| /** |
| * Copyright (c) 2015 - 2018, Nordic Semiconductor ASA |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright notice, this |
| * list of conditions and the following disclaimer. |
| * |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * |
| * 3. Neither the name of the copyright holder nor the names of its |
| * contributors may be used to endorse or promote products derived from this |
| * software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE |
| * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include <nrfx.h> |
| |
| #if NRFX_CHECK(NRFX_UART_ENABLED) |
| |
| #if !NRFX_CHECK(NRFX_UART0_ENABLED) |
| #error "No enabled UART instances. Check <nrfx_config.h>." |
| #endif |
| |
| #include <nrfx_uart.h> |
| #include "prs/nrfx_prs.h" |
| #include <hal/nrf_gpio.h> |
| |
| #define NRFX_LOG_MODULE UART |
| #include <nrfx_log.h> |
| |
| #define EVT_TO_STR(event) \ |
| (event == NRF_UART_EVENT_ERROR ? "NRF_UART_EVENT_ERROR" : \ |
| "UNKNOWN EVENT") |
| |
| |
| #define TX_COUNTER_ABORT_REQ_VALUE UINT32_MAX |
| |
| typedef struct |
| { |
| void * p_context; |
| nrfx_uart_event_handler_t handler; |
| uint8_t const * p_tx_buffer; |
| uint8_t * p_rx_buffer; |
| uint8_t * p_rx_secondary_buffer; |
| size_t tx_buffer_length; |
| size_t rx_buffer_length; |
| size_t rx_secondary_buffer_length; |
| volatile size_t tx_counter; |
| volatile size_t rx_counter; |
| volatile bool tx_abort; |
| bool rx_enabled; |
| nrfx_drv_state_t state; |
| } uart_control_block_t; |
| static uart_control_block_t m_cb[NRFX_UART_ENABLED_COUNT]; |
| |
| static void apply_config(nrfx_uart_t const * p_instance, |
| nrfx_uart_config_t const * p_config) |
| { |
| if (p_config->pseltxd != NRF_UART_PSEL_DISCONNECTED) |
| { |
| nrf_gpio_pin_set(p_config->pseltxd); |
| nrf_gpio_cfg_output(p_config->pseltxd); |
| } |
| if (p_config->pselrxd != NRF_UART_PSEL_DISCONNECTED) |
| { |
| nrf_gpio_cfg_input(p_config->pselrxd, NRF_GPIO_PIN_NOPULL); |
| } |
| |
| nrf_uart_baudrate_set(p_instance->p_reg, p_config->baudrate); |
| nrf_uart_configure(p_instance->p_reg, p_config->parity, p_config->hwfc); |
| nrf_uart_txrx_pins_set(p_instance->p_reg, p_config->pseltxd, p_config->pselrxd); |
| if (p_config->hwfc == NRF_UART_HWFC_ENABLED) |
| { |
| if (p_config->pselcts != NRF_UART_PSEL_DISCONNECTED) |
| { |
| nrf_gpio_cfg_input(p_config->pselcts, NRF_GPIO_PIN_NOPULL); |
| } |
| if (p_config->pselrts != NRF_UART_PSEL_DISCONNECTED) |
| { |
| nrf_gpio_pin_set(p_config->pselrts); |
| nrf_gpio_cfg_output(p_config->pselrts); |
| } |
| nrf_uart_hwfc_pins_set(p_instance->p_reg, p_config->pselrts, p_config->pselcts); |
| } |
| } |
| |
| static void interrupts_enable(nrfx_uart_t const * p_instance, |
| uint8_t interrupt_priority) |
| { |
| nrf_uart_event_clear(p_instance->p_reg, NRF_UART_EVENT_TXDRDY); |
| nrf_uart_event_clear(p_instance->p_reg, NRF_UART_EVENT_RXTO); |
| nrf_uart_int_enable(p_instance->p_reg, NRF_UART_INT_MASK_TXDRDY | |
| NRF_UART_INT_MASK_RXTO); |
| NRFX_IRQ_PRIORITY_SET(nrfx_get_irq_number((void *)p_instance->p_reg), |
| interrupt_priority); |
| NRFX_IRQ_ENABLE(nrfx_get_irq_number((void *)p_instance->p_reg)); |
| } |
| |
| static void interrupts_disable(nrfx_uart_t const * p_instance) |
| { |
| nrf_uart_int_disable(p_instance->p_reg, NRF_UART_INT_MASK_RXDRDY | |
| NRF_UART_INT_MASK_TXDRDY | |
| NRF_UART_INT_MASK_ERROR | |
| NRF_UART_INT_MASK_RXTO); |
| NRFX_IRQ_DISABLE(nrfx_get_irq_number((void *)p_instance->p_reg)); |
| } |
| |
| static void pins_to_default(nrfx_uart_t const * p_instance) |
| { |
| /* Reset pins to default states */ |
| uint32_t txd; |
| uint32_t rxd; |
| uint32_t rts; |
| uint32_t cts; |
| |
| txd = nrf_uart_tx_pin_get(p_instance->p_reg); |
| rxd = nrf_uart_rx_pin_get(p_instance->p_reg); |
| rts = nrf_uart_rts_pin_get(p_instance->p_reg); |
| cts = nrf_uart_cts_pin_get(p_instance->p_reg); |
| nrf_uart_txrx_pins_disconnect(p_instance->p_reg); |
| nrf_uart_hwfc_pins_disconnect(p_instance->p_reg); |
| |
| if (txd != NRF_UART_PSEL_DISCONNECTED) |
| { |
| nrf_gpio_cfg_default(txd); |
| } |
| if (rxd != NRF_UART_PSEL_DISCONNECTED) |
| { |
| nrf_gpio_cfg_default(rxd); |
| } |
| if (cts != NRF_UART_PSEL_DISCONNECTED) |
| { |
| nrf_gpio_cfg_default(cts); |
| } |
| if (rts != NRF_UART_PSEL_DISCONNECTED) |
| { |
| nrf_gpio_cfg_default(rts); |
| } |
| } |
| |
| nrfx_err_t nrfx_uart_init(nrfx_uart_t const * p_instance, |
| nrfx_uart_config_t const * p_config, |
| nrfx_uart_event_handler_t event_handler) |
| { |
| NRFX_ASSERT(p_config); |
| uart_control_block_t * p_cb = &m_cb[p_instance->drv_inst_idx]; |
| nrfx_err_t err_code = NRFX_SUCCESS; |
| |
| if (p_cb->state != NRFX_DRV_STATE_UNINITIALIZED) |
| { |
| err_code = NRFX_ERROR_INVALID_STATE; |
| NRFX_LOG_WARNING("Function: %s, error code: %s.", |
| __func__, |
| NRFX_LOG_ERROR_STRING_GET(err_code)); |
| return err_code; |
| } |
| |
| #if NRFX_CHECK(NRFX_PRS_ENABLED) |
| static nrfx_irq_handler_t const irq_handlers[NRFX_UART_ENABLED_COUNT] = { |
| #if NRFX_CHECK(NRFX_UART0_ENABLED) |
| nrfx_uart_0_irq_handler, |
| #endif |
| }; |
| if (nrfx_prs_acquire(p_instance->p_reg, |
| irq_handlers[p_instance->drv_inst_idx]) != NRFX_SUCCESS) |
| { |
| err_code = NRFX_ERROR_BUSY; |
| NRFX_LOG_WARNING("Function: %s, error code: %s.", |
| __func__, |
| NRFX_LOG_ERROR_STRING_GET(err_code)); |
| return err_code; |
| } |
| #endif // NRFX_CHECK(NRFX_PRS_ENABLED) |
| |
| apply_config(p_instance, p_config); |
| |
| p_cb->handler = event_handler; |
| p_cb->p_context = p_config->p_context; |
| |
| if (p_cb->handler) |
| { |
| interrupts_enable(p_instance, p_config->interrupt_priority); |
| } |
| |
| nrf_uart_enable(p_instance->p_reg); |
| p_cb->rx_buffer_length = 0; |
| p_cb->rx_secondary_buffer_length = 0; |
| p_cb->rx_enabled = false; |
| p_cb->tx_buffer_length = 0; |
| p_cb->state = NRFX_DRV_STATE_INITIALIZED; |
| NRFX_LOG_WARNING("Function: %s, error code: %s.", |
| __func__, |
| NRFX_LOG_ERROR_STRING_GET(err_code)); |
| return err_code; |
| } |
| |
| void nrfx_uart_uninit(nrfx_uart_t const * p_instance) |
| { |
| uart_control_block_t * p_cb = &m_cb[p_instance->drv_inst_idx]; |
| |
| nrf_uart_disable(p_instance->p_reg); |
| |
| if (p_cb->handler) |
| { |
| interrupts_disable(p_instance); |
| } |
| |
| pins_to_default(p_instance); |
| |
| #if NRFX_CHECK(NRFX_PRS_ENABLED) |
| nrfx_prs_release(p_instance->p_reg); |
| #endif |
| |
| p_cb->state = NRFX_DRV_STATE_UNINITIALIZED; |
| p_cb->handler = NULL; |
| NRFX_LOG_INFO("Instance uninitialized: %d.", p_instance->drv_inst_idx); |
| } |
| |
| static void tx_byte(NRF_UART_Type * p_uart, uart_control_block_t * p_cb) |
| { |
| nrf_uart_event_clear(p_uart, NRF_UART_EVENT_TXDRDY); |
| uint8_t txd = p_cb->p_tx_buffer[p_cb->tx_counter]; |
| p_cb->tx_counter++; |
| nrf_uart_txd_set(p_uart, txd); |
| } |
| |
| static bool tx_blocking(NRF_UART_Type * p_uart, uart_control_block_t * p_cb) |
| { |
| while (p_cb->tx_counter < p_cb->tx_buffer_length) |
| { |
| // Wait until the transmitter is ready to accept a new byte. |
| // Exit immediately if the transfer has been aborted. |
| while (!nrf_uart_event_check(p_uart, NRF_UART_EVENT_TXDRDY)) |
| { |
| if (p_cb->tx_abort) |
| { |
| return false; |
| } |
| } |
| |
| tx_byte(p_uart, p_cb); |
| } |
| |
| return true; |
| } |
| |
| nrfx_err_t nrfx_uart_tx(nrfx_uart_t const * p_instance, |
| uint8_t const * p_data, |
| size_t length) |
| { |
| uart_control_block_t * p_cb = &m_cb[p_instance->drv_inst_idx]; |
| NRFX_ASSERT(p_cb->state == NRFX_DRV_STATE_INITIALIZED); |
| NRFX_ASSERT(p_data); |
| NRFX_ASSERT(length > 0); |
| |
| nrfx_err_t err_code; |
| |
| if (nrfx_uart_tx_in_progress(p_instance)) |
| { |
| err_code = NRFX_ERROR_BUSY; |
| NRFX_LOG_WARNING("Function: %s, error code: %s.", |
| __func__, |
| NRFX_LOG_ERROR_STRING_GET(err_code)); |
| return err_code; |
| } |
| p_cb->tx_buffer_length = length; |
| p_cb->p_tx_buffer = p_data; |
| p_cb->tx_counter = 0; |
| p_cb->tx_abort = false; |
| |
| NRFX_LOG_INFO("Transfer tx_len: %d.", p_cb->tx_buffer_length); |
| NRFX_LOG_DEBUG("Tx data:"); |
| NRFX_LOG_HEXDUMP_DEBUG(p_cb->p_tx_buffer, |
| p_cb->tx_buffer_length * sizeof(p_cb->p_tx_buffer[0])); |
| |
| err_code = NRFX_SUCCESS; |
| |
| nrf_uart_event_clear(p_instance->p_reg, NRF_UART_EVENT_TXDRDY); |
| nrf_uart_task_trigger(p_instance->p_reg, NRF_UART_TASK_STARTTX); |
| |
| tx_byte(p_instance->p_reg, p_cb); |
| |
| if (p_cb->handler == NULL) |
| { |
| if (!tx_blocking(p_instance->p_reg, p_cb)) |
| { |
| // The transfer has been aborted. |
| err_code = NRFX_ERROR_FORBIDDEN; |
| } |
| else |
| { |
| // Wait until the last byte is completely transmitted. |
| while (!nrf_uart_event_check(p_instance->p_reg, NRF_UART_EVENT_TXDRDY)) |
| {} |
| nrf_uart_task_trigger(p_instance->p_reg, NRF_UART_TASK_STOPTX); |
| } |
| p_cb->tx_buffer_length = 0; |
| } |
| |
| NRFX_LOG_INFO("Function: %s, error code: %s.", __func__, NRFX_LOG_ERROR_STRING_GET(err_code)); |
| return err_code; |
| } |
| |
| bool nrfx_uart_tx_in_progress(nrfx_uart_t const * p_instance) |
| { |
| return (m_cb[p_instance->drv_inst_idx].tx_buffer_length != 0); |
| } |
| |
| static void rx_enable(nrfx_uart_t const * p_instance) |
| { |
| nrf_uart_event_clear(p_instance->p_reg, NRF_UART_EVENT_ERROR); |
| nrf_uart_event_clear(p_instance->p_reg, NRF_UART_EVENT_RXDRDY); |
| nrf_uart_task_trigger(p_instance->p_reg, NRF_UART_TASK_STARTRX); |
| } |
| |
| static void rx_byte(NRF_UART_Type * p_uart, uart_control_block_t * p_cb) |
| { |
| if (!p_cb->rx_buffer_length) |
| { |
| nrf_uart_event_clear(p_uart, NRF_UART_EVENT_RXDRDY); |
| // Byte received when buffer is not set - data lost. |
| (void) nrf_uart_rxd_get(p_uart); |
| return; |
| } |
| nrf_uart_event_clear(p_uart, NRF_UART_EVENT_RXDRDY); |
| p_cb->p_rx_buffer[p_cb->rx_counter] = nrf_uart_rxd_get(p_uart); |
| p_cb->rx_counter++; |
| } |
| |
| nrfx_err_t nrfx_uart_rx(nrfx_uart_t const * p_instance, |
| uint8_t * p_data, |
| size_t length) |
| { |
| uart_control_block_t * p_cb = &m_cb[p_instance->drv_inst_idx]; |
| |
| NRFX_ASSERT(m_cb[p_instance->drv_inst_idx].state == NRFX_DRV_STATE_INITIALIZED); |
| NRFX_ASSERT(p_data); |
| NRFX_ASSERT(length > 0); |
| |
| nrfx_err_t err_code; |
| |
| bool second_buffer = false; |
| |
| if (p_cb->handler) |
| { |
| nrf_uart_int_disable(p_instance->p_reg, NRF_UART_INT_MASK_RXDRDY | |
| NRF_UART_INT_MASK_ERROR); |
| } |
| if (p_cb->rx_buffer_length != 0) |
| { |
| if (p_cb->rx_secondary_buffer_length != 0) |
| { |
| if (p_cb->handler) |
| { |
| nrf_uart_int_enable(p_instance->p_reg, NRF_UART_INT_MASK_RXDRDY | |
| NRF_UART_INT_MASK_ERROR); |
| } |
| err_code = NRFX_ERROR_BUSY; |
| NRFX_LOG_WARNING("Function: %s, error code: %s.", |
| __func__, |
| NRFX_LOG_ERROR_STRING_GET(err_code)); |
| return err_code; |
| } |
| second_buffer = true; |
| } |
| |
| if (!second_buffer) |
| { |
| p_cb->rx_buffer_length = length; |
| p_cb->p_rx_buffer = p_data; |
| p_cb->rx_counter = 0; |
| p_cb->rx_secondary_buffer_length = 0; |
| } |
| else |
| { |
| p_cb->p_rx_secondary_buffer = p_data; |
| p_cb->rx_secondary_buffer_length = length; |
| } |
| |
| NRFX_LOG_INFO("Transfer rx_len: %d.", length); |
| |
| if ((!p_cb->rx_enabled) && (!second_buffer)) |
| { |
| rx_enable(p_instance); |
| } |
| |
| if (p_cb->handler == NULL) |
| { |
| nrf_uart_event_clear(p_instance->p_reg, NRF_UART_EVENT_RXTO); |
| |
| bool rxrdy; |
| bool rxto; |
| bool error; |
| do |
| { |
| do |
| { |
| error = nrf_uart_event_check(p_instance->p_reg, NRF_UART_EVENT_ERROR); |
| rxrdy = nrf_uart_event_check(p_instance->p_reg, NRF_UART_EVENT_RXDRDY); |
| rxto = nrf_uart_event_check(p_instance->p_reg, NRF_UART_EVENT_RXTO); |
| } while ((!rxrdy) && (!rxto) && (!error)); |
| |
| if (error || rxto) |
| { |
| break; |
| } |
| rx_byte(p_instance->p_reg, p_cb); |
| } while (p_cb->rx_buffer_length > p_cb->rx_counter); |
| |
| p_cb->rx_buffer_length = 0; |
| if (error) |
| { |
| err_code = NRFX_ERROR_INTERNAL; |
| NRFX_LOG_WARNING("Function: %s, error code: %s.", |
| __func__, |
| NRFX_LOG_ERROR_STRING_GET(err_code)); |
| return err_code; |
| } |
| |
| if (rxto) |
| { |
| err_code = NRFX_ERROR_FORBIDDEN; |
| NRFX_LOG_WARNING("Function: %s, error code: %s.", |
| __func__, |
| NRFX_LOG_ERROR_STRING_GET(err_code)); |
| return err_code; |
| } |
| |
| if (p_cb->rx_enabled) |
| { |
| nrf_uart_task_trigger(p_instance->p_reg, NRF_UART_TASK_STARTRX); |
| } |
| else |
| { |
| // Skip stopping RX if driver is forced to be enabled. |
| nrf_uart_task_trigger(p_instance->p_reg, NRF_UART_TASK_STOPRX); |
| } |
| } |
| else |
| { |
| nrf_uart_int_enable(p_instance->p_reg, NRF_UART_INT_MASK_RXDRDY | |
| NRF_UART_INT_MASK_ERROR); |
| } |
| err_code = NRFX_SUCCESS; |
| NRFX_LOG_INFO("Function: %s, error code: %s.", __func__, NRFX_LOG_ERROR_STRING_GET(err_code)); |
| return err_code; |
| } |
| |
| bool nrfx_uart_rx_ready(nrfx_uart_t const * p_instance) |
| { |
| return nrf_uart_event_check(p_instance->p_reg, NRF_UART_EVENT_RXDRDY); |
| } |
| |
| void nrfx_uart_rx_enable(nrfx_uart_t const * p_instance) |
| { |
| if (!m_cb[p_instance->drv_inst_idx].rx_enabled) |
| { |
| rx_enable(p_instance); |
| m_cb[p_instance->drv_inst_idx].rx_enabled = true; |
| } |
| } |
| |
| void nrfx_uart_rx_disable(nrfx_uart_t const * p_instance) |
| { |
| nrf_uart_task_trigger(p_instance->p_reg, NRF_UART_TASK_STOPRX); |
| m_cb[p_instance->drv_inst_idx].rx_enabled = false; |
| } |
| |
| uint32_t nrfx_uart_errorsrc_get(nrfx_uart_t const * p_instance) |
| { |
| nrf_uart_event_clear(p_instance->p_reg, NRF_UART_EVENT_ERROR); |
| return nrf_uart_errorsrc_get_and_clear(p_instance->p_reg); |
| } |
| |
| static void rx_done_event(uart_control_block_t * p_cb, |
| size_t bytes, |
| uint8_t * p_data) |
| { |
| nrfx_uart_event_t event; |
| |
| event.type = NRFX_UART_EVT_RX_DONE; |
| event.data.rxtx.bytes = bytes; |
| event.data.rxtx.p_data = p_data; |
| |
| p_cb->handler(&event, p_cb->p_context); |
| } |
| |
| static void tx_done_event(uart_control_block_t * p_cb, |
| size_t bytes) |
| { |
| nrfx_uart_event_t event; |
| |
| event.type = NRFX_UART_EVT_TX_DONE; |
| event.data.rxtx.bytes = bytes; |
| event.data.rxtx.p_data = (uint8_t *)p_cb->p_tx_buffer; |
| |
| p_cb->tx_buffer_length = 0; |
| |
| p_cb->handler(&event, p_cb->p_context); |
| } |
| |
| void nrfx_uart_tx_abort(nrfx_uart_t const * p_instance) |
| { |
| uart_control_block_t * p_cb = &m_cb[p_instance->drv_inst_idx]; |
| |
| p_cb->tx_abort = true; |
| nrf_uart_task_trigger(p_instance->p_reg, NRF_UART_TASK_STOPTX); |
| if (p_cb->handler) |
| { |
| tx_done_event(p_cb, p_cb->tx_counter); |
| } |
| |
| NRFX_LOG_INFO("TX transaction aborted."); |
| } |
| |
| void nrfx_uart_rx_abort(nrfx_uart_t const * p_instance) |
| { |
| nrf_uart_int_disable(p_instance->p_reg, NRF_UART_INT_MASK_RXDRDY | |
| NRF_UART_INT_MASK_ERROR); |
| nrf_uart_task_trigger(p_instance->p_reg, NRF_UART_TASK_STOPRX); |
| |
| NRFX_LOG_INFO("RX transaction aborted."); |
| } |
| |
| static void uart_irq_handler(NRF_UART_Type * p_uart, |
| uart_control_block_t * p_cb) |
| { |
| if (nrf_uart_int_enable_check(p_uart, NRF_UART_INT_MASK_ERROR) && |
| nrf_uart_event_check(p_uart, NRF_UART_EVENT_ERROR)) |
| { |
| nrfx_uart_event_t event; |
| nrf_uart_event_clear(p_uart, NRF_UART_EVENT_ERROR); |
| NRFX_LOG_DEBUG("Event: %s.", EVT_TO_STR(NRF_UART_EVENT_ERROR)); |
| nrf_uart_int_disable(p_uart, NRF_UART_INT_MASK_RXDRDY | |
| NRF_UART_INT_MASK_ERROR); |
| if (!p_cb->rx_enabled) |
| { |
| nrf_uart_task_trigger(p_uart, NRF_UART_TASK_STOPRX); |
| } |
| event.type = NRFX_UART_EVT_ERROR; |
| event.data.error.error_mask = nrf_uart_errorsrc_get_and_clear(p_uart); |
| event.data.error.rxtx.bytes = p_cb->rx_buffer_length; |
| event.data.error.rxtx.p_data = p_cb->p_rx_buffer; |
| |
| // Abort transfer. |
| p_cb->rx_buffer_length = 0; |
| p_cb->rx_secondary_buffer_length = 0; |
| |
| p_cb->handler(&event,p_cb->p_context); |
| } |
| else if (nrf_uart_int_enable_check(p_uart, NRF_UART_INT_MASK_RXDRDY) && |
| nrf_uart_event_check(p_uart, NRF_UART_EVENT_RXDRDY)) |
| { |
| rx_byte(p_uart, p_cb); |
| if (p_cb->rx_buffer_length == p_cb->rx_counter) |
| { |
| if (p_cb->rx_secondary_buffer_length) |
| { |
| uint8_t * p_data = p_cb->p_rx_buffer; |
| size_t rx_counter = p_cb->rx_counter; |
| |
| // Switch to secondary buffer. |
| p_cb->rx_buffer_length = p_cb->rx_secondary_buffer_length; |
| p_cb->p_rx_buffer = p_cb->p_rx_secondary_buffer; |
| p_cb->rx_secondary_buffer_length = 0; |
| p_cb->rx_counter = 0; |
| rx_done_event(p_cb, rx_counter, p_data); |
| } |
| else |
| { |
| if (!p_cb->rx_enabled) |
| { |
| nrf_uart_task_trigger(p_uart, NRF_UART_TASK_STOPRX); |
| } |
| nrf_uart_int_disable(p_uart, NRF_UART_INT_MASK_RXDRDY | |
| NRF_UART_INT_MASK_ERROR); |
| p_cb->rx_buffer_length = 0; |
| rx_done_event(p_cb, p_cb->rx_counter, p_cb->p_rx_buffer); |
| } |
| } |
| } |
| |
| if (nrf_uart_event_check(p_uart, NRF_UART_EVENT_TXDRDY)) |
| { |
| if (p_cb->tx_counter < p_cb->tx_buffer_length && |
| !p_cb->tx_abort) |
| { |
| tx_byte(p_uart, p_cb); |
| } |
| else |
| { |
| nrf_uart_event_clear(p_uart, NRF_UART_EVENT_TXDRDY); |
| if (p_cb->tx_buffer_length) |
| { |
| tx_done_event(p_cb, p_cb->tx_buffer_length); |
| } |
| } |
| } |
| |
| if (nrf_uart_event_check(p_uart, NRF_UART_EVENT_RXTO)) |
| { |
| nrf_uart_event_clear(p_uart, NRF_UART_EVENT_RXTO); |
| |
| // RXTO event may be triggered as a result of abort call. In th |
| if (p_cb->rx_enabled) |
| { |
| nrf_uart_task_trigger(p_uart, NRF_UART_TASK_STARTRX); |
| } |
| if (p_cb->rx_buffer_length) |
| { |
| p_cb->rx_buffer_length = 0; |
| rx_done_event(p_cb, p_cb->rx_counter, p_cb->p_rx_buffer); |
| } |
| } |
| } |
| |
| #if NRFX_CHECK(NRFX_UART0_ENABLED) |
| void nrfx_uart_0_irq_handler(void) |
| { |
| uart_irq_handler(NRF_UART0, &m_cb[NRFX_UART0_INST_IDX]); |
| } |
| #endif |
| |
| #endif // NRFX_CHECK(NRFX_UART_ENABLED) |