| /* |
| * Copyright (c) 2015 Intel Corporation. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * |
| * 1) Redistributions of source code must retain the above copyright notice, |
| * this list of conditions and the following disclaimer. |
| * |
| * 2) Redistributions in binary form must reproduce the above copyright notice, |
| * this list of conditions and the following disclaimer in the documentation |
| * and/or other materials provided with the distribution. |
| * |
| * 3) Neither the name of Intel Corporation nor the names of its contributors |
| * may be used to endorse or promote products derived from this software without |
| * specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE |
| * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| /** |
| * @file |
| * @brief Public PWM Driver APIs |
| */ |
| |
| #ifndef __PWM_H__ |
| #define __PWM_H__ |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| #define PWM_ACCESS_BY_PIN 0 |
| #define PWM_ACCESS_ALL 1 |
| |
| #include <stdint.h> |
| #include <stddef.h> |
| #include <device.h> |
| |
| /* driver API definition */ |
| typedef int (*pwm_config_t)(struct device *dev, int access_op, |
| uint32_t pwm, int flags); |
| typedef int (*pwm_set_values_t)(struct device *dev, int access_op, |
| uint32_t pwm, uint32_t on, uint32_t off); |
| typedef int (*pwm_set_duty_cycle_t)(struct device *dev, int access_op, |
| uint32_t pwm, uint8_t duty); |
| typedef int (*pwm_suspend_dev_t)(struct device *dev); |
| typedef int (*pwm_resume_dev_t)(struct device *dev); |
| |
| struct pwm_driver_api { |
| pwm_config_t config; |
| pwm_set_values_t set_values; |
| pwm_set_duty_cycle_t set_duty_cycle; |
| pwm_suspend_dev_t suspend; |
| pwm_resume_dev_t resume; |
| }; |
| |
| /** |
| * @brief Configure a single PWM output. |
| * |
| * @param dev Pointer to device structure for driver instance |
| * @param pwm PWM output |
| * @param flags PWM configuration flags |
| * |
| * @return DEV_OK if successful, otherwise failed. |
| */ |
| static inline int pwm_pin_configure(struct device *dev, uint8_t pwm, |
| int flags) |
| { |
| struct pwm_driver_api *api; |
| |
| api = (struct pwm_driver_api *)dev->driver_api; |
| return api->config(dev, PWM_ACCESS_BY_PIN, pwm, flags); |
| } |
| |
| /** |
| * @brief Set the ON/OFF values for a single PWM output. |
| * |
| * @param dev Pointer to device structure for driver instance |
| * @param pwm PWM output |
| * @param on ON value to set the PWM to |
| * @param off OFF value to set the PWM to |
| * |
| * @return DEV_OK if successful, otherwise failed. |
| */ |
| static inline int pwm_pin_set_values(struct device *dev, uint32_t pwm, |
| uint32_t on, uint32_t off) |
| { |
| struct pwm_driver_api *api; |
| |
| api = (struct pwm_driver_api *)dev->driver_api; |
| return api->set_values(dev, PWM_ACCESS_BY_PIN, pwm, on, off); |
| } |
| |
| /** |
| * @brief Set the duty cycle of a single PWM output. |
| * |
| * This overrides any ON/OFF values being set before. |
| * |
| * @param dev Pointer to device structure for driver instance. |
| * @param pwm PWM output |
| * @param duty Duty cycle to set the PWM to (in %, e.g. 50 => 50%) |
| * |
| * @return DEV_OK if successful, otherwise failed. |
| */ |
| static inline int pwm_pin_set_duty_cycle(struct device *dev, uint32_t pwm, |
| uint8_t duty) |
| { |
| struct pwm_driver_api *api; |
| |
| api = (struct pwm_driver_api *)dev->driver_api; |
| return api->set_duty_cycle(dev, PWM_ACCESS_BY_PIN, pwm, duty); |
| } |
| |
| /** |
| * @brief Configure all PWM outputs. |
| * |
| * @param dev Pointer to device structure for driver instance |
| * @param flags PWM configuration flags |
| * |
| * @return DEV_OK if successful, otherwise failed. |
| */ |
| static inline int pwm_all_configure(struct device *dev, int flags) |
| { |
| struct pwm_driver_api *api; |
| |
| api = (struct pwm_driver_api *)dev->driver_api; |
| return api->config(dev, PWM_ACCESS_ALL, 0, flags); |
| } |
| |
| /** |
| * @brief Set the ON/OFF values for all PWM outputs. |
| * |
| * @param dev Pointer to device structure for driver instance |
| * @param on ON value to set the PWM to |
| * @param off OFF value to set the PWM to |
| * |
| * @return DEV_OK if successful, otherwise failed. |
| */ |
| static inline int pwm_all_set_values(struct device *dev, |
| uint32_t on, uint32_t off) |
| { |
| struct pwm_driver_api *api; |
| |
| api = (struct pwm_driver_api *)dev->driver_api; |
| return api->set_values(dev, PWM_ACCESS_ALL, 0, on, off); |
| } |
| |
| /** |
| * @brief Set the duty cycle of all PWM outputs. |
| * |
| * This overrides any ON/OFF values being set before. |
| * |
| * @param dev Pointer to device structure for driver instance. |
| * @param duty Duty cycle to set the PWM to (in %, e.g. 50 => 50%) |
| * |
| * @return DEV_OK if successful, otherwise failed. |
| */ |
| static inline int pwm_all_set_duty_cycle(struct device *dev, uint8_t duty) |
| { |
| struct pwm_driver_api *api; |
| |
| api = (struct pwm_driver_api *)dev->driver_api; |
| return api->set_duty_cycle(dev, PWM_ACCESS_ALL, 0, duty); |
| } |
| |
| /** |
| * @brief Save the state of the device and go to low power state |
| * |
| * @param dev Pointer to device structure for driver instance. |
| * |
| * @return DEV_OK if successful, otherwise failed. |
| */ |
| static inline int pwm_suspend(struct device *dev) |
| { |
| struct pwm_driver_api *api; |
| |
| api = (struct pwm_driver_api *)dev->driver_api; |
| return api->suspend(dev); |
| } |
| |
| /** |
| * @brief Restore state stored during suspend and resume operation. |
| * |
| * @param dev Pointer to device structure for driver instance. |
| * |
| * @return DEV_OK if successful, otherwise failed. |
| */ |
| static inline int pwm_resume(struct device *dev) |
| { |
| struct pwm_driver_api *api; |
| |
| api = (struct pwm_driver_api *)dev->driver_api; |
| return api->resume(dev); |
| } |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* __PWM_H__ */ |