| /* |
| * Copyright (c) 2024 Nordic Semiconductor ASA |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| &pinctrl { |
| /omit-if-no-ref/ uart120_default: uart120_default { |
| group1 { |
| psels = <NRF_PSEL(UART_TX, 7, 7)>; |
| }; |
| |
| group2 { |
| bias-pull-up; |
| psels = <NRF_PSEL(UART_RX, 7, 4)>; |
| }; |
| }; |
| |
| /omit-if-no-ref/ uart120_sleep: uart120_sleep { |
| group1 { |
| low-power-enable; |
| psels = <NRF_PSEL(UART_TX, 7, 7)>, |
| <NRF_PSEL(UART_RX, 7, 4)>; |
| }; |
| }; |
| |
| /omit-if-no-ref/ uart135_default: uart135_default { |
| group1 { |
| psels = <NRF_PSEL(UART_TX, 1, 11)>, |
| <NRF_PSEL(UART_RTS, 1, 9)>; |
| }; |
| |
| group3 { |
| bias-pull-up; |
| psels = <NRF_PSEL(UART_RX, 1, 10)>, |
| <NRF_PSEL(UART_CTS, 1, 7)>; |
| }; |
| }; |
| |
| /omit-if-no-ref/ uart135_sleep: uart135_sleep { |
| group1 { |
| low-power-enable; |
| psels = <NRF_PSEL(UART_TX, 1, 11)>, |
| <NRF_PSEL(UART_RX, 1, 10)>, |
| <NRF_PSEL(UART_RTS, 1, 9)>, |
| <NRF_PSEL(UART_CTS, 1, 7)>; |
| }; |
| }; |
| |
| /omit-if-no-ref/ uart136_default: uart136_default { |
| group1 { |
| psels = <NRF_PSEL(UART_TX, 2, 6)>, |
| <NRF_PSEL(UART_RTS, 2, 7)>; |
| }; |
| |
| group3 { |
| bias-pull-up; |
| psels = <NRF_PSEL(UART_RX, 2, 4)>, |
| <NRF_PSEL(UART_CTS, 2, 5)>; |
| }; |
| }; |
| |
| /omit-if-no-ref/ uart136_sleep: uart136_sleep { |
| group1 { |
| low-power-enable; |
| psels = <NRF_PSEL(UART_TX, 2, 6)>, |
| <NRF_PSEL(UART_RX, 2, 4)>, |
| <NRF_PSEL(UART_RTS, 2, 7)>, |
| <NRF_PSEL(UART_CTS, 2, 5)>; |
| }; |
| }; |
| |
| /omit-if-no-ref/ exmif_default: exmif_default { |
| group1 { |
| psels = <NRF_PSEL(EXMIF_CK, 6, 0)>, |
| <NRF_PSEL(EXMIF_DQ0, 6, 7)>, |
| <NRF_PSEL(EXMIF_DQ1, 6, 5)>; |
| nordic,drive-mode = <NRF_DRIVE_H0H1>; |
| }; |
| }; |
| |
| /omit-if-no-ref/ can120_default: can120_default { |
| group1 { |
| psels = <NRF_PSEL(CAN_RX, 9, 4)>, |
| <NRF_PSEL(CAN_TX, 9, 5)>; |
| }; |
| }; |
| |
| /omit-if-no-ref/ pwm130_default: pwm130_default { |
| group1 { |
| psels = <NRF_PSEL(PWM_OUT0, 9, 2)>; |
| }; |
| }; |
| |
| /omit-if-no-ref/ pwm130_sleep: pwm130_sleep { |
| group1 { |
| psels = <NRF_PSEL(PWM_OUT0, 9, 2)>; |
| low-power-enable; |
| }; |
| }; |
| }; |