blob: 1c05c902c13d51e4f0f3139bed76947ecd1c4ff5 [file] [log] [blame]
/*
* Copyright (c) 2022 KT-Elektronik, Klaucke und Partner GmbH
* SPDX-License-Identifier: Apache-2.0
*/
/**
* @file
*
* Counter driver for the Quad Timer through the MCUxpresso SDK. Based mainly on counter_mcux_gpt.c
*
* Each quad timer module has four channels (0-3) that can operate independently, but the Zephyr
* counter-API does not support starting or stopping different channels independently. Hence, each
* channel is represented as an independent counter device.
*/
#include <zephyr/drivers/counter.h>
#include <zephyr/drivers/clock_control.h>
#include <zephyr/irq.h>
#include <fsl_qtmr.h>
#include <zephyr/logging/log.h>
LOG_MODULE_REGISTER(mcux_qtmr, CONFIG_COUNTER_LOG_LEVEL);
struct mcux_qtmr_config {
/* info must be first element */
struct counter_config_info info;
const struct device *clock_dev;
clock_control_subsys_t clock_subsys;
TMR_Type *base;
clock_name_t clock_source;
qtmr_channel_selection_t channel;
qtmr_config_t qtmr_config;
qtmr_counting_mode_t mode;
};
struct mcux_qtmr_data {
counter_alarm_callback_t alarm_callback;
counter_top_callback_t top_callback;
void *alarm_user_data;
void *top_user_data;
qtmr_status_flags_t interrupt_mask;
uint32_t freq;
};
/* Only one interrupt per QTMR module. Each of which has four timers. */
#define DT_DRV_COMPAT nxp_imx_qtmr
/**
* @brief ISR for a specific timer channel
*
* @param dev timer channel device
*/
void mcux_qtmr_timer_handler(const struct device *dev, uint32_t status)
{
const struct mcux_qtmr_config *config = dev->config;
struct mcux_qtmr_data *data = dev->data;
uint32_t current = QTMR_GetCurrentTimerCount(config->base, config->channel);
QTMR_ClearStatusFlags(config->base, config->channel, status);
__DSB();
if ((status & kQTMR_Compare1Flag) && data->alarm_callback) {
QTMR_DisableInterrupts(config->base, config->channel,
kQTMR_Compare1InterruptEnable);
data->interrupt_mask &= ~kQTMR_Compare1InterruptEnable;
counter_alarm_callback_t alarm_cb = data->alarm_callback;
data->alarm_callback = NULL;
alarm_cb(dev, config->channel, current, data->alarm_user_data);
}
if ((status & kQTMR_OverflowFlag) && data->top_callback) {
data->top_callback(dev, data->top_user_data);
}
}
/**
* @brief ISR for the QTMR
*
* @param timers array containing the counter devices for each channel of the timer module
*/
static void mcux_qtmr_isr(const struct device *timers[])
{
/* the interrupt can be triggered by any of the four channels of the QTMR. Check status
* of all channels and trigger the ISR for the channel(s) that has/have triggered the
* interrupt.
*/
for (qtmr_channel_selection_t ch = kQTMR_Channel_0; ch <= kQTMR_Channel_3 ; ch++) {
if (timers[ch] != NULL) {
const struct mcux_qtmr_config *config = timers[ch]->config;
struct mcux_qtmr_data *data = timers[ch]->data;
uint32_t channel_status = QTMR_GetStatus(config->base, ch);
if ((channel_status & data->interrupt_mask) != 0) {
mcux_qtmr_timer_handler(timers[ch], channel_status);
}
}
}
}
#define INIT_TIMER(node_id) [DT_PROP(node_id, channel)] = DEVICE_DT_GET(node_id),
#define QTMR_DEVICE_INIT_MCUX(n) \
static const struct device *const timers_##n[4] = { \
DT_FOREACH_CHILD_STATUS_OKAY(DT_DRV_INST(n), INIT_TIMER) \
}; \
static int init_irq_##n(const struct device *dev) \
{ \
IRQ_CONNECT(DT_INST_IRQN(n), DT_INST_IRQ(n, priority), mcux_qtmr_isr, \
timers_##n, 0); \
irq_enable(DT_INST_IRQN(n)); \
return 0; \
} \
\
SYS_INIT(init_irq_##n, POST_KERNEL, CONFIG_COUNTER_INIT_PRIORITY);
DT_INST_FOREACH_STATUS_OKAY(QTMR_DEVICE_INIT_MCUX)
#undef DT_DRV_COMPAT
#define DT_DRV_COMPAT nxp_imx_tmr
static int mcux_qtmr_start(const struct device *dev)
{
const struct mcux_qtmr_config *config = dev->config;
QTMR_StartTimer(config->base, config->channel, config->mode);
return 0;
}
static int mcux_qtmr_stop(const struct device *dev)
{
const struct mcux_qtmr_config *config = dev->config;
QTMR_StopTimer(config->base, config->channel);
return 0;
}
static int mcux_qtmr_get_value(const struct device *dev, uint32_t *ticks)
{
const struct mcux_qtmr_config *config = dev->config;
*ticks = QTMR_GetCurrentTimerCount(config->base, config->channel);
return 0;
}
static int mcux_qtmr_set_alarm(const struct device *dev, uint8_t chan_id,
const struct counter_alarm_cfg *alarm_cfg)
{
const struct mcux_qtmr_config *config = dev->config;
struct mcux_qtmr_data *data = dev->data;
uint32_t current;
uint32_t ticks;
if (chan_id != 0) {
LOG_ERR("Invalid channel id");
return -EINVAL;
}
if (data->alarm_callback) {
return -EBUSY;
}
data->alarm_callback = alarm_cfg->callback;
data->alarm_user_data = alarm_cfg->user_data;
current = QTMR_GetCurrentTimerCount(config->base, config->channel);
ticks = alarm_cfg->ticks;
if ((alarm_cfg->flags & COUNTER_ALARM_CFG_ABSOLUTE) == 0) {
ticks += current;
}
/* this timer always counts up. */
config->base->CHANNEL[config->channel].COMP1 = ticks;
data->interrupt_mask |= kQTMR_Compare1InterruptEnable;
QTMR_EnableInterrupts(config->base, config->channel, data->interrupt_mask);
return 0;
}
static int mcux_qtmr_cancel_alarm(const struct device *dev, uint8_t chan_id)
{
const struct mcux_qtmr_config *config = dev->config;
struct mcux_qtmr_data *data = dev->data;
if (chan_id != 0) {
LOG_ERR("Invalid channel id");
return -EINVAL;
}
QTMR_DisableInterrupts(config->base, config->channel, data->interrupt_mask);
data->interrupt_mask &= ~kQTMR_Compare1InterruptEnable;
data->alarm_callback = NULL;
return 0;
}
static uint32_t mcux_qtmr_get_pending_int(const struct device *dev)
{
const struct mcux_qtmr_config *config = dev->config;
return QTMR_GetStatus(config->base, config->channel);
}
static int mcux_qtmr_set_top_value(const struct device *dev,
const struct counter_top_cfg *cfg)
{
const struct mcux_qtmr_config *config = dev->config;
struct mcux_qtmr_data *data = dev->data;
if (cfg->ticks != config->info.max_top_value) {
LOG_ERR("Wrap can only be set to 0x%x",
config->info.max_top_value);
return -ENOTSUP;
}
if ((cfg->flags & COUNTER_TOP_CFG_DONT_RESET) == 0) {
if ((config->base->CHANNEL[config->channel].CTRL & TMR_CTRL_DIR_MASK) != 0U) {
/* counting down, reset to UINT16MAX */
config->base->CHANNEL[config->channel].CNTR = UINT16_MAX;
} else {
/* counting up, reset to 0 */
config->base->CHANNEL[config->channel].CNTR = 0;
}
}
if (cfg->callback != NULL) {
data->top_callback = cfg->callback;
data->top_user_data = cfg->user_data;
data->interrupt_mask |= kQTMR_OverflowInterruptEnable;
QTMR_EnableInterrupts(config->base, config->channel, kQTMR_OverflowInterruptEnable);
}
return 0;
}
static uint32_t mcux_qtmr_get_top_value(const struct device *dev)
{
const struct mcux_qtmr_config *config = dev->config;
return config->info.max_top_value;
}
static uint32_t mcux_qtmr_get_freq(const struct device *dev)
{
struct mcux_qtmr_data *data = dev->data;
return data->freq;
}
/**
* @brief look up table for dividers when using internal clock sources kQTMR_ClockDivide_1 to
* kQTMR_ClockDivide_128
*/
static const uint8_t qtmr_primary_source_divider[] = {1, 2, 4, 8, 16, 32, 64, 128};
static int mcux_qtmr_init(const struct device *dev)
{
const struct mcux_qtmr_config *config = dev->config;
struct mcux_qtmr_data *data = dev->data;
if (config->qtmr_config.primarySource < kQTMR_ClockDivide_1) {
/* for external sources, use the value from the dts (if given) */
data->freq = config->info.freq;
} else {
/* bus clock with divider */
if (!device_is_ready(config->clock_dev)) {
LOG_ERR("clock control device not ready");
return -ENODEV;
}
if (clock_control_get_rate(config->clock_dev, config->clock_subsys,
&data->freq)) {
return -EINVAL;
}
data->freq /= qtmr_primary_source_divider[config->qtmr_config.primarySource -
kQTMR_ClockDivide_1];
}
QTMR_Init(config->base, config->channel, &config->qtmr_config);
return 0;
}
static const struct counter_driver_api mcux_qtmr_driver_api = {
.start = mcux_qtmr_start,
.stop = mcux_qtmr_stop,
.get_value = mcux_qtmr_get_value,
.set_alarm = mcux_qtmr_set_alarm,
.cancel_alarm = mcux_qtmr_cancel_alarm,
.set_top_value = mcux_qtmr_set_top_value,
.get_pending_int = mcux_qtmr_get_pending_int,
.get_top_value = mcux_qtmr_get_top_value,
.get_freq = mcux_qtmr_get_freq,
};
#define TMR_DEVICE_INIT_MCUX(n) \
static struct mcux_qtmr_data mcux_qtmr_data_ ## n; \
\
static const struct mcux_qtmr_config mcux_qtmr_config_ ## n = { \
.base = (void *)DT_REG_ADDR(DT_INST_PARENT(n)), \
.clock_dev = DEVICE_DT_GET(DT_CLOCKS_CTLR(DT_INST_PARENT(n))), \
.clock_subsys = \
(clock_control_subsys_t)DT_CLOCKS_CELL(DT_INST_PARENT(n), name), \
.info = { \
.max_top_value = UINT16_MAX, \
.freq = DT_INST_PROP_OR(n, freq, 0), \
.channels = 1, \
.flags = COUNTER_CONFIG_INFO_COUNT_UP, \
}, \
.channel = DT_INST_PROP(n, channel), \
.qtmr_config = { \
.debugMode = kQTMR_RunNormalInDebug, \
.enableExternalForce = false, \
.enableMasterMode = false, \
.faultFilterCount = DT_INST_PROP_OR(n, filter_count, 0), \
.faultFilterPeriod = DT_INST_PROP_OR(n, filter_count, 0), \
.primarySource = DT_INST_ENUM_IDX(n, primary_source), \
.secondarySource = DT_INST_ENUM_IDX_OR(n, secondary_source, 0), \
}, \
.mode = DT_INST_ENUM_IDX(n, mode), \
}; \
\
DEVICE_DT_INST_DEFINE(n, \
mcux_qtmr_init, \
NULL, \
&mcux_qtmr_data_ ## n, \
&mcux_qtmr_config_ ## n, \
POST_KERNEL, \
CONFIG_COUNTER_INIT_PRIORITY, \
&mcux_qtmr_driver_api); \
DT_INST_FOREACH_STATUS_OKAY(TMR_DEVICE_INIT_MCUX)