| :orphan: |
| |
| .. _zephyr_2.2: |
| .. _zephyr_2.2.1: |
| |
| Zephyr 2.2.1 |
| ############# |
| |
| This is a maintenance release for Zephyr 2.2 with fixes. |
| |
| See :ref:`zephyr_2.2.0` for the previous version release notes. |
| |
| Security Vulnerability Related |
| ****************************** |
| |
| The following security vulnerabilities (CVE) were addressed in this release: |
| |
| * Fix CVE-2020-10028 |
| * Fix CVE-2020-10060 |
| * Fix CVE-2020-10063 |
| * Fix CVE-2020-10066 |
| |
| More detailed information can be found in: |
| https://docs.zephyrproject.org/latest/security/vulnerabilities.html |
| |
| Issues Fixed |
| ************ |
| |
| These GitHub issues were addressed since the previous 2.2.0 tagged |
| release: |
| |
| * :github:`23494` - Bluetooth: LL/PAC/SLA/BV-01-C fails if Slave-initiated Feature Exchange is disabled |
| * :github:`23485` - BT: host: Service Change indication sent regardless of whether it is needed or not. |
| * :github:`23482` - 2M PHY + DLE and timing calculations on an encrypted link are wrong |
| * :github:`23070` - Bluetooth: controller: Fix ticker implementation to avoid catch up |
| * :github:`22967` - Bluetooth: controller: ASSERTION FAIL on invalid packet sequence |
| * :github:`24183` - [v2.2] Bluetooth: controller: split: Regression slave latency during connection update |
| * :github:`23805` - Bluetooth: controller: Switching to non conn adv fails for Mesh LPN |
| * :github:`24086` - Bluetooth: SMP: Existing bond deleted on pairing failure |
| * :github:`24211` - [v2.2.x] lib: updatehub: Not working on Zephyr 2.x |
| * :github:`24601` - Bluetooth: Mesh: Config Client's net_key_status pulls two key indexes, should pull one. |
| * :github:`25067` - Insufficient ticker nodes for vendor implementations |
| * :github:`25350` - Bluetooth: controller: Data transmission delayed by slave latency |
| * :github:`25483` - Bluetooth: controller: split: feature exchange not conform V5.0 core spec |
| * :github:`25478` - settings_runtime_set() not populating bt/cf |
| * :github:`25447` - cf_set() returns 0 when no cfg is available |
| |
| .. _zephyr_2.2.0: |
| |
| Zephyr 2.2.0 |
| ############ |
| |
| We are pleased to announce the release of Zephyr RTOS version 2.2.0. |
| |
| Major enhancements with this release include: |
| |
| * We added initial support for 64-bit ARMv8-A architecture (Experimental). |
| * CANopen protocol support through 3rd party CANopenNode stack |
| * LoRa support was added through integration of the Semtech LoRaWAN endpoint |
| stack and addition of a new SX1276 LoRa modem driver. |
| |
| The following sections provide detailed lists of changes by component. |
| |
| Security Vulnerability Related |
| ****************************** |
| |
| The following security vulnerabilities (CVEs) were addressed in this release: |
| |
| * Fix CVE-2020-10019 |
| * Fix CVE-2020-10021 |
| * Fix CVE-2020-10023 |
| * Fix CVE-2020-10024 |
| * Fix CVE-2020-10026 |
| * Fix CVE-2020-10027 |
| * Fix CVE-2020-10028 |
| * Fix CVE-2020-10058 |
| |
| More detailed information can be found in: |
| https://docs.zephyrproject.org/latest/security/vulnerabilities.html |
| |
| API Changes |
| *********** |
| |
| Deprecated in this release |
| ========================== |
| |
| * Settings |
| |
| * SETTINGS_USE_BASE64, encoding values in base64 is marked for removal. |
| |
| Stable API changes in this release |
| ================================== |
| |
| * GPIO |
| |
| * GPIO API has been reworked to support flags known from Linux DTS GPIO |
| bindings. They will typically be defined in the board DTS file |
| |
| - GPIO_ACTIVE_LOW, GPIO_ACTIVE_HIGH used to set pin active level |
| - GPIO_OPEN_DRAIN, GPIO_OPEN_SOURCE used to configure pin as open drain or |
| open source |
| - GPIO_PULL_UP, GPIO_PULL_DOWN used to configure pin bias |
| |
| * Reading / writing of pin logical level is supported by gpio_pin_get, |
| gpio_pin_set functions. |
| * Reading / writing of pin physical level is supported by gpio_pin_get_raw, |
| gpio_pin_set_raw functions. |
| * New set of port functions that operate simultaneously on multiple pins |
| that belong to the same controller. |
| * Interrupts should be configured by a dedicated |
| gpio_pin_interrupt_configure() function. Configuring interrupts via |
| gpio_pin_configure() is still supported but this feature will be removed |
| in future releases. |
| * New set of flags allows to set arbitrary interrupt configuration (if |
| supported by the driver) based on pin physical or logical levels. |
| * New set of flags to configure pin as input, output or in/out as well as set |
| output initial state. |
| * Majority of the old GPIO API has been deprecated. While the care was taken |
| to preserve backward compatibility due to the scope of the work it was not |
| possible to fully achieve this goal. We recommend to switch to the new GPIO |
| API as soon as possible. |
| * Areas where the deprecated API may behave differently to the original old |
| implementation are: |
| |
| - Configuration of pin interrupts, especially involving GPIO_INT_ACTIVE_LOW |
| and GPIO_POL_INV flags. |
| - Behavior of gpio_pin_configure() when invoked without interrupt related |
| flags. In the new implementation of this deprecated functionality the |
| interrupts remain unmodified. In the original implementation some of the |
| GPIO drivers would disable the interrupts. |
| |
| * Several drivers that rely on the functionality provided by the GPIO API |
| were reworked to honor pin active level. Any external users of these |
| drivers will have to update their DTS board files. |
| |
| - bluetooth/hci/spi.c |
| - display/display_ili9340.c |
| - display/ssd1306.c |
| - ieee802154/ieee802154_mcr20a.c |
| - ieee802154/ieee802154_rf2xx.c |
| - lora/sx1276.c |
| - wifi/eswifi/eswifi_core.c |
| - majority of the sensor drivers |
| |
| * PWM |
| |
| * The pwm_pin_set_cycles(), pwm_pin_set_usec(), and |
| pwm_pin_set_nsec() functions now take a flags parameter. The newly |
| introduced flags are PWM_POLARITY_NORMAL and PWM_POLARITY_INVERTED |
| for specifying the polarity of the PWM signal. The flags parameter |
| can be set to 0 if no flags are required (the default is |
| PWM_POLARITY_NORMAL). |
| * Similarly, the pwm_pin_set_t PWM driver API function function now |
| takes a flags parameter. The PWM controller driver must check the |
| value of the flags parameter and return -ENOTSUP if any |
| unsupported flag is set. |
| |
| * USB |
| |
| * The usb_enable() function, which was previously invoked automatically |
| by the USB stack, now needs to be explicitly called by the application |
| in order to enable the USB subsystem. |
| * The usb_enable() function now takes a parameter, usb_dc_status_callback |
| which can be set by the application to a callback to receive status events |
| from the USB stack. The parameter can also be set to NULL if no callback is required. |
| |
| * nRF flash driver |
| |
| * The nRF Flash driver has changed its default write block size to 32-bit |
| aligned. Previous emulation of 8-bit write block size can be selected using |
| the CONFIG_SOC_FLASH_NRF_EMULATE_ONE_BYTE_WRITE_ACCESS Kconfig option. |
| Usage of 8-bit write block size emulation is only recommended for |
| compatibility with older storage contents. |
| |
| * Clock control |
| |
| * The callback prototype (clock_control_cb_t) has now additional argument |
| (clock_control_subsys_t) indicating which clock subsystem got started. |
| |
| Removed APIs in this release |
| ============================ |
| |
| * Shell |
| |
| * SHELL_CREATE_STATIC_SUBCMD_SET (deprecated), replaced by |
| SHELL_STATIC_SUBCMD_SET_CREATE |
| * SHELL_CREATE_DYNAMIC_CMD (deprecated), replaced by SHELL_DYNAMIC_CMD_CREATE |
| |
| * Newtron Flash File System (NFFS) was removed. NFFS was removed since it has |
| serious issues, not fixed since a long time. Where it was possible |
| NFFS usage was replaced by LittleFS usage as the better substitute. |
| |
| Kernel |
| ****** |
| |
| * Addressed some race conditions observed on SMP-enabled systems |
| * Propagate a distinct error code if a workqueue item is submitted that |
| has already been completed |
| * Disable preemption when handing fatal errors |
| * Fix an issue with the system call stack frame if the system call is |
| preempted and then later tries to Z_OOPS() |
| * add k_thread_stack_space_get() system call for analyzing thread stack |
| space. Older methods which had problems in some cases or on some |
| architectures like STACK_ANALYZE() are now deprecated. |
| * Many kernel object APIs now optionally return runtime error values |
| instead of relying on assertions. Whether these return values, fail |
| assertions, or do no checking at all is controlled by the new |
| Kconfig options ASSERT_ON_ERRORS, NO_RUNTIME_CHECKS, RUNTIME_ERROR_CHECKS. |
| * Cleanups to the arch_cpu_start() API |
| * Spinlock validation now dumps the address of the incorrectly used spinlock |
| * Various improvements to the assertion mechanism |
| * k_poll() may be passed 0 events, in which case it just puts the caller to |
| sleep |
| * Add k_thread_foreach_unlocked() API |
| * Add an assertion if k_sleep() is called from an ISR |
| * Numerous 64-bit fixes, mostly related to data type sizes |
| * k_mutex_unlock() is now correctly a rescheduling point |
| * Calling k_thread_suspend() on the current thread now correctly invokes |
| the scheduler |
| * Calling k_thread_suspend() on any thread cancels any pending timeouts for |
| that thread |
| * Fix edge case in meta-IRQ preemption of co-operative threads |
| |
| Architectures |
| ************* |
| |
| * ARC: |
| |
| * Fixed several irq-handling related issues |
| |
| * ARM: |
| |
| * Added initial support for ARMv8-A 64-bit architecture (Experimental) |
| * Added support for Direct Dynamic Interrupts in ARM Cortex-M |
| * Fixed several critical bugs in ARM Cortex-R architecture port |
| * Fixed several critical bugs in Stack Limit checking for ARMv8-M |
| * Added QEMU emulation support for ARM Cortex-A53 |
| * Enhanced QEMU emulation support for ARM Cortex-R architecture |
| * Enhanced test coverage for ARM-specific kernel features |
| * Added support for GIC SGI and PPI interrupt types |
| * Refactored GIC driver to support multiple GIC versions |
| |
| * POSIX: |
| |
| * N/A |
| |
| * RISC-V: |
| |
| * N/A |
| |
| * x86: |
| |
| * Fix an issue with Kconfig values larger than INT_MAX |
| * Fix an issue where callee-saved registers could be unnecessarily |
| saved on the stack when handling exceptions on x86_64 |
| * Fix a potential race with saving RFLAGS on context switch on x86_64 |
| * Enable 64-bit mode and X2APIC for the 'acrn' target |
| * Add a poison value of 0xB9 to RIP if a thread is dispatched on multiple |
| cores |
| * Implement CONFIG_USERSPACE on x86_64 |
| * Fix an issue where reserved memory could be overwritten when loading the |
| Zephyr image on qemu_x86_64 |
| * x86_64 will now exit QEMU when encountering a fatal error, much like |
| 32-bit already does |
| * Cleanups and improvements to exception debug messages |
| |
| Boards & SoC Support |
| ******************** |
| |
| * Added support for these SoC series: |
| |
| .. rst-class:: rst-columns |
| |
| * Atmel SAM4E |
| * Atmel SAMV71 |
| * Broadcom BCM58400 |
| * NXP i.MX RT1011 |
| * Silicon Labs EFM32GG11B |
| * Silicon Labs EFM32JG12B |
| * ST STM32F098xx |
| * ST STM32F100XX |
| * ST STM32F767ZI |
| * ST STM32L152RET6 |
| * ST STM32L452XC |
| * ST STM32G031 |
| * Intel Apollolake Audio DSP |
| |
| * Added support for these Xtensa boards: |
| |
| .. rst-class:: rst-columns |
| |
| * Up Squared board Audio DSP |
| |
| * Added support for these ARM boards: |
| |
| .. rst-class:: rst-columns |
| |
| * Atmel SAM 4E Xplained Pro |
| * Atmel SAM E54 Xplained Pro |
| * Atmel SAM V71 Xplained Ultra |
| * Broadcom BCM958401M2 |
| * Cortex-A53 Emulation (QEMU) |
| * Google Kukui EC |
| * NXP i.MX RT1010 Evaluation Kit |
| * Silicon Labs EFM32 Giant Gecko GG11 |
| * Silicon Labs EFM32 Jade Gecko |
| * ST Nucleo F767ZI |
| * ST Nucleo G474RE |
| * ST Nucleo L152RE |
| * ST Nucleo L452RE |
| * ST STM32G0316-DISCO Discovery kit |
| * ST STM32VLDISCOVERY |
| |
| * Removed support for these ARM boards: |
| |
| .. rst-class:: rst-columns |
| |
| * TI CC2650 |
| |
| |
| * Added support for these following shields: |
| |
| .. rst-class:: rst-columns |
| |
| * ST7789V Display generic shield |
| * TI LMP90100 Sensor Analog Frontend (AFE) Evaluation Board (EVB) |
| |
| * Removed support for these following shields: |
| |
| .. rst-class:: rst-columns |
| |
| * Link board CAN |
| |
| Drivers and Sensors |
| ******************* |
| |
| * ADC |
| |
| * Added LMP90xxx driver with GPIO |
| |
| * Audio |
| |
| * N/A |
| |
| * Bluetooth |
| |
| * Update SPI driver to new GPIO API |
| * Minor fixes to H:5 (Three-wire UART) driver |
| |
| * CAN |
| |
| * Support for CAN_2 on STM32, but no simultaneous use of CAN_1 and CAN_2. |
| * Support for STM32F3 and STM32F4 series |
| * Added SocketCAN support to mcux flexcan driver |
| * Fixed bit timing conversion in stm32 driver |
| * Introduced can-primary device tree alias |
| |
| * Clock Control |
| |
| * Modified driver for nRF platform to use single device with multiple |
| subsystems, one for each clock source. |
| |
| * Console |
| |
| * N/A |
| |
| * Counter |
| |
| * The counter_read() API function is deprecated in favor of |
| counter_get_value(). The new API function adds a return value for |
| indicating whether the counter was read successfully. |
| * Added missing syscalls |
| |
| * Crypto |
| |
| * Added AES GCM, ECB, and CBC support to crypto_mtls_shim |
| * Added stm32 CRYP driver |
| |
| * Debug |
| |
| * N/A |
| |
| * Display |
| |
| * Added generic display driver sample |
| * Added support for BGR565 pixel format |
| * Added support for LVGL v6.1 |
| * Introduced KSCAN based ft5336 touch panel driver |
| * Added support for LVGL touch input device |
| |
| * DMA |
| |
| * dw: renaming cavs drivers into DesignWare |
| * stm32: improvements over channels support |
| |
| * EEPROM |
| |
| * Added EEPROM driver for STM32L0 and STM32L1 SoC series |
| * Added EEPROM simulator (replacing native_posix EEPROM driver) |
| |
| * Entropy |
| |
| * Added support for sam0 |
| * Added LiteX PRBS module driver |
| |
| * ESPI |
| |
| * N/A |
| |
| * Ethernet |
| |
| * Support for SiLabs Giant Gecko GG11 Ethernet driver |
| * Fixed Ethernet networking for LiteX VexRiscv |
| |
| * Flash |
| |
| * Added Nordic JEDEC QSPI NOR flash driver |
| * Unified native_posix flash driver with drivers/flash/flash_simulator |
| * fixed: erase native_posix flash in initialization |
| * extend MCUX flash drive to support LPC55xxx devices |
| * stm32: Replace register accesses for Flash driver to use STM32Cube |
| * Nios2: qspi unaligned read support |
| * sam0: Add support for SAME54 |
| * Added the flash driver of the stm32f1x family |
| |
| * GPIO |
| |
| * Updated all drivers to the new API |
| * Added LiteX GPIO driver |
| |
| * Hardware Info |
| |
| * N/A |
| |
| * I2C |
| |
| * Enabled interrupts by default in stm32 driver |
| * Added I2C shell with scan command |
| * Added LiteX I2C controller driver |
| * Added STM32G0X support to stm32 driver |
| * Added support for bus idle timeout property to mcux lpspi driver |
| * Added support for SAME54 to sam0 driver |
| |
| * I2S |
| |
| * N/A |
| |
| * IEEE 802.15.4 |
| |
| * Add support for IEEE 802.15.4 rf2xxx driver |
| |
| * Interrupt Controller |
| |
| * Added support for multiple GIC versions |
| * Renamed s1000 driver to cavs |
| * Added SweRV Programmable Interrupt Controller driver |
| * Fixed invalid channel bug for RV32M1 interrupt controller |
| |
| * IPM |
| |
| * N/A |
| |
| * Keyboard Scan |
| |
| * Added ft5336 touch panel driver |
| |
| * LED |
| |
| * N/A |
| |
| * LED Strip |
| |
| * Fixed up ws2812 driver |
| |
| * LoRa |
| |
| * Added APIs and drivers needed to support LoRa technology by reusing the |
| LoRaMac-node library. |
| |
| * Modem |
| |
| * Add support for generic GSM modem |
| |
| * Neural Net |
| |
| * N/A |
| |
| * PCIe |
| |
| * N/A |
| |
| * Pinmux |
| |
| * Removed CC2650 driver |
| |
| * PS/2 |
| |
| * N/A |
| |
| * PTP Clock |
| |
| * N/A |
| |
| * PWM |
| |
| * Added RV32M1 timer/PWM driver |
| * Added LiteX PWM peripheral driver |
| * Added support for intverted PWM signals |
| |
| * Sensor |
| |
| * Fixed DRDY interrupt in lis3mdl driver |
| * Added nxp kinetis temperature sensor driver |
| * Reworked ccs811 driver |
| * Fixed tmp007 driver to use i2c_burst_read |
| * Introduced sensor shell module |
| * Added ms5607 driver |
| |
| * Serial |
| |
| * nRF UARTE driver support TX only mode with receiver permanently disabled. |
| * Enabled shared interrupts support in uart_pl011 driver |
| * Implemented configure API in ns16550 driver |
| * Removed cc2650 driver |
| * Added async API system calls |
| |
| * SPI |
| |
| * Added support for samv71 to sam driver |
| * Added support for same54 support to sam0 driver |
| * Added PM busy state support in DW driver |
| * Added Gecko SPI driver |
| * Added mcux flexcomm driver |
| |
| * Timer |
| |
| * Optimized reads of MTIME/MTIMECMP on 64-bit RISC-V |
| * Added per-core ARM architected timer driver |
| * Added support for same54 to sam0 rtc timer driver |
| |
| * USB |
| |
| * Add support for SAMV71 SoC |
| * Add support for SAME54 SoC |
| * Extend USB device support to all NXP IMX RT boards |
| |
| * Video |
| |
| * N/A |
| |
| * Watchdog |
| |
| * Added SiLabs Gecko watchdog driver |
| * Added system calls |
| * Fixed callback call on stm32 wwdg enable |
| |
| * WiFi |
| |
| * Reworked offloading mechanism in eswifi and simplelink drivers |
| |
| Networking |
| ********** |
| |
| * Add support to configure OpenThread Sleepy End Device (SED) |
| * Add 64-bit support to net_buf APIs |
| * Add support for IEEE 802.15.4 rf2xxx driver |
| * Add TLS secure renegotiation support |
| * Add support for Timestamp and Record Route IPv4 options. |
| They are only used for ICMPv4 Echo-Request packets. |
| * Add sample cloud application that shows how to connect to Azure cloud |
| * Add optional timestamp resource to some of the LWM2M IPSO objects |
| * Add support to poll() which can now return immediately when POLLOUT is set |
| * Add support to PPP for enabling connection setup to Windows |
| * Add signed certificate support to echo-server sample application |
| * Add support for handling multiple simultaneous mDNS requests |
| * Add support for SiLabs Giant Gecko GG11 Ethernet driver |
| * Add support for generic GSM modem which uses PPP to connect to data network |
| * Add UTC offset and timezone support to LWM2M |
| * Add RX time statistics support to packet socket |
| * Update ACK handling in IEEE 802.154 nrf5 driver and OpenThread |
| * Update MQTT PINGREQ count handling |
| * Update wpan_serial sample to support more boards |
| * Update Ethernet e1000 driver debugging prints |
| * Update OpenThread to use settings subsystem |
| * Update IPv6 to use interface prefix in routing |
| * Update socket offloading support to support multiple registered interfaces |
| * Fix checks when waiting network interface to come up in configuration |
| * Fix zperf sample issue when running out of network buffers |
| * Fix PPP IPv4 Control Protocol (IPCP) handling |
| * Fix native_posix Ethernet driver to read data faster |
| * Fix PPP option handling |
| * Fix MQTT to close connection faster |
| * Fix 6lo memory corruption during uncompression |
| * Fix echo-server sample application accept handling |
| * Fix Websocket to receive data in small chunks |
| * Fix Virtual LAN (VLAN) support to add link local address to network interface |
| * Various fixes to new TCP stack implementation |
| * Remove NATS sample application |
| |
| CAN Bus |
| ******* |
| |
| * CANopen protocol support through 3rd party CANopenNode stack. |
| * Added native ISO-TP subsystem. |
| * Introduced CAN-PRIMARY alias. |
| * SocketCAN for MCUX flexcan. |
| |
| Bluetooth |
| ********* |
| |
| * Host: |
| |
| * GAP: Add dynamic LE scan listener API |
| * GAP: Pre-allocate connection objects for connectable advertising and |
| whitelist initiator. |
| * GAP: Fixes for multi-identity support |
| * GAP: RPA timeout handling fixes |
| * GAP: Add remote version information |
| * GATT: Add return value to cfg_write callback |
| * L2CAP: move channel processing to the system workqueue |
| * L2CAP: multiple fixes for credit-based flowcontrol |
| * SMP: Add pairing_accept callback |
| * SMP: Fix Security Manager timeout handling |
| |
| * Mesh: |
| |
| * Add support for Mesh Configuration Database |
| * Multiple fixes to Friendship feature |
| * Add support for sending segmented control messages |
| * Add support for sending reliable model publication messages |
| |
| * BLE split software Controller: |
| |
| * Multiple fixes, including all those required to pass qualification |
| * Implemented software-deferred privacy for platforms without built-in |
| address resolution support |
| * Added dynamic TX power control, including a set of vendor-specific commands |
| to read and write the TX power |
| * Added a Kconfig option, BT_CTLR_PARAM_CHECK, to enable additional parameter |
| checking |
| * Added basic support for SMI (Stable Modulation Index) |
| * Ticker: Implemented dynamic rescheduling |
| * Nordic: switched to using a single clock device for clock control |
| * openisa: Added encryption and decryption support |
| |
| * BLE legacy software Controller: |
| |
| * Multiple fixes |
| * Added dynamic TX power control support |
| |
| USB Device Stack |
| **************** |
| |
| * Stack: |
| |
| * API: Add support for user device status callback |
| * Rework switching to alternate interface |
| * Make USB Descriptor power options configurable |
| * Derive USB device Serial Number String from HWINFO (required by USB MSC) |
| * Move USB transfer functions to appropriate file as preparation for |
| the rework |
| * Windows OS compatibility: Set USB version to 2.1 when using BOS descriptor |
| * Convert VBUS control to new GPIO API |
| |
| * Classes: |
| |
| * CDC ACM: Memory and performance improvements, avoid ZLP during IN transactions |
| * DFU: Limit upload length during DFU_UPLOAD to the request buffer size |
| * Loopback: Re-trigger usb_write after interface configuration event |
| |
| Build and Infrastructure |
| ************************ |
| |
| * The minimum Python version supported by Zephyr's build system and tools is |
| now 3.6. |
| * Renamed :file:`generated_dts_board.h` and :file:`generated_dts_board.conf` to |
| :file:`devicetree.h` and :file:`devicetree.conf`, along with various related |
| identifiers. Including :file:`generated_dts_board.h` now generates a warning |
| saying to include :file:`devicetree.h` instead. |
| |
| Libraries / Subsystems |
| *********************** |
| |
| * LoRa |
| |
| * LoRa support was added through official LoRaMac-node reference |
| implementation. |
| |
| * Logging |
| |
| * Improvements in immediate mode: less interrupts locking, better RTT usage, |
| logging from thread context. |
| * Improved notification about missing log_strdup. |
| |
| * mbedTLS updated to 2.16.4 |
| |
| HALs |
| **** |
| |
| * HALs are now moved out of the main tree as external modules and reside in |
| their own standalone repositories. |
| |
| Documentation |
| ************* |
| |
| * settings: include missing API subgoups into the documentation |
| * Documentation for new boards and samples. |
| * Improvements and clarity of API documentation. |
| |
| Tests and Samples |
| ***************** |
| |
| * Added sample for show settings subsystem API usage |
| |
| Issue Related Items |
| ******************* |
| |
| These GitHub issues were addressed since the previous 2.1.0 tagged |
| release: |
| |
| .. comment List derived from GitHub Issue query: ... |
| * :github:`issuenumber` - issue title |
| |
| * :github:`23351` - boards: nucle_g474re: west flash doesn't work |
| * :github:`23321` - Bluetooth: LE SC OOB authentication in central connects using different RPA |
| * :github:`23310` - GUI: LVGL: possible NULL dereference |
| * :github:`23281` - UART console input does not work on SAM E5x |
| * :github:`23268` - Unnecessary privileged stacks with CONFIG_USERSPACE=y |
| * :github:`23244` - kernel.scheduler fails on frdmkw41z |
| * :github:`23231` - RISCV Machine Timer consistently interrupts long running system after soft reset |
| * :github:`23221` - status register value always reads 0x0000 in eth_mcux_phy_setup |
| * :github:`23209` - Bug in tls_set_credential |
| * :github:`23208` - Can not flash test images into up_squared board. |
| * :github:`23202` - Macro value for 10 bit ADC is wrong in MEC driver. |
| * :github:`23198` - rf2xx driver uses mutex in ISR |
| * :github:`23173` - west flash --nobuild, west flash-signed |
| * :github:`23172` - Common west flash, debug arguments like --hex-file can't be used from command line |
| * :github:`23169` - "blinky" sample fails to build for BBC MicroBit (DT_ALIAS_LED0_GPIOS_CONTROLLER undefined) |
| * :github:`23168` - Toolchain docs: describe macOS un-quarantine procedure |
| * :github:`23165` - macOS setup fails to build for lack of "elftools" Python package |
| * :github:`23148` - bme280 sample does not compile |
| * :github:`23147` - tests/drivers/watchdog/wdt_basic_api failed on mec15xxevb_assy6853 board. |
| * :github:`23121` - Bluetooth: Mesh: Proxy servers only resends segments to proxy |
| * :github:`23110` - PTS: Bluetooth: GATT/SR/GAS/BV-07-C |
| * :github:`23109` - LL.TS Test LL/CON/SLA/BV-129-C fails (split) |
| * :github:`23072` - #ifdef __cplusplus missing in tracking_cpu_stats.h |
| * :github:`23069` - Bluetooth: controller: Assert in data length update procedure |
| * :github:`23050` - subsys/bluetooth/host/conn.c: conn->ref is not 0 after disconnected |
| * :github:`23047` - cdc_acm_composite sample doesn't catch DTR from second UART |
| * :github:`23035` - dhcpv4_client sample not working on sam e70 |
| * :github:`23023` - Bluetooth: GATT CCC problem (GATT Server) |
| * :github:`23015` - Ongoing LL control procedures fails with must-expire latency (BT_CTLR_CONN_META) |
| * :github:`23004` - Can't use west to flash test images into up_squared board. |
| * :github:`23002` - unknown type name 'class' |
| * :github:`22999` - pend() assertion can allow user threads to crash the kernel |
| * :github:`22985` - Check if Zephyr is affected by SweynTooth vulnerabilities |
| * :github:`22982` - PTS: Test framework: Bluetooth: GATT/SR/GAS/BV-01-C, GATT/SR/GAS/BV-07-C - BTP Error |
| * :github:`22979` - drivers: hwinfo: Build fails on some SoC |
| * :github:`22977` - ARM Cortex-M4 stack offset when not using Floating point register sharing |
| * :github:`22968` - Bluetooth: controller: LEGACY: ASSERTION failure on invalid packet sequence |
| * :github:`22967` - Bluetooth: controller: ASSERTION FAIL on invalid packet sequence |
| * :github:`22945` - Bluetooth: controller: ASSERTION FAIL Radio is on during flash operation |
| * :github:`22933` - k_delayed_work_submit_to_queue returns error code when resubmitting previously completed work. |
| * :github:`22931` - GPIO callback is not triggered for tests/drivers/gpio/gpio_basic_api on microchip mec15xxevb_assy6853 board |
| * :github:`22930` - PTS: Test Framework :Bluetooth: SM/MAS/PKE/BV-01-C INCONCLUSIV |
| * :github:`22929` - PTS: Test Framework :Bluetooth: SM/SLA/SIP/BV-01-C Error |
| * :github:`22928` - PTS: Test Framework: Bluetooth: SM/MAS/SIGN/BV-03-C, SM/MAS/SIGN/BI-01-C - INCONCLUSIV |
| * :github:`22927` - PTS: Test Framework: Bluetooth: SM/MAS/SIP/BV-02-C-INCONCLUSIV |
| * :github:`22926` - Bluetooth: Cannot establish security and discover GATT when using Split LL |
| * :github:`22914` - tests/arch/arm/arm_irq_vector_table crashes for nRF5340 |
| * :github:`22912` - [Coverity CID :208406] Macro compares unsigned to 0 in subsys/net/l2/ppp/ppp_l2.c |
| * :github:`22902` - eth_mcux_phy_setup called before ENET clock being enabled causes CPU to hang |
| * :github:`22893` - Problem using 3 instances of SPIM on NRF52840 |
| * :github:`22890` - IP networking does not work on ATSAME70 Rev. B |
| * :github:`22888` - Can't flash test image into iotdk board. |
| * :github:`22885` - Sanitycheck timeout all test cases on mec15xxevb_assy6853 board. |
| * :github:`22874` - sanitycheck: when someone instance get stuck because of concurrent.futures.TimeoutErro exception, it always stuck |
| * :github:`22858` - WDT_DISABLE_AT_BOOT, if enabled by default, degrades functionality of the watchdog |
| * :github:`22855` - drivers: enc28j60: waits for wrong interrupt |
| * :github:`22847` - Test gpio_basic_api hangs on cc3220sf_launchxl |
| * :github:`22828` - kernel: fatal: interrupts left locked in TEST mode |
| * :github:`22822` - mesh: typo in condition in comp_add_elem of cfg_srv |
| * :github:`22819` - #define _current in kernel_structs.h leaks into global namespace |
| * :github:`22814` - mcuboot doesn't build with zephyr v2.1.0 |
| * :github:`22803` - k_delayed_work_cancel documentation inconsistent with behavior |
| * :github:`22801` - Bluetooth: Split LL: Reconnection problem |
| * :github:`22786` - Bluetooth: SM/MAS/PROT/BV-01-C FAIL |
| * :github:`22784` - system hangs in settings_load() nrf52840 custom board |
| * :github:`22774` - Set USB version to 2.1 when CONFIG_USB_DEVICE_BOS is set |
| * :github:`22730` - CONFIG_BT_SETTINGS writes bt/hash to storage twice |
| * :github:`22722` - posix: redefinition of symbols while porting zeromq to zephyr |
| * :github:`22720` - armv8-m: userspace: some parts in userspace enter sequence need to be atomic |
| * :github:`22698` - log_stack_usage: prints err: missinglog_strdup() |
| * :github:`22697` - nrf52 telnet_shell panic. Mutex using in ISR. |
| * :github:`22693` - net: config: build break when CONFIG_NET_NATIVE=n |
| * :github:`22689` - driver: modem: sara-u2 error when connecting |
| * :github:`22685` - armv8-m: userspace: syscall return sequence needs to be atomic |
| * :github:`22682` - arm: cortex-a: no default board for testing |
| * :github:`22660` - gpio: legacy level interrupt disable API not backwards compatible |
| * :github:`22658` - [Coverity CID :208189] Self assignment in soc/xtensa/intel_apl_adsp/soc.c |
| * :github:`22657` - [Coverity CID :208191] Dereference after null check in subsys/canbus/isotp/isotp.c |
| * :github:`22656` - [Coverity CID :208192] Out-of-bounds access in tests/subsys/canbus/isotp/implementation/src/main.c |
| * :github:`22655` - [Coverity CID :208193] Unchecked return value in tests/bluetooth/mesh/src/microbit.c |
| * :github:`22654` - [Coverity CID :208194] Arguments in wrong order in tests/subsys/canbus/isotp/implementation/src/main.c |
| * :github:`22653` - [Coverity CID :208196] Out-of-bounds access in drivers/eeprom/eeprom_simulator.c |
| * :github:`22652` - [Coverity CID :208197] Pointless string comparison in tests/drivers/gpio/gpio_basic_api/src/main.c |
| * :github:`22651` - [Coverity CID :208198] Logical vs. bitwise operator in boards/xtensa/up_squared_adsp/bootloader/boot_loader.c |
| * :github:`22650` - [Coverity CID :208199] Arguments in wrong order in tests/subsys/canbus/isotp/conformance/src/main.c |
| * :github:`22649` - [Coverity CID :208200] Bad bit shift operation in drivers/interrupt_controller/intc_exti_stm32.c |
| * :github:`22648` - [Coverity CID :208201] Out-of-bounds write in soc/xtensa/intel_apl_adsp/soc.c |
| * :github:`22647` - [Coverity CID :208202] Arguments in wrong order in samples/subsys/canbus/isotp/src/main.c |
| * :github:`22646` - [Coverity CID :208203] Missing break in switch in drivers/interrupt_controller/intc_exti_stm32.c |
| * :github:`22645` - [Coverity CID :208204] Arguments in wrong order in samples/subsys/canbus/isotp/src/main.c |
| * :github:`22644` - [Coverity CID :208205] Improper use of negative value in tests/subsys/canbus/isotp/implementation/src/main.c |
| * :github:`22642` - [Coverity CID :208207] Arguments in wrong order in tests/subsys/canbus/isotp/conformance/src/main.c |
| * :github:`22641` - [Coverity CID :208208] Arguments in wrong order in tests/subsys/canbus/isotp/implementation/src/main.c |
| * :github:`22640` - [Coverity CID :208209] 'Constant' variable guards dead code in drivers/gpio/gpio_sx1509b.c |
| * :github:`22636` - Provide Linux-style IS_ERR()/PTR_ERR()/ERR_PTR() helpers |
| * :github:`22626` - tests/drivers/counter/counter_basic_api failed on frdm_k64f board. |
| * :github:`22624` - tests/kernel/semaphore/semaphore failed on iotdk board. |
| * :github:`22623` - tests/kernel/timer/timer_api failed on mimxrt1050_evk board. |
| * :github:`22616` - Zephyr doesn't build if x86_64 SDK toolchain isn't install |
| * :github:`22584` - drivers: spi: spi_mcux_dspi: bus busy status ignored in async |
| * :github:`22563` - Common west flash/debug etc. arguments cannot be set in CMake |
| * :github:`22559` - crash in semaphore tests on ARC nsim_em and nsim_sem |
| * :github:`22557` - document guidelines/principles related to DT usage in Zephyr |
| * :github:`22556` - document DT macro generation rules |
| * :github:`22543` - No way to address a particular FTDI for OpenOCD |
| * :github:`22542` - GEN_ABSOLUTE_SYM cannot handle value larger than INT_MAX on qemu_x86_64 |
| * :github:`22539` - bt_gatt: unable to save SC: no cfg left |
| * :github:`22535` - drivers: lora: Make the SX1276 driver independent of loramac module |
| * :github:`22534` - sanitycheck qemu_x86_coverage problem with SDK 0.11.1 |
| * :github:`22532` - Doc build warning lvgl/README.rst |
| * :github:`22525` - stm32f7xx.h: No such file or directory |
| * :github:`22522` - GPIO test code tests/drivers/gpio/gpio_basic_api does not compile for microchip board mec15xxevb_assy6853 |
| * :github:`22519` - sanitycheck failures for native_posix |
| * :github:`22514` - Bluetooth: gatt: CCC cfg not flushed if device was previously paired |
| * :github:`22510` - Build warnings in samples/net/cloud/google_iot_mqtt |
| * :github:`22489` - Request to enable CONFIG_NET_PKT_RXTIME_STATS for SOCK_RAW |
| * :github:`22486` - Do we have driver for Texas Instruments DRV2605 haptic driver for ERM and LRA actuators? |
| * :github:`22484` - Linker error when building google_iot_mqtt sample with zephyr-sdk 0.11.1 |
| * :github:`22482` - Unable to use LOG_BACKEND_DEFINE macro from log_backend.h using C++ |
| * :github:`22478` - Bluetooth - peripheral_dis - settings_runtime_set not working |
| * :github:`22474` - boards that have Kconfig warnings on hello_world. |
| * :github:`22466` - Add hx711 sensor |
| * :github:`22462` - onoff: why client must be reinitialized after each transition |
| * :github:`22455` - How to assign USB endpoint address manually in stm32f4_disco for CDC ACM class driver |
| * :github:`22452` - not driver found in can bus samples for olimexino_stm32 |
| * :github:`22447` - samples: echo_client sample breaks for UDP when larger than net if MTU |
| * :github:`22444` - [Coverity CID :207963] Argument cannot be negative in tests/net/socket/websocket/src/main.c |
| * :github:`22443` - [Coverity CID :207964] Dereference after null check in subsys/canbus/canopen/CO_driver.c |
| * :github:`22442` - [Coverity CID :207965] Missing break in switch in drivers/i2c/i2c_ll_stm32_v1.c |
| * :github:`22440` - [Coverity CID :207970] Out-of-bounds access in samples/net/sockets/websocket_client/src/main.c |
| * :github:`22439` - [Coverity CID :207971] Negative array index read in subsys/net/l2/ppp/ipcp.c |
| * :github:`22438` - [Coverity CID :207973] Out-of-bounds access in tests/net/socket/websocket/src/main.c |
| * :github:`22437` - [Coverity CID :207974] Out-of-bounds read in tests/net/socket/websocket/src/main.c |
| * :github:`22436` - [Coverity CID :207975] Logically dead code in subsys/net/l2/ppp/ipcp.c |
| * :github:`22435` - [Coverity CID :207977] Logically dead code in subsys/canbus/canopen/CO_driver.c |
| * :github:`22434` - [Coverity CID :207978] Dereference after null check in subsys/canbus/canopen/CO_driver.c |
| * :github:`22433` - [Coverity CID :207980] Untrusted loop bound in tests/net/socket/websocket/src/main.c |
| * :github:`22432` - [Coverity CID :207982] Explicit null dereferenced in tests/lib/onoff/src/main.c |
| * :github:`22430` - [Coverity CID :207985] Argument cannot be negative in subsys/net/lib/websocket/websocket.c |
| * :github:`22424` - RFC: API Change: clock_control |
| * :github:`22417` - Build warnings with atsamr21_xpro |
| * :github:`22410` - arch: arm64: ARM64 port not working on real target |
| * :github:`22390` - Unable to build http_get with TLS enabled on cc32xx |
| * :github:`22388` - Build warnings in http_get on cc3220sf_launchxl |
| * :github:`22366` - Bug in sockets.c (subsys\net\lib\sockets) |
| * :github:`22363` - drivers: clock_control: clock_stm32_ll_h7.c Move Power Configuration code |
| * :github:`22360` - test_mqtt_disconnect in mqtt_pubsub fails |
| * :github:`22356` - An application hook for early init |
| * :github:`22343` - stm32f303 - irq conflict between CAN and USB |
| * :github:`22317` - samples/arc_secure_services fails on nsim_sem |
| * :github:`22316` - samples/philosophers coop_only scenario times out on nsim_sem and nsim_em |
| * :github:`22307` - net: ip: net_pkt_pull(): packet corruption when using CONFIG_NET_BUF_DATA_SIZE larger than 256 |
| * :github:`22304` - ARM Cortex-M STMF401RE: execution too slow |
| * :github:`22299` - The file flash_stm32wbx.c generates compilation error |
| * :github:`22297` - nucleo_wb55rg:samples/bluetooth/peripheral/sample.bluetooth.peripheral fails to build on master |
| * :github:`22290` - ARC crashes due to concurrent system calls |
| * :github:`22280` - incorrect linker routing |
| * :github:`22275` - arm: cortex-R & M: CONFIG_USERSPACE: intermittent Memory region write access failures |
| * :github:`22272` - aggregated devicetree source file needs to be restored to build directory |
| * :github:`22268` - timer not working when duration is too high |
| * :github:`22265` - Simultaneous BLE pairings getting the same slot in keys structure |
| * :github:`22259` - Bluetooth: default value 80 on BT_ACL_RX_COUNT clamped to 64 |
| * :github:`22258` - sanitycheck fails to merge OVERLAY_CONFIG properly |
| * :github:`22257` - test wdt_basic_api failed on nucleo_f746zg |
| * :github:`22245` - STM32G4xx: Wrong SystemCoreClock variable |
| * :github:`22243` - stm32g431rb: PLL setting result to slow exccution |
| * :github:`22210` - Bluetooth - bt_gatt_get_value_attr_by_uuid |
| * :github:`22207` - Bluetooth ：Mesh：Provison init should after proxy |
| * :github:`22204` - CONFIG_BT_DEBUG_LOG vs atomic operations |
| * :github:`22202` - bt_rand() is called over HCI when BT_HOST_CRYPTO=y, even if BT_CTLR_LE_ENC=n |
| * :github:`22197` - dts: gen_defines.py bails out on new path property type |
| * :github:`22188` - drivers: espi: xec : eSPI driver should not send VWire SUS_ACK automatically in all cases |
| * :github:`22177` - Adafruit M0 boards are not set up to correctly flash in their code partitions |
| * :github:`22171` - West bossac runner inorrectly tries to include an offset parameter when flashing |
| * :github:`22128` - frdm_k82f:samples/drivers/spi_fujitsu_fram/sample.drivers.spi.fujitsu_fram fails |
| * :github:`22107` - mdns support with avahi as client |
| * :github:`22106` - intermittent emulator exit on samples/userspace/shared_mem on qemu_x86_64 |
| * :github:`22088` - Bluetooth Mesh friendship is cleared due to no Friend response reception |
| * :github:`22086` - L2CAP/SMP: Race condition possible in native posix central when bonding. |
| * :github:`22085` - HCI/CCO/BV-07-C & HCI/GEV/BV-01-C failing in EDTT |
| * :github:`22066` - tests/kernel/mem_pool/mem_pool_threadsafe fails reliably on m2gl025_miv |
| * :github:`22062` - Adafruit Feather M0 does not flash correctly - incorrect flash code offset and bossa version incompatibility |
| * :github:`22060` - Build fails with gnuarmemb under windows |
| * :github:`22051` - Bluetooth Central: Discovery of 128bit primary service fails with later versions of gcc. |
| * :github:`22048` - Failing LL.TS Data Length Update Tests (split) |
| * :github:`22037` - qemu_cortex_r5 excludes too many tests |
| * :github:`22036` - sanitycheck for qemu_cortex_r5 fails |
| * :github:`22026` - west: openocd runner fails for boards without support/openocd.cfg |
| * :github:`22014` - RTC prescaler overflow on nRF(52) |
| * :github:`22010` - Bluetooth 'central' failure on native_posix |
| * :github:`22003` - 'central' failure on nrf52_pca10040 |
| * :github:`21996` - Native POSIX or QEMU X86 emulation does not detect Bluetooth HCI Vendor-Specific Extensions |
| * :github:`21989` - websocket: recv_msg always returns full message length on last call |
| * :github:`21974` - make include hierarchy consistent with expected usage |
| * :github:`21970` - net: dns: mDNS resolving fails when responder is also enabled |
| * :github:`21967` - json: json_obj_parse will modify the input string |
| * :github:`21962` - drivers: usb: usb_dc_stm32: does not compile for stm32f3_disco board |
| * :github:`21949` - net: TCP: echo server deadlock from TCP packet |
| * :github:`21935` - SPI - STM32: transceive() should handle null tx buffer |
| * :github:`21917` - cmake error with CONFIG_COUNTER and CONFIG_BT both enabled (nrf52 board) |
| * :github:`21914` - net: dns: Answers to multiple mDNS queries sent in parallel aren't properly handled |
| * :github:`21888` - Print unmet Kconfig dependency |
| * :github:`21875` - sanitycheck warning for silabs,gecko-spi-usart.yaml |
| * :github:`21869` - IPv6 neighbors get added too eagerly |
| * :github:`21859` - Bluetooth LE Disconnect event not received |
| * :github:`21854` - HCI-UART: Bluetooth ACL data packets with 251 bytes not acknowledged |
| * :github:`21846` - RFC: API: Counter: counter_read() has no way of indicating failure |
| * :github:`21837` - net: socket: Add dependency to mbedtls |
| * :github:`21813` - tests/kernel/timer/timer_api failed on frdm_k64f board. |
| * :github:`21812` - tests/arch/arm/arm_irq_advanced_features failed on reel_board. |
| * :github:`21800` - Xtensa doesn't save SCOMPARE1 register on context switch |
| * :github:`21790` - tests/kernel/timer/timer_api fails on nucleo_g071rb board |
| * :github:`21789` - Merge topic-gpio back to master |
| * :github:`21784` - sanitycheck prints some build errors directly to the console |
| * :github:`21780` - OpenThread fails on nRF52840 Dongle (nrf52840_pca10059) |
| * :github:`21775` - echo_server and 802154 not build for NRF52811 |
| * :github:`21768` - Make [CONFIG_NET_SOCKETS_SOCKOPT_TLS] dependent on [CONFIG_MBEDTLS] in menuconfig |
| * :github:`21764` - [SARA-R4] MQTT publisher not working - Impossible to connect to broker |
| * :github:`21763` - at86rf2xx radio driver does not report whether a TX was ACKed |
| * :github:`21756` - tests/kernel/obj_tracing failed on mec15xxevb_assy6853 board. |
| * :github:`21755` - tests/drivers/adc/adc_api failed on mec15xxevb_assy6853 board. |
| * :github:`21745` - tests: counter_basic_api: Failed on stm32 based boards |
| * :github:`21744` - dumb_http_server_mt with overlay-tls.conf does not connect |
| * :github:`21735` - ARM: Cortex-M: IRQ lock/unlock() API non-functional but accessible from user mode |
| * :github:`21716` - nucleo_g431rb: Hello world not working |
| * :github:`21715` - nucleo_g431rb: Blinky too slow / wrong clock setup? |
| * :github:`21713` - CDC ACM USB class issue with high transfer rate and ZLP |
| * :github:`21702` - [Coverity CID :206599] Out-of-bounds access in tests/bluetooth/uuid/src/main.c |
| * :github:`21700` - [Coverity CID :206606] Out-of-bounds access in tests/bluetooth/uuid/src/main.c |
| * :github:`21699` - [Coverity CID :206608] Dereference null return value in tests/net/icmpv4/src/main.c |
| * :github:`21695` - Documentation issues on v1.14-branch block backport |
| * :github:`21681` - nucleo_g431rb / STM32G4: Flashing works only once |
| * :github:`21679` - SPI broken on stm32f412 on master |
| * :github:`21676` - [Coverity CID :206389] Logically dead code in subsys/testsuite/ztest/src/ztest.c |
| * :github:`21674` - [Coverity CID :206392] Side effect in assertion in tests/kernel/timer/starve/src/main.c |
| * :github:`21673` - [Coverity CID :206393] Unintentional integer overflow in drivers/sensor/ms5607/ms5607.c |
| * :github:`21672` - [Coverity CID :206394] Logically dead code in subsys/testsuite/ztest/src/ztest.c |
| * :github:`21660` - Sample projects do not build for Nucleo WB55RG |
| * :github:`21659` - at86rf2xx radio driver not (reliably) sending ACKs |
| * :github:`21650` - _TEXT_SECTION_NAME_2 on ARM Cortex-R |
| * :github:`21637` - sanitycheck failed issue in parallel running. |
| * :github:`21629` - error with 'west update' on Windows 10 |
| * :github:`21623` - DT: accept standard syntax for phandle in chosen node |
| * :github:`21618` - CI failing to complete tests |
| * :github:`21617` - Allow per module prj.conf |
| * :github:`21614` - host toolchain for x86 fails on empty CMAKE_C_FLAGS |
| * :github:`21607` - BME680 Sensor is not building |
| * :github:`21601` - '!radio_is_ready()' failed |
| * :github:`21599` - CONFIG_HEAP_MEM_POOL_SIZE and k_malloc, k_free not working in nrf51_pca10028 |
| * :github:`21597` - sht3xd build error on olimexino_stm32 |
| * :github:`21591` - Timeout error for the Microchip board during Sanitycheck |
| * :github:`21586` - Bluetooth Mesh fail to transmit messages after some time on nRF52840 |
| * :github:`21581` - GNU ARM Embedded link broken in Getting Started |
| * :github:`21571` - CONFIG_BT_CENTRAL doesnot work fine with nrf51_pca10028 |
| * :github:`21570` - how to select usb mps for SAME70 board |
| * :github:`21568` - mps2_an385:tests/kernel/tickless/tickless_concept/kernel.tickless.concept fail |
| * :github:`21552` - Constant disconnects while attempting BT LE multi-central application. |
| * :github:`21551` - gpio: xec: GPIO Interrupt is not triggered for range GPIO240_276 |
| * :github:`21546` - SPI broken for STM32L1 |
| * :github:`21536` - tests/subsys/fs/fat_fs_api fails on native_posix_64 |
| * :github:`21532` - can not build the image ,No targets specified and no makefile found |
| * :github:`21514` - Logging - strange behaviour with RTT on nRF53 |
| * :github:`21510` - re-v |
| * :github:`21493` - System tick is not running |
| * :github:`21483` - sanitycheck messages in CI are not informative anymore |
| * :github:`21475` - sanitycheck: hardware map generation unexpected exit during the first attempt |
| * :github:`21466` - doc: extract_content.py not copying images in a table |
| * :github:`21450` - sample.net.cloud.google_iot_mqtt test is failing for frdm_k64f |
| * :github:`21448` - nrf52840 errata_98 / 89 mixup |
| * :github:`21443` - "HCI_USB" sample doesn't compile with "nucleo_wb55rg" board |
| * :github:`21438` - sanitycheck reports "FAILED: N/A" for failed or hung tests |
| * :github:`21432` - watchdog subsystem has no system calls |
| * :github:`21431` - missing async uart.h system calls |
| * :github:`21429` - Impossible to override syscalls |
| * :github:`21426` - civetweb triggers an error on Windows with Git 2.24 |
| * :github:`21422` - Added nucleo-f767zi board support and would like to share |
| * :github:`21419` - RFC: API Change: usb: Make users call usb_enable. Provide global status callback. |
| * :github:`21418` - Crash when suspending system |
| * :github:`21410` - bt_ctlr_hci: Tx Buffer Overflow on LL/CON/MAS/BV-04-C, LL/CON/SLA/BV-05-C & LL/CON/SLA/BV-06-C |
| * :github:`21409` - sanitycheck: cmd.exe colorized output |
| * :github:`21385` - board frdm_kl25z build passed, but can't flash |
| * :github:`21384` - RFC: API Change: PWM: add support for inverted PWM signals |
| * :github:`21379` - Bluetooth: Mesh: Node Reset Not Clear Bind Key Information |
| * :github:`21375` - GATT: gatt_write_ccc_rsp with error (0x0e) removes always beginning from subscriptions head |
| * :github:`21365` - implicit casts in API headers must be replaced for C++ support |
| * :github:`21351` - tests/drivers/counter/counter_basic_api failed on mimxrt1050_evk board. |
| * :github:`21341` - conditions required for safe call of kernel operations from interrupts |
| * :github:`21339` - Expired IPv6 router causes an infinite loop |
| * :github:`21335` - net: TCP: Socket echo server does not accept incoming connections when TLS is enabled |
| * :github:`21328` - Apparent network context leak with offloading driver (u-blox Sara r4) |
| * :github:`21325` - Where should the Digital-Input, Output, ADC driver be added? |
| * :github:`21321` - error update for project civetweb |
| * :github:`21318` - CONFIG_SYS_POWER_MANAGEMENT Makes Build Fail for nRF5340 and nRF9160 |
| * :github:`21317` - intermittent SMP crashes on x86_64 |
| * :github:`21306` - ARC: syscall register save/restore needs backport to 1.14 |
| * :github:`21301` - Coverage report generated for qemu_x86 board is incomplete |
| * :github:`21300` - pyocd flash failing on bbc_microbit |
| * :github:`21299` - bluetooth: Controller does not release buffer on central side after peripheral reset |
| * :github:`21290` - Compiler warnings in flash.h: invalid conversion from 'const void*' to 'const flash_driver_api*' |
| * :github:`21281` - logging: msg_free may erroneously call log_free |
| * :github:`21278` - How to use pwm in nrf52832 for rgb led |
| * :github:`21275` - kl2x soc fixup is missing I2C_1 labels |
| * :github:`21257` - tests/net/net_pkt failed on mimxrt1050_evk board. |
| * :github:`21240` - Error west flash |
| * :github:`21229` - cc1plus: warning: '-Werror=' argument '-Werror=implicit-int' is not valid for C++ |
| * :github:`21202` - Required upgrade of HAL |
| * :github:`21186` - Gatt discover callback gives invalid pointer to primary and secondary service UUID. |
| * :github:`21185` - zero-latency IRQ behavior is not documented? |
| * :github:`21181` - devicetree should support making properties with defaults required |
| * :github:`21177` - Long ATT MTU reports wrong length field in write callback. |
| * :github:`21171` - Module Request: Optiga Trust X |
| * :github:`21167` - libraries.libc.newlib test fails |
| * :github:`21165` - Bluetooth: Mesh: Friend Clear message from a Friend node |
| * :github:`21162` - Sanitycheck corrupted test case names in test-report.xml files |
| * :github:`21161` - question: openthread with other boards |
| * :github:`21148` - nrf51: uart_1 does not compile |
| * :github:`21139` - west: runners: blackmagicprobe: Keyboard Interrupt shouldn't kill the process |
| * :github:`21131` - Bluetooth: host: Subscriptions not removed upon unpair |
| * :github:`21126` - drivers: spi_nrfx_spim: Incorrect handling of extended SPIM configuration |
| * :github:`21123` - sanitycheck halt some test cases with parallel running. |
| * :github:`21121` - netusb: RNDIS host support |
| * :github:`21115` - Request a new repository for the Xtensa HAL |
| * :github:`21105` - Bluetooth API called before finished initialization. |
| * :github:`21103` - Bluetooth: host: Reduce overhead of GATT subscriptions |
| * :github:`21099` - echo server qemu_x86 e1000 cannot generate coverage reports |
| * :github:`21095` - [Coverity CID :206086] Out-of-bounds access in drivers/timer/cortex_m_systick.c |
| * :github:`21094` - native_posix doesn't call main function that's defined in C++ |
| * :github:`21082` - tests/kernel/timer/timer_api failing on several nRF5x SoCs |
| * :github:`21074` - Enhance 802.1Qav documentation |
| * :github:`21058` - BLE: Enable/Disable Automatic sending of Connection Parameter update request on Timeout. |
| * :github:`21057` - BLE: No Valid Parameter check in send_conn_le_param_update() |
| * :github:`21045` - log_backend.h missing include for UTIL_CAT in LOG_BACKEND_DEFINE macro |
| * :github:`21036` - Add SMP function similar to bt_conn_get_info |
| * :github:`21025` - sam_e70_xplained reboots after 35secs |
| * :github:`20981` - mempool: MPU fault |
| * :github:`20974` - file resources exceeded with sanitycheck |
| * :github:`20953` - usb: nrf: usb on reel board becomes unavailable if USB cable is not connected at first |
| * :github:`20927` - ztest_1cpu_user_unit_test() doesn't work |
| * :github:`20915` - doc: Kconfig section in board_porting.rst should be moved or removed |
| * :github:`20904` - kernel.timer.tickless is failed due to missing TEST_USERSPACE flag |
| * :github:`20886` - [Coverity CID :205826] Memory - corruptions in tests/subsys/fs/nffs_fs_api/common/nffs_test_utils.c |
| * :github:`20885` - [Coverity CID :205819] Memory - corruptions in tests/subsys/fs/nffs_fs_api/common/nffs_test_utils.c |
| * :github:`20884` - [Coverity CID :205799] Memory - corruptions in tests/subsys/fs/nffs_fs_api/common/nffs_test_utils.c |
| * :github:`20877` - [Coverity CID :205823] Null pointer dereferences in tests/kernel/fifo/fifo_timeout/src/main.c |
| * :github:`20802` - reschedule not done after mutex unlock |
| * :github:`20770` - irq locking in logging backend can cause missing interrupts |
| * :github:`20755` - mcuboot: add as module and verify functionality |
| * :github:`20749` - samples:sample.net.dns_resolve.mdns:frdmk64f ipv4dns handler has not result |
| * :github:`20748` - build warnings on lpcxpresso54114_m0/m4 board |
| * :github:`20746` - Bluetooth: Mesh: Friend node Adding another Friend Update |
| * :github:`20724` - Packed pointer warning in LL Controller |
| * :github:`20698` - Bluetooth: host: Skip pre-scan done by bt_conn_create_le if not needed |
| * :github:`20697` - Confusing warning during cmake |
| * :github:`20673` - guiconfig not working properly? |
| * :github:`20640` - Bluetooth: l2cap do not recover when faced with long packets and run out of buffers |
| * :github:`20629` - when CONFIG_BT_SETTINGS is enabled, stack stores id in flash memory each power up of device (call to bt_enable) |
| * :github:`20618` - Can unicast address be relayed when send message over gatt proxy? |
| * :github:`20576` - DTS overlay files must include full path name |
| * :github:`20561` - Crypto API: Separate IV from ciphertext based on struct cipher_ctx::flags |
| * :github:`20535` - [Coverity CID :205619]Null pointer dereferences in /tests/net/ieee802154/fragment/src/main.c |
| * :github:`20497` - [Coverity CID :205638]Integer handling issues in /drivers/pwm/pwm_mchp_xec.c |
| * :github:`20490` - [Coverity CID :205651]Uninitialized variables in /drivers/dma/dma_stm32.c |
| * :github:`20484` - Tests/kernel/gen_isr_table failing when enabling WDT driver |
| * :github:`20426` - sensors: grove temperature and light drivers out of date |
| * :github:`20414` - nRF51 issues with the split link layer |
| * :github:`20411` - samples: lis3mdl trigger not working with x_nucleo_iks01a1 |
| * :github:`20388` - Allow for runtime reconfiguration of SPI master / slave |
| * :github:`20355` - west build for zephyr/samples/net/sockets/echo_server/ on qemu_xtensa target outputs elf with panic |
| * :github:`20315` - zperf TCP uploader fails |
| * :github:`20286` - Problem building for ESP32 |
| * :github:`20278` - Something is wrong when trying ST7789V sample |
| * :github:`20264` - Bluetooth: Delay advertising events instead of dropping them on collision |
| * :github:`20256` - settings subsystem sample |
| * :github:`20217` - Extend qemu_cortex_r5 test coverage |
| * :github:`20172` - devicetree support for compound elements |
| * :github:`20161` - Facing issue to setup zephyr on ubuntu |
| * :github:`20153` - BLE small throughput |
| * :github:`20140` - CMake: syscall macro's are not generated for out of tree DTS_ROOT |
| * :github:`20125` - Add system call to enter low power mode and reduce latency for deep sleep entry |
| * :github:`20026` - sanitycheck corrupts stty in some cases |
| * :github:`20017` - Convert GPIO users to new GPIO API |
| * :github:`19982` - Periodically wake up log process thread consume more power |
| * :github:`19922` - Linear time to give L2CAP credits |
| * :github:`19869` - Implement tickless capability for xlnx_psttc_timer |
| * :github:`19761` - tests/net/ieee802154/fragment failed on reel board. |
| * :github:`19737` - No Function In Zephyr For Reading BLE Channel Map? |
| * :github:`19666` - remove kernel/include and ``arch/*/include`` from default include path |
| * :github:`19643` - samples/boards/arc_secure_services fails on nsim_sem |
| * :github:`19545` - usb: obtain configuration descriptor's bmAttributes and bMaxPower from DT |
| * :github:`19540` - Allow running and testing network samples in automatic way |
| * :github:`19492` - sanitycheck: unreliable/inconsistent catch of ASSERTION FAILED |
| * :github:`19488` - Reference and sample codes to get started with the friendship feature in ble mesh |
| * :github:`19473` - Missing NULL parameter check in k_pipe_get |
| * :github:`19361` - BLE Scan fails to start when running in parallel with BLE mesh |
| * :github:`19342` - Bluetooth: Mesh: Persistent storage of Virtual Addresses |
| * :github:`19245` - Logging: Assert with LOG_IMMEDIATE |
| * :github:`19100` - LwM2M sample with DTLS: does not connect |
| * :github:`19053` - 2.1 Release Checklist |
| * :github:`18962` - [Coverity CID :203909]Memory - corruptions in /subsys/mgmt/smp_shell.c |
| * :github:`18867` - zsock_poll() unnecessarily wait when querying for ZSOCK_POLLOUT |
| * :github:`18852` - west flash fails for cc1352r_launchxl |
| * :github:`18635` - isr4 repeatedly gets triggered after test passes in tests/kernel/gen_isr_table |
| * :github:`18583` - hci_usb: NRF52840 connecting addtional peripheral fails |
| * :github:`18551` - address-of-temporary idiom not allowed in C++ |
| * :github:`18530` - Convert GPIO drivers to new GPIO API |
| * :github:`18483` - Bluetooth: length variable inconsistency in keys.c |
| * :github:`18452` - [Coverity CID :203463]Memory - corruptions in /tests/lib/ringbuffer/src/main.c |
| * :github:`18447` - [Coverity CID :203400]Integer handling issues in /tests/lib/fdtable/src/main.c |
| * :github:`18410` - [Coverity CID :203448]Memory - corruptions in /subsys/net/lib/lwm2m/ipso_onoff_switch.c |
| * :github:`18378` - [Coverity CID :203537]Error handling issues in /samples/subsys/nvs/src/main.c |
| * :github:`18280` - tests/drivers/adc/adc_api fails on frdmkl25z |
| * :github:`18173` - ARM: Core Stack Improvements/Bug fixes for 2.1 release |
| * :github:`18169` - dts: bindings: inconsistent file names and base.yaml include of general device controllers |
| * :github:`18137` - Add section on IRQ generation to doc/guides/dts/index.rst |
| * :github:`17852` - Cmsis_rtos_v2_apis test failed on iotdk board. |
| * :github:`17838` - state DEVICE_PM_LOW_POWER_STATE of Device Power Management |
| * :github:`17787` - openocd unable to flash hello_world to cc26x2r1_launchxl |
| * :github:`17731` - Dynamically set TX power of BLE Radio |
| * :github:`17689` - On missing sensor, Init hangs |
| * :github:`17543` - dtc version 1.4.5 with ubuntu 18.04 and zephyr sdk-0.10.1 |
| * :github:`17310` - boards: shields: use Kconfig.defconfig system for shields |
| * :github:`17309` - enhancements to device tree generation |
| * :github:`17102` - RFC: rework GPIO interrupt configuration |
| * :github:`16935` - Zephyr doc website: Delay search in /boards to the end of the search. |
| * :github:`16851` - west flash error on zephyr v1.14.99 |
| * :github:`16735` - smp_svr sample does not discover services |
| * :github:`16545` - west: diagnose dependency version failures |
| * :github:`16482` - mcumgr seems to compromise BT security |
| * :github:`16472` - tinycrypt ecc-dh and ecc-dsa should not select entropy generator |
| * :github:`16329` - ztest teardown function not called if test function is interrupted |
| * :github:`16239` - Build: C++ compiler warning '-Wold-style-definition' |
| * :github:`16235` - STM32: Move STM32 Flash driver to CMSIS STM32Cube definitions |
| * :github:`16232` - STM32: implement pinmux api |
| * :github:`16202` - Improve help for west build target |
| * :github:`16034` - Net packet size of 64 bytes doesn't work. |
| * :github:`16023` - mcuboot: enabling USB functionality in MCUboot crashes zephyr application in slot0 |
| * :github:`16011` - Increase coverage of tests |
| * :github:`15906` - WEST ERROR: extension command build was improperly defined |
| * :github:`15841` - Support AT86RF233 |
| * :github:`15729` - flash: should write_protection be emulated? |
| * :github:`15657` - properly define kernel <--> arch APIs |
| * :github:`15611` - gpio/pinctrl: GPIO and introduce PINCTRL API to support gpio, pinctrl DTS nodes |
| * :github:`15593` - How to use gdb to view the stack of a thread |
| * :github:`15580` - SAMD21 Adafruit examples no longer run on boards |
| * :github:`15435` - device fails to boot when spi max frequency set above 1000000 |
| * :github:`15278` - CANopen Support |
| * :github:`15229` - network tests have extremely restrictive whitelist |
| * :github:`15171` - BLE Throughput |
| * :github:`14927` - checkpatch: not expected behavior for multiple git commit check. |
| * :github:`14922` - samples/boards/altera_max10/pio: Error configuring GPIO PORT |
| * :github:`14753` - nrf52840_pca10056: Leading spurious 0x00 byte in UART output |
| * :github:`14668` - net: icmp4: Zephyr strips record route and time stamp options |
| * :github:`14650` - missing system calls in Counter driver APIs |
| * :github:`14639` - All tests should be SMP-safe |
| * :github:`14632` - Default for TLS_PEER_VERIFY socket option are set to required, may lead to confusion when running samples against self-signed certs |
| * :github:`14621` - BLE controller: Add support for Controller(SW deferred)-based Privacy |
| * :github:`14287` - USB HID Get_Report and Set_Report |
| * :github:`14206` - user mode documentation enhancements |
| * :github:`13991` - net: Spurious driver errors due to feeding packets into IP stack when it's not fully initialized (assumed reason) |
| * :github:`13943` - net: QEMU Ethernet drivers are flaky (seemingly after "net_buf" refactor) |
| * :github:`13941` - Alternatives for OpenThread settings |
| * :github:`13894` - stm32f429i_disc1: Add DTS for USB controller |
| * :github:`13403` - USBD event and composite-device handling |
| * :github:`13232` - native_posix doc: Add mention of virtual USB |
| * :github:`13151` - Update documentation on linking Zephyr within a flash partition |
| * :github:`12968` - dfu/mcuboot: solution for Set pending: don't crash when image slot corrupt |
| * :github:`12860` - No test builds these files |
| * :github:`12814` - TCP connet Net Shell function seems to not working when using NET_SOCKETS_OFFLOAD |
| * :github:`12635` - tests/subsys/fs/nffs_fs_api/common/nffs_test_utils.c fail with Assertion failure on nrf52840 |
| * :github:`12553` - List of tests that keep failing sporadically |
| * :github:`12537` - potential over-use of k_spinlock |
| * :github:`12490` - Produced ELF does not follow the linux ELF spec |
| * :github:`12359` - Default address selection for IPv6 should follow RFC 6724 |
| * :github:`12331` - Proposal to improve the settings subsystem |
| * :github:`12134` - I cannot see a Zephyr way to change the clock frequency at runtime |
| * :github:`12130` - Is zephyr targeting high-end phone or pc doing open ended computation on the roadmap? |
| * :github:`12027` - Make icount work for real on x86_64 |
| * :github:`11751` - Rework exception & fatal error handling framework |
| * :github:`11519` - Add at least build test for cc1200 |
| * :github:`11490` - setup_ipv6() treats event enums as bitmasks |
| * :github:`11296` - Possible ways to implement clock synchronisation over BLE |
| * :github:`11213` - NFFS: Handle unexpected Power Off |
| * :github:`11172` - ARM Cortex A Architecture support - ARMv8-A |
| * :github:`10996` - Add device tree support for usb controllers on x86 |
| * :github:`10821` - ELCE: DT, Kconfig, EDTS path forward |
| * :github:`10534` - Can we get rid of zephyr-env.sh? |
| * :github:`10423` - log_core.h error on pointer-to-int-cast on 64bit system |
| * :github:`10339` - gpio: Cleanup flags |
| * :github:`10305` - RFC: Add pin mask for gpio_port_xxx |
| * :github:`9947` - CMake build architecture documentation |
| * :github:`9904` - System timer handling with low-frequency timers |
| * :github:`9873` - External flash driver for the MX25Rxx |
| * :github:`9748` - NFFS issue after many writes by btsettings |
| * :github:`9506` - Ztest becomes unresponsive while running SMP tests |
| * :github:`9349` - Support IPv6 privacy extension RFC 4941 |
| * :github:`9333` - Support for STM32 L1-series |
| * :github:`9330` - network: clean up / implement supervisor to manage net services |
| * :github:`9194` - generated syscall header files don't have ifndef protection |
| * :github:`8833` - OpenThread: Minimal Thread Device (MTD) option is not building |
| * :github:`8539` - Categorize Kconfig options in documentation |
| * :github:`8262` - [Bluetooth] MPU FAULT on sdu_recv |
| * :github:`8242` - File system (littlefs & FAT) examples |
| * :github:`8236` - DTS Debugging is difficult |
| * :github:`7305` - CMake improvements to modularize gperf targets |
| * :github:`6866` - build: requirements: No module named yaml and elftools |
| * :github:`6562` - Question: Is QP™ Real-Time Frameworks/RTOS or libev supported in Zephyr? Or any plan? |
| * :github:`6521` - Scheduler needs spinlock-based synchronization |
| * :github:`6496` - Question: Is dynamical module loader supported in Zephyr? Or any plan? |
| * :github:`6389` - OpenThread: otPlatRandomGetTrue() implementation is not up to spec, may lead to security issues |
| * :github:`6327` - doc: GPIO_INT config option dependencies aren't clear |
| * :github:`6293` - Refining Zephyr's Device Driver Model |
| * :github:`6157` - SMP lacks low-power idle |
| * :github:`6084` - api: pinmux/gpio: It isn't possible to set pins as input and output simultaneously |
| * :github:`5943` - OT: utilsFlashWrite does not take into account the write-block-size |
| * :github:`5695` - C++ Support doesn't work |
| * :github:`5436` - Add LoRa Radio Support |
| * :github:`5027` - Enhance Testing and Test Coverage |
| * :github:`4973` - Provide Linux-style ERR_PTR/PTR_ERR/IS_ERR macros |
| * :github:`4951` - Prevent full rebuilds on Kconfig changes |
| * :github:`4917` - Reintroduce generic "outputexports" target after CMake migration |
| * :github:`4830` - device tree: generate pinmux |
| * :github:`3943` - x86: scope SMAP support in Zephyr |
| * :github:`3866` - To optimize the layout of the meta data of mem_slab & mem_pool |
| * :github:`3810` - application/kernel rodata split |
| * :github:`3717` - purge linker scripts of macro-based meta-language |
| * :github:`3701` - xtensa: scope MPU enabling |
| * :github:`3636` - Define region data structures exposed by linker script |
| * :github:`3490` - Move stm32 boards dts file to linux dts naming rules |
| * :github:`3488` - Dissociate board names from device tree file names |
| * :github:`3469` - Unify flash and code configuration across targets |
| * :github:`3429` - Add TSL2560 ambient light sensor driver |
| * :github:`3428` - Add HTU21D humidity sensor driver |
| * :github:`3427` - Add MPL3115A2 pressure sensor driver |
| * :github:`3397` - LLDP: Implement local MIB support for optional TLVs |
| * :github:`3276` - Dynamic Frequency Scaling |
| * :github:`3156` - xtensa: Support C++ |
| * :github:`3098` - extend tests/kernel/arm_irq_vector_table to other platforms |
| * :github:`3044` - How to create a Zephyr ROM library |
| * :github:`2925` - cross-platform support for interrupt tables/code in RAM or ROM |
| * :github:`2814` - Add proper support for running Zephyr without a system clock |
| * :github:`2807` - remove sprintf() and it's brethen |
| * :github:`2664` - Running SanityCheck in Windows |
| * :github:`2338` - ICMPv6 "Packet Too Big" support |
| * :github:`2307` - DHCPv6 |
| * :github:`1903` - Wi-Fi Host Stack |
| * :github:`1897` - Thread over BLE |
| * :github:`1583` - NFFS requires 1-byte unaligned accesses to flash |
| * :github:`1511` - qemu_nios2 should use the GHRD design |
| * :github:`1468` - Move NATS support from sample to a library + API |
| * :github:`1205` - C++ usage |
