| :orphan: |
| |
| .. _zephyr_3.0: |
| |
| Zephyr 3.0.0 |
| ############ |
| |
| We are pleased to announce the release of Zephyr RTOS version 3.0.0. |
| |
| |
| |
| The following sections provide detailed lists of changes by component. |
| |
| Security Vulnerability Related |
| ****************************** |
| |
| The following CVEs are addressed by this release: |
| |
| More detailed information can be found in: |
| https://docs.zephyrproject.org/latest/security/vulnerabilities.html |
| |
| * CVE-2021-3835: `Zephyr project bug tracker GHSA-fm6v-8625-99jf |
| <https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-fm6v-8625-99jf>`_ |
| |
| * CVE-2021-3861: `Zephyr project bug tracker GHSA-hvfp-w4h8-gxvj |
| <https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-hvfp-w4h8-gxvj>`_ |
| |
| * CVE-2021-3966: `Zephyr project bug tracker GHSA-hfxq-3w6x-fv2m |
| <https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-hfxq-3w6x-fv2m>`_ |
| |
| Known issues |
| ************ |
| |
| You can check all currently known issues by listing them using the GitHub |
| interface and listing all issues with the `bug label |
| <https://github.com/zephyrproject-rtos/zephyr/issues?q=is%3Aissue+is%3Aopen+label%3Abug>`_. |
| |
| API Changes |
| *********** |
| |
| Changes in this release |
| ======================= |
| |
| * Following functions in UART Asynchronous API are using microseconds to represent |
| timeout instead of milliseconds: |
| * :c:func:`uart_tx` |
| * :c:func:`uart_rx_enable` |
| |
| * Replaced custom LwM2M :c:struct:`float32_value` type with a native double type. |
| |
| * Added function for getting status of USB device remote wakeup feature. |
| |
| * Added ``ranges`` and ``dma-ranges`` as invalid property to be used with DT_PROP_LEN() |
| along ``reg`` and ``interrupts``. |
| |
| * The existing :c:func:`crc16` and :c:func:`crc16_ansi` functions have been |
| modified. The former has a new signature. The latter now properly calculates the |
| CRC-16-ANSI checksum. A new function, :c:func:`crc16_reflect`, has been |
| introduced to calculated reflected CRCs. |
| |
| * GATT callbacks ``bt_gatt_..._func_t`` would previously be called with argument |
| ``conn = NULL`` in the event of a disconnect. This was not documented as part |
| of the API. This behavior is changed so the ``conn`` argument is provided as |
| normal when a disconnect occurs. |
| |
| Removed APIs in this release |
| ============================ |
| |
| * The following Kconfig options related to radio front-end modules (FEMs) were |
| removed: |
| |
| * ``CONFIG_BT_CTLR_GPIO_PA`` |
| * ``CONFIG_BT_CTLR_GPIO_PA_PIN`` |
| * ``CONFIG_BT_CTLR_GPIO_PA_POL_INV`` |
| * ``CONFIG_BT_CTLR_GPIO_PA_OFFSET`` |
| * ``CONFIG_BT_CTLR_GPIO_LNA`` |
| * ``CONFIG_BT_CTLR_GPIO_LNA_PIN`` |
| * ``CONFIG_BT_CTLR_GPIO_LNA_POL_INV`` |
| * ``CONFIG_BT_CTLR_GPIO_LNA_OFFSET`` |
| * ``CONFIG_BT_CTLR_FEM_NRF21540`` |
| * ``CONFIG_BT_CTLR_GPIO_PDN_PIN`` |
| * ``CONFIG_BT_CTLR_GPIO_PDN_POL_INV`` |
| * ``CONFIG_BT_CTLR_GPIO_CSN_PIN`` |
| * ``CONFIG_BT_CTLR_GPIO_CSN_POL_INV`` |
| * ``CONFIG_BT_CTLR_GPIO_PDN_CSN_OFFSET`` |
| |
| This FEM configuration is hardware description, and was therefore moved to |
| :ref:`devicetree <dt-guide>`. See the :dtcompatible:`nordic,nrf-radio` |
| devicetree binding's ``fem`` property for information on what to do instead |
| on the Nordic open source controller. |
| |
| * Removed Kconfig option ``CONFIG_USB_UART_CONSOLE``. |
| Option ``CONFIG_USB_UART_CONSOLE`` was only relevant for console driver |
| when CDC ACM UART is used as backend. Since the behavior of the CDC ACM UART |
| is changed so that it more closely mimics the real UART controller, |
| option is no longer necessary. |
| |
| * Removed Kconfig option ``CONFIG_OPENOCD_SUPPORT`` in favor of |
| ``CONFIG_DEBUG_THREAD_INFO``. |
| |
| * Removed ``flash_write_protection_set()`` along with the flash write protection |
| implementation handler. |
| |
| * Removed ``CAN_BUS_UNKNOWN`` and changed the signature of |
| :c:func:`can_get_state` to return an error code instead. |
| |
| * Removed ``DT_CHOSEN_ZEPHYR_CANBUS_LABEL`` in favor of utilizing |
| :c:macro:`DEVICE_DT_GET`. |
| |
| * Removed ``CONFIG_LOG_MINIMAL``. Use ``CONFIG_LOG_MODE_MINIMAL`` instead. |
| |
| * STM32 clock_control driver configuration was moved from Kconfig to :ref:`devicetree <dt-guide>`. |
| See the :dtcompatible:`st,stm32-rcc` devicetree binding for more information. |
| As a consequence, following Kconfig symbols were removed: |
| |
| * ``CONFIG_CLOCK_STM32_SYSCLK_SRC_HSE`` |
| * ``CONFIG_CLOCK_STM32_SYSCLK_SRC_HSI`` |
| * ``CONFIG_CLOCK_STM32_SYSCLK_SRC_MSI`` |
| * ``CONFIG_CLOCK_STM32_SYSCLK_SRC_PLL`` |
| * ``CONFIG_CLOCK_STM32_SYSCLK_SRC_CSI`` |
| * ``CONFIG_CLOCK_STM32_HSE_BYPASS`` |
| * ``CONFIG_CLOCK_STM32_MSI_RANGE`` |
| * ``CONFIG_CLOCK_STM32_PLL_SRC_MSI`` |
| * ``CONFIG_CLOCK_STM32_PLL_SRC_HSI`` |
| * ``CONFIG_CLOCK_STM32_PLL_SRC_HSE`` |
| * ``CONFIG_CLOCK_STM32_PLL_SRC_PLL2`` |
| * ``CONFIG_CLOCK_STM32_PLL_SRC_CSI`` |
| * ``CONFIG_CLOCK_STM32_AHB_PRESCALER`` |
| * ``CONFIG_CLOCK_STM32_APB1_PRESCALER`` |
| * ``CONFIG_CLOCK_STM32_APB2_PRESCALER`` |
| * ``CONFIG_CLOCK_STM32_CPU1_PRESCALER`` |
| * ``CONFIG_CLOCK_STM32_CPU2_PRESCALER`` |
| * ``CONFIG_CLOCK_STM32_AHB3_PRESCALER`` |
| * ``CONFIG_CLOCK_STM32_AHB4_PRESCALER`` |
| * ``CONFIG_CLOCK_STM32_PLL_PREDIV`` |
| * ``CONFIG_CLOCK_STM32_PLL_PREDIV1`` |
| * ``CONFIG_CLOCK_STM32_PLL_MULTIPLIER`` |
| * ``CONFIG_CLOCK_STM32_PLL_XTPRE`` |
| * ``CONFIG_CLOCK_STM32_PLL_M_DIVISOR`` |
| * ``CONFIG_CLOCK_STM32_PLL_N_MULTIPLIER`` |
| * ``CONFIG_CLOCK_STM32_PLL_P_DIVISOR`` |
| * ``CONFIG_CLOCK_STM32_PLL_Q_DIVISOR`` |
| * ``CONFIG_CLOCK_STM32_PLL_R_DIVISOR`` |
| * ``CONFIG_CLOCK_STM32_LSE`` |
| * ``CONFIG_CLOCK_STM32_HSI_DIVISOR`` |
| * ``CONFIG_CLOCK_STM32_D1CPRE`` |
| * ``CONFIG_CLOCK_STM32_HPRE`` |
| * ``CONFIG_CLOCK_STM32_D2PPRE1`` |
| * ``CONFIG_CLOCK_STM32_D2PPRE2`` |
| * ``CONFIG_CLOCK_STM32_D1PPRE`` |
| * ``CONFIG_CLOCK_STM32_D3PPRE`` |
| * ``CONFIG_CLOCK_STM32_PLL3_ENABLE`` |
| * ``CONFIG_CLOCK_STM32_PLL3_M_DIVISOR`` |
| * ``CONFIG_CLOCK_STM32_PLL3_N_MULTIPLIER`` |
| * ``CONFIG_CLOCK_STM32_PLL3_P_ENABLE`` |
| * ``CONFIG_CLOCK_STM32_PLL3_P_DIVISOR`` |
| * ``CONFIG_CLOCK_STM32_PLL3_Q_ENABLE`` |
| * ``CONFIG_CLOCK_STM32_PLL3_Q_DIVISOR`` |
| * ``CONFIG_CLOCK_STM32_PLL3_R_ENABLE`` |
| * ``CONFIG_CLOCK_STM32_PLL3_R_DIVISOR`` |
| * ``CONFIG_CLOCK_STM32_PLL_DIVISOR`` |
| * ``CONFIG_CLOCK_STM32_MSI_PLL_MODE`` |
| |
| Deprecated in this release |
| ========================== |
| |
| * Removed ``<power/reboot.h>`` and ``<power/power.h>`` deprecated headers. |
| ``<sys/reboot.h>`` and ``<pm/pm.h>`` should be used instead. |
| * :c:macro:`USBD_CFG_DATA_DEFINE` is deprecated in favor of utilizing |
| :c:macro:`USBD_DEFINE_CFG_DATA` |
| * :c:macro:`SYS_DEVICE_DEFINE` is deprecated in favor of utilizing |
| :c:macro:`SYS_INIT`. |
| * :c:func:`device_usable_check` is deprecated in favor of utilizing |
| :c:func:`device_is_ready`. |
| * Custom CAN return codes (:c:macro:`CAN_TX_OK`, :c:macro:`CAN_TX_ERR`, |
| :c:macro:`CAN_TX_ARB_LOST`, :c:macro:`CAN_TX_BUS_OFF`, |
| :c:macro:`CAN_TX_UNKNOWN`, :c:macro:`CAN_TX_EINVAL`, |
| :c:macro:`CAN_NO_FREE_FILTER`, and :c:macro:`CAN_TIMEOUT`) are deprecated in |
| favor of utilizing standard errno error codes. |
| * :c:func:`can_configure` is deprecated in favor of utilizing |
| :c:func:`can_set_bitrate` and :c:func:`can_set_mode`. |
| * :c:func:`can_attach_workq` is deprecated in favor of utilizing |
| :c:func:`can_add_rx_filter_msgq` and :c:func:`k_work_poll_submit`. |
| * :c:func:`can_attach_isr` is deprecated and replaced by |
| :c:func:`can_add_rx_filter`. |
| * :c:macro:`CAN_DEFINE_MSGQ` is deprecated and replaced by |
| :c:macro:`CAN_MSGQ_DEFINE`. |
| * :c:func:`can_attach_msgq` is deprecated and replaced by |
| :c:func:`can_add_rx_filter_msgq`. |
| * :c:func:`can_detach` is deprecated and replaced by |
| :c:func:`can_remove_rx_filter`. |
| * :c:func:`can_register_state_change_isr` is deprecated and replaced by |
| :c:func:`can_set_state_change_callback`. |
| * :c:func:`can_write` is deprecated in favor of utilizing :c:func:`can_send`. |
| |
| Stable API changes in this release |
| ================================== |
| |
| New APIs in this release |
| ======================== |
| |
| * Serial |
| |
| * Added new APIs to support datum wider than 8-bit. |
| |
| * :kconfig:option:`CONFIG_UART_WIDE_DATA` is added to enable this new APIs. |
| |
| * Following functions, mirroring similar functions for 8-bit datum, |
| are added: |
| |
| * :c:func:`uart_tx_u16` to send a given number of datum from buffer. |
| |
| * :c:func:`uart_rx_enable_u16` to start receiving data. |
| |
| * :c:func:`uart_rx_buf_rsp_u16` to set buffer for receiving data |
| in response to ``UART_RX_BUF_REQUEST`` event. |
| |
| * :c:func:`uart_poll_in_u16` to poll for input. |
| |
| * :c:func:`uart_poll_out_u16` to output datum in polling mode. |
| |
| * :c:func:`uart_fifo_fill_u16` to fill FIFO with data. |
| |
| * :c:func:`uart_fifo_read_u16` to read data from FIFO. |
| |
| * Devicetree |
| |
| * Added new Devicetree helpers: |
| |
| * :c:macro:`DT_INST_ENUM_IDX` |
| * :c:macro:`DT_INST_ENUM_IDX_OR` |
| * :c:macro:`DT_INST_PARENT` |
| |
| * New :ref:`devicetree-ranges-property` APIs |
| |
| * Removed: ``DT_CHOSEN_ZEPHYR_CANBUS_LABEL``; use |
| ``DEVICE_DT_GET(DT_CHOSEN(zephyr_canbus))`` to get the device instead, and |
| read the name from the device structure if needed. |
| |
| * Removed deprecated macros: |
| |
| * ``DT_CLOCKS_LABEL_BY_IDX`` |
| * ``DT_CLOCKS_LABEL`` |
| * ``DT_INST_CLOCKS_LABEL_BY_IDX`` |
| * ``DT_INST_CLOCKS_LABEL_BY_NAME`` |
| * ``DT_INST_CLOCKS_LABEL`` |
| * ``DT_PWMS_LABEL_BY_IDX`` |
| * ``DT_PWMS_LABEL_BY_NAME`` |
| * ``DT_PWMS_LABEL`` |
| * ``DT_INST_PWMS_LABEL_BY_IDX`` |
| * ``DT_INST_PWMS_LABEL_BY_NAME`` |
| * ``DT_INST_PWMS_LABEL`` |
| * ``DT_IO_CHANNELS_LABEL_BY_IDX`` |
| * ``DT_IO_CHANNELS_LABEL_BY_NAME`` |
| * ``DT_IO_CHANNELS_LABEL`` |
| * ``DT_INST_IO_CHANNELS_LABEL_BY_IDX`` |
| * ``DT_INST_IO_CHANNELS_LABEL_BY_NAME`` |
| * ``DT_INST_IO_CHANNELS_LABEL`` |
| * ``DT_DMAS_LABEL_BY_IDX`` |
| * ``DT_INST_DMAS_LABEL_BY_IDX`` |
| * ``DT_DMAS_LABEL_BY_NAME`` |
| * ``DT_INST_DMAS_LABEL_BY_NAME`` |
| * ``DT_ENUM_TOKEN`` |
| * ``DT_ENUM_UPPER_TOKEN`` |
| |
| |
| * CAN |
| |
| * Added :c:func:`can_get_max_filters` for retrieving the maximum number of RX |
| filters support by a CAN controller device. |
| |
| Kernel |
| ****** |
| |
| * Added support for event objects. Threads may wait on an event object such |
| that any events posted to that event object may wake a waiting thread if the |
| posting satisfies the waiting threads' event conditions. |
| * Extended CPU runtime stats to track current, total, peak and average usage |
| (as bounded by the scheduling of the idle thread). This permits a developer |
| to obtain more system information if desired to tune the system. |
| * Added "thread_usage" API for thread runtime cycle monitoring. |
| * Fixed timeout issues when SYSTEM_CLOCK_SLOPPY_IDLE is configured. |
| |
| Architectures |
| ************* |
| |
| * ARM |
| |
| * AARCH32 |
| |
| * Converted inline assembler calls to using CMSIS provided functions for |
| :c:func:`arm_core_mpu_enable` and :c:func:`arm_core_mpu_disable`. |
| * Replaced Kconfig `CONFIG_CPU_CORTEX_R` with `CONFIG_ARMV7_R` to enable |
| differentiation between v7 and v8 Cortex-R. |
| * Updated the Cortex-R syscall behavior to match that of the Cortex-M. |
| |
| * AARCH64 |
| |
| * Fixed out-of-bounds error when large number of IRQs are enabled and ignore |
| special INTDs between 1020 and 1023 |
| * Added MPU code for ARMv8R |
| * Various MMU fixes |
| * Added nocache memory segment support |
| * Added Xen hypercall interface for ARM64 |
| * Fixed race condition on SMP scheduling code. |
| |
| * Xtensa |
| |
| * Introduced a mechanism to automatically figure out which scratch registers |
| are used for internal code, instead of hard-coding. This is to accommodate |
| the configurability of the architecture where some registers may exist in |
| one SoC but not on another one. |
| |
| * Added coredump support for Xtensa. |
| |
| * Added GDB stub support for Xtensa. |
| |
| Bluetooth |
| ********* |
| |
| * Updated all experimental features in Bluetooth to use the new ``EXPERIMENTAL`` |
| selectable Kconfig option |
| * Bluetooth now uses logging v2 as with the rest of the tree |
| |
| * Audio |
| |
| * Implemented the Content Control ID module (CCID) |
| * Added support for the Coordinated Set Identification Service (CSIS) |
| * Added a Temporary Object Transfer client implementation |
| * Added a Media Control client implementation |
| * Added a Media Control Server implementation |
| * Implemented the Media Proxy API |
| * Implemented CIG reconfiguration and state handling |
| * Updated the CSIS API for both server and client |
| * Added Basic Audio Profile (BAP) unicast and broadcast server support |
| |
| * Direction Finding |
| |
| * Added support for filtering of Periodic Advertising Sync by CTE type |
| * Added additional handling logic for Periodic Advertising Sync Establishemnt |
| * Added CTE RX, sampling and IQ report handling in DF connected mode |
| * Added support for CTE configuration in connected mode |
| * Direction Finding connection mode now uses the newly refactored LLCP |
| implementation |
| |
| * Host |
| |
| * The :kconfig:option:`CONFIG_BT_SETTINGS_CCC_STORE_ON_WRITE` is now enabled |
| by default. Storing CCC right after it's written reduces risk of |
| inconsistency of CCC values between bonded peers |
| * Added support for L2CAP channel reconfiguration. |
| * Added support for SMP error code 0xF, where the peer rejects a distributed |
| key |
| * Added ``bt_gatt_service_is_registered()`` to verify sevice registration |
| * Added create an delete procedures to the Object Transfer Service |
| implementation |
| * Added support for reassembling extended advertising reports |
| * Added support for reassembling periodic advertising reports |
| * Added support for setting long periodic advertising data |
| * Implemented GATT Long Writes reassembly before forwarding them up to the |
| application |
| * The GATT Server DB hash calculation logic has been corrected |
| * Added storing of the CCC data upon paring complete |
| |
| * Mesh |
| |
| * Split out the Proxy services, which can now be compiled out |
| * Added an option to call back on every retransmission |
| * Added support for multiple Advertising Sets |
| * Refactored he Config Client and Health Client API to allow async use |
| |
| * Controller |
| |
| * Added support for a brand new implementation of LL Control Procedures |
| (LLCP), currently disabled by default, can be enabled using the |
| ``CONFIG_BT_LL_SW_LLCP_IMPL`` Kconfig choice |
| * Added initial support for Broadcast Isochronous Groups (BIG) |
| * Integrated ISO Sync RX datapath |
| * Transitioned FEM configurations (PA/LNA) from Kconfig to Devicetree |
| * Updated the supported Bluetooth HCI version to 5.3 |
| * Added support for Periodic Advertiser List |
| * Added support for Periodic Advertising Synchronization Receive Enable |
| * Added support for filter access list filtering for extended scanning |
| * Added support for Advertising Extensions dynamic TX power control |
| * Added handling of direct address type in extended adv reports |
| * Implemented auxiliary PDU device address matching |
| * Implemented fragmentation of extended advertising reports over HCI |
| * Implemented Extended Advertising and Scan report back-to-back chaining |
| * Implemented Periodic Advertising ADI support,including duplicate filtering |
| * Introduced a new preferred central connection spacing feature |
| |
| |
| * HCI Driver |
| |
| * Added support for a new optional ``setup()`` function for vendor-specific |
| setup code required to bring up the controller |
| * Fixed DTM mode not being reset correctly with the HCI Reset command |
| * Limited the maximum ACL TX buffer size to 251 bytes |
| |
| Boards & SoC Support |
| ******************** |
| |
| * Added support for these SoC series: |
| |
| * GigaDevice GD32VF103, GD32F3X0, GD32F403 and GD32F450. |
| * Raspberry Pi RP2040 |
| * NXP i.MXRT595, i.MX8MQ, i.MX8MP |
| |
| * Removed support for these SoC series: |
| |
| |
| * Made these changes in other SoC series: |
| |
| * stm32h7: Added SMPS support |
| * stm32u5: Enabled TF-M |
| |
| * Changes for ARC boards: |
| |
| |
| * Added support for these ARM boards: |
| |
| * GigaDevice GD32F350R-EVAL |
| * GigaDevice GD32F403Z-EVAL |
| * GigaDevice GD32F450I-EVAL |
| * OLIMEX-STM32-H405 |
| * NXP MIMXRT595-EVK |
| * NXP MIMX8MQ-EVK |
| * NXP MIMX8MP-EVK |
| * Raspberry Pi Pico |
| * ST Nucleo G031K8 |
| * ST Nucleo H7A3ZI Q |
| * ST STM32G081B Evaluation |
| |
| * Added support for these ARM64 boards: |
| |
| * Intel SoC FPGA Agilex development kit |
| |
| * Removed support for these ARM boards: |
| |
| |
| * Removed support for these X86 boards: |
| |
| * Added support for these RISC-V boards: |
| |
| * GigaDevice GD32VF103V-EVAL |
| * Sipeed Longan Nano and Nano Lite |
| |
| * Made these changes in other boards: |
| |
| * sam_e70_xplained: Added support for CAN-FD driver |
| * mimxrt11xx: Added SOC level power management |
| * mimxrt11xx: Added support for GPT timer as OS timer |
| |
| |
| * Added support for these following shields: |
| |
| |
| Drivers and Sensors |
| ******************* |
| |
| * ADC |
| |
| * Added support for stm32u5 series |
| * stm32: Added shared IRQ support |
| |
| * CAN |
| |
| * Renamed ``zephyr,can-primary`` chosen property to ``zephyr,canbus``. |
| * Added :c:macro:`CAN_STATE_ERROR_WARNING` CAN controller state. |
| * Added Atmel SAM Bosch M_CAN CAN-FD driver. |
| * Added NXP LPCXpresso Bosch M_CAN CAN-FD driver. |
| * Added ST STM32H7 Bosch M_CAN CAN-FD driver. |
| * Rework transmission error handling the NXP FlexCAN driver to automatically |
| retry transmission in case or arbitration lost or missing acknowledge and |
| to fail early in :c:func:`can_send` if in :c:macro:`CAN_STATE_BUS_OFF`. |
| * Added support for disabling automatic retransmissions ("one-shot" mode") to |
| the ST STM32 bxCAN driver. |
| * Converted the emulated CAN loopback driver to be configured through |
| devicetree instead of Kconfig. |
| |
| * Counter |
| |
| * stm32: Added timer based counter driver (stm32f4 only for now). |
| |
| * DAC |
| |
| * Added support for GigaDevice GD32 SoCs |
| * Added support for stm32u5 series |
| |
| * Disk |
| |
| * stm32 sdmmc: Converted from polling to IT driven mode and added Hardware |
| Flow Control option |
| |
| * DMA |
| |
| * Added support for suspending and resuming transfers |
| * Added support for SoCs with DMA between application and embedded |
| processors, allows for transfer directions to be identified as such. |
| * mimxrt11xx: Added support for DMA |
| |
| * EEPROM |
| |
| * Added support for the EEPROM present in the TMP116 digital temperature |
| sensor. |
| |
| * Entropy |
| |
| * Added support for stm32u5 series |
| |
| * Ethernet |
| |
| * Added support for Synopsys DesignWare MAC driver with implementation |
| on stm32h7 series. |
| * stm32 (hal based): Added promiscuous mode support |
| * stm32 (hal based): Added PTP L2 timestamping support |
| * mimxrt11xx: Added support for 10/100M ENET |
| |
| * Flash |
| |
| * stm32g0: Added Dual Bank support |
| * stm32_qspi: General enhancement (Generation of the reset pulse for SPI-NOR memory, |
| Usage of 4IO for read / write (4READ/4PP), Support for different QSPI banks, |
| Support for 4B addressing on spi-nor) |
| |
| * ite_i8xxx2: The driver has been reworked so the write/erase protection |
| management has been moved to implementations of the flash_write() |
| and the flash_erase() calls. The driver was keeping the write protection API |
| which was designed to be removed since 2.6 release. |
| |
| |
| * GPIO |
| |
| * Added driver for GigaDevice GD32 SoCs |
| |
| * I2C |
| |
| * Added driver for GigaDevice GD32 SoCs |
| * Added stats functionality to all drivers |
| * Added I2C driver for Renesas R-Car platform |
| * Added support for TCA9548A I2C switch |
| |
| * I2S |
| |
| * mimxrt10xx: Added support for I2S |
| * mimxrt11xx: Added support for I2S |
| |
| * Interrupt Controller |
| |
| * Added ECLIC driver for GigaDevice RISC-V GD32 SoCs |
| * Added EXTI driver for GigaDevice GD32 SoCs |
| |
| * MBOX |
| |
| * Added MBOX NRFX IPC driver |
| |
| * MEMC |
| |
| * Added support for stm32f7 series |
| |
| * Pin control |
| |
| * Introduced a new state-based pin control (``pinctrl``) API inspired by the |
| Linux design principles. The ``pinctrl`` API will replace the existing |
| pinmux API, so all platforms using pinmux are encouraged to migrate. A |
| detailed guide with design principles and implementation guidelines can be |
| found in :ref:`pinctrl-guide`. |
| * Platforms already supporting the ``pinctrl`` API: |
| |
| * GigaDevice GD32 |
| * Nordic (preliminary support) |
| * Renesas R-Car |
| * STM32 |
| |
| * PWM |
| |
| * stm32: DT bindings: `st,prescaler` property was moved from pwm |
| to parent timer node. |
| * stm32: Implemented PWM capture API |
| * Added driver for GigaDevice GD32 SoCs. Only PWM output is supported. |
| * mimxrt1021: Added support for PWM |
| |
| * Sensor |
| |
| * Added Invensense MPU9250 9-axis IMU driver. |
| * Added ITE IT8XX2 tachometer driver. |
| * Added STM L5 die temperature driver. |
| * Added STM I3G4250D gyroscope driver. |
| * Added TI TMP108 driver. |
| * Added Winsen MH-Z19B CO2 driver. |
| * Constified device config access in sbs_gauge and LM75 drivers. |
| * Dropped DEV_DATA/DEV_CFG usage from various drivers. |
| * Moved ODR and range properties from Kconfig to devicetree in various STM |
| drivers. |
| * Refactored INA230 driver to add support for INA237 variant. |
| * Refactored various drivers to use I2C/SPI/GPIO DT APIs. |
| * Enabled level triggered interrupts in LIS2DH driver. |
| * Fixed TMP112 driver to avoid I2C burst write portability issues. |
| * Fixed SENSOR_DEG2RAD_DOUBLE macro in LSM6DS0 driver. |
| * Fixed gain factor in LSM303DLHC magnetometer driver. |
| |
| * Serial |
| |
| * stm32: Implemented half-duplex option. |
| * Added driver for GigaDevice GD32 SoCs. Polling and interrupt driven modes |
| are supported. |
| |
| * SPI |
| |
| * stm32: Implemented Frame format option (TI vs Motorola). |
| * mimxrt11xx: Added support for Flexspi |
| |
| * Timer |
| |
| * stm32 lptim: Added support for stm32h7 |
| |
| * USB |
| |
| * Added support for stm32u5 series (OTG full speed) |
| |
| * Watchdog |
| |
| * Added support for stm32u5 series (Independent and Window) |
| * mimxrt1170: Added support for watchdog on CM7 |
| |
| |
| Networking |
| ********** |
| |
| * CoAP: |
| |
| * Refactored ``coap_client``/``coap_server`` samples to make better use of |
| observe APIs. |
| * Added PATCH, iPATCH and FETCH methods. |
| * A few fixes for the block transfer handling. |
| |
| * DNS: |
| |
| * Make mdns and llmnr responders join their multicast groups. |
| * Added support for mdns/dns_sd service type enumeration. |
| |
| * ICMPv6: |
| |
| * Added support for Route Information option processing. |
| |
| * IPv4: |
| |
| * Add IPv4 support to multicast monitor. |
| |
| * LwM2M: |
| |
| * Added a parameter to forcefully close the LwM2M session to |
| :c:func:`lwm2m_rd_client_stop` function. |
| * Replaced custom ``float32_value_t`` type with double. |
| * Added :kconfig:option:`LWM2M_FIRMWARE_PORT_NONSECURE`/ |
| :kconfig:option:`LWM2M_FIRMWARE_PORT_SECURE` options, which allow to |
| specify a custom port or firmware update. |
| * Added :c:func:`lwm2m_update_device_service_period` API function. |
| * Added observe callback for observe and notification events. |
| * Added support for multiple LwM2M Firmware Update object instances. |
| * Improved error handling in LwM2M content writers. |
| * Added unit tests for LwM2M content writers. |
| * Implemented LwM2M Security, Server, Connection Monitor objects in version 1.1. |
| * Multiple minor bugfixes in the LwM2M stack. |
| * Added support for the following objects: |
| |
| * LWM2M Software Management (ID 9) |
| * LwM2M Gateway (ID 25) |
| * IPSO Current (ID 3317) |
| * uCIFI Battery (ID 3411) |
| * IPSO Filling level (ID 3435) |
| |
| * Misc: |
| |
| * gptp: clock sync ratio as double, not float |
| * Added support for route lifetime and preference. |
| * Refactored various packed structures across the networking stack, to avoid |
| unaliged access warnings from gcc. |
| * Added automatic loopback addresses registration to loopback interface. |
| * Fixed source address selection for ARP. |
| * Allow to implement a custom IEEE802154 L2 on top of existing drivers. |
| * Introduced a network packet filtering framework. |
| |
| * MQTT: |
| |
| * Fixed incomplete :c:func:`zsock_sendmsg` writes handling. |
| * Fixed :c:func:`zsock_setsockopt` error handling in SOCKS5 transport. |
| |
| * OpenThread: |
| |
| * Updated OpenThread revision up to commit ``ce77ab3c1d7ad91b284615112ae38c08527bf73e``. |
| * Fixed an overflow bug in the alarm implementation for Zephyr. |
| * Added crypto backend based on PSA API. |
| * Allow to store OpenThread settings in RAM. |
| |
| * Socket: |
| |
| * Fixed :c:func:`zsock_sendmsg` when payload size exceeded network MTU. |
| * Added socket processing priority. |
| * Fixed possible crash in :c:func:`zsock_getaddrinfo` when DNS callback is |
| delayed. |
| |
| * Telnet: |
| |
| * Fixed handling of multiple commands in a single packet. |
| * Enabled command handling by default. |
| |
| * TCP: |
| |
| * Added support for sending our MSS to peer. |
| * Fixed packet sending to local addresses. |
| * Fixed possible deadlock between TCP and socket layer, when connection close |
| is initiated from both sides. |
| * Multiple other minor bugfixes and improvements in the TCP implementation. |
| |
| * TLS: |
| |
| * Added support for ``TLS_CERT_NOCOPY`` socket option, which allows to |
| optimise mbed TLS heap usage. |
| * Fixed ``POLLHUP`` detection when underlying TCP connection is closed. |
| * Fixed mbedtls session reset on handshake errors. |
| |
| USB |
| *** |
| |
| |
| Build and Infrastructure |
| ************************ |
| |
| * Build system |
| |
| * New CMake extension functions: |
| |
| * ``dt_alias()`` |
| * ``target_sources_if_dt_node()`` |
| |
| * The following CMake extension functions now handle devicetree aliases: |
| |
| * ``dt_node_exists()`` |
| * ``dt_node_has_status()`` |
| * ``dt_prop()`` |
| * ``dt_num_regs()`` |
| * ``dt_reg_addr()`` |
| * ``dt_reg_size()`` |
| |
| * Devicetree |
| |
| * Support for the devicetree compatible ``ti,ina23x`` has been removed. |
| Instead, use :dtcompatible:`ti,ina230` or :dtcompatible:`ti,ina237`. |
| |
| * West (extensions) |
| |
| * Added support for gd32isp runner |
| |
| |
| Libraries / Subsystems |
| ********************** |
| |
| * Management |
| |
| * Fixed the mcumgr SMP protocol over serial not adding the length of the CRC16 to packet length. |
| * Kconfig option OS_MGMT_TASKSTAT is now disabled by default. |
| |
| * Power management |
| |
| * Power management resources are now manually allocated by devices using |
| :c:macro:`PM_DEVICE_DEFINE`, :c:macro:`PM_DEVICE_DT_DEFINE` or |
| :c:macro:`PM_DEVICE_DT_INST_DEFINE`. Device instantiation macros take now |
| a reference to the allocated resources. The reference can be obtained using |
| :c:macro:`PM_DEVICE_GET`, :c:macro:`PM_DEVICE_DT_GET` or |
| :c:macro:`PM_DEVICE_DT_INST_GET`. Thanks to this change, devices not |
| implementing support for device power management will not use unnecessary |
| memory. |
| * Device runtime power management API error handling has been simplified. |
| * :c:func:`pm_device_runtime_enable` suspends the target device if not already |
| suspended. This change makes sure device state is always kept in a |
| consistent state. |
| * Improved PM states Devicetree macros naming |
| * Added a new API call :c:func:`pm_state_cpu_get_all` to obtain information |
| about CPU power states. |
| * ``pm/device.h`` is no longer included by ``device.h``, since the device API |
| no longer depends on the PM API. |
| * Added support for power domains. Power domains are implemented as |
| simple devices and use the existent PM API for resume and suspend, devices |
| under a power domain are notified when it becomes active or suspended. |
| * Added a new action :c:enum:`PM_DEVICE_ACTION_TURN_ON`. This action |
| is used by power domains to notify devices when it becomes active. |
| * Added new API (:c:func:`pm_device_state_lock`, |
| :c:func:`pm_device_state_unlock` and |
| :c:func:`pm_device_state_is_locked`) to lock a device pm |
| state. When the device has its state locked, the kernel will no |
| longer suspend and resume devices when the system goes to sleep |
| and device runtime power management operations will fail. |
| * :c:func:`pm_device_state_set` is deprecated in favor of utilizing |
| :c:func:`pm_device_action_run`. |
| * Proper multicore support. Devices are suspended only when the last |
| active CPU. A cpu parameter was added to Policy and SoC interfaces. |
| |
| * Tracing |
| |
| * Support all syscalls being traced using the python syscall generator to |
| introduce a tracing hook call. |
| |
| * IPC |
| |
| * Added IPC service support and RPMsg with static VRINGs backend |
| |
| HALs |
| **** |
| |
| * STM32 |
| |
| * stm32cube/stm32wb and its lib: Upgraded to version V1.12.1 |
| * stm32cube/stm32mp1: Upgraded to version V1.5.0 |
| * stm32cube/stm32u5: Upgraded to version V1.0.2 |
| |
| * Added `GigaDevice HAL module |
| <https://github.com/zephyrproject-rtos/hal_gigadevice>`_ |
| |
| MCUboot |
| ******* |
| |
| * Fixed serial recovery skipping on nrf5340. |
| * Fixed issue which caused that progressive's erase feature was off although was |
| selected by Kconfig (introduced by #42c985cead). |
| * Added check of reset address in incoming image validation phase, see |
| ``CONFIG_MCUBOOT_VERIFY_IMG_ADDRESS``. |
| * Allow image header bigger than 1 KB for encrypted images. |
| * Support Mbed TLS 3.0. |
| * stm32: watchdog support. |
| * many documentation improvements. |
| * Fixed deadlock on cryptolib selectors in Kconfig. |
| * Fixed support for single application slot with serial recovery. |
| * Added various hooks to be able to change how image data is accessed, see |
| ``CONFIG_BOOT_IMAGE_ACCESS_HOOKS``. |
| * Added custom commands support in serial recovery (PERUSER_MGMT_GROUP): storage |
| erase ``CONFIG_BOOT_MGMT_CUSTOM_STORAGE_ERASE``, custom image status |
| ``CONFIG_BOOT_MGMT_CUSTOM_IMG_LIST``. |
| * Added support for direct image upload, see |
| ``CONFIG_MCUBOOT_SERIAL_DIRECT_IMAGE_UPLOAD`` in serial recovery. |
| |
| Trusted Firmware-m |
| ****************** |
| |
| * Updated TF-M to 1.5.0 release, with a handful of additional cherry-picked |
| commits. |
| |
| Documentation |
| ************* |
| |
| * A new theme is used by the Doxygen HTML pages. It is based on |
| `doxygen-awesome-css <https://github.com/jothepro/doxygen-awesome-css>`_ |
| theme. |
| |
| Tests and Samples |
| ***************** |
| |
| * Drivers: clock_control: Added test suite for stm32 (u5, h7). |
| |
| Issue Related Items |
| ******************* |
| |
| These GitHub issues were addressed since the previous 2.7.0 tagged |
| release: |
| |
| * :github:`42973` - Zephyr-sdkConfig.cmake file not found |
| * :github:`42961` - Bluetooth: periodic_sync sample never executes .recv callback |
| * :github:`42942` - sizeof(struct sockaddr_storage) is smaller than sizeof(struct sockaddr_in6) |
| * :github:`42862` - Bluetooth: L2CAP: Security check on l2cap request is wrong |
| * :github:`42816` - samples: Bluetooth: df: DF samples build fail |
| * :github:`42794` - samples: Bluetooth: df: Wrong periodic sync termination handling in direction_finding_connectionless_rx sample |
| * :github:`42793` - net_socket: mimxrt1170_evk_cm7: build failure |
| * :github:`42778` - bluetooth: autopts: can't start on the board |
| * :github:`42759` - armv8 qemu_cortex_a53 bug(gdb) on official sample |
| * :github:`42756` - mec15xxevb_assy6853: ringbuffer testsuite failing once due to a timeout randomly when run multiple times. |
| * :github:`42746` - echo_server and echo_client sample code builds fail for native_posix_64 |
| * :github:`42735` - Bluetooth: Host: df: Uninitialized variable used to assign length of antenna identifiers |
| * :github:`42693` - Bluetooth: DF connectionless TX sample fails to build if CONFIG_BT_CTLR_DF_SCAN_CTE_RX is disabled |
| * :github:`42690` - sample.bootloader.mcuboot.serial_recovery fails to compile |
| * :github:`42687` - [v 1.13 ] HID is not connecting to intel 7265 Bluetooth Module |
| * :github:`42665` - tests: kernel.common.context: test failure on imxrt series platform |
| * :github:`42648` - Setting long advertising data does not work |
| * :github:`42627` - Hardfault regression on 90 tests on CM0+ STM32 boards introduced by #39963 Cortex-R mpu fix on 90 tests |
| * :github:`42615` - [v2.7.2] Bluetooth: Controller: Missing ticks slot offset calculation in Periodic Advertising event scheduling |
| * :github:`42608` - bsim_test_mesh: pb_adv_reprovision.sh fails after commit to prevent multiple arguments in logging |
| * :github:`42604` - doc: broken CONFIG_GPIO link in https://docs.zephyrproject.org/latest/reference/peripherals/gpio.html |
| * :github:`42602` - I2C scan writes 0 bytes |
| * :github:`42588` - lsm6dso |
| * :github:`42586` - Net buffer macros rely on GCC extension |
| * :github:`42585' - 3.0.0-rc1: warning: LOG_STRDUP_MAX_STRING was assigned the value '100` but got the value '' |
| * :github:`42581` - include: drivers: clock_control: stm32 incorrect DT_PROP is used for 'xtpre' |
| * :github:`42573` - docs: sphinx-build issue, zephyr conf.py issue or something else? |
| * :github:`42556` - frdm_k64f: samples/subsys/modbus are failing with a timeout. |
| * :github:`42555` - mimxrt1050_evk: samples/subsys/task_wdt is failing with control thread getting stuck |
| * :github:`42502` - Unable to add a specific syscon driver out-of-tree |
| * :github:`42499` - mec15xxevb_assy6853: boards.mec15xxevb_assy6853.i2c.i2c_pca95xx test failed. |
| * :github:`42477` - Linker scripts not working properly on xtensa |
| * :github:`42462` - logging: syst/v2: hang or crash if log contains string arguments |
| * :github:`42435` - NXP RT1170/1160 base address error for SAI4 in devicetree |
| * :github:`42417` - tests drivers flash on stm32 qspi controller |
| * :github:`42414` - twister: testcases skipped by ztest_test_skip() have reason "Unknown" in report |
| * :github:`42411` - CLion CMake error while opening nRF-Connect-SDK project |
| * :github:`42403` - 'crc16_ansi()' isn't CRC-16-ANSI |
| * :github:`42397` - Direction finding nrf5340: uninitialized memory is passed to the callback |
| * :github:`42396` - ztest: weak test_main() is promoted over given testsuite's test_main() if the testsuite uses own library |
| * :github:`42392` - Openocd Thread awareness broken on 3.0 |
| * :github:`42385` - STM32: Entropy : health test config & magic never used |
| * :github:`42380` - USDHC driver encounters usage fault during frequency setting |
| * :github:`42373` - add k_spin_lock() to doxygen prior to v3.0 release |
| * :github:`42367` - stm32wb: BLE connections not working |
| * :github:`42361` - OpenOCD flashing not working on cc1352r1_launchxl/cc26x2r1_launchxl |
| * :github:`42358` - net: lwm2m: client context accessed after being invalidated in lwm2m_rd_client_stop() |
| * :github:`42353` - LwM2M not pass official LightweightM2M-1.1-int-256 and stack enter dead lock |
| * :github:`42323` - lwm2m_engine: Error when enabling debug log because of uninitialized variable 'from_addr' |
| * :github:`42308` - pm: Force shutdown has no effect |
| * :github:`42299` - spi: nRF HAL driver asserts when PM is used |
| * :github:`42292` - Compilation failed: Driver MPU6050 |
| * :github:`42279` - The pthreads are not working on user space. ARM64 cortex_a53 but generic requirement. |
| * :github:`42278` - USB CDC-ACM non-functional after host reboot |
| * :github:`42272` - doc: "Building on Linux without the Zephyr SDK" does not describe how to actually do it |
| * :github:`42269` - impossible to run west flash. NoneType error |
| * :github:`42228` - hal_stm32: Wrong symbol definition |
| * :github:`42227` - Teensy41 support SDHC - Storage init Error |
| * :github:`42218` - stm32wl: Issue when disabling gpio interrupt |
| * :github:`42214` - drivers: uart_nrfx_uarte: Cannot start another reception after reception is complete |
| * :github:`42208` - tests/subsys/logging/log_api/ fails qemu_leon3 if ptr_in_rodata() is enabled for SPARC |
| * :github:`42205` - drivers: i2s_sam_ssc: data received via I2S bus are partially corrupted |
| * :github:`42199` - drivers: qdec_sam: position measurement unstable if adc_sam_afec driver is enabled |
| * :github:`42187` - Settings tests are not correctly run |
| * :github:`42184` - Incremental build with config changes can produce an invalid binary when userspace is enabled |
| * :github:`42179` - driver: i2s: i2s_mcux_sai build failure on mixmrt1170_evk_cm7 |
| * :github:`42177` - PM_STATE_INFO_DT_ITEMS_LIST macro does not fill the pm_min_residency array |
| * :github:`42176` - mec15xxevb_assy6853: can not be flashed due to "chip not identified" |
| * :github:`42171` - v3.0.0-rc1: mimxrt685_evk_cm33: undefined reference to 'SystemCoreClock' for latency_measure benchmark |
| * :github:`42170` - v3.0.0-rc1: mimxrt685_evk_cm33: dma driver build failure |
| * :github:`42168` - v3.0.0-rc1: mimxrt685_evk_cm33: i2s driver build failure |
| * :github:`42164` - tests/bluetooth/tester broken after switch to logging v2 |
| * :github:`42163` - BIT_MASK(32) generate warning on 32 bits processor |
| * :github:`42161` - samples/compression/l4z: Expected RAM size for correct execution is too low |
| * :github:`42159` - samples: lora: Miss twister harness |
| * :github:`42157` - tests/lib/ringbuffer/libraries.ring_buffer: Miss a timeout |
| * :github:`42151` - eth_sam_gmac: unable to change MAC address |
| * :github:`42149` - DT_SPI_DEV_CS_GPIOS_DT_SPEC_GET is a layering violation that shouldn't exist |
| * :github:`42147` - hts221 driver fails to build |
| * :github:`42125` - Bluetooth: controller: llcp: lll_scan_aux does not compile with new LLCP |
| * :github:`42120` - HTS221 missed header hts221_reg.h |
| * :github:`42118` - mimxrt685_evk_cm33: Build failed on tests/drivers/spi/spi_loopback/drivers.spi.loopback |
| * :github:`42117` - efr32mg_sltb004a: Build issue on 'tests/drivers/spi/spi_loopback/drivers.spi.loopback' |
| * :github:`42112` - OTS: L2CAP: Unable to find channel of LE Credits packet |
| * :github:`42106` - AARCH64 stack initialisation fails with newlib for qemu_cortex_a53 |
| * :github:`42098` - intel_adsp_cavs25: west sign command output some unrecognized ASCII char. |
| * :github:`42092` - stm32l0: Voltage regulator is not restored after leaving STOP mode |
| * :github:`42070` - west: spdx: Missing field for certain build results |
| * :github:`42065` - Bluetooth Controller: scan aux setup not checking extended header length of received packet |
| * :github:`42061` - obj_tracking hangs system on intel_adsp_cavs25 |
| * :github:`42031` - Ringbuffer used in CDC_ACM seems to corrupt data if completely filled during transfer |
| * :github:`42024` - unrecognized argument in option '-mabi=lp64' |
| * :github:`42010` - intel_adsp_cavs18: Test cases failed on SMP related test cases (when CONFIG_MP_NUM_CPUS > 1) |
| * :github:`41996` - LWM2M writing too long strings trigger post_write_cb with previously written value |
| * :github:`41993` - Intel_adsp_cavs18: test cases can not get complete log |
| * :github:`41992` - Intel_adsp_cavs18: tests/kernel/smp_boot_delay: failed to run case |
| * :github:`41991` - Intel_adsp_cavs18: some test cases can not get any log |
| * :github:`41989` - tests: kernel: tickless: ADSP stalls after firmware downloaded on Up Xtreme |
| * :github:`41982` - twister: Test not aborted after board was timed out |
| * :github:`41976` - Extra closing bracket in function lsm6dso_handle_interrupt |
| * :github:`41963` - Kernel usage fault when using semaphore with multi-threading |
| * :github:`41953` - drivers: counter: mcux_ctimer: config used as non-const |
| * :github:`41952` - Log timestamp overflows when using LOGv2 |
| * :github:`41951` - drivers: regulator: pmic: config used as non-const |
| * :github:`41945` - nxp_hal module: Seconds GPIO interrupt does never fire |
| * :github:`41943` - Intel_adsp_cavs15: all the test cases run failed when running them by twister |
| * :github:`41942` - k_delayable_work being used as k_work in work's handler |
| * :github:`41938` - esp_wrover_kit: hello_world build failure |
| * :github:`41933` - updatehub metadata size 0 |
| * :github:`41915` - regression: Build fails after switching logging to V2 |
| * :github:`41911` - pm_power_state_force returns false after first call |
| * :github:`41894` - ISOAL sink handle value checked incorrectly |
| * :github:`41887` - Documentation setup page missing packages for arch linux |
| * :github:`41879` - new ztest api fails when user space is enabled |
| * :github:`41877` - tests: kernel: fatal: ADSP stalls after firmware downloaded on Up Xtreme |
| * :github:`41873` - STM32H735 Power Supply Config incorrect |
| * :github:`41862` - tests: kernel: fail to download firmware to ADSP on Up Xtreme |
| * :github:`41861` - tests: kernel: There are no log output after flashing image to intel_adsp_cavs25 |
| * :github:`41860` - tests: kernel: queue: test case kernel.queue failed on ADSP of Up Xtreme |
| * :github:`41839` - BLE causes system sleep before main |
| * :github:`41835` - UP squared and acrn_ehl_crb: test cases which have config SMP config failed |
| * :github:`41826` - MQTT connection failed |
| * :github:`41821` - ESP32 mcuboot bootloader failed |
| * :github:`41818` - In uart.h uart_irq_rx_ready() function not working properly for STM32F429 controller |
| * :github:`41816` - nrf_802154 radio driver takes random numbers directly from entropy source |
| * :github:`41806` - tests: driver: clock: nrf: Several failures on nrf52dk_nrf52832 |
| * :github:`41794` - Bluetooth: ATT calls GATT callbacks with NULL conn pointer during disconnect |
| * :github:`41792` - CPU load halfed after PR #40784 |
| * :github:`41745` - Power Management blinky example does not work on STM32H735G-DK |
| * :github:`41736` - Xtensa xt-xc++ Failed to build C++ code |
| * :github:`41734` - Can't enable pull-up resistors in ESP32 gpio 25,26,27 |
| * :github:`41722` - mcuboot image not confirmed on nrf5340dk |
| * :github:`41707` - esp32 newlib |
| * :github:`41698` - What does one have to do to activate BT_DBG? |
| * :github:`41694` - undefined reference to '_open' |
| * :github:`41691` - Tickless Kernel on STM32H7 fails with Exception |
| * :github:`41686` - SPI CS signal not used in SSD1306 driver |
| * :github:`41683` - http_client: Unreliable rsp->body_start pointer |
| * :github:`41682` - ESP32 mcuboot |
| * :github:`41653` - Bluetooth: Controller: Extended Advertising Scan: Implement Scan Data length maximum |
| * :github:`41637` - Modbus Gateway: Transaction ID Error! |
| * :github:`41635` - Samples: iso_broadcast can not work properly unless some extra configuration flags |
| * :github:`41627` - PPP_L2 does not properly terminate the modem state machine when going down. |
| * :github:`41624` - ESP32 Uart uart_esp32_irq_tx_ready |
| * :github:`41623` - esp32: fail to build sample/hello_world with west |
| * :github:`41608` - LwM2M: Cannot set pmin/pmax on observable object |
| * :github:`41582` - stm32h7: CSI as PLL source is broken |
| * :github:`41581` - STM32 subghzspi fails pinctrl setup |
| * :github:`41557` - ESP32 Uart 2-bit Stop Register Setting |
| * :github:`41526` - ESP32 UART driver tx_complete fires before last byte sent |
| * :github:`41525` - tests: drivers: : ethernet: fails to link for sam_v71_xult and sam_v71b_xult |
| * :github:`41524` - drivers: dma: dma_mcux_edma: unused variables cause daily build failures |
| * :github:`41523` - drivers: i2c: i2c_mcux: unused variables cause daily build failures |
| * :github:`41509` - OpenThread's timer processing enters infinite loop in 49th day of system uptime |
| * :github:`41503` - including <net/socket.h> fails with redefinition of 'struct zsock_timeval' (sometimes :-) ) |
| * :github:`41499` - drivers: iwdg: stm32: 'WDT_OPT_PAUSE_HALTED_BY_DBG' might not work |
| * :github:`41488` - Stall logging on nrf52840 |
| * :github:`41486` - Zephyr project installation |
| * :github:`41482` - kernel: Dummy thread should not have an uninitialized resource pool |
| * :github:`41471` - qemu_cortex_r5: failed to enable debug |
| * :github:`41465` - Periodic advertising sync failure, when "DONT_SYNC_AOA" or "DONT_SYNC_AOD" options is used |
| * :github:`41442` - power_init for STM32L4 and STM32G0 in POST_KERNEL |
| * :github:`41440` - twister: skip marked as pass |
| * :github:`41426` - ARMCLANG build fail |
| * :github:`41422` - The option CONFIG_SYSTEM_CLOCK_SLOPPY_IDLE blocks k_sleep when CONFIG_PM is enabled |
| * :github:`41418` - tests/lib/devicetree/devices fails to build for thingy52_nrf52832 |
| * :github:`41413` - NRF52832 - PWM not working after zephyr update |
| * :github:`41404` - if zsock_connect() fails, tls_context does not get released automatically |
| * :github:`41399` - samples: userspace: syscall_perf test cannot be run |
| * :github:`41395` - littlefs(external spi flash) + mcuboot can't get right mount area |
| * :github:`41392` - arm ：arm-none-eabi Unable to complete compilation, an error occurred during linking |
| * :github:`41385` - SHT3xD example does not work on ESP32 |
| * :github:`41359` - Bluetooth: connection times out when trying to connect from certain centrals |
| * :github:`41352` - uart_esp32_poll_in returns incorrect value |
| * :github:`41347` - tests: kernel: RT1170 fails test_kernel_cpu_idle |
| * :github:`41339` - stm32, Unable to read UART while checking from Framing error. |
| * :github:`41331` - tests: drivers: disk: fail to handle no SD card situation |
| * :github:`41317` - ADSP: Many kernel test cases which have CONFIG_MP_NUM_CPUS=1 failed in daily testing |
| * :github:`41299` - IS25LP016D SPI NOR FLASH PROBLEM |
| * :github:`41291` - LVGL touch event "LV_EVENT_LONG_PRESSED" can not be generated if I press the screen without lift up my finger |
| * :github:`41289` - shell: infinite error loop upon LOG_ERR in ISR context |
| * :github:`41284` - pthread_cond_wait return value incorrect |
| * :github:`41272` - ci: twister: mcuboot: MCUboot tests are no longer executed in the CI |
| * :github:`41268` - 'bt_gatt_cancel' type mismatch |
| * :github:`41256` - Zero Latency Interrupts conflicts |
| * :github:`41255` - drivers/can/can_mcan.c: address-of-packed-member warnings |
| * :github:`41251` - RT1170 EVK Can does not send data |
| * :github:`41244` - subsys: pm: Low power mode transition broken |
| * :github:`41240` - logging can get messed up when messages are dropped |
| * :github:`41237` - [v2.7] drivers: ieee802154_dw1000: use dedicated workqueue |
| * :github:`41222` - tests: remove not existing platforms from platform allow or integration_platform |
| * :github:`41153` - rt i2s build fail |
| * :github:`41127` - OpenAMP Sample does not work on LPCXpresso55S69 |
| * :github:`41117` - Incorrect setting of gyro sensitivity in LSM6DSO driver |
| * :github:`41111` - uint64 overflow in z_tmcvt() function |
| * :github:`41100` - Non-standard RISC-V assembly is used |
| * :github:`41097` - west init issue |
| * :github:`41095` - libc: newlib: 'gettimeofday' causes stack overflow on non-POSIX builds |
| * :github:`41093` - Kconfig.defconfig:11: error: couldn't parse 'default $(dt_node_int_prop_int,/cpus/cpu@0,clock-frequency)' |
| * :github:`41077` - console: gsm_mux: could not send more than 128 bytes of data on dlci |
| * :github:`41074` - can_mcan_send sends corrupted CAN frames with a byte-by-byte memcpy implementation |
| * :github:`41066` - twister --generate-map is broken |
| * :github:`41062` - kernel: userspace: Potential misaligned access |
| * :github:`41058` - stm32h723 : application gets hung during spi_transceive() operation |
| * :github:`41052` - tests-ci : portability: posix: fs.tls.newlib test Build failure |
| * :github:`41050` - MCUMgr Sample Fails to build |
| * :github:`41043` - Sporadic Bus Fault when using I2C on a nrf52840 |
| * :github:`41026` - LoRa: sx126x: DIO1 interrupt left enabled in sleep mode |
| * :github:`41024` - SPI Loopback test fails to build on iMX RT EVKs |
| * :github:`41017` - USB string descriptors can be re-ordered causing corruption and out-of-bounds-write |
| * :github:`41016` - i2c_sam0.c i2c_sam0_transfer operations do not execute a STOP |
| * :github:`41012` - irq_enable() doesn’t support enabling NVIC IRQ number more than 127 |
| * :github:`40999` - Unable to boot smp_svr sample image as documentation suggests, or sign |
| * :github:`40974` - Xtensa High priority interrupts cannot be masked during initialization |
| * :github:`40965` - Halt on receipt of Google Cloud IoT Core MQTT message sized 648+ bytes |
| * :github:`40946` - Xtensa Interrupt nesting issue |
| * :github:`40942` - Xtensa debug bug |
| * :github:`40936` - STM32 ADC gets stuck in Calibration |
| * :github:`40925` - mesh_badge not working reel_board_v2 |
| * :github:`40917` - twister --export-tests export all cases even this case can not run on given platform |
| * :github:`40916` - Assertion in nordic's BLE controller lll.c:352 |
| * :github:`40903` - documentation generation fails on function typedefs |
| * :github:`40889` - samples: samples/kernel/metairq_dispatch failed on acrn_ehl_crb |
| * :github:`40888` - samples: samples/subsys/portability/cmsis_rtos_v1/philosophers failed on ehl crb |
| * :github:`40887` - tests: debug: test case subsys/debug/coredump failed on acrn_ehl_crb |
| * :github:`40883` - Limitation on logging module |
| * :github:`40881` - Bluetooth: shell: fatal error because ctx_shell is NULL |
| * :github:`40873` - qemu_cortex_r5: fail to handle user_string_alloc_copy() with null parameter |
| * :github:`40870` - tests: syscall: failed to build on fvp_baser_aemv8r_smp |
| * :github:`40866` - Undefined behavior in lib/os/cbprintf_packaged.c: subtraction involving definitely null pointer |
| * :github:`40838` - Nordic UART driver (UARTE) fail to transfer buffers from read only memory |
| * :github:`40827` - Tensorflow example not working in zephyr v2.6 |
| * :github:`40825` - STM32WB55RGV6: No output after west flash |
| * :github:`40820` - coap: blockwise: context current does not match total size after transfer is completed |
| * :github:`40808` - Invalid CMake warning related to rimage |
| * :github:`40795` - Timer signal thread execution loop break SMP on ARM64 |
| * :github:`40783` - samples/subsys/usb/dfu should filter on FLASH driver |
| * :github:`40776` - HCI_USB with nRF52840 dongle disconnect after 30 s |
| * :github:`40775` - stm32: multi-threading broken after #40173 |
| * :github:`40770` - tests/subsys/cpp/libcxx/cpp.libcxx.newlib fails on m2gl025_miv and qemu_cortex_m0 |
| * :github:`40761` - Bluetooth: host: Wait for the response callback before clearing Service Changed data |
| * :github:`40759` - Bluetooth: host: Improper restore of CCC values and handling Service Change indication when bonded peer reconnects |
| * :github:`40758` - Bluetooth: host: CCC values are not immediately stored on GATT Server by default (risk of inconsistency) |
| * :github:`40744` - RT600 LittleFS Sample produces build warning in default configuration |
| * :github:`40740` - tests: logging: test case log_msg2.logging.log_msg2_64b_timestamp failed on qemu_cortex_a9 |
| * :github:`40724` - tests: logging: logging test cases failed in multiple boards |
| * :github:`40717` - twister: failure in parsing code coverage file |
| * :github:`40714` - west flash, Invalid DFU suffix signature |
| * :github:`40688` - in "pinmux_stm32.c" function "stm32_dt_pinctrl_remap" not work |
| * :github:`40672` - EDTT: buffer overflow in edtt_hci_app |
| * :github:`40668` - Issue with twister code coverage tests not working with minimal C library (nRF52840) |
| * :github:`40663` - WWDG not supported on STM32H7 family |
| * :github:`40658` - shtcx not reporting correct humidity value |
| * :github:`40646` - Can't read more than one OUTPUT|INPUT gpio pin in gpio_emul |
| * :github:`40643` - intel_adsp_cavs15: the zephyr_pre0.elf is quite large (530MB) on ADSP for some test cases |
| * :github:`40640` - drivers: usb_dc_native_posix: segfault when using composite USB device |
| * :github:`40638` - drivers: usb_dc_mcux: processing endpoint callbacks in ISR context causes assertion |
| * :github:`40633` - CI documentation build hangs when there is a broken reference |
| * :github:`40624` - twister: coverage: Using --coverage flag for on-target test make tests last until time limit |
| * :github:`40622` - Dark mode readability problem in Unit Test Documentation |
| * :github:`40621` - npcx uart driver uses device PM callback to block suspension |
| * :github:`40614` - poll: the code judgment condition is always true |
| * :github:`40590` - gen_app_partitions scans object files unrelated to current image |
| * :github:`40586` - tests: logging: Logging.add.user scenario fails on all nrf boards |
| * :github:`40578` - MODBUS RS-485 transceiver support broken on several platforms due to DE race condition |
| * :github:`40569` - bisected: kernel.common.stack_protection_arm_fpu_sharing fails on mps3_an547 |
| * :github:`40546` - Bluetooh:host: GATT notify multiple feature not working properly |
| * :github:`40538` - mcuboot build fails with nrf52 internal RC oscillator |
| * :github:`40517` - msgq: NULL handler assertion with data cache enabled |
| * :github:`40483` - ESP32: display sample over i2c not working |
| * :github:`40464` - Dereferencing NULL with getsockname() on TI Simplelink Platform |
| * :github:`40456` - Bluetooth: L2CAP tester application is missing preprocessor flags for ECFC function call |
| * :github:`40453` - LittleFS fails when block count is greater than block size |
| * :github:`40450` - Twister map file shows baud in quotes but should not be in quotes |
| * :github:`40449` - Twister tests fail when running on actual hardware due to deprecated command warning |
| * :github:`40439` - Undefined escape sequence: ill-formed for the C standard |
| * :github:`40438` - Ill-formed sources due to external linkage inline functions calling static functions |
| * :github:`40433` - RTT fails to work in program with large global variable |
| * :github:`40420` - Lower-case characters in Kconfig symbol names cause obscure errors |
| * :github:`40411` - Xtensa xcc compile build fails with SOF application on latest Zephyr main |
| * :github:`40376` - HiFIve1 failed to run tests/kernel/workq/work/ |
| * :github:`40374` - up_squared: isr_dynamic test is failing |
| * :github:`40369` - tests/subsys/logging/log_core/ and tests/subsys/shell/shell/ hang on qemu_cortex_a53 and qemu_riscv64 |
| * :github:`40367` - sample: cycle_64 is failing out due to a timeout on 64-bit versions of qemu_x86 and ehl_crb |
| * :github:`40348` - STM32L496 Uart rx interrupt callback fails to work with LVGL |
| * :github:`40329` - nucleo_g0b1re: FDCAN message RAM write fails on byte-oriented write |
| * :github:`40317` - Crash in ull.c when stressing periodic advertising sync (scanner side) |
| * :github:`40316` - Error undefined reference to '__aeabi_uldivmod' when build with Zephyr 2.7.0 for STM32 |
| * :github:`40298` - Bluetooth assertions in lll_conn.c |
| * :github:`40290` - CAN_STM32: Build error with CONFIG_CAN_AUTO_BUS_OFF_RECOVERY=n |
| * :github:`40256` - websocket: the size of a websocket payload is limited |
| * :github:`40254` - TF-M: BL2 signing is broken due to incompatible MCUboot version |
| * :github:`40244` - [v2.7-branch] hci_spi sample cannot be built for nrf51dk_nrf51422 and 96b_carbon_nrf51 |
| * :github:`40236` - Unsigned int can't be used in condition compare with int |
| * :github:`40215` - RSSI in periodic adv. callbacks always -127 (sync_recv and cte_report_cb) |
| * :github:`40209` - Bluetooth: First AUX_SYNC_IND never received, missing event send to host |
| * :github:`40202` - Bluetooth: Periodic advertising synchronization not re-established after advertiser reset without scan disable |
| * :github:`40198` - Shell module doesn't work on main branch for esp32 board |
| * :github:`40189` - k_poll infrastructure can miss "signals" in a heavily contended SMP system |
| * :github:`40169` - drivers: can: net: compilation broken and no test cases in CI |
| * :github:`40159` - Bluetooth Mesh branch incorrect return value |
| * :github:`40153` - mimxrt1050_evk: failed to run samples/subsys/task_wdt |
| * :github:`40152` - task_wdt can get stuck in a loop where hardware reset is never fired |
| * :github:`40133` - mimxrt1060-evk flash shell command causes shell deadlock |
| * :github:`40129` - 'tests/net/socket/tls/net.socket.tls.preempt' fails with 'qemu_cortex_a9' |
| * :github:`40124` - Build fails with 'CONFIG_SHELL_VT100_COMMANDS=n' |
| * :github:`40119` - OBJECT_TRACING for kernel objects |
| * :github:`40115` - logging: int-uint comparsion causes false assert & epic hang |
| * :github:`40107` - lwm2m: if network drops during firmware update, lock occurs |
| * :github:`40077` - driver: wdt: twrke18f: test_wdt fails |
| * :github:`40076` - Driver led pca9633 does only use first device in devicetree |
| * :github:`40074` - sara-r4: socket call fails due to regression |
| * :github:`40070` - canbus: isotp: Violations of k_fifo and net_buf API usage |
| * :github:`40069` - Bluetooth CCM encryption bug in MIC generation |
| * :github:`40068` - Test suite subsys.pm.device_runtime_api fail on qemu_x86_64 |
| * :github:`40030` - STM32 SD hardware flow control gets disabled if disk_access_init is used |
| * :github:`40021` - mimxrt1060_evk_hyperflash board definition is broken |
| * :github:`40020` - tests: kernel: mem_slab: mslab_api: undefined reference to z_impl_k_sem_give and z_impl_k_sem_take |
| * :github:`40007` - twister: cannot build samples/tests on Windows |
| * :github:`40003` - Bluetooth: host: zephyr writes to disconnected device and triggers a bus fault |
| * :github:`40000` - k_timer timeout handler is called with interrupts locked |
| * :github:`39989` - Zephyr does not persist CCC data written before bonding when bonding has completed which leads to loss of subscriptions on device reset |
| * :github:`39985` - Telnet shell breaks upon sending Ctrl+C character |
| * :github:`39978` - logging.log2_api_deferred and logging.msg2 tests fail on qemu_cortex_a9 |
| * :github:`39973` - Bluetooth: hci_usb example returning "Unknown HCI Command" after reset. |
| * :github:`39969` - USB not automatically enabled when USB_UART_CONSOLE is set |
| * :github:`39968` - samples: tfm_integration: tfm_psa_test broken on OS X (Windows?) |
| * :github:`39947` - open-amp problem with dcache |
| * :github:`39942` - usdhc disk_usdhc_access_write busy fail |
| * :github:`39923` - qspi_sfdp_read fails errata work around |
| * :github:`39919` - CONFIG_ISM330DHCX cannot compile due to missing file |
| * :github:`39904` - bl654_usb does not work with hci_usb sample application |
| * :github:`39900` - usb bug :USB device descriptor could not be obtained on windows10 |
| * :github:`39893` - Bluetooth: hci usb: scan duplicate filter not working |
| * :github:`39883` - BLE stack overlow due to the default option value when compiling with no optimization |
| * :github:`39874` - [Coverity CID: 240214] Dereference before null check in drivers/dma/dma_mcux_edma.c |
| * :github:`39872` - [Coverity CID: 240218] Dereference after null check in subsys/bluetooth/controller/ll_sw/ull_scan_aux.c |
| * :github:`39870` - [Coverity CID: 240220] Argument cannot be negative in tests/net/socket/af_packet_ipproto_raw/src/main.c |
| * :github:`39869` - [Coverity CID: 240221] Unchecked return value from library in drivers/usb/device/usb_dc_native_posix.c |
| * :github:`39868` - [Coverity CID: 240222] Dereference before null check in drivers/dma/dma_mcux_edma.c |
| * :github:`39857` - [Coverity CID: 240234] Uninitialized scalar variable in subsys/bluetooth/shell/iso.c |
| * :github:`39856` - [Coverity CID: 240235] Explicit null dereferenced in subsys/bluetooth/controller/ll_sw/ull_scan_aux.c |
| * :github:`39852` - [Coverity CID: 240241] Out-of-bounds access in subsys/bluetooth/host/adv.c |
| * :github:`39851` - [Coverity CID: 240242] Dereference after null check in tests/bluetooth/tester/src/l2cap.c |
| * :github:`39849` - [Coverity CID: 240244] Untrusted value as argument in drivers/usb/device/usb_dc_native_posix.c |
| * :github:`39844` - [Coverity CID: 240658] Argument cannot be negative in tests/net/lib/dns_sd/src/main.c |
| * :github:`39843` - [Coverity CID: 240659] Out-of-bounds read in /zephyr/include/generated/syscalls/kernel.h (Generated Code) |
| * :github:`39841` - [Coverity CID: 240661] Unchecked return value in tests/net/net_pkt/src/main.c |
| * :github:`39840` - [Coverity CID: 240662] Improper use of negative value in subsys/mgmt/osdp/src/osdp.c |
| * :github:`39839` - [Coverity CID: 240663] Out-of-bounds access in tests/benchmarks/mbedtls/src/benchmark.c |
| * :github:`39835` - [Coverity CID: 240667] Improper use of negative value in samples/subsys/usb/cdc_acm_composite/src/main.c |
| * :github:`39833` - [Coverity CID: 240670] Out-of-bounds access in tests/net/lib/dns_sd/src/main.c |
| * :github:`39832` - [Coverity CID: 240671] Out-of-bounds access in drivers/flash/flash_mcux_flexspi_hyperflash.c |
| * :github:`39830` - [Coverity CID: 240673] Out-of-bounds read in /zephyr/include/generated/syscalls/kernel.h (Generated Code) |
| * :github:`39827` - [Coverity CID: 240676] Out-of-bounds access in drivers/ieee802154/ieee802154_dw1000.c |
| * :github:`39825` - [Coverity CID: 240678] Unchecked return value in drivers/ieee802154/ieee802154_cc1200.c |
| * :github:`39824` - [Coverity CID: 240679] Out-of-bounds access in samples/subsys/usb/cdc_acm_composite/src/main.c |
| * :github:`39823` - [Coverity CID: 240681] Improper use of negative value in drivers/bluetooth/hci/h4.c |
| * :github:`39817` - drivers: pwm: nxp: (potentially) Incorrect return value on API function |
| * :github:`39815` - [Coverity CID: 240688] Out-of-bounds access in tests/net/lib/dns_sd/src/main.c |
| * :github:`39813` - [Coverity CID: 240691] Out-of-bounds access in tests/benchmarks/mbedtls/src/benchmark.c |
| * :github:`39812` - [Coverity CID: 240692] Unintended sign extension in subsys/stats/stats.c |
| * :github:`39810` - [Coverity CID: 240696] Operands don't affect result in subsys/net/lib/lwm2m/lwm2m_util.c |
| * :github:`39809` - [Coverity CID: 240697] Out-of-bounds access in samples/subsys/usb/cdc_acm/src/main.c |
| * :github:`39807` - [Coverity CID: 240699] Out-of-bounds access in tests/bluetooth/tester/src/l2cap.c |
| * :github:`39806` - [Coverity CID: 240700] Unchecked return value in drivers/ieee802154/ieee802154_cc2520.c |
| * :github:`39805` - [Coverity CID: 240703] Improper use of negative value in drivers/bluetooth/hci/h4.c |
| * :github:`39797` - STM32 G4 series compile error when both ADC1 and ADC2 are opened |
| * :github:`39780` - On ESP32S2 platform zsock_getaddrinfo() call causes RTOS to crash |
| * :github:`39774` - modem: uart mux reading optimization never used |
| * :github:`39758` - Build is broken if LWM2M_CANCEL_OBSERVE_BY_PATH config is set |
| * :github:`39756` - kconfig: choice default is not set if hidden under invisible menu |
| * :github:`39726` - How to use PWM LED driver for ESP32? |
| * :github:`39721` - bq274xx sensor - Fails to compile when CONFIG_PM_DEVICE enabled |
| * :github:`39720` - XCC BUILD FAIL :K_MEM_SLAB_DEFINE && K_HEAP_DEFINE |
| * :github:`39718` - STM32L496G_DISCO uart testing fails on single buffer read |
| * :github:`39712` - bq274xx sensor - Fails to compile when CONFIG_PM_DEVICE enabled |
| * :github:`39707` - Can't enable CONFIG_SHELL_LOG_BACKEND Log Shell Menus with pure Telnet Shell Backend |
| * :github:`39705` - Canot use POSIX_API and NET_SOCKETS together |
| * :github:`39704` - Using OpenThread makes the system unresponsive after 49.7 days |
| * :github:`39703` - stm32 uart testing fails on test_read_abort |
| * :github:`39687` - sensor: qdec_nrfx: PM callback has incorrect signature |
| * :github:`39675` - list_boards.py script doesn't properly traverse external board roots |
| * :github:`39672` - net_config_init count calculation appears incorrect. |
| * :github:`39660` - poll() not notified when a TLS/TCP connection is closed without TLS close_notify |
| * :github:`39655` - Linker error with CONFIG_NET_TCP=y |
| * :github:`39645` - STM32L496 Zephyr using LVGL disp_drv.flush_cb can not work |
| * :github:`39629` - Small Compiler warning in subsys/fs/shell.c:381:23 in latest release, need argument change only |
| * :github:`39627` - samples: http_get: cannot run on QEMU |
| * :github:`39624` - Bluetooth: Submitting more GATT writes than available buffers blocks for 30s and then errors out |
| * :github:`39619` - twister: integration_platforms getting unnoticeably skipped when --subset is used |
| * :github:`39609` - spi: slave: division by zero in timeout calculation |
| * :github:`39601` - On ESP32S2 platform GPIO interrupt causes RTOS to hang when configured to GPIO_INT_EDGE_BOTH |
| * :github:`39594` - Possible bug or undocumented behaviour of spi_write |
| * :github:`39588` - drivers: i2c: nrf: i2c error with burst write |
| * :github:`39575` - k_mutex_lock and k_sem_take with K_FOREVER return -EAGAIN value |
| * :github:`39569` - [ESP32] crash when trying to set a low cpu clock frequency |
| * :github:`39549` - Bluetooth: Incomplete Delayed Initialization of acl_mtu Allows Controller to Crash Host Layer |
| * :github:`39546` - mcumgr over serial does not add CRC to length of packet len |
| * :github:`39541` - can: mcux_flexcan: wrong timing calculation |
| * :github:`39538` - logging: rtt: Compilation fails when CONFIG_LOG_BACKEND_RTT_MODE_OVERWRITE=y and CONFIG_MULTITHREADING=n |
| * :github:`39523` - task watchdog crash/asset on NRF52840 - need to reorder task_wdt_feed() in task_wdt_add() |
| * :github:`39516` - function net_eth_vlan_enable does not properly validate vlan tag value |
| * :github:`39506` - Bluetooth: crash in att.c when repeatedly scanning/connecting/disconnecting |
| * :github:`39505` - question: ethernet: carrier_on_off |
| * :github:`39503` - Zephyr boot banner not updated on rebuild with opdated SHA |
| * :github:`39497` - doc: kernel: event object static initialization mismatch |
| * :github:`39487` - esp32 IRQ01 stack utilisation is 100% |
| * :github:`39483` - LSM6DS0 Gyroscope rad/s Calculation Error |
| * :github:`39463` - ESP32 GPIO intterupt |
| * :github:`39461` - Bluetooth: hci acl flow control: bugs of bluetooth hci ACL flow control |
| * :github:`39457` - mec15xxevb_assy6853: metairq_dispatch sample is failing due to timeout while monitoring serial output |
| * :github:`39438` - Scanning for devices sending periodic advertisements stops working after a while, but keeps reporting none periodic. |
| * :github:`39423` - mcuboot not upgrade for stm32l1 series |
| * :github:`39418` - test: run testcase failed on platform mps2_an521_ns |
| * :github:`39416` - west debug throws error |
| * :github:`39405` - CTE report callback have the wrong pointer to bt_le_per_adv_sync |
| * :github:`39400` - stm32f103 example servo_motor don't work |
| * :github:`39399` - linker: Missing align __itcm_load_start / __dtcm_data_load_start linker symbols |
| * :github:`39392` - ARC nsim_sem fail on tests/crypto/tinycrypt_hmac_prng test when use ARCMWDT toolchain |
| * :github:`39340` - Shell FS sample halts with a usage fault error |
| * :github:`39311` - SPDX --init fails on windows systems |
| * :github:`39300` - Library globals in .sdata/.sbss sections doesn't put into memory partition in userspace |
| * :github:`39293` - Can not run normally on MIMXRT1061CVL5A SOC |
| * :github:`39269` - Fail to initialize BLE stack with optimization level zero |
| * :github:`39253` - modem: hl7800: IPv6 socket not created properly |
| * :github:`39242` - net: sockets: Zephyr Fatal in dns_resolve_cb if dns request was attempted in offline state |
| * :github:`39221` - Errors when debuging application in Eclipse using STM32L496G-DISCO |
| * :github:`39216` - Twister: Broken on NRF52840 with pyocd option timeout error |
| * :github:`39179` - twister: --generate-hardware-map ends up in RuntimeError |
| * :github:`39144` - gsm_ppp: stop & starting not working as expected with nullpointer dereference & no full modem init |
| * :github:`39136` - SD disk access runs into TXUNDERRUN and RXOVERRUN of SDMMC driver |
| * :github:`39131` - GATT DB hash calculation is wrong on characteristic declarations using 128-bit UUIDs. |
| * :github:`39096` - DNS responders assume interfaces are up at initialization |
| * :github:`39024` - drivers: sensors: FXOS8700: Interrupt pin routing configuration must be changed in standby power mode |
| * :github:`38988` - MCP2515 driver CS gpio active high support issue |
| * :github:`38987` - Unable to build ESP32 example code using west tool - zephyr |
| * :github:`38954` - Can't get FlexPWM working for imxrt1060 |
| * :github:`38631` - printk to console fails for freescale kinetis 8.2.0 (Zephyr 2.6.0) on FRDM-K64F |
| * :github:`38624` - mcuboot gets the wrong value of DT_FIXED_PARTITION_ID |
| * :github:`38606` - drivers: adc: stm32h7: Oversampling Ratio set incorrectly |
| * :github:`38598` - net_context_put will not properly close TCP connection (might lead to tcp connection leak) |
| * :github:`38576` - net shell: self-connecting to TCP might lead to a crash |
| * :github:`38502` - Update mcumgr library to fix wrong callback state |
| * :github:`38446` - intel_adsp_cavs15: Fail to get testcases output on ADSP |
| * :github:`38376` - Raw Socket Failure when using 2 Raw Sockets and zsock_select() statement - improper mapping from sock to handlers |
| * :github:`38303` - The current BabbleSim tests build system based on bash scripts hides warnings |
| * :github:`38128` - [Coverity CID: 239574] Out-of-bounds access in subsys/storage/flash_map/flash_map.c |
| * :github:`38047` - twister: The --board-root parameter doesn't appear to work |
| * :github:`37893` - mcumgr_serial_tx_pkt with len==91 fails to transmit CRC |
| * :github:`37389` - nucleo_g0b1re: Swapping image in mcuboot results in hard fault and softbricks the device |
| * :github:`36986` - LittleFS mount fails (error -22) |
| * :github:`36962` - littlefs: Too small heap for file cache (again). |
| * :github:`36852` - acrn_ehl_crb: the test of tests/subsys/cpp/libcxx/ failed |
| * :github:`36808` - xtensa xcc build Fail , CONFIG_NO_OPTIMIZATIONS=y |
| * :github:`36766` - tests-ci :kernel.tickless.concept.tickless_slice : test failed |
| * :github:`34732` - stm32h747i_disco: Wrong Power supply setting LDO |
| * :github:`34375` - drivers: can: CAN configure fails when CONFIG_CAN_FD_MODE is enabled |
| * :github:`31748` - boards:lpcxpresso55s69: Manual toggling of CS required with ETH Click shield |
| * :github:`23052` - nrf52840_pca10056: Spurious RTS pulse and incorrect line level with hardware flow control disabled |
| * :github:`16587` - build failures with gcc 9.x |
| * :github:`8924` - Get rid of -fno-strict-overflow |
