| /* |
| * Copyright (c) 2018 blik GmbH |
| * Copyright (c) 2018, NXP |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #define DT_DRV_COMPAT nxp_kinetis_rtc |
| |
| #include <zephyr/drivers/counter.h> |
| #include <zephyr/irq.h> |
| #include <zephyr/kernel.h> |
| #include <zephyr/sys_clock.h> |
| #include <fsl_rtc.h> |
| #include <zephyr/logging/log.h> |
| |
| LOG_MODULE_REGISTER(mcux_rtc, CONFIG_COUNTER_LOG_LEVEL); |
| |
| struct mcux_rtc_data { |
| counter_alarm_callback_t alarm_callback; |
| counter_top_callback_t top_callback; |
| void *alarm_user_data; |
| void *top_user_data; |
| }; |
| |
| struct mcux_rtc_config { |
| struct counter_config_info info; |
| RTC_Type *base; |
| void (*irq_config_func)(const struct device *dev); |
| }; |
| |
| static int mcux_rtc_start(const struct device *dev) |
| { |
| const struct counter_config_info *info = dev->config; |
| const struct mcux_rtc_config *config = |
| CONTAINER_OF(info, struct mcux_rtc_config, info); |
| |
| RTC_StartTimer(config->base); |
| RTC_EnableInterrupts(config->base, |
| kRTC_AlarmInterruptEnable | |
| kRTC_TimeOverflowInterruptEnable | |
| kRTC_TimeInvalidInterruptEnable); |
| |
| return 0; |
| } |
| |
| static int mcux_rtc_stop(const struct device *dev) |
| { |
| const struct counter_config_info *info = dev->config; |
| const struct mcux_rtc_config *config = |
| CONTAINER_OF(info, struct mcux_rtc_config, info); |
| |
| RTC_DisableInterrupts(config->base, |
| kRTC_AlarmInterruptEnable | |
| kRTC_TimeOverflowInterruptEnable | |
| kRTC_TimeInvalidInterruptEnable); |
| RTC_StopTimer(config->base); |
| |
| /* clear out any set alarms */ |
| config->base->TAR = 0; |
| |
| return 0; |
| } |
| |
| static uint32_t mcux_rtc_read(const struct device *dev) |
| { |
| const struct counter_config_info *info = dev->config; |
| const struct mcux_rtc_config *config = |
| CONTAINER_OF(info, struct mcux_rtc_config, info); |
| |
| uint32_t ticks = config->base->TSR; |
| |
| /* |
| * Read TSR seconds twice in case it glitches during an update. |
| * This can happen when a read occurs at the time the register is |
| * incrementing. |
| */ |
| if (config->base->TSR == ticks) { |
| return ticks; |
| } |
| |
| ticks = config->base->TSR; |
| |
| return ticks; |
| } |
| |
| static int mcux_rtc_get_value(const struct device *dev, uint32_t *ticks) |
| { |
| *ticks = mcux_rtc_read(dev); |
| return 0; |
| } |
| |
| static int mcux_rtc_set_alarm(const struct device *dev, uint8_t chan_id, |
| const struct counter_alarm_cfg *alarm_cfg) |
| { |
| const struct counter_config_info *info = dev->config; |
| const struct mcux_rtc_config *config = |
| CONTAINER_OF(info, struct mcux_rtc_config, info); |
| struct mcux_rtc_data *data = dev->data; |
| |
| uint32_t ticks = alarm_cfg->ticks; |
| uint32_t current = mcux_rtc_read(dev); |
| |
| LOG_DBG("Current time is %d ticks", current); |
| |
| if (chan_id != 0U) { |
| LOG_ERR("Invalid channel id"); |
| return -EINVAL; |
| } |
| |
| if (data->alarm_callback != NULL) { |
| return -EBUSY; |
| } |
| |
| if ((alarm_cfg->flags & COUNTER_ALARM_CFG_ABSOLUTE) == 0) { |
| ticks += current; |
| } |
| |
| if (ticks < current) { |
| LOG_ERR("Alarm cannot be earlier than current time"); |
| return -EINVAL; |
| } |
| |
| data->alarm_callback = alarm_cfg->callback; |
| data->alarm_user_data = alarm_cfg->user_data; |
| |
| config->base->TAR = ticks; |
| LOG_DBG("Alarm set to %d ticks", ticks); |
| |
| return 0; |
| } |
| |
| static int mcux_rtc_cancel_alarm(const struct device *dev, uint8_t chan_id) |
| { |
| struct mcux_rtc_data *data = dev->data; |
| |
| if (chan_id != 0U) { |
| LOG_ERR("Invalid channel id"); |
| return -EINVAL; |
| } |
| |
| data->alarm_callback = NULL; |
| |
| return 0; |
| } |
| |
| static int mcux_rtc_set_top_value(const struct device *dev, |
| const struct counter_top_cfg *cfg) |
| { |
| const struct counter_config_info *info = dev->config; |
| const struct mcux_rtc_config *config = |
| CONTAINER_OF(info, struct mcux_rtc_config, info); |
| struct mcux_rtc_data *data = dev->data; |
| |
| if (cfg->ticks != info->max_top_value) { |
| LOG_ERR("Wrap can only be set to 0x%x.", info->max_top_value); |
| return -ENOTSUP; |
| } |
| |
| if (!(cfg->flags & COUNTER_TOP_CFG_DONT_RESET)) { |
| RTC_StopTimer(config->base); |
| config->base->TSR = 0; |
| RTC_StartTimer(config->base); |
| } |
| |
| data->top_callback = cfg->callback; |
| data->top_user_data = cfg->user_data; |
| |
| return 0; |
| } |
| |
| static uint32_t mcux_rtc_get_pending_int(const struct device *dev) |
| { |
| const struct counter_config_info *info = dev->config; |
| const struct mcux_rtc_config *config = |
| CONTAINER_OF(info, struct mcux_rtc_config, info); |
| |
| return RTC_GetStatusFlags(config->base) & RTC_SR_TAF_MASK; |
| } |
| |
| static uint32_t mcux_rtc_get_top_value(const struct device *dev) |
| { |
| const struct counter_config_info *info = dev->config; |
| |
| return info->max_top_value; |
| } |
| |
| static void mcux_rtc_isr(const struct device *dev) |
| { |
| const struct counter_config_info *info = dev->config; |
| const struct mcux_rtc_config *config = |
| CONTAINER_OF(info, struct mcux_rtc_config, info); |
| struct mcux_rtc_data *data = dev->data; |
| counter_alarm_callback_t cb; |
| uint32_t current = mcux_rtc_read(dev); |
| |
| |
| LOG_DBG("Current time is %d ticks", current); |
| |
| if ((RTC_GetStatusFlags(config->base) & RTC_SR_TAF_MASK) && |
| (data->alarm_callback)) { |
| cb = data->alarm_callback; |
| data->alarm_callback = NULL; |
| cb(dev, 0, current, data->alarm_user_data); |
| } |
| |
| if ((RTC_GetStatusFlags(config->base) & RTC_SR_TOF_MASK) && |
| (data->top_callback)) { |
| data->top_callback(dev, data->top_user_data); |
| } |
| |
| /* |
| * Clear any conditions to ack the IRQ |
| * |
| * callback may have already reset the alarm flag if a new |
| * alarm value was programmed to the TAR |
| */ |
| RTC_StopTimer(config->base); |
| if (RTC_GetStatusFlags(config->base) & RTC_SR_TAF_MASK) { |
| RTC_ClearStatusFlags(config->base, kRTC_AlarmFlag); |
| } else if (RTC_GetStatusFlags(config->base) & RTC_SR_TIF_MASK) { |
| RTC_ClearStatusFlags(config->base, kRTC_TimeInvalidFlag); |
| } else if (RTC_GetStatusFlags(config->base) & RTC_SR_TOF_MASK) { |
| RTC_ClearStatusFlags(config->base, kRTC_TimeOverflowFlag); |
| } |
| RTC_StartTimer(config->base); |
| } |
| |
| static int mcux_rtc_init(const struct device *dev) |
| { |
| const struct counter_config_info *info = dev->config; |
| const struct mcux_rtc_config *config = |
| CONTAINER_OF(info, struct mcux_rtc_config, info); |
| rtc_config_t rtc_config; |
| |
| RTC_GetDefaultConfig(&rtc_config); |
| RTC_Init(config->base, &rtc_config); |
| |
| /* Enable 32kHz oscillator and wait for 1ms to settle */ |
| config->base->CR |= 0x100; |
| k_busy_wait(USEC_PER_MSEC); |
| |
| config->irq_config_func(dev); |
| |
| return 0; |
| } |
| |
| static const struct counter_driver_api mcux_rtc_driver_api = { |
| .start = mcux_rtc_start, |
| .stop = mcux_rtc_stop, |
| .get_value = mcux_rtc_get_value, |
| .set_alarm = mcux_rtc_set_alarm, |
| .cancel_alarm = mcux_rtc_cancel_alarm, |
| .set_top_value = mcux_rtc_set_top_value, |
| .get_pending_int = mcux_rtc_get_pending_int, |
| .get_top_value = mcux_rtc_get_top_value, |
| }; |
| |
| static struct mcux_rtc_data mcux_rtc_data_0; |
| |
| static void mcux_rtc_irq_config_0(const struct device *dev); |
| |
| static struct mcux_rtc_config mcux_rtc_config_0 = { |
| .base = (RTC_Type *)DT_INST_REG_ADDR(0), |
| .irq_config_func = mcux_rtc_irq_config_0, |
| .info = { |
| .max_top_value = UINT32_MAX, |
| .freq = DT_INST_PROP(0, clock_frequency) / |
| DT_INST_PROP(0, prescaler), |
| .flags = COUNTER_CONFIG_INFO_COUNT_UP, |
| .channels = 1, |
| }, |
| }; |
| |
| DEVICE_DT_INST_DEFINE(0, &mcux_rtc_init, NULL, |
| &mcux_rtc_data_0, &mcux_rtc_config_0.info, |
| POST_KERNEL, CONFIG_COUNTER_INIT_PRIORITY, |
| &mcux_rtc_driver_api); |
| |
| static void mcux_rtc_irq_config_0(const struct device *dev) |
| { |
| IRQ_CONNECT(DT_INST_IRQN(0), |
| DT_INST_IRQ(0, priority), |
| mcux_rtc_isr, DEVICE_DT_INST_GET(0), 0); |
| irq_enable(DT_INST_IRQN(0)); |
| } |