| /* |
| * Copyright (c) 2022 Esco Medical ApS |
| * Copyright (c) 2016 TDK Invensense |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <zephyr/device.h> |
| #include <zephyr/drivers/sensor.h> |
| #include <zephyr/sys/util.h> |
| #include "icm42670.h" |
| #include "icm42670_reg.h" |
| #include "icm42670_spi.h" |
| #include "icm42670_trigger.h" |
| |
| #include <zephyr/logging/log.h> |
| LOG_MODULE_DECLARE(ICM42670, CONFIG_SENSOR_LOG_LEVEL); |
| |
| static void icm42670_gpio_callback(const struct device *dev, struct gpio_callback *cb, |
| uint32_t pins) |
| { |
| ARG_UNUSED(dev); |
| ARG_UNUSED(pins); |
| |
| struct icm42670_data *data = CONTAINER_OF(cb, struct icm42670_data, gpio_cb); |
| |
| #if defined(CONFIG_ICM42670_TRIGGER_OWN_THREAD) |
| k_sem_give(&data->gpio_sem); |
| #elif defined(CONFIG_ICM42670_TRIGGER_GLOBAL_THREAD) |
| k_work_submit(&data->work); |
| #endif |
| } |
| |
| static void icm42670_thread_cb(const struct device *dev) |
| { |
| struct icm42670_data *data = dev->data; |
| const struct icm42670_config *cfg = dev->config; |
| |
| icm42670_lock(dev); |
| gpio_pin_interrupt_configure_dt(&cfg->gpio_int, GPIO_INT_DISABLE); |
| |
| if (data->data_ready_handler) { |
| data->data_ready_handler(dev, data->data_ready_trigger); |
| } |
| |
| gpio_pin_interrupt_configure_dt(&cfg->gpio_int, GPIO_INT_EDGE_TO_ACTIVE); |
| icm42670_unlock(dev); |
| } |
| |
| #if defined(CONFIG_ICM42670_TRIGGER_OWN_THREAD) |
| |
| static void icm42670_thread(void *p1, void *p2, void *p3) |
| { |
| ARG_UNUSED(p2); |
| ARG_UNUSED(p3); |
| |
| struct icm42670_data *data = p1; |
| |
| while (1) { |
| k_sem_take(&data->gpio_sem, K_FOREVER); |
| icm42670_thread_cb(data->dev); |
| } |
| } |
| |
| #elif defined(CONFIG_ICM42670_TRIGGER_GLOBAL_THREAD) |
| |
| static void icm42670_work_handler(struct k_work *work) |
| { |
| struct icm42670_data *data = CONTAINER_OF(work, struct icm42670_data, work); |
| |
| icm42670_thread_cb(data->dev); |
| } |
| |
| #endif |
| |
| int icm42670_trigger_set(const struct device *dev, const struct sensor_trigger *trig, |
| sensor_trigger_handler_t handler) |
| { |
| int res = 0; |
| struct icm42670_data *data = dev->data; |
| const struct icm42670_config *cfg = dev->config; |
| |
| if (!handler) { |
| return -EINVAL; |
| } |
| |
| icm42670_lock(dev); |
| gpio_pin_interrupt_configure_dt(&cfg->gpio_int, GPIO_INT_DISABLE); |
| |
| switch (trig->type) { |
| case SENSOR_TRIG_DATA_READY: |
| data->data_ready_handler = handler; |
| data->data_ready_trigger = trig; |
| break; |
| default: |
| res = -ENOTSUP; |
| break; |
| } |
| |
| icm42670_unlock(dev); |
| gpio_pin_interrupt_configure_dt(&cfg->gpio_int, GPIO_INT_EDGE_TO_ACTIVE); |
| |
| return res; |
| } |
| |
| int icm42670_trigger_init(const struct device *dev) |
| { |
| struct icm42670_data *data = dev->data; |
| const struct icm42670_config *cfg = dev->config; |
| int res = 0; |
| |
| if (!cfg->gpio_int.port) { |
| LOG_ERR("trigger enabled but no interrupt gpio supplied"); |
| return -ENODEV; |
| } |
| |
| if (!device_is_ready(cfg->gpio_int.port)) { |
| LOG_ERR("gpio_int gpio not ready"); |
| return -ENODEV; |
| } |
| |
| data->dev = dev; |
| gpio_pin_configure_dt(&cfg->gpio_int, GPIO_INPUT); |
| gpio_init_callback(&data->gpio_cb, icm42670_gpio_callback, BIT(cfg->gpio_int.pin)); |
| res = gpio_add_callback(cfg->gpio_int.port, &data->gpio_cb); |
| |
| if (res < 0) { |
| LOG_ERR("Failed to set gpio callback"); |
| return res; |
| } |
| |
| k_mutex_init(&data->mutex); |
| |
| #if defined(CONFIG_ICM42670_TRIGGER_OWN_THREAD) |
| k_sem_init(&data->gpio_sem, 0, K_SEM_MAX_LIMIT); |
| k_thread_create(&data->thread, data->thread_stack, CONFIG_ICM42670_THREAD_STACK_SIZE, |
| icm42670_thread, data, NULL, NULL, |
| K_PRIO_COOP(CONFIG_ICM42670_THREAD_PRIORITY), 0, K_NO_WAIT); |
| #elif defined(CONFIG_ICM42670_TRIGGER_GLOBAL_THREAD) |
| data->work.handler = icm42670_work_handler; |
| #endif |
| |
| return gpio_pin_interrupt_configure_dt(&cfg->gpio_int, GPIO_INT_EDGE_TO_ACTIVE); |
| } |
| |
| int icm42670_trigger_enable_interrupt(const struct device *dev) |
| { |
| int res; |
| const struct icm42670_config *cfg = dev->config; |
| |
| /* pulse-mode (auto clearing), push-pull and active-high */ |
| res = icm42670_spi_single_write(&cfg->spi, REG_INT_CONFIG, |
| BIT_INT1_DRIVE_CIRCUIT | BIT_INT1_POLARITY); |
| |
| if (res) { |
| return res; |
| } |
| |
| /* enable data ready interrupt on INT1 pin */ |
| return icm42670_spi_single_write(&cfg->spi, REG_INT_SOURCE0, BIT_INT_DRDY_INT1_EN); |
| } |
| |
| void icm42670_lock(const struct device *dev) |
| { |
| struct icm42670_data *data = dev->data; |
| |
| k_mutex_lock(&data->mutex, K_FOREVER); |
| } |
| |
| void icm42670_unlock(const struct device *dev) |
| { |
| struct icm42670_data *data = dev->data; |
| |
| k_mutex_unlock(&data->mutex); |
| } |