| /* |
| * Copyright (c) 2022 Vestas Wind Systems A/S |
| * Copyright (c) 2020 Alexander Wachter |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <zephyr/sys/util.h> |
| #include <string.h> |
| #include <zephyr/cache.h> |
| #include <zephyr/kernel.h> |
| #include <zephyr/drivers/can.h> |
| #include <zephyr/drivers/can/transceiver.h> |
| #include <zephyr/logging/log.h> |
| |
| #include "can_mcan.h" |
| #include "can_mcan_priv.h" |
| |
| LOG_MODULE_REGISTER(can_mcan, CONFIG_CAN_LOG_LEVEL); |
| |
| #define CAN_INIT_TIMEOUT (100) |
| #define CAN_DIV_CEIL(val, div) (((val) + (div) - 1) / (div)) |
| |
| static void memcpy32_volatile(volatile void *dst_, const volatile void *src_, |
| size_t len) |
| { |
| volatile uint32_t *dst = dst_; |
| const volatile uint32_t *src = src_; |
| |
| __ASSERT(len % 4 == 0, "len must be a multiple of 4!"); |
| len /= sizeof(uint32_t); |
| |
| while (len--) { |
| *dst = *src; |
| ++dst; |
| ++src; |
| } |
| } |
| |
| static void memset32_volatile(volatile void *dst_, uint32_t val, size_t len) |
| { |
| volatile uint32_t *dst = dst_; |
| |
| __ASSERT(len % 4 == 0, "len must be a multiple of 4!"); |
| len /= sizeof(uint32_t); |
| |
| while (len--) { |
| *dst++ = val; |
| } |
| } |
| |
| static int can_exit_sleep_mode(struct can_mcan_reg *can) |
| { |
| uint32_t start_time; |
| |
| can->cccr &= ~CAN_MCAN_CCCR_CSR; |
| start_time = k_cycle_get_32(); |
| |
| while ((can->cccr & CAN_MCAN_CCCR_CSA) == CAN_MCAN_CCCR_CSA) { |
| if (k_cycle_get_32() - start_time > |
| k_ms_to_cyc_ceil32(CAN_INIT_TIMEOUT)) { |
| can->cccr |= CAN_MCAN_CCCR_CSR; |
| return -EAGAIN; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int can_enter_init_mode(struct can_mcan_reg *can, k_timeout_t timeout) |
| { |
| int64_t start_time; |
| |
| can->cccr |= CAN_MCAN_CCCR_INIT; |
| start_time = k_uptime_ticks(); |
| |
| while ((can->cccr & CAN_MCAN_CCCR_INIT) == 0U) { |
| if (k_uptime_ticks() - start_time > timeout.ticks) { |
| can->cccr &= ~CAN_MCAN_CCCR_INIT; |
| return -EAGAIN; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int can_leave_init_mode(struct can_mcan_reg *can, k_timeout_t timeout) |
| { |
| int64_t start_time; |
| |
| can->cccr &= ~CAN_MCAN_CCCR_INIT; |
| start_time = k_uptime_ticks(); |
| |
| while ((can->cccr & CAN_MCAN_CCCR_INIT) != 0U) { |
| if (k_uptime_ticks() - start_time > timeout.ticks) { |
| return -EAGAIN; |
| } |
| } |
| |
| return 0; |
| } |
| |
| void can_mcan_configure_timing(struct can_mcan_reg *can, |
| const struct can_timing *timing, |
| const struct can_timing *timing_data) |
| { |
| if (timing) { |
| uint32_t nbtp_sjw = can->nbtp & CAN_MCAN_NBTP_NSJW_MSK; |
| |
| __ASSERT_NO_MSG(timing->prop_seg == 0); |
| __ASSERT_NO_MSG(timing->phase_seg1 <= 0x100 && |
| timing->phase_seg1 > 0); |
| __ASSERT_NO_MSG(timing->phase_seg2 <= 0x80 && |
| timing->phase_seg2 > 0); |
| __ASSERT_NO_MSG(timing->prescaler <= 0x200 && |
| timing->prescaler > 0); |
| __ASSERT_NO_MSG(timing->sjw == CAN_SJW_NO_CHANGE || |
| (timing->sjw <= 0x80 && timing->sjw > 0)); |
| |
| can->nbtp = (((uint32_t)timing->phase_seg1 - 1UL) & 0xFF) << |
| CAN_MCAN_NBTP_NTSEG1_POS | |
| (((uint32_t)timing->phase_seg2 - 1UL) & 0x7F) << |
| CAN_MCAN_NBTP_NTSEG2_POS | |
| (((uint32_t)timing->prescaler - 1UL) & 0x1FF) << |
| CAN_MCAN_NBTP_NBRP_POS; |
| |
| if (timing->sjw == CAN_SJW_NO_CHANGE) { |
| can->nbtp |= nbtp_sjw; |
| } else { |
| can->nbtp |= (((uint32_t)timing->sjw - 1UL) & 0x7F) << |
| CAN_MCAN_NBTP_NSJW_POS; |
| } |
| } |
| |
| #ifdef CONFIG_CAN_FD_MODE |
| if (timing_data) { |
| uint32_t dbtp_sjw = can->dbtp & CAN_MCAN_DBTP_DSJW_MSK; |
| |
| __ASSERT_NO_MSG(timing_data->prop_seg == 0); |
| __ASSERT_NO_MSG(timing_data->phase_seg1 <= 0x20 && |
| timing_data->phase_seg1 > 0); |
| __ASSERT_NO_MSG(timing_data->phase_seg2 <= 0x10 && |
| timing_data->phase_seg2 > 0); |
| __ASSERT_NO_MSG(timing_data->prescaler <= 0x20 && |
| timing_data->prescaler > 0); |
| __ASSERT_NO_MSG(timing_data->sjw == CAN_SJW_NO_CHANGE || |
| (timing_data->sjw <= 0x80 && timing_data->sjw > 0)); |
| |
| can->dbtp = (((uint32_t)timing_data->phase_seg1 - 1UL) & 0x1F) << |
| CAN_MCAN_DBTP_DTSEG1_POS | |
| (((uint32_t)timing_data->phase_seg2 - 1UL) & 0x0F) << |
| CAN_MCAN_DBTP_DTSEG2_POS | |
| (((uint32_t)timing_data->prescaler - 1UL) & 0x1F) << |
| CAN_MCAN_DBTP_DBRP_POS; |
| |
| if (timing_data->sjw == CAN_SJW_NO_CHANGE) { |
| can->dbtp |= dbtp_sjw; |
| } else { |
| can->dbtp |= (((uint32_t)timing_data->sjw - 1UL) & 0x0F) << |
| CAN_MCAN_DBTP_DSJW_POS; |
| } |
| } |
| #endif |
| } |
| |
| int can_mcan_set_timing(const struct device *dev, |
| const struct can_timing *timing) |
| { |
| const struct can_mcan_config *cfg = dev->config; |
| struct can_mcan_data *data = dev->data; |
| struct can_mcan_reg *can = cfg->can; |
| |
| if (data->started) { |
| return -EBUSY; |
| } |
| |
| can_mcan_configure_timing(can, timing, NULL); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_CAN_FD_MODE |
| int can_mcan_set_timing_data(const struct device *dev, |
| const struct can_timing *timing_data) |
| { |
| const struct can_mcan_config *cfg = dev->config; |
| struct can_mcan_data *data = dev->data; |
| struct can_mcan_reg *can = cfg->can; |
| |
| if (data->started) { |
| return -EBUSY; |
| } |
| |
| can_mcan_configure_timing(can, NULL, timing_data); |
| |
| return 0; |
| } |
| #endif /* CONFIG_CAN_FD_MODE */ |
| |
| int can_mcan_get_capabilities(const struct device *dev, can_mode_t *cap) |
| { |
| ARG_UNUSED(dev); |
| |
| *cap = CAN_MODE_NORMAL | CAN_MODE_LOOPBACK | CAN_MODE_LISTENONLY; |
| |
| #if CONFIG_CAN_FD_MODE |
| *cap |= CAN_MODE_FD; |
| #endif /* CONFIG_CAN_FD_MODE */ |
| |
| return 0; |
| } |
| |
| int can_mcan_start(const struct device *dev) |
| { |
| const struct can_mcan_config *cfg = dev->config; |
| struct can_mcan_data *data = dev->data; |
| struct can_mcan_reg *can = cfg->can; |
| int ret; |
| |
| if (data->started) { |
| return -EALREADY; |
| } |
| |
| if (cfg->phy != NULL) { |
| ret = can_transceiver_enable(cfg->phy); |
| if (ret != 0) { |
| LOG_ERR("failed to enable CAN transceiver (err %d)", ret); |
| return ret; |
| } |
| } |
| |
| ret = can_leave_init_mode(can, K_MSEC(CAN_INIT_TIMEOUT)); |
| if (ret) { |
| LOG_ERR("failed to leave init mode"); |
| |
| if (cfg->phy != NULL) { |
| /* Attempt to disable the CAN transceiver in case of error */ |
| (void)can_transceiver_disable(cfg->phy); |
| } |
| |
| return -EIO; |
| } |
| |
| data->started = true; |
| |
| return 0; |
| } |
| |
| int can_mcan_stop(const struct device *dev) |
| { |
| const struct can_mcan_config *cfg = dev->config; |
| struct can_mcan_data *data = dev->data; |
| struct can_mcan_reg *can = cfg->can; |
| can_tx_callback_t tx_cb; |
| uint32_t tx_idx; |
| int ret; |
| |
| if (!data->started) { |
| return -EALREADY; |
| } |
| |
| /* CAN transmissions are automatically stopped when entering init mode */ |
| ret = can_enter_init_mode(can, K_MSEC(CAN_INIT_TIMEOUT)); |
| if (ret != 0) { |
| LOG_ERR("Failed to enter init mode"); |
| return -EIO; |
| } |
| |
| if (cfg->phy != NULL) { |
| ret = can_transceiver_disable(cfg->phy); |
| if (ret != 0) { |
| LOG_ERR("failed to disable CAN transceiver (err %d)", ret); |
| return ret; |
| } |
| } |
| |
| can_mcan_enable_configuration_change(dev); |
| |
| data->started = false; |
| |
| for (tx_idx = 0; tx_idx < ARRAY_SIZE(data->tx_fin_cb); tx_idx++) { |
| tx_cb = data->tx_fin_cb[tx_idx]; |
| |
| if (tx_cb != NULL) { |
| data->tx_fin_cb[tx_idx] = NULL; |
| tx_cb(dev, -ENETDOWN, data->tx_fin_cb_arg[tx_idx]); |
| k_sem_give(&data->tx_sem); |
| } |
| } |
| |
| return 0; |
| } |
| |
| int can_mcan_set_mode(const struct device *dev, can_mode_t mode) |
| { |
| const struct can_mcan_config *cfg = dev->config; |
| struct can_mcan_data *data = dev->data; |
| struct can_mcan_reg *can = cfg->can; |
| |
| #ifdef CONFIG_CAN_FD_MODE |
| if ((mode & ~(CAN_MODE_LOOPBACK | CAN_MODE_LISTENONLY | CAN_MODE_FD)) != 0) { |
| LOG_ERR("unsupported mode: 0x%08x", mode); |
| return -ENOTSUP; |
| } |
| #else |
| if ((mode & ~(CAN_MODE_LOOPBACK | CAN_MODE_LISTENONLY)) != 0) { |
| LOG_ERR("unsupported mode: 0x%08x", mode); |
| return -ENOTSUP; |
| } |
| #endif /* CONFIG_CAN_FD_MODE */ |
| |
| if (data->started) { |
| return -EBUSY; |
| } |
| |
| if ((mode & CAN_MODE_LOOPBACK) != 0) { |
| /* Loopback mode */ |
| can->cccr |= CAN_MCAN_CCCR_TEST; |
| can->test |= CAN_MCAN_TEST_LBCK; |
| } else { |
| can->cccr &= ~CAN_MCAN_CCCR_TEST; |
| } |
| |
| if ((mode & CAN_MODE_LISTENONLY) != 0) { |
| /* Bus monitoring mode */ |
| can->cccr |= CAN_MCAN_CCCR_MON; |
| } else { |
| can->cccr &= ~CAN_MCAN_CCCR_MON; |
| } |
| |
| #ifdef CONFIG_CAN_FD_MODE |
| if ((mode & CAN_MODE_FD) != 0) { |
| can->cccr |= CAN_MCAN_CCCR_FDOE | CAN_MCAN_CCCR_BRSE; |
| } else { |
| can->cccr &= ~(CAN_MCAN_CCCR_FDOE | CAN_MCAN_CCCR_BRSE); |
| } |
| #endif /* CONFIG_CAN_FD_MODE */ |
| |
| return 0; |
| } |
| |
| int can_mcan_init(const struct device *dev) |
| { |
| const struct can_mcan_config *cfg = dev->config; |
| struct can_mcan_data *data = dev->data; |
| struct can_mcan_reg *can = cfg->can; |
| struct can_mcan_msg_sram *msg_ram = data->msg_ram; |
| struct can_timing timing; |
| #ifdef CONFIG_CAN_FD_MODE |
| struct can_timing timing_data; |
| #endif |
| int ret; |
| |
| k_mutex_init(&data->inst_mutex); |
| k_mutex_init(&data->tx_mtx); |
| k_sem_init(&data->tx_sem, NUM_TX_BUF_ELEMENTS, NUM_TX_BUF_ELEMENTS); |
| |
| if (cfg->phy != NULL) { |
| if (!device_is_ready(cfg->phy)) { |
| LOG_ERR("CAN transceiver not ready"); |
| return -ENODEV; |
| } |
| } |
| |
| ret = can_exit_sleep_mode(can); |
| if (ret) { |
| LOG_ERR("Failed to exit sleep mode"); |
| return -EIO; |
| } |
| |
| ret = can_enter_init_mode(can, K_MSEC(CAN_INIT_TIMEOUT)); |
| if (ret) { |
| LOG_ERR("Failed to enter init mode"); |
| return -EIO; |
| } |
| |
| can_mcan_enable_configuration_change(dev); |
| |
| LOG_DBG("IP rel: %lu.%lu.%lu %02lu.%lu.%lu", |
| (can->crel & CAN_MCAN_CREL_REL) >> CAN_MCAN_CREL_REL_POS, |
| (can->crel & CAN_MCAN_CREL_STEP) >> CAN_MCAN_CREL_STEP_POS, |
| (can->crel & CAN_MCAN_CREL_SUBSTEP) >> |
| CAN_MCAN_CREL_SUBSTEP_POS, |
| (can->crel & CAN_MCAN_CREL_YEAR) >> CAN_MCAN_CREL_YEAR_POS, |
| (can->crel & CAN_MCAN_CREL_MON) >> CAN_MCAN_CREL_MON_POS, |
| (can->crel & CAN_MCAN_CREL_DAY) >> CAN_MCAN_CREL_DAY_POS); |
| |
| #ifndef CONFIG_CAN_STM32FD |
| uint32_t mrba = 0; |
| #ifdef CONFIG_CAN_STM32H7 |
| mrba = (uint32_t)msg_ram; |
| #endif |
| #ifdef CONFIG_CAN_MCUX_MCAN |
| mrba = (uint32_t)msg_ram & CAN_MCAN_MRBA_BA_MSK; |
| can->mrba = mrba; |
| #endif |
| can->sidfc = (((uint32_t)msg_ram->std_filt - mrba) & CAN_MCAN_SIDFC_FLSSA_MSK) | |
| (ARRAY_SIZE(msg_ram->std_filt) << CAN_MCAN_SIDFC_LSS_POS); |
| can->xidfc = (((uint32_t)msg_ram->ext_filt - mrba) & CAN_MCAN_XIDFC_FLESA_MSK) | |
| (ARRAY_SIZE(msg_ram->ext_filt) << CAN_MCAN_XIDFC_LSS_POS); |
| can->rxf0c = (((uint32_t)msg_ram->rx_fifo0 - mrba) & CAN_MCAN_RXF0C_F0SA) | |
| (ARRAY_SIZE(msg_ram->rx_fifo0) << CAN_MCAN_RXF0C_F0S_POS); |
| can->rxf1c = (((uint32_t)msg_ram->rx_fifo1 - mrba) & CAN_MCAN_RXF1C_F1SA) | |
| (ARRAY_SIZE(msg_ram->rx_fifo1) << CAN_MCAN_RXF1C_F1S_POS); |
| can->rxbc = (((uint32_t)msg_ram->rx_buffer - mrba) & CAN_MCAN_RXBC_RBSA); |
| can->txefc = (((uint32_t)msg_ram->tx_event_fifo - mrba) & CAN_MCAN_TXEFC_EFSA_MSK) | |
| (ARRAY_SIZE(msg_ram->tx_event_fifo) << CAN_MCAN_TXEFC_EFS_POS); |
| can->txbc = (((uint32_t)msg_ram->tx_buffer - mrba) & CAN_MCAN_TXBC_TBSA) | |
| (ARRAY_SIZE(msg_ram->tx_buffer) << CAN_MCAN_TXBC_TFQS_POS) | |
| CAN_MCAN_TXBC_TFQM; |
| |
| if (sizeof(msg_ram->tx_buffer[0].data) <= 24) { |
| can->txesc = (sizeof(msg_ram->tx_buffer[0].data) - 8) / 4; |
| } else { |
| can->txesc = (sizeof(msg_ram->tx_buffer[0].data) - 32) / 16 + 5; |
| } |
| |
| if (sizeof(msg_ram->rx_fifo0[0].data) <= 24) { |
| can->rxesc = (((sizeof(msg_ram->rx_fifo0[0].data) - 8) / 4) << |
| CAN_MCAN_RXESC_F0DS_POS) | |
| (((sizeof(msg_ram->rx_fifo1[0].data) - 8) / 4) << |
| CAN_MCAN_RXESC_F1DS_POS) | |
| (((sizeof(msg_ram->rx_buffer[0].data) - 8) / 4) << |
| CAN_MCAN_RXESC_RBDS_POS); |
| } else { |
| can->rxesc = (((sizeof(msg_ram->rx_fifo0[0].data) - 32) |
| / 16 + 5) << CAN_MCAN_RXESC_F0DS_POS) | |
| (((sizeof(msg_ram->rx_fifo1[0].data) - 32) |
| / 16 + 5) << CAN_MCAN_RXESC_F1DS_POS) | |
| (((sizeof(msg_ram->rx_buffer[0].data) - 32) |
| / 16 + 5) << CAN_MCAN_RXESC_RBDS_POS); |
| } |
| #endif |
| can->cccr &= ~(CAN_MCAN_CCCR_FDOE | CAN_MCAN_CCCR_BRSE | |
| CAN_MCAN_CCCR_TEST | CAN_MCAN_CCCR_MON | |
| CAN_MCAN_CCCR_ASM); |
| can->test &= ~(CAN_MCAN_TEST_LBCK); |
| |
| #if defined(CONFIG_CAN_DELAY_COMP) && defined(CONFIG_CAN_FD_MODE) |
| can->dbtp |= CAN_MCAN_DBTP_TDC; |
| can->tdcr |= cfg->tx_delay_comp_offset << CAN_MCAN_TDCR_TDCO_POS; |
| |
| #endif |
| |
| #ifdef CONFIG_CAN_STM32FD |
| can->rxgfc |= (CONFIG_CAN_MAX_STD_ID_FILTER << CAN_MCAN_RXGFC_LSS_POS) | |
| (CONFIG_CAN_MAX_EXT_ID_FILTER << CAN_MCAN_RXGFC_LSE_POS) | |
| (0x2 << CAN_MCAN_RXGFC_ANFS_POS) | |
| (0x2 << CAN_MCAN_RXGFC_ANFE_POS); |
| #else |
| can->gfc |= (0x2 << CAN_MCAN_GFC_ANFE_POS) | |
| (0x2 << CAN_MCAN_GFC_ANFS_POS); |
| #endif /* CONFIG_CAN_STM32FD */ |
| |
| if (cfg->sample_point) { |
| ret = can_calc_timing(dev, &timing, cfg->bus_speed, |
| cfg->sample_point); |
| if (ret == -EINVAL) { |
| LOG_ERR("Can't find timing for given param"); |
| return -EIO; |
| } |
| LOG_DBG("Presc: %d, TS1: %d, TS2: %d", |
| timing.prescaler, timing.phase_seg1, timing.phase_seg2); |
| LOG_DBG("Sample-point err : %d", ret); |
| } else if (cfg->prop_ts1) { |
| timing.prop_seg = 0; |
| timing.phase_seg1 = cfg->prop_ts1; |
| timing.phase_seg2 = cfg->ts2; |
| ret = can_calc_prescaler(dev, &timing, cfg->bus_speed); |
| if (ret) { |
| LOG_WRN("Bitrate error: %d", ret); |
| } |
| } |
| #ifdef CONFIG_CAN_FD_MODE |
| if (cfg->sample_point_data) { |
| ret = can_calc_timing_data(dev, &timing_data, |
| cfg->bus_speed_data, |
| cfg->sample_point_data); |
| if (ret == -EINVAL) { |
| LOG_ERR("Can't find timing for given dataphase param"); |
| return -EIO; |
| } |
| |
| LOG_DBG("Sample-point err data phase: %d", ret); |
| } else if (cfg->prop_ts1_data) { |
| timing_data.prop_seg = 0; |
| timing_data.phase_seg1 = cfg->prop_ts1_data; |
| timing_data.phase_seg2 = cfg->ts2_data; |
| ret = can_calc_prescaler(dev, &timing_data, |
| cfg->bus_speed_data); |
| if (ret) { |
| LOG_WRN("Dataphase bitrate error: %d", ret); |
| } |
| } |
| #endif |
| |
| timing.sjw = cfg->sjw; |
| #ifdef CONFIG_CAN_FD_MODE |
| timing_data.sjw = cfg->sjw_data; |
| can_mcan_configure_timing(can, &timing, &timing_data); |
| #else |
| can_mcan_configure_timing(can, &timing, NULL); |
| #endif |
| |
| can->ie = CAN_MCAN_IE_BO | CAN_MCAN_IE_EW | CAN_MCAN_IE_EP | |
| CAN_MCAN_IE_MRAF | CAN_MCAN_IE_TEFL | CAN_MCAN_IE_TEFN | |
| CAN_MCAN_IE_RF0N | CAN_MCAN_IE_RF1N | CAN_MCAN_IE_RF0L | |
| CAN_MCAN_IE_RF1L; |
| |
| #ifdef CONFIG_CAN_STM32FD |
| can->ils = CAN_MCAN_ILS_RXFIFO0 | CAN_MCAN_ILS_RXFIFO1; |
| #else |
| can->ils = CAN_MCAN_ILS_RF0N | CAN_MCAN_ILS_RF1N; |
| #endif |
| can->ile = CAN_MCAN_ILE_EINT0 | CAN_MCAN_ILE_EINT1; |
| /* Interrupt on every TX fifo element*/ |
| can->txbtie = CAN_MCAN_TXBTIE_TIE; |
| |
| memset32_volatile(msg_ram, 0, sizeof(struct can_mcan_msg_sram)); |
| sys_cache_data_flush_range(msg_ram, sizeof(struct can_mcan_msg_sram)); |
| |
| return 0; |
| } |
| |
| static void can_mcan_state_change_handler(const struct device *dev) |
| { |
| struct can_mcan_data *data = dev->data; |
| const can_state_change_callback_t cb = data->state_change_cb; |
| void *cb_data = data->state_change_cb_data; |
| struct can_bus_err_cnt err_cnt; |
| enum can_state state; |
| |
| (void)can_mcan_get_state(dev, &state, &err_cnt); |
| |
| if (cb != NULL) { |
| cb(dev, state, err_cnt, cb_data); |
| } |
| } |
| |
| static void can_mcan_tc_event_handler(const struct device *dev) |
| { |
| const struct can_mcan_config *cfg = dev->config; |
| struct can_mcan_data *data = dev->data; |
| struct can_mcan_reg *can = cfg->can; |
| struct can_mcan_msg_sram *msg_ram = data->msg_ram; |
| volatile struct can_mcan_tx_event_fifo *tx_event; |
| can_tx_callback_t tx_cb; |
| uint32_t event_idx, tx_idx; |
| |
| while (can->txefs & CAN_MCAN_TXEFS_EFFL) { |
| event_idx = (can->txefs & CAN_MCAN_TXEFS_EFGI) >> |
| CAN_MCAN_TXEFS_EFGI_POS; |
| sys_cache_data_invd_range((void *)&msg_ram->tx_event_fifo[event_idx], |
| sizeof(struct can_mcan_tx_event_fifo)); |
| tx_event = &msg_ram->tx_event_fifo[event_idx]; |
| tx_idx = tx_event->mm.idx; |
| /* Acknowledge TX event */ |
| can->txefa = event_idx; |
| |
| k_sem_give(&data->tx_sem); |
| |
| tx_cb = data->tx_fin_cb[tx_idx]; |
| data->tx_fin_cb[tx_idx] = NULL; |
| tx_cb(dev, 0, data->tx_fin_cb_arg[tx_idx]); |
| } |
| } |
| |
| void can_mcan_line_0_isr(const struct device *dev) |
| { |
| const struct can_mcan_config *cfg = dev->config; |
| struct can_mcan_data *data = dev->data; |
| struct can_mcan_reg *can = cfg->can; |
| |
| do { |
| if (can->ir & (CAN_MCAN_IR_BO | CAN_MCAN_IR_EP | |
| CAN_MCAN_IR_EW)) { |
| can->ir = CAN_MCAN_IR_BO | CAN_MCAN_IR_EP | |
| CAN_MCAN_IR_EW; |
| can_mcan_state_change_handler(dev); |
| } |
| /* TX event FIFO new entry */ |
| if (can->ir & CAN_MCAN_IR_TEFN) { |
| can->ir = CAN_MCAN_IR_TEFN; |
| can_mcan_tc_event_handler(dev); |
| } |
| |
| if (can->ir & CAN_MCAN_IR_TEFL) { |
| can->ir = CAN_MCAN_IR_TEFL; |
| LOG_ERR("TX FIFO element lost"); |
| k_sem_give(&data->tx_sem); |
| } |
| |
| if (can->ir & CAN_MCAN_IR_ARA) { |
| can->ir = CAN_MCAN_IR_ARA; |
| LOG_ERR("Access to reserved address"); |
| } |
| |
| if (can->ir & CAN_MCAN_IR_MRAF) { |
| can->ir = CAN_MCAN_IR_MRAF; |
| LOG_ERR("Message RAM access failure"); |
| } |
| |
| } while (can->ir & (CAN_MCAN_IR_BO | CAN_MCAN_IR_EW | CAN_MCAN_IR_EP | |
| CAN_MCAN_IR_TEFL | CAN_MCAN_IR_TEFN)); |
| } |
| |
| static void can_mcan_get_message(const struct device *dev, |
| volatile struct can_mcan_rx_fifo *fifo, |
| volatile uint32_t *fifo_status_reg, |
| volatile uint32_t *fifo_ack_reg) |
| { |
| struct can_mcan_data *data = dev->data; |
| uint32_t get_idx, filt_idx; |
| struct can_frame frame = {0}; |
| can_rx_callback_t cb; |
| int data_length; |
| void *cb_arg; |
| struct can_mcan_rx_fifo_hdr hdr; |
| bool rtr_filter_mask; |
| bool rtr_filter; |
| |
| while ((*fifo_status_reg & CAN_MCAN_RXF0S_F0FL)) { |
| get_idx = (*fifo_status_reg & CAN_MCAN_RXF0S_F0GI) >> |
| CAN_MCAN_RXF0S_F0GI_POS; |
| |
| sys_cache_data_invd_range((void *)&fifo[get_idx].hdr, |
| sizeof(struct can_mcan_rx_fifo_hdr)); |
| memcpy32_volatile(&hdr, &fifo[get_idx].hdr, |
| sizeof(struct can_mcan_rx_fifo_hdr)); |
| |
| frame.dlc = hdr.dlc; |
| |
| if (hdr.rtr != 0) { |
| frame.flags |= CAN_FRAME_RTR; |
| } |
| |
| if (hdr.fdf != 0) { |
| frame.flags |= CAN_FRAME_FDF; |
| } |
| |
| if (hdr.brs != 0) { |
| frame.flags |= CAN_FRAME_BRS; |
| } |
| |
| #if defined(CONFIG_CAN_RX_TIMESTAMP) |
| frame.timestamp = hdr.rxts; |
| #endif |
| |
| filt_idx = hdr.fidx; |
| |
| if (hdr.xtd != 0) { |
| frame.id = hdr.ext_id; |
| frame.flags |= CAN_FRAME_IDE; |
| rtr_filter_mask = (data->ext_filt_rtr_mask & BIT(filt_idx)) != 0; |
| rtr_filter = (data->ext_filt_rtr & BIT(filt_idx)) != 0; |
| } else { |
| frame.id = hdr.std_id; |
| rtr_filter_mask = (data->std_filt_rtr_mask & BIT(filt_idx)) != 0; |
| rtr_filter = (data->std_filt_rtr & BIT(filt_idx)) != 0; |
| } |
| |
| if (rtr_filter_mask && (rtr_filter != ((frame.flags & CAN_FRAME_RTR) != 0))) { |
| /* RTR bit does not match filter RTR mask, drop frame */ |
| *fifo_ack_reg = get_idx; |
| continue; |
| } |
| |
| data_length = can_dlc_to_bytes(frame.dlc); |
| if (data_length <= sizeof(frame.data)) { |
| /* Data needs to be written in 32 bit blocks! */ |
| sys_cache_data_invd_range((void *)fifo[get_idx].data_32, |
| ROUND_UP(data_length, sizeof(uint32_t))); |
| memcpy32_volatile(frame.data_32, fifo[get_idx].data_32, |
| ROUND_UP(data_length, sizeof(uint32_t))); |
| |
| if ((frame.flags & CAN_FRAME_IDE) != 0) { |
| LOG_DBG("Frame on filter %d, ID: 0x%x", |
| filt_idx + NUM_STD_FILTER_DATA, |
| frame.id); |
| cb = data->rx_cb_ext[filt_idx]; |
| cb_arg = data->cb_arg_ext[filt_idx]; |
| } else { |
| LOG_DBG("Frame on filter %d, ID: 0x%x", |
| filt_idx, frame.id); |
| cb = data->rx_cb_std[filt_idx]; |
| cb_arg = data->cb_arg_std[filt_idx]; |
| } |
| |
| if (cb) { |
| cb(dev, &frame, cb_arg); |
| } else { |
| LOG_DBG("cb missing"); |
| } |
| } else { |
| LOG_ERR("Frame is too big"); |
| } |
| |
| *fifo_ack_reg = get_idx; |
| } |
| } |
| |
| void can_mcan_line_1_isr(const struct device *dev) |
| { |
| const struct can_mcan_config *cfg = dev->config; |
| struct can_mcan_data *data = dev->data; |
| struct can_mcan_reg *can = cfg->can; |
| struct can_mcan_msg_sram *msg_ram = data->msg_ram; |
| |
| do { |
| if (can->ir & CAN_MCAN_IR_RF0N) { |
| can->ir = CAN_MCAN_IR_RF0N; |
| LOG_DBG("RX FIFO0 INT"); |
| can_mcan_get_message(dev, msg_ram->rx_fifo0, |
| &can->rxf0s, &can->rxf0a); |
| } |
| |
| if (can->ir & CAN_MCAN_IR_RF1N) { |
| can->ir = CAN_MCAN_IR_RF1N; |
| LOG_DBG("RX FIFO1 INT"); |
| can_mcan_get_message(dev, msg_ram->rx_fifo1, |
| &can->rxf1s, &can->rxf1a); |
| } |
| |
| if (can->ir & CAN_MCAN_IR_RF0L) { |
| can->ir = CAN_MCAN_IR_RF0L; |
| LOG_ERR("Message lost on FIFO0"); |
| } |
| |
| if (can->ir & CAN_MCAN_IR_RF1L) { |
| can->ir = CAN_MCAN_IR_RF1L; |
| LOG_ERR("Message lost on FIFO1"); |
| } |
| |
| } while (can->ir & (CAN_MCAN_IR_RF0N | CAN_MCAN_IR_RF1N | |
| CAN_MCAN_IR_RF0L | CAN_MCAN_IR_RF1L)); |
| } |
| |
| int can_mcan_get_state(const struct device *dev, enum can_state *state, |
| struct can_bus_err_cnt *err_cnt) |
| { |
| const struct can_mcan_config *cfg = dev->config; |
| struct can_mcan_data *data = dev->data; |
| struct can_mcan_reg *can = cfg->can; |
| |
| if (state != NULL) { |
| if (!data->started) { |
| *state = CAN_STATE_STOPPED; |
| } else if (can->psr & CAN_MCAN_PSR_BO) { |
| *state = CAN_STATE_BUS_OFF; |
| } else if (can->psr & CAN_MCAN_PSR_EP) { |
| *state = CAN_STATE_ERROR_PASSIVE; |
| } else if (can->psr & CAN_MCAN_PSR_EW) { |
| *state = CAN_STATE_ERROR_WARNING; |
| } else { |
| *state = CAN_STATE_ERROR_ACTIVE; |
| } |
| } |
| |
| if (err_cnt != NULL) { |
| err_cnt->tx_err_cnt = (can->ecr & CAN_MCAN_ECR_TEC_MSK) << |
| CAN_MCAN_ECR_TEC_POS; |
| |
| err_cnt->rx_err_cnt = (can->ecr & CAN_MCAN_ECR_REC_MSK) << |
| CAN_MCAN_ECR_REC_POS; |
| } |
| |
| return 0; |
| } |
| |
| #ifndef CONFIG_CAN_AUTO_BUS_OFF_RECOVERY |
| int can_mcan_recover(const struct device *dev, k_timeout_t timeout) |
| { |
| const struct can_mcan_config *cfg = dev->config; |
| struct can_mcan_data *data = dev->data; |
| struct can_mcan_reg *can = cfg->can; |
| |
| if (!data->started) { |
| return -ENETDOWN; |
| } |
| |
| return can_leave_init_mode(can, timeout); |
| } |
| #endif /* CONFIG_CAN_AUTO_BUS_OFF_RECOVERY */ |
| |
| |
| int can_mcan_send(const struct device *dev, |
| const struct can_frame *frame, |
| k_timeout_t timeout, |
| can_tx_callback_t callback, void *user_data) |
| { |
| const struct can_mcan_config *cfg = dev->config; |
| struct can_mcan_data *data = dev->data; |
| struct can_mcan_reg *can = cfg->can; |
| struct can_mcan_msg_sram *msg_ram = data->msg_ram; |
| size_t data_length = can_dlc_to_bytes(frame->dlc); |
| struct can_mcan_tx_buffer_hdr tx_hdr = { |
| .rtr = (frame->flags & CAN_FRAME_RTR) != 0 ? 1U : 0U, |
| .xtd = (frame->flags & CAN_FRAME_IDE) != 0 ? 1U : 0U, |
| .esi = 0U, |
| .dlc = frame->dlc, |
| #ifdef CONFIG_CAN_FD_MODE |
| .fdf = (frame->flags & CAN_FRAME_FDF) != 0 ? 1U : 0U, |
| .brs = (frame->flags & CAN_FRAME_BRS) != 0 ? 1U : 0U, |
| #else /* CONFIG_CAN_FD_MODE */ |
| .fdf = 0U, |
| .brs = 0U, |
| #endif /* !CONFIG_CAN_FD_MODE */ |
| .efc = 1U, |
| }; |
| uint32_t put_idx; |
| int ret; |
| struct can_mcan_mm mm; |
| |
| LOG_DBG("Sending %d bytes. Id: 0x%x, ID type: %s %s %s %s", |
| data_length, frame->id, |
| (frame->flags & CAN_FRAME_IDE) != 0 ? "extended" : "standard", |
| (frame->flags & CAN_FRAME_RTR) != 0 ? "RTR" : "", |
| (frame->flags & CAN_FRAME_FDF) != 0 ? "FD frame" : "", |
| (frame->flags & CAN_FRAME_BRS) != 0 ? "BRS" : ""); |
| |
| __ASSERT_NO_MSG(callback != NULL); |
| |
| #ifdef CONFIG_CAN_FD_MODE |
| if ((frame->flags & ~(CAN_FRAME_IDE | CAN_FRAME_RTR | |
| CAN_FRAME_FDF | CAN_FRAME_BRS)) != 0) { |
| LOG_ERR("unsupported CAN frame flags 0x%02x", frame->flags); |
| return -ENOTSUP; |
| } |
| |
| if ((frame->flags & CAN_FRAME_FDF) != 0 && (can->cccr & CAN_MCAN_CCCR_FDOE) == 0) { |
| LOG_ERR("CAN-FD format not supported in non-FD mode"); |
| return -ENOTSUP; |
| } |
| |
| if ((frame->flags & CAN_FRAME_BRS) != 0 && (can->cccr & CAN_MCAN_CCCR_BRSE) == 0) { |
| LOG_ERR("CAN-FD BRS not supported in non-FD mode"); |
| return -ENOTSUP; |
| } |
| #else /* CONFIG_CAN_FD_MODE */ |
| if ((frame->flags & ~(CAN_FRAME_IDE | CAN_FRAME_RTR)) != 0) { |
| LOG_ERR("unsupported CAN frame flags 0x%02x", frame->flags); |
| return -ENOTSUP; |
| } |
| #endif /* !CONFIG_CAN_FD_MODE */ |
| |
| if (data_length > sizeof(frame->data)) { |
| LOG_ERR("data length (%zu) > max frame data length (%zu)", |
| data_length, sizeof(frame->data)); |
| return -EINVAL; |
| } |
| |
| if ((frame->flags & CAN_FRAME_FDF) != 0) { |
| if (frame->dlc > CANFD_MAX_DLC) { |
| LOG_ERR("DLC of %d for CAN-FD format frame", frame->dlc); |
| return -EINVAL; |
| } |
| } else { |
| if (frame->dlc > CAN_MAX_DLC) { |
| LOG_ERR("DLC of %d for non-FD format frame", frame->dlc); |
| return -EINVAL; |
| } |
| } |
| |
| if (!data->started) { |
| return -ENETDOWN; |
| } |
| |
| if (can->psr & CAN_MCAN_PSR_BO) { |
| return -ENETUNREACH; |
| } |
| |
| ret = k_sem_take(&data->tx_sem, timeout); |
| if (ret != 0) { |
| return -EAGAIN; |
| } |
| |
| __ASSERT_NO_MSG((can->txfqs & CAN_MCAN_TXFQS_TFQF) != |
| CAN_MCAN_TXFQS_TFQF); |
| |
| k_mutex_lock(&data->tx_mtx, K_FOREVER); |
| |
| put_idx = ((can->txfqs & CAN_MCAN_TXFQS_TFQPI) >> |
| CAN_MCAN_TXFQS_TFQPI_POS); |
| |
| mm.idx = put_idx; |
| mm.cnt = data->mm.cnt++; |
| tx_hdr.mm = mm; |
| |
| if ((frame->flags & CAN_FRAME_IDE) != 0) { |
| tx_hdr.ext_id = frame->id; |
| } else { |
| tx_hdr.std_id = frame->id & CAN_STD_ID_MASK; |
| } |
| |
| memcpy32_volatile(&msg_ram->tx_buffer[put_idx].hdr, &tx_hdr, sizeof(tx_hdr)); |
| memcpy32_volatile(msg_ram->tx_buffer[put_idx].data_32, frame->data_32, |
| ROUND_UP(data_length, 4)); |
| sys_cache_data_flush_range((void *)&msg_ram->tx_buffer[put_idx].hdr, sizeof(tx_hdr)); |
| sys_cache_data_flush_range((void *)&msg_ram->tx_buffer[put_idx].data_32, |
| ROUND_UP(data_length, 4)); |
| |
| data->tx_fin_cb[put_idx] = callback; |
| data->tx_fin_cb_arg[put_idx] = user_data; |
| |
| can->txbar = (1U << put_idx); |
| |
| k_mutex_unlock(&data->tx_mtx); |
| |
| return 0; |
| } |
| |
| static int can_mcan_get_free_std(volatile struct can_mcan_std_filter *filters) |
| { |
| for (int i = 0; i < NUM_STD_FILTER_DATA; ++i) { |
| if (filters[i].sfce == CAN_MCAN_FCE_DISABLE) { |
| return i; |
| } |
| } |
| |
| return -ENOSPC; |
| } |
| |
| int can_mcan_get_max_filters(const struct device *dev, bool ide) |
| { |
| ARG_UNUSED(dev); |
| |
| if (ide) { |
| return NUM_EXT_FILTER_DATA; |
| } else { |
| return NUM_STD_FILTER_DATA; |
| } |
| } |
| |
| /* Use masked configuration only for simplicity. If someone needs more than |
| * 28 standard filters, dual mode needs to be implemented. |
| * Dual mode gets tricky, because we can only activate both filters. |
| * If one of the IDs is not used anymore, we would need to mark it as unused. |
| */ |
| int can_mcan_add_rx_filter_std(const struct device *dev, |
| can_rx_callback_t callback, void *user_data, |
| const struct can_filter *filter) |
| { |
| struct can_mcan_data *data = dev->data; |
| struct can_mcan_msg_sram *msg_ram = data->msg_ram; |
| struct can_mcan_std_filter filter_element = { |
| .id1 = filter->id, |
| .id2 = filter->mask, |
| .sft = CAN_MCAN_SFT_MASKED |
| }; |
| int filter_id; |
| |
| if ((filter->flags & ~(CAN_FILTER_IDE | CAN_FILTER_DATA | CAN_FILTER_RTR)) != 0) { |
| LOG_ERR("unsupported CAN filter flags 0x%02x", filter->flags); |
| return -ENOTSUP; |
| } |
| |
| k_mutex_lock(&data->inst_mutex, K_FOREVER); |
| filter_id = can_mcan_get_free_std(msg_ram->std_filt); |
| |
| if (filter_id == -ENOSPC) { |
| LOG_WRN("No free standard id filter left"); |
| return -ENOSPC; |
| } |
| |
| /* TODO proper fifo balancing */ |
| filter_element.sfce = filter_id & 0x01 ? CAN_MCAN_FCE_FIFO1 : |
| CAN_MCAN_FCE_FIFO0; |
| |
| memcpy32_volatile(&msg_ram->std_filt[filter_id], &filter_element, |
| sizeof(struct can_mcan_std_filter)); |
| sys_cache_data_flush_range((void *)&msg_ram->std_filt[filter_id], |
| sizeof(struct can_mcan_std_filter)); |
| |
| k_mutex_unlock(&data->inst_mutex); |
| |
| LOG_DBG("Attached std filter at %d", filter_id); |
| |
| if ((filter->flags & CAN_FILTER_RTR) != 0) { |
| data->std_filt_rtr |= (1U << filter_id); |
| } else { |
| data->std_filt_rtr &= ~(1U << filter_id); |
| } |
| |
| if ((filter->flags & (CAN_FILTER_DATA | CAN_FILTER_RTR)) != |
| (CAN_FILTER_DATA | CAN_FILTER_RTR)) { |
| data->std_filt_rtr_mask |= (1U << filter_id); |
| } else { |
| data->std_filt_rtr_mask &= ~(1U << filter_id); |
| } |
| |
| data->rx_cb_std[filter_id] = callback; |
| data->cb_arg_std[filter_id] = user_data; |
| |
| return filter_id; |
| } |
| |
| static int can_mcan_get_free_ext(volatile struct can_mcan_ext_filter *filters) |
| { |
| for (int i = 0; i < NUM_EXT_FILTER_DATA; ++i) { |
| if (filters[i].efce == CAN_MCAN_FCE_DISABLE) { |
| return i; |
| } |
| } |
| |
| return -ENOSPC; |
| } |
| |
| static int can_mcan_add_rx_filter_ext(const struct device *dev, |
| can_rx_callback_t callback, void *user_data, |
| const struct can_filter *filter) |
| { |
| struct can_mcan_data *data = dev->data; |
| struct can_mcan_msg_sram *msg_ram = data->msg_ram; |
| struct can_mcan_ext_filter filter_element = { |
| .id2 = filter->mask, |
| .id1 = filter->id, |
| .eft = CAN_MCAN_EFT_MASKED |
| }; |
| int filter_id; |
| |
| k_mutex_lock(&data->inst_mutex, K_FOREVER); |
| filter_id = can_mcan_get_free_ext(msg_ram->ext_filt); |
| |
| if (filter_id == -ENOSPC) { |
| LOG_WRN("No free extended id filter left"); |
| return -ENOSPC; |
| } |
| |
| /* TODO proper fifo balancing */ |
| filter_element.efce = filter_id & 0x01 ? CAN_MCAN_FCE_FIFO1 : |
| CAN_MCAN_FCE_FIFO0; |
| |
| memcpy32_volatile(&msg_ram->ext_filt[filter_id], &filter_element, |
| sizeof(struct can_mcan_ext_filter)); |
| sys_cache_data_flush_range((void *)&msg_ram->ext_filt[filter_id], |
| sizeof(struct can_mcan_ext_filter)); |
| |
| k_mutex_unlock(&data->inst_mutex); |
| |
| LOG_DBG("Attached ext filter at %d", filter_id); |
| |
| if ((filter->flags & CAN_FILTER_RTR) != 0) { |
| data->ext_filt_rtr |= (1U << filter_id); |
| } else { |
| data->ext_filt_rtr &= ~(1U << filter_id); |
| } |
| |
| if ((filter->flags & (CAN_FILTER_DATA | CAN_FILTER_RTR)) != |
| (CAN_FILTER_DATA | CAN_FILTER_RTR)) { |
| data->ext_filt_rtr_mask |= (1U << filter_id); |
| } else { |
| data->ext_filt_rtr_mask &= ~(1U << filter_id); |
| } |
| |
| data->rx_cb_ext[filter_id] = callback; |
| data->cb_arg_ext[filter_id] = user_data; |
| |
| return filter_id; |
| } |
| |
| int can_mcan_add_rx_filter(const struct device *dev, |
| can_rx_callback_t callback, void *user_data, |
| const struct can_filter *filter) |
| { |
| int filter_id; |
| |
| if (callback == NULL) { |
| return -EINVAL; |
| } |
| |
| if ((filter->flags & CAN_FILTER_IDE) != 0) { |
| filter_id = can_mcan_add_rx_filter_ext(dev, callback, user_data, filter); |
| if (filter_id >= 0) { |
| filter_id += NUM_STD_FILTER_DATA; |
| } |
| } else { |
| filter_id = can_mcan_add_rx_filter_std(dev, callback, user_data, filter); |
| } |
| |
| return filter_id; |
| } |
| |
| void can_mcan_remove_rx_filter(const struct device *dev, int filter_id) |
| { |
| struct can_mcan_data *data = dev->data; |
| struct can_mcan_msg_sram *msg_ram = data->msg_ram; |
| |
| k_mutex_lock(&data->inst_mutex, K_FOREVER); |
| if (filter_id >= NUM_STD_FILTER_DATA) { |
| filter_id -= NUM_STD_FILTER_DATA; |
| if (filter_id >= NUM_EXT_FILTER_DATA) { |
| LOG_ERR("Wrong filter id"); |
| return; |
| } |
| |
| memset32_volatile(&msg_ram->ext_filt[filter_id], 0, |
| sizeof(struct can_mcan_ext_filter)); |
| sys_cache_data_flush_range((void *)&msg_ram->ext_filt[filter_id], |
| sizeof(struct can_mcan_ext_filter)); |
| } else { |
| memset32_volatile(&msg_ram->std_filt[filter_id], 0, |
| sizeof(struct can_mcan_std_filter)); |
| sys_cache_data_flush_range((void *)&msg_ram->std_filt[filter_id], |
| sizeof(struct can_mcan_std_filter)); |
| } |
| |
| k_mutex_unlock(&data->inst_mutex); |
| } |
| |
| void can_mcan_set_state_change_callback(const struct device *dev, |
| can_state_change_callback_t callback, |
| void *user_data) |
| { |
| struct can_mcan_data *data = dev->data; |
| |
| data->state_change_cb = callback; |
| data->state_change_cb_data = user_data; |
| } |
| |
| int can_mcan_get_max_bitrate(const struct device *dev, uint32_t *max_bitrate) |
| { |
| const struct can_mcan_config *cfg = dev->config; |
| |
| *max_bitrate = cfg->max_bitrate; |
| |
| return 0; |
| } |
| |
| /* helper function allowing mcan drivers without access to private mcan |
| * definitions to set CCCR_CCE, which might be needed to disable write |
| * protection for some registers. |
| */ |
| void can_mcan_enable_configuration_change(const struct device *dev) |
| { |
| const struct can_mcan_config *cfg = dev->config; |
| struct can_mcan_reg *can = cfg->can; |
| |
| can->cccr |= CAN_MCAN_CCCR_CCE; |
| } |