. code-block:: none
soc
└── arm
└── st_stm32
├── common
└── stm32l0
The file :zephyr_file:`soc/Kconfig` will create the top-level
``SoC/CPU/Configuration Selection`` menu in Kconfig.
Out of tree SoC definitions can be added to this menu using the ``SOC_ROOT``
CMake variable. This variable contains a semicolon-separated list of directories
which contain SoC support files.
Following the structure above, the following files can be added to load
more SoCs into the menu.
.. code-block:: none
soc
└── arm
└── st_stm32
├── Kconfig
├── Kconfig.soc
└── Kconfig.defconfig
The Kconfig files above may describe the SoC or load additional SoC Kconfig files.
An example of loading ``stm31l0`` specific Kconfig files in this structure:
.. code-block:: none
soc
└── arm
└── st_stm32
├── Kconfig.soc
└── stm32l0
└── Kconfig.series
can be done with the following content in ``st_stm32/Kconfig.soc``:
.. code-block:: none
rsource "*/Kconfig.series"
Once the SOC structure is in place, you can build your application
targeting this platform by specifying the location of your custom platform
information with the ``-DSOC_ROOT`` parameter to the CMake
build system:
.. zephyr-app-commands::
:tool: all
:board: <board name>
:gen-args: -DSOC_ROOT=<path to soc> -DBOARD_ROOT=<path to boards>
:goals: build
:compact:
This will use your custom platform configurations and will generate the
Zephyr binary into your application directory.
See :ref:`modules_build_settings` for information on setting SOC_ROOT in a module's
:file:`zephyr/module.yml` file.
Or you can define the ``SOC_ROOT`` variable in the application
:file:`CMakeLists.txt` file. Make sure to do so **before** pulling in the
Zephyr boilerplate with ``find_package(Zephyr ...)``.
.. note::
When specifying ``SOC_ROOT`` in a CMakeLists.txt, then an absolute path must
be provided, for example ``list(APPEND SOC_ROOT ${CMAKE_CURRENT_SOURCE_DIR}/<extra-soc-root>``.
When using ``-DSOC_ROOT=<soc-root>`` both absolute and relative paths can be
used. Relative paths are treated relatively to the application directory.
.. _dts_root:
Devicetree Definitions
======================
Devicetree directory trees are found in ``APPLICATION_SOURCE_DIR``,
``BOARD_DIR``, and ``ZEPHYR_BASE``, but additional trees, or DTS_ROOTs,
can be added by creating this directory tree::
include/
dts/common/
dts/arm/
dts/
dts/bindings/
Where 'arm' is changed to the appropriate architecture. Each directory
is optional. The binding directory contains bindings and the other
directories contain files that can be included from DT sources.
Once the directory structure is in place, you can use it by specifying
its location through the ``DTS_ROOT`` CMake Cache variable:
.. zephyr-app-commands::
:tool: all
:board: <board name>
:gen-args: -DDTS_ROOT=<path to dts root>
:goals: build
:compact:
You can also define the variable in the application :file:`CMakeLists.txt`
file. Make sure to do so **before** pulling in the Zephyr boilerplate with
``find_package(Zephyr ...)``.
.. note::
When specifying ``DTS_ROOT`` in a CMakeLists.txt, then an absolute path must
be provided, for example ``list(APPEND DTS_ROOT ${CMAKE_CURRENT_SOURCE_DIR}/<extra-dts-root>``.
When using ``-DDTS_ROOT=<dts-root>`` both absolute and relative paths can be
used. Relative paths are treated relatively to the application directory.
Devicetree source are passed through the C preprocessor, so you can
include files that can be located in a ``DTS_ROOT`` directory. By
convention devicetree include files have a ``.dtsi`` extension.
You can also use the preprocessor to control the content of a devicetree
file, by specifying directives through the ``DTS_EXTRA_CPPFLAGS`` CMake
Cache variable:
.. zephyr-app-commands::
:tool: all
:board: <board name>
:gen-args: -DDTS_EXTRA_CPPFLAGS=-DTEST_ENABLE_FEATURE
:goals: build
:compact:
Debug with Eclipse
******************
Overview
========
CMake supports generating a project description file that can be imported into
the Eclipse Integrated Development Environment (IDE) and used for graphical
debugging.
The `GNU MCU Eclipse plug-ins`_ provide a mechanism to debug ARM projects in
Eclipse with pyOCD, Segger J-Link, and OpenOCD debugging tools.
The following tutorial demonstrates how to debug a Zephyr application in
Eclipse with pyOCD in Windows. It assumes you have already installed the GCC
ARM Embedded toolchain and pyOCD.
Set Up the Eclipse Development Environment
==========================================
#. Download and install `Eclipse IDE for C/C++ Developers`_.
#. In Eclipse, install the GNU MCU Eclipse plug-ins by opening the menu
``Window->Eclipse Marketplace...``, searching for ``GNU MCU Eclipse``, and
clicking ``Install`` on the matching result.
#. Configure the path to the pyOCD GDB server by opening the menu
``Window->Preferences``, navigating to ``MCU``, and setting the ``Global
pyOCD Path``.
Generate and Import an Eclipse Project
======================================
#. Set up a GNU Arm Embedded toolchain as described in
:ref:`toolchain_gnuarmemb`.
#. Navigate to a folder outside of the Zephyr tree to build your application.
.. code-block:: console
# On Windows
cd %userprofile%
.. note::
If the build directory is a subdirectory of the source directory, as is
usually done in Zephyr, CMake will warn:
"The build directory is a subdirectory of the source directory.
This is not supported well by Eclipse. It is strongly recommended to use
a build directory which is a sibling of the source directory."
#. Configure your application with CMake and build it with ninja. Note the
different CMake generator specified by the ``-G"Eclipse CDT4 - Ninja"``
argument. This will generate an Eclipse project description file,
:file:`.project`, in addition to the usual ninja build files.
.. zephyr-app-commands::
:tool: all
:app: %ZEPHYR_BASE%\samples\synchronization
:host-os: win
:board: frdm_k64f
:gen-args: -G"Eclipse CDT4 - Ninja"
:goals: build
:compact:
#. In Eclipse, import your generated project by opening the menu
``File->Import...`` and selecting the option ``Existing Projects into
Workspace``. Browse to your application build directory in the choice,
``Select root directory:``. Check the box for your project in the list of
projects found and click the ``Finish`` button.
Create a Debugger Configuration
===============================
#. Open the menu ``Run->Debug Configurations...``.
#. Select ``GDB PyOCD Debugging``, click the ``New`` button, and configure the
following options:
- In the Main tab:
- Project: ``my_zephyr_app@build``
- C/C++ Application: :file:`zephyr/zephyr.elf`
- In the Debugger tab:
- pyOCD Setup
- Executable path: :file:`${pyocd_path}\\${pyocd_executable}`
- Uncheck "Allocate console for semihosting"
- Board Setup
- Bus speed: 8000000 Hz
- Uncheck "Enable semihosting"
- GDB Client Setup
- Executable path example (use your ``GNUARMEMB_TOOLCHAIN_PATH``):
:file:`C:\\gcc-arm-none-eabi-6_2017-q2-update\\bin\\arm-none-eabi-gdb.exe`
- In the SVD Path tab:
- File path: :file:`<workspace
top>\\modules\\hal\\nxp\\mcux\\devices\\MK64F12\\MK64F12.xml`
.. note::
This is optional. It provides the SoC's memory-mapped register
addresses and bitfields to the debugger.
#. Click the ``Debug`` button to start debugging.
RTOS Awareness
==============
Support for Zephyr RTOS awareness is implemented in `pyOCD v0.11.0`_ and later.
It is compatible with GDB PyOCD Debugging in Eclipse, but you must enable
CONFIG_DEBUG_THREAD_INFO=y in your application.
.. _CMake: https://www.cmake.org
.. _CMake introduction: https://cmake.org/cmake/help/latest/manual/cmake.1.html#description
.. _Eclipse IDE for C/C++ Developers: https://www.eclipse.org/downloads/packages/eclipse-ide-cc-developers/oxygen2
.. _GNU MCU Eclipse plug-ins: https://gnu-mcu-eclipse.github.io/plugins/install/
.. _pyOCD v0.11.0: https://github.com/mbedmicro/pyOCD/releases/tag/v0.11.0
.. _CMake list: https://cmake.org/cmake/help/latest/manual/cmake-language.7.html#lists
.. _add_subdirectory(): https://cmake.org/cmake/help/latest/command/add_subdirectory.html
.. _using Chocolatey: https://chocolatey.org/packages/RapidEE
.. _Example Application: https://github.com/zephyrproject-rtos/example-application