| #include <zephyr/dt-bindings/input/input-event-codes.h> |
| |
| / { |
| leds: leds { |
| compatible = "gpio-leds"; |
| rgb1_red: led_0 { |
| gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; |
| label = "0 LED_RGB_RED"; |
| }; |
| rgb1_green: led_1 { |
| gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>; |
| label = "0 LED_RGB_GREEN"; |
| }; |
| rgb1_blue: led_2 { |
| gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>; |
| label = "0 LED_RGB_BLUE"; |
| }; |
| rgb2_red: led_3 { |
| gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; |
| label = "1 LED_RGB_RED"; |
| }; |
| rgb2_green: led_4 { |
| gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; |
| label = "1 LED_RGB_GREEN"; |
| }; |
| rgb2_blue: led_5 { |
| gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>; |
| label = "1 LED_RGB_BLUE"; |
| }; |
| led1_blue: led_6 { |
| gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>; |
| label = "2 LED_MONO_BLUE"; |
| }; |
| led2_green: led_7 { |
| gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; |
| label = "3 LED_MONO_GREEN"; |
| }; |
| led3_green: led_8 { |
| gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; |
| label = "4 LED_MONO_GREEN"; |
| }; |
| }; |
| |
| buttons { |
| compatible = "gpio-keys"; |
| button_1_vol_dn: button_1_vol_dn { |
| gpios = <&gpio0 2 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>; |
| label = "Push button 1"; |
| zephyr,code = <INPUT_KEY_VOLUMEDOWN>; |
| }; |
| button_2_vol_up: button_2_vol_up { |
| gpios = <&gpio0 3 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>; |
| label = "Push button 2"; |
| zephyr,code = <INPUT_KEY_VOLUMEUP>; |
| }; |
| button3: button_3 { |
| gpios = <&gpio0 4 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>; |
| label = "Push button 3"; |
| zephyr,code = <INPUT_KEY_3>; |
| }; |
| button4: button_4 { |
| gpios = <&gpio0 6 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>; |
| label = "Push button 4"; |
| zephyr,code = <INPUT_KEY_4>; |
| }; |
| button5: button_5 { |
| gpios = <&gpio0 5 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>; |
| label = "Push button 5"; |
| zephyr,code = <INPUT_KEY_5>; |
| }; |
| }; |
| |
| arduino_header: connector { |
| compatible = "arduino-header-r3"; |
| #gpio-cells = <2>; |
| gpio-map-mask = <0xffffffff 0xffffffc0>; |
| gpio-map-pass-thru = <0 0x3f>; |
| gpio-map = <0 0 &gpio0 4 0>, /* A0 */ |
| <1 0 &gpio0 5 0>, /* A1 */ |
| <2 0 &gpio0 6 0>, /* A2 */ |
| <3 0 &gpio0 7 0>, /* A3 */ |
| <4 0 &gpio0 25 0>, /* A4 */ |
| <5 0 &gpio0 26 0>, /* A5 */ |
| <6 0 &gpio1 9 0>, /* D0 */ |
| <7 0 &gpio1 8 0>, /* D1 */ |
| <8 0 &gpio0 31 0>, /* D2 */ |
| <9 0 &gpio1 0 0>, /* D3 */ |
| <10 0 &gpio1 1 0>, /* D4 */ |
| <11 0 &gpio1 14 0>, /* D5 */ |
| <12 0 &gpio1 7 0>, /* D6 */ |
| <13 0 &gpio1 11 0>, /* D7 */ |
| <14 0 &gpio1 10 0>, /* D8 */ |
| <15 0 &gpio1 13 0>, /* D9 */ |
| <16 0 &gpio1 12 0>, /* D10 */ |
| <17 0 &gpio0 9 0>, /* D11 */ |
| <18 0 &gpio0 10 0>, /* D12 */ |
| <19 0 &gpio0 8 0>, /* D13 */ |
| <20 0 &gpio1 2 0>, /* D14 */ |
| <21 0 &gpio1 3 0>; /* D15 */ |
| }; |
| |
| aliases { |
| led0 = &rgb1_red; |
| led1 = &rgb1_green; |
| led2 = &rgb1_blue; |
| led3 = &rgb2_red; |
| led4 = &rgb2_green; |
| led5 = &rgb2_blue; |
| led6 = &led1_blue; |
| led7 = &led2_green; |
| led8 = &led3_green; |
| sw0 = &button_1_vol_dn; |
| sw1 = &button_2_vol_up; |
| sw2 = &button3; |
| sw3 = &button4; |
| sw4 = &button5; |
| mcuboot-led0 = &led1_blue; |
| mcuboot-button0 = &button3; |
| watchdog0 = &wdt0; |
| }; |
| }; |