blob: 843192fe2cc1928708787149310d1a35d2940316 [file] [log] [blame]
.. _hifive1_revb:
SiFive HiFive1 Rev B
####################
Overview
********
The HiFive1 Rev B is an Arduino-compatible development board with
a SiFive FE310-G002 RISC-V SoC.
.. image:: img/hifive1_revb.jpg
:align: center
:alt: SiFive HiFive1 Rev B board
Programming and debugging
*************************
Building
========
Applications for the ``hifive1_revb`` board configuration can be built as usual
(see :ref:`build_an_application`) using the corresponding board name:
.. zephyr-app-commands::
:board: hifive1_revb
:goals: build
Flashing
========
The HiFive 1 Rev B uses Segger J-Link OB for flashing and debugging. To flash and
debug the board, you'll need to install the
`Segger J-Link Software and Documentation Pack
<https://www.segger.com/downloads/jlink#J-LinkSoftwareAndDocumentationPack>`_
and choose version V6.46a or later (Downloads for Windows, Linux, and macOS are
available).
With the Segger J-Link Software installed, you can flash the application as usual
(see :ref:`build_an_application` and :ref:`application_run` for more details):
.. code-block:: console
west flash
Debugging
=========
Refer to the detailed overview about :ref:`application_debugging`.