| /* |
| * Copyright (c) 2021 Nordic Semiconductor ASA |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <zephyr/drivers/pinctrl.h> |
| |
| #include <hal/nrf_gpio.h> |
| |
| BUILD_ASSERT(((NRF_PULL_NONE == NRF_GPIO_PIN_NOPULL) && |
| (NRF_PULL_DOWN == NRF_GPIO_PIN_PULLDOWN) && |
| (NRF_PULL_UP == NRF_GPIO_PIN_PULLUP)), |
| "nRF pinctrl pull settings do not match HAL values"); |
| |
| BUILD_ASSERT(((NRF_DRIVE_S0S1 == NRF_GPIO_PIN_S0S1) && |
| (NRF_DRIVE_H0S1 == NRF_GPIO_PIN_H0S1) && |
| (NRF_DRIVE_S0H1 == NRF_GPIO_PIN_S0H1) && |
| (NRF_DRIVE_H0H1 == NRF_GPIO_PIN_H0H1) && |
| (NRF_DRIVE_D0S1 == NRF_GPIO_PIN_D0S1) && |
| (NRF_DRIVE_D0H1 == NRF_GPIO_PIN_D0H1) && |
| (NRF_DRIVE_S0D1 == NRF_GPIO_PIN_S0D1) && |
| (NRF_DRIVE_H0D1 == NRF_GPIO_PIN_H0D1) && |
| #if defined(GPIO_PIN_CNF_DRIVE_E0E1) |
| (NRF_DRIVE_E0E1 == NRF_GPIO_PIN_E0E1) && |
| #endif /* defined(GPIO_PIN_CNF_DRIVE_E0E1) */ |
| (1U)), |
| "nRF pinctrl drive settings do not match HAL values"); |
| |
| #if DT_HAS_COMPAT_STATUS_OKAY(nordic_nrf_uart) |
| #define NRF_PSEL_UART(reg, line) ((NRF_UART_Type *)reg)->PSEL##line |
| #elif DT_HAS_COMPAT_STATUS_OKAY(nordic_nrf_uarte) |
| #define NRF_PSEL_UART(reg, line) ((NRF_UARTE_Type *)reg)->PSEL.line |
| #endif |
| |
| #if DT_HAS_COMPAT_STATUS_OKAY(nordic_nrf_spi) |
| #define NRF_PSEL_SPIM(reg, line) ((NRF_SPI_Type *)reg)->PSEL##line |
| #elif DT_HAS_COMPAT_STATUS_OKAY(nordic_nrf_spim) |
| #define NRF_PSEL_SPIM(reg, line) ((NRF_SPIM_Type *)reg)->PSEL.line |
| #endif |
| |
| #if DT_HAS_COMPAT_STATUS_OKAY(nordic_nrf_spis) |
| #if defined(NRF51) |
| #define NRF_PSEL_SPIS(reg, line) ((NRF_SPIS_Type *)reg)->PSEL##line |
| #else |
| #define NRF_PSEL_SPIS(reg, line) ((NRF_SPIS_Type *)reg)->PSEL.line |
| #endif |
| #endif /* DT_HAS_COMPAT_STATUS_OKAY(nordic_nrf_spis) */ |
| |
| #if DT_HAS_COMPAT_STATUS_OKAY(nordic_nrf_twi) |
| #if !defined(TWI_PSEL_SCL_CONNECT_Pos) |
| #define NRF_PSEL_TWIM(reg, line) ((NRF_TWI_Type *)reg)->PSEL##line |
| #else |
| #define NRF_PSEL_TWIM(reg, line) ((NRF_TWI_Type *)reg)->PSEL.line |
| #endif |
| #elif DT_HAS_COMPAT_STATUS_OKAY(nordic_nrf_twim) |
| #define NRF_PSEL_TWIM(reg, line) ((NRF_TWIM_Type *)reg)->PSEL.line |
| #endif |
| |
| #if DT_HAS_COMPAT_STATUS_OKAY(nordic_nrf_i2s) |
| #define NRF_PSEL_I2S(reg, line) ((NRF_I2S_Type *)reg)->PSEL.line |
| #endif |
| |
| #if DT_HAS_COMPAT_STATUS_OKAY(nordic_nrf_pdm) |
| #define NRF_PSEL_PDM(reg, line) ((NRF_PDM_Type *)reg)->PSEL.line |
| #endif |
| |
| #if DT_HAS_COMPAT_STATUS_OKAY(nordic_nrf_pwm) |
| #define NRF_PSEL_PWM(reg, line) ((NRF_PWM_Type *)reg)->PSEL.line |
| #endif |
| |
| #if DT_HAS_COMPAT_STATUS_OKAY(nordic_nrf_qdec) |
| #define NRF_PSEL_QDEC(reg, line) ((NRF_QDEC_Type *)reg)->PSEL.line |
| #endif |
| |
| #if DT_HAS_COMPAT_STATUS_OKAY(nordic_nrf_qspi) |
| #define NRF_PSEL_QSPI(reg, line) ((NRF_QSPI_Type *)reg)->PSEL.line |
| #endif |
| |
| /** |
| * @brief Configure pin settings. |
| * |
| * @param pin Pin configuration. |
| * @param dir Pin direction. |
| * @param input Pin input buffer connection. |
| */ |
| __unused static void nrf_pin_configure(pinctrl_soc_pin_t pin, |
| nrf_gpio_pin_dir_t dir, |
| nrf_gpio_pin_input_t input, |
| nrf_gpio_pin_drive_t drive) |
| { |
| /* force input direction and disconnected buffer for low power */ |
| if (NRF_GET_LP(pin) == NRF_LP_ENABLE) { |
| dir = NRF_GPIO_PIN_DIR_INPUT; |
| input = NRF_GPIO_PIN_INPUT_DISCONNECT; |
| } |
| |
| nrf_gpio_cfg(NRF_GET_PIN(pin), dir, input, NRF_GET_PULL(pin), |
| NRF_GET_DRIVE(pin), NRF_GPIO_PIN_NOSENSE); |
| } |
| |
| int pinctrl_configure_pins(const pinctrl_soc_pin_t *pins, uint8_t pin_cnt, |
| uintptr_t reg) |
| { |
| for (uint8_t i = 0U; i < pin_cnt; i++) { |
| __unused nrf_gpio_pin_drive_t drive = NRF_GET_DRIVE(pins[i]); |
| |
| switch (NRF_GET_FUN(pins[i])) { |
| #if defined(NRF_PSEL_UART) |
| case NRF_FUN_UART_TX: |
| NRF_PSEL_UART(reg, TXD) = NRF_GET_PIN(pins[i]); |
| nrf_gpio_pin_write(NRF_GET_PIN(pins[i]), 1); |
| nrf_pin_configure(pins[i], NRF_GPIO_PIN_DIR_OUTPUT, |
| NRF_GPIO_PIN_INPUT_DISCONNECT, drive); |
| break; |
| case NRF_FUN_UART_RX: |
| NRF_PSEL_UART(reg, RXD) = NRF_GET_PIN(pins[i]); |
| nrf_pin_configure(pins[i], NRF_GPIO_PIN_DIR_INPUT, |
| NRF_GPIO_PIN_INPUT_CONNECT, drive); |
| break; |
| case NRF_FUN_UART_RTS: |
| NRF_PSEL_UART(reg, RTS) = NRF_GET_PIN(pins[i]); |
| nrf_gpio_pin_write(NRF_GET_PIN(pins[i]), 1); |
| nrf_pin_configure(pins[i], NRF_GPIO_PIN_DIR_OUTPUT, |
| NRF_GPIO_PIN_INPUT_DISCONNECT, drive); |
| break; |
| case NRF_FUN_UART_CTS: |
| NRF_PSEL_UART(reg, CTS) = NRF_GET_PIN(pins[i]); |
| nrf_pin_configure(pins[i], NRF_GPIO_PIN_DIR_INPUT, |
| NRF_GPIO_PIN_INPUT_CONNECT, drive); |
| break; |
| #endif /* defined(NRF_PSEL_UART) */ |
| #if defined(NRF_PSEL_SPIM) |
| case NRF_FUN_SPIM_SCK: |
| NRF_PSEL_SPIM(reg, SCK) = NRF_GET_PIN(pins[i]); |
| nrf_gpio_pin_write(NRF_GET_PIN(pins[i]), 0); |
| nrf_pin_configure(pins[i], NRF_GPIO_PIN_DIR_OUTPUT, |
| NRF_GPIO_PIN_INPUT_CONNECT, drive); |
| break; |
| case NRF_FUN_SPIM_MOSI: |
| NRF_PSEL_SPIM(reg, MOSI) = NRF_GET_PIN(pins[i]); |
| nrf_gpio_pin_write(NRF_GET_PIN(pins[i]), 0); |
| nrf_pin_configure(pins[i], NRF_GPIO_PIN_DIR_OUTPUT, |
| NRF_GPIO_PIN_INPUT_DISCONNECT, drive); |
| break; |
| case NRF_FUN_SPIM_MISO: |
| NRF_PSEL_SPIM(reg, MISO) = NRF_GET_PIN(pins[i]); |
| nrf_pin_configure(pins[i], NRF_GPIO_PIN_DIR_INPUT, |
| NRF_GPIO_PIN_INPUT_CONNECT, drive); |
| break; |
| #endif /* defined(NRF_PSEL_SPIM) */ |
| #if defined(NRF_PSEL_SPIS) |
| case NRF_FUN_SPIS_SCK: |
| NRF_PSEL_SPIS(reg, SCK) = NRF_GET_PIN(pins[i]); |
| nrf_pin_configure(pins[i], NRF_GPIO_PIN_DIR_INPUT, |
| NRF_GPIO_PIN_INPUT_CONNECT, drive); |
| break; |
| case NRF_FUN_SPIS_MOSI: |
| NRF_PSEL_SPIS(reg, MOSI) = NRF_GET_PIN(pins[i]); |
| nrf_pin_configure(pins[i], NRF_GPIO_PIN_DIR_INPUT, |
| NRF_GPIO_PIN_INPUT_CONNECT, drive); |
| break; |
| case NRF_FUN_SPIS_MISO: |
| NRF_PSEL_SPIS(reg, MISO) = NRF_GET_PIN(pins[i]); |
| nrf_pin_configure(pins[i], NRF_GPIO_PIN_DIR_INPUT, |
| NRF_GPIO_PIN_INPUT_DISCONNECT, drive); |
| break; |
| case NRF_FUN_SPIS_CSN: |
| NRF_PSEL_SPIS(reg, CSN) = NRF_GET_PIN(pins[i]); |
| nrf_pin_configure(pins[i], NRF_GPIO_PIN_DIR_INPUT, |
| NRF_GPIO_PIN_INPUT_CONNECT, drive); |
| break; |
| #endif /* defined(NRF_PSEL_SPIS) */ |
| #if defined(NRF_PSEL_TWIM) |
| case NRF_FUN_TWIM_SCL: |
| NRF_PSEL_TWIM(reg, SCL) = NRF_GET_PIN(pins[i]); |
| if (drive == NRF_DRIVE_S0S1) { |
| /* Override the default drive setting with one |
| * suitable for TWI/TWIM peripherals (S0D1). |
| * This drive cannot be used always so that |
| * users are able to select e.g. H0D1 or E0E1 |
| * in devicetree. |
| */ |
| drive = NRF_DRIVE_S0D1; |
| } |
| nrf_pin_configure(pins[i], NRF_GPIO_PIN_DIR_INPUT, |
| NRF_GPIO_PIN_INPUT_CONNECT, drive); |
| break; |
| case NRF_FUN_TWIM_SDA: |
| NRF_PSEL_TWIM(reg, SDA) = NRF_GET_PIN(pins[i]); |
| if (drive == NRF_DRIVE_S0S1) { |
| drive = NRF_DRIVE_S0D1; |
| } |
| nrf_pin_configure(pins[i], NRF_GPIO_PIN_DIR_INPUT, |
| NRF_GPIO_PIN_INPUT_CONNECT, drive); |
| break; |
| #endif /* defined(NRF_PSEL_TWIM) */ |
| #if defined(NRF_PSEL_I2S) |
| case NRF_FUN_I2S_SCK_M: |
| NRF_PSEL_I2S(reg, SCK) = NRF_GET_PIN(pins[i]); |
| nrf_gpio_pin_write(NRF_GET_PIN(pins[i]), 0); |
| nrf_pin_configure(pins[i], NRF_GPIO_PIN_DIR_OUTPUT, |
| NRF_GPIO_PIN_INPUT_DISCONNECT, drive); |
| break; |
| case NRF_FUN_I2S_SCK_S: |
| NRF_PSEL_I2S(reg, SCK) = NRF_GET_PIN(pins[i]); |
| nrf_pin_configure(pins[i], NRF_GPIO_PIN_DIR_INPUT, |
| NRF_GPIO_PIN_INPUT_CONNECT, drive); |
| break; |
| case NRF_FUN_I2S_LRCK_M: |
| NRF_PSEL_I2S(reg, LRCK) = NRF_GET_PIN(pins[i]); |
| nrf_gpio_pin_write(NRF_GET_PIN(pins[i]), 0); |
| nrf_pin_configure(pins[i], NRF_GPIO_PIN_DIR_OUTPUT, |
| NRF_GPIO_PIN_INPUT_DISCONNECT, drive); |
| break; |
| case NRF_FUN_I2S_LRCK_S: |
| NRF_PSEL_I2S(reg, LRCK) = NRF_GET_PIN(pins[i]); |
| nrf_pin_configure(pins[i], NRF_GPIO_PIN_DIR_INPUT, |
| NRF_GPIO_PIN_INPUT_CONNECT, drive); |
| break; |
| case NRF_FUN_I2S_SDIN: |
| NRF_PSEL_I2S(reg, SDIN) = NRF_GET_PIN(pins[i]); |
| nrf_pin_configure(pins[i], NRF_GPIO_PIN_DIR_INPUT, |
| NRF_GPIO_PIN_INPUT_CONNECT, drive); |
| break; |
| case NRF_FUN_I2S_SDOUT: |
| NRF_PSEL_I2S(reg, SDOUT) = NRF_GET_PIN(pins[i]); |
| nrf_gpio_pin_write(NRF_GET_PIN(pins[i]), 0); |
| nrf_pin_configure(pins[i], NRF_GPIO_PIN_DIR_OUTPUT, |
| NRF_GPIO_PIN_INPUT_DISCONNECT, drive); |
| break; |
| case NRF_FUN_I2S_MCK: |
| NRF_PSEL_I2S(reg, MCK) = NRF_GET_PIN(pins[i]); |
| nrf_gpio_pin_write(NRF_GET_PIN(pins[i]), 0); |
| nrf_pin_configure(pins[i], NRF_GPIO_PIN_DIR_OUTPUT, |
| NRF_GPIO_PIN_INPUT_DISCONNECT, drive); |
| break; |
| #endif /* defined(NRF_PSEL_I2S) */ |
| #if defined(NRF_PSEL_PDM) |
| case NRF_FUN_PDM_CLK: |
| NRF_PSEL_PDM(reg, CLK) = NRF_GET_PIN(pins[i]); |
| nrf_gpio_pin_write(NRF_GET_PIN(pins[i]), 0); |
| nrf_pin_configure(pins[i], NRF_GPIO_PIN_DIR_OUTPUT, |
| NRF_GPIO_PIN_INPUT_DISCONNECT, drive); |
| break; |
| case NRF_FUN_PDM_DIN: |
| NRF_PSEL_PDM(reg, DIN) = NRF_GET_PIN(pins[i]); |
| nrf_pin_configure(pins[i], NRF_GPIO_PIN_DIR_INPUT, |
| NRF_GPIO_PIN_INPUT_CONNECT, drive); |
| break; |
| #endif /* defined(NRF_PSEL_PDM) */ |
| #if defined(NRF_PSEL_PWM) |
| case NRF_FUN_PWM_OUT0: |
| NRF_PSEL_PWM(reg, OUT[0]) = NRF_GET_PIN(pins[i]); |
| nrf_gpio_pin_write(NRF_GET_PIN(pins[i]), |
| NRF_GET_INVERT(pins[i])); |
| nrf_pin_configure(pins[i], NRF_GPIO_PIN_DIR_OUTPUT, |
| NRF_GPIO_PIN_INPUT_DISCONNECT, drive); |
| break; |
| case NRF_FUN_PWM_OUT1: |
| NRF_PSEL_PWM(reg, OUT[1]) = NRF_GET_PIN(pins[i]); |
| nrf_gpio_pin_write(NRF_GET_PIN(pins[i]), |
| NRF_GET_INVERT(pins[i])); |
| nrf_pin_configure(pins[i], NRF_GPIO_PIN_DIR_OUTPUT, |
| NRF_GPIO_PIN_INPUT_DISCONNECT, drive); |
| break; |
| case NRF_FUN_PWM_OUT2: |
| NRF_PSEL_PWM(reg, OUT[2]) = NRF_GET_PIN(pins[i]); |
| nrf_gpio_pin_write(NRF_GET_PIN(pins[i]), |
| NRF_GET_INVERT(pins[i])); |
| nrf_pin_configure(pins[i], NRF_GPIO_PIN_DIR_OUTPUT, |
| NRF_GPIO_PIN_INPUT_DISCONNECT, drive); |
| break; |
| case NRF_FUN_PWM_OUT3: |
| NRF_PSEL_PWM(reg, OUT[3]) = NRF_GET_PIN(pins[i]); |
| nrf_gpio_pin_write(NRF_GET_PIN(pins[i]), |
| NRF_GET_INVERT(pins[i])); |
| nrf_pin_configure(pins[i], NRF_GPIO_PIN_DIR_OUTPUT, |
| NRF_GPIO_PIN_INPUT_DISCONNECT, drive); |
| break; |
| #endif /* defined(NRF_PSEL_PWM) */ |
| #if defined(NRF_PSEL_QDEC) |
| case NRF_FUN_QDEC_A: |
| NRF_PSEL_QDEC(reg, A) = NRF_GET_PIN(pins[i]); |
| nrf_pin_configure(pins[i], NRF_GPIO_PIN_DIR_INPUT, |
| NRF_GPIO_PIN_INPUT_CONNECT, drive); |
| break; |
| case NRF_FUN_QDEC_B: |
| NRF_PSEL_QDEC(reg, B) = NRF_GET_PIN(pins[i]); |
| nrf_pin_configure(pins[i], NRF_GPIO_PIN_DIR_INPUT, |
| NRF_GPIO_PIN_INPUT_CONNECT, drive); |
| break; |
| case NRF_FUN_QDEC_LED: |
| NRF_PSEL_QDEC(reg, LED) = NRF_GET_PIN(pins[i]); |
| nrf_pin_configure(pins[i], NRF_GPIO_PIN_DIR_INPUT, |
| NRF_GPIO_PIN_INPUT_CONNECT, drive); |
| break; |
| #endif /* defined(NRF_PSEL_QDEC) */ |
| #if defined(NRF_PSEL_QSPI) |
| case NRF_FUN_QSPI_SCK: |
| NRF_PSEL_QSPI(reg, SCK) = NRF_GET_PIN(pins[i]); |
| nrf_pin_configure(pins[i], NRF_GPIO_PIN_DIR_INPUT, |
| NRF_GPIO_PIN_INPUT_DISCONNECT, drive); |
| break; |
| case NRF_FUN_QSPI_CSN: |
| NRF_PSEL_QSPI(reg, CSN) = NRF_GET_PIN(pins[i]); |
| nrf_pin_configure(pins[i], NRF_GPIO_PIN_DIR_INPUT, |
| NRF_GPIO_PIN_INPUT_DISCONNECT, drive); |
| break; |
| case NRF_FUN_QSPI_IO0: |
| NRF_PSEL_QSPI(reg, IO0) = NRF_GET_PIN(pins[i]); |
| nrf_pin_configure(pins[i], NRF_GPIO_PIN_DIR_INPUT, |
| NRF_GPIO_PIN_INPUT_DISCONNECT, drive); |
| break; |
| case NRF_FUN_QSPI_IO1: |
| NRF_PSEL_QSPI(reg, IO1) = NRF_GET_PIN(pins[i]); |
| nrf_pin_configure(pins[i], NRF_GPIO_PIN_DIR_INPUT, |
| NRF_GPIO_PIN_INPUT_DISCONNECT, drive); |
| break; |
| case NRF_FUN_QSPI_IO2: |
| NRF_PSEL_QSPI(reg, IO2) = NRF_GET_PIN(pins[i]); |
| nrf_pin_configure(pins[i], NRF_GPIO_PIN_DIR_INPUT, |
| NRF_GPIO_PIN_INPUT_DISCONNECT, drive); |
| break; |
| case NRF_FUN_QSPI_IO3: |
| NRF_PSEL_QSPI(reg, IO3) = NRF_GET_PIN(pins[i]); |
| nrf_pin_configure(pins[i], NRF_GPIO_PIN_DIR_INPUT, |
| NRF_GPIO_PIN_INPUT_DISCONNECT, drive); |
| break; |
| #endif /* defined(NRF_PSEL_QSPI) */ |
| default: |
| return -ENOTSUP; |
| } |
| } |
| |
| return 0; |
| } |