| /* |
| * Copyright (c) 2015 Intel Corporation |
| * Copyright (c) 2017 Linaro Limited |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| /** |
| * @file |
| * |
| * Network loopback interface implementation. |
| */ |
| |
| #define LOG_MODULE_NAME netlo |
| #define LOG_LEVEL CONFIG_NET_LOOPBACK_LOG_LEVEL |
| |
| #include <logging/log.h> |
| LOG_MODULE_REGISTER(LOG_MODULE_NAME); |
| |
| #include <net/net_pkt.h> |
| #include <net/buf.h> |
| #include <net/net_ip.h> |
| #include <net/net_if.h> |
| |
| #include <net/dummy.h> |
| |
| int loopback_dev_init(const struct device *dev) |
| { |
| ARG_UNUSED(dev); |
| |
| return 0; |
| } |
| |
| static void loopback_init(struct net_if *iface) |
| { |
| struct net_if_addr *ifaddr; |
| |
| /* RFC 7042, s.2.1.1. address to use in documentation */ |
| net_if_set_link_addr(iface, "\x00\x00\x5e\x00\x53\xff", 6, |
| NET_LINK_DUMMY); |
| |
| if (IS_ENABLED(CONFIG_NET_IPV4)) { |
| struct in_addr ipv4_loopback = INADDR_LOOPBACK_INIT; |
| |
| ifaddr = net_if_ipv4_addr_add(iface, &ipv4_loopback, |
| NET_ADDR_AUTOCONF, 0); |
| if (!ifaddr) { |
| LOG_ERR("Failed to register IPv4 loopback address"); |
| } |
| } |
| |
| if (IS_ENABLED(CONFIG_NET_IPV6)) { |
| struct in6_addr ipv6_loopback = IN6ADDR_LOOPBACK_INIT; |
| |
| ifaddr = net_if_ipv6_addr_add(iface, &ipv6_loopback, |
| NET_ADDR_AUTOCONF, 0); |
| if (!ifaddr) { |
| LOG_ERR("Failed to register IPv6 loopback address"); |
| } |
| } |
| } |
| |
| static int loopback_send(const struct device *dev, struct net_pkt *pkt) |
| { |
| struct net_pkt *cloned; |
| int res; |
| |
| ARG_UNUSED(dev); |
| |
| if (!pkt->frags) { |
| LOG_ERR("No data to send"); |
| return -ENODATA; |
| } |
| |
| /* We need to swap the IP addresses because otherwise |
| * the packet will be dropped. |
| */ |
| |
| if (net_pkt_family(pkt) == AF_INET6) { |
| struct in6_addr addr; |
| |
| net_ipv6_addr_copy_raw((uint8_t *)&addr, NET_IPV6_HDR(pkt)->src); |
| net_ipv6_addr_copy_raw(NET_IPV6_HDR(pkt)->src, |
| NET_IPV6_HDR(pkt)->dst); |
| net_ipv6_addr_copy_raw(NET_IPV6_HDR(pkt)->dst, (uint8_t *)&addr); |
| } else { |
| struct in_addr addr; |
| |
| net_ipv4_addr_copy_raw((uint8_t *)&addr, NET_IPV4_HDR(pkt)->src); |
| net_ipv4_addr_copy_raw(NET_IPV4_HDR(pkt)->src, |
| NET_IPV4_HDR(pkt)->dst); |
| net_ipv4_addr_copy_raw(NET_IPV4_HDR(pkt)->dst, (uint8_t *)&addr); |
| } |
| |
| /* We should simulate normal driver meaning that if the packet is |
| * properly sent (which is always in this driver), then the packet |
| * must be dropped. This is very much needed for TCP packets where |
| * the packet is reference counted in various stages of sending. |
| */ |
| cloned = net_pkt_clone(pkt, K_MSEC(100)); |
| if (!cloned) { |
| res = -ENOMEM; |
| goto out; |
| } |
| |
| res = net_recv_data(net_pkt_iface(cloned), cloned); |
| if (res < 0) { |
| LOG_ERR("Data receive failed."); |
| } |
| |
| out: |
| /* Let the receiving thread run now */ |
| k_yield(); |
| |
| return res; |
| } |
| |
| static struct dummy_api loopback_api = { |
| .iface_api.init = loopback_init, |
| |
| .send = loopback_send, |
| }; |
| |
| NET_DEVICE_INIT(loopback, "lo", |
| loopback_dev_init, NULL, NULL, NULL, |
| CONFIG_KERNEL_INIT_PRIORITY_DEFAULT, |
| &loopback_api, DUMMY_L2, |
| NET_L2_GET_CTX_TYPE(DUMMY_L2), 536); |