blob: 87003b86a9bc4b7b91d9f15bcc8dc110764793b6 [file] [log] [blame]
/*
* Copyright (c) 2022 Espressif Systems (Shanghai) Co., Ltd.
*
* SPDX-License-Identifier: Apache-2.0
*/
#define DT_DRV_COMPAT espressif_esp32_mcpwm
#include <hal/mcpwm_hal.h>
#include <hal/mcpwm_ll.h>
#include "driver/mcpwm.h"
#include <soc.h>
#include <errno.h>
#include <string.h>
#include <zephyr/drivers/pwm.h>
#include <zephyr/kernel.h>
#include <zephyr/drivers/pinctrl.h>
#include <zephyr/drivers/clock_control.h>
#ifdef CONFIG_PWM_CAPTURE
#include <zephyr/drivers/interrupt_controller/intc_esp32.h>
#endif /* CONFIG_PWM_CAPTURE */
#include <zephyr/logging/log.h>
LOG_MODULE_REGISTER(mcpwm_esp32, CONFIG_PWM_LOG_LEVEL);
#ifdef CONFIG_PWM_CAPTURE
#define SKIP_IRQ_NUM 4U
#define MCPWM_INTR_CAP0 BIT(0)
#define MCPWM_INTR_CAP1 BIT(1)
#define MCPWM_INTR_CAP2 BIT(2)
#define MCPWM_CHANNEL_NUM 8U
#define CAPTURE_CHANNEL_IDX 6U
#else
#define MCPWM_CHANNEL_NUM 6U
#endif /* CONFIG_PWM_CAPTURE */
struct mcpwm_esp32_data {
mcpwm_hal_context_t hal;
mcpwm_hal_init_config_t init_config;
struct k_sem cmd_sem;
};
#ifdef CONFIG_PWM_CAPTURE
struct capture_data {
uint32_t value;
mcpwm_capture_on_edge_t edge;
};
struct mcpwm_esp32_capture_config {
uint8_t capture_signal;
pwm_capture_callback_handler_t callback;
void *user_data;
uint32_t period;
uint32_t pulse;
uint32_t overflows;
uint8_t skip_irq;
bool capture_period;
bool capture_pulse;
bool continuous;
struct capture_data capture_data[SKIP_IRQ_NUM];
};
#endif /* CONFIG_PWM_CAPTURE */
struct mcpwm_esp32_channel_config {
uint8_t idx;
uint8_t timer_id;
uint8_t operator_id;
uint8_t generator_id;
uint32_t freq;
uint32_t duty;
uint8_t prescale;
bool inverted;
#ifdef CONFIG_PWM_CAPTURE
struct mcpwm_esp32_capture_config capture;
#endif /* CONFIG_PWM_CAPTURE */
};
struct mcpwm_esp32_config {
const uint8_t index;
const struct pinctrl_dev_config *pincfg;
const struct device *clock_dev;
const clock_control_subsys_t clock_subsys;
uint8_t prescale;
uint8_t prescale_timer0;
uint8_t prescale_timer1;
uint8_t prescale_timer2;
struct mcpwm_esp32_channel_config channel_config[MCPWM_CHANNEL_NUM];
#ifdef CONFIG_PWM_CAPTURE
void (*irq_config_func)(const struct device *dev);
#endif /* CONFIG_PWM_CAPTURE */
};
static void mcpwm_esp32_duty_set(const struct device *dev,
struct mcpwm_esp32_channel_config *channel)
{
struct mcpwm_esp32_data *data = (struct mcpwm_esp32_data *const)(dev)->data;
mcpwm_duty_type_t duty_type;
uint32_t set_duty;
if (channel->inverted) {
duty_type = channel->duty == 0 ?
MCPWM_HAL_GENERATOR_MODE_FORCE_HIGH : channel->duty == 100 ?
MCPWM_HAL_GENERATOR_MODE_FORCE_LOW : MCPWM_DUTY_MODE_1;
} else {
duty_type = channel->duty == 0 ?
MCPWM_HAL_GENERATOR_MODE_FORCE_LOW : channel->duty == 100 ?
MCPWM_HAL_GENERATOR_MODE_FORCE_HIGH : MCPWM_DUTY_MODE_0;
}
set_duty = mcpwm_ll_timer_get_peak(data->hal.dev, channel->timer_id, false) *
channel->duty / 100;
mcpwm_ll_operator_select_timer(data->hal.dev, channel->operator_id, channel->timer_id);
mcpwm_ll_operator_set_compare_value(data->hal.dev, channel->operator_id,
channel->generator_id, set_duty);
mcpwm_ll_operator_enable_update_compare_on_tez(data->hal.dev, channel->operator_id,
channel->generator_id, true);
if (duty_type == MCPWM_DUTY_MODE_0) {
mcpwm_ll_generator_set_action_on_timer_event(
data->hal.dev, channel->operator_id, channel->generator_id,
MCPWM_TIMER_DIRECTION_UP, MCPWM_TIMER_EVENT_ZERO, MCPWM_GEN_ACTION_HIGH);
mcpwm_ll_generator_set_action_on_timer_event(
data->hal.dev, channel->operator_id, channel->generator_id,
MCPWM_TIMER_DIRECTION_UP, MCPWM_TIMER_EVENT_PEAK, MCPWM_GEN_ACTION_KEEP);
mcpwm_ll_generator_set_action_on_compare_event(
data->hal.dev, channel->operator_id, channel->generator_id,
MCPWM_TIMER_DIRECTION_UP, channel->generator_id, MCPWM_ACTION_FORCE_LOW);
} else if (duty_type == MCPWM_DUTY_MODE_1) {
mcpwm_ll_generator_set_action_on_timer_event(
data->hal.dev, channel->operator_id, channel->generator_id,
MCPWM_TIMER_DIRECTION_UP, MCPWM_TIMER_EVENT_ZERO, MCPWM_GEN_ACTION_LOW);
mcpwm_ll_generator_set_action_on_timer_event(
data->hal.dev, channel->operator_id, channel->generator_id,
MCPWM_TIMER_DIRECTION_UP, MCPWM_TIMER_EVENT_PEAK, MCPWM_ACTION_NO_CHANGE);
mcpwm_ll_generator_set_action_on_compare_event(
data->hal.dev, channel->operator_id, channel->generator_id,
MCPWM_TIMER_DIRECTION_UP, channel->generator_id, MCPWM_ACTION_FORCE_HIGH);
} else if (duty_type == MCPWM_HAL_GENERATOR_MODE_FORCE_LOW) {
mcpwm_ll_generator_set_action_on_timer_event(
data->hal.dev, channel->operator_id, channel->generator_id,
MCPWM_TIMER_DIRECTION_UP, MCPWM_TIMER_EVENT_ZERO, MCPWM_ACTION_FORCE_LOW);
mcpwm_ll_generator_set_action_on_timer_event(
data->hal.dev, channel->operator_id, channel->generator_id,
MCPWM_TIMER_DIRECTION_UP, MCPWM_TIMER_EVENT_PEAK, MCPWM_ACTION_FORCE_LOW);
mcpwm_ll_generator_set_action_on_compare_event(
data->hal.dev, channel->operator_id, channel->generator_id,
MCPWM_TIMER_DIRECTION_UP, channel->generator_id, MCPWM_ACTION_FORCE_LOW);
} else if (duty_type == MCPWM_HAL_GENERATOR_MODE_FORCE_HIGH) {
mcpwm_ll_generator_set_action_on_timer_event(
data->hal.dev, channel->operator_id, channel->generator_id,
MCPWM_TIMER_DIRECTION_UP, MCPWM_TIMER_EVENT_ZERO, MCPWM_ACTION_FORCE_HIGH);
mcpwm_ll_generator_set_action_on_timer_event(
data->hal.dev, channel->operator_id, channel->generator_id,
MCPWM_TIMER_DIRECTION_UP, MCPWM_TIMER_EVENT_PEAK, MCPWM_ACTION_FORCE_HIGH);
mcpwm_ll_generator_set_action_on_compare_event(
data->hal.dev, channel->operator_id, channel->generator_id,
MCPWM_TIMER_DIRECTION_UP, channel->generator_id, MCPWM_ACTION_FORCE_HIGH);
}
}
static int mcpwm_esp32_configure_pinctrl(const struct device *dev)
{
int ret;
struct mcpwm_esp32_config *config = (struct mcpwm_esp32_config *)dev->config;
ret = pinctrl_apply_state(config->pincfg, PINCTRL_STATE_DEFAULT);
if (ret < 0) {
LOG_ERR("PWM pinctrl setup failed (%d)", ret);
return ret;
}
return 0;
}
static int mcpwm_esp32_timer_set(const struct device *dev,
struct mcpwm_esp32_channel_config *channel)
{
struct mcpwm_esp32_data *data = (struct mcpwm_esp32_data *const)(dev)->data;
__ASSERT_NO_MSG(channel->freq > 0);
mcpwm_ll_timer_set_clock_prescale(data->hal.dev, channel->timer_id, channel->prescale);
mcpwm_ll_timer_set_count_mode(data->hal.dev, channel->timer_id, MCPWM_TIMER_COUNT_MODE_UP);
mcpwm_ll_timer_update_period_at_once(data->hal.dev, channel->timer_id);
int real_group_prescale = mcpwm_ll_group_get_clock_prescale(data->hal.dev);
uint32_t real_timer_clk_hz =
SOC_MCPWM_BASE_CLK_HZ / real_group_prescale /
mcpwm_ll_timer_get_clock_prescale(data->hal.dev, channel->timer_id);
mcpwm_ll_timer_set_peak(data->hal.dev, channel->timer_id, real_timer_clk_hz / channel->freq,
false);
return 0;
}
static int mcpwm_esp32_get_cycles_per_sec(const struct device *dev, uint32_t channel_idx,
uint64_t *cycles)
{
struct mcpwm_esp32_config *config = (struct mcpwm_esp32_config *)dev->config;
struct mcpwm_esp32_channel_config *channel = &config->channel_config[channel_idx];
if (!channel) {
LOG_ERR("Error getting channel %d", channel_idx);
return -EINVAL;
}
#ifdef CONFIG_PWM_CAPTURE
if (channel->idx >= CAPTURE_CHANNEL_IDX) {
*cycles = (uint64_t)APB_CLK_FREQ;
return 0;
}
#endif /* CONFIG_PWM_CAPTURE */
*cycles =
(uint64_t)SOC_MCPWM_BASE_CLK_HZ / (config->prescale + 1) / (channel->prescale + 1);
return 0;
}
static int mcpwm_esp32_set_cycles(const struct device *dev, uint32_t channel_idx,
uint32_t period_cycles, uint32_t pulse_cycles, pwm_flags_t flags)
{
int ret = 0;
uint64_t clk_freq;
struct mcpwm_esp32_config *config = (struct mcpwm_esp32_config *)dev->config;
struct mcpwm_esp32_data *data = (struct mcpwm_esp32_data *const)(dev)->data;
struct mcpwm_esp32_channel_config *channel = &config->channel_config[channel_idx];
if (!channel) {
LOG_ERR("Error getting channel %d", channel_idx);
return -EINVAL;
}
/* Update PWM frequency according to period_cycles */
mcpwm_esp32_get_cycles_per_sec(dev, channel_idx, &clk_freq);
channel->freq = (uint32_t)(clk_freq / period_cycles);
if (!channel->freq) {
return -EINVAL;
}
k_sem_take(&data->cmd_sem, K_FOREVER);
ret = mcpwm_esp32_timer_set(dev, channel);
if (ret < 0) {
k_sem_give(&data->cmd_sem);
return ret;
}
double duty_cycle = (double)pulse_cycles * 100 / (double)period_cycles;
channel->duty = (uint32_t)duty_cycle;
channel->inverted = (flags & PWM_POLARITY_INVERTED);
mcpwm_esp32_duty_set(dev, channel);
ret = mcpwm_esp32_configure_pinctrl(dev);
if (ret < 0) {
k_sem_give(&data->cmd_sem);
return ret;
}
mcpwm_ll_timer_set_execute_command(data->hal.dev, channel->timer_id,
MCPWM_TIMER_START_NO_STOP);
k_sem_give(&data->cmd_sem);
return ret;
}
#ifdef CONFIG_PWM_CAPTURE
static int mcpwm_esp32_configure_capture(const struct device *dev, uint32_t channel_idx,
pwm_flags_t flags, pwm_capture_callback_handler_t cb,
void *user_data)
{
struct mcpwm_esp32_config *config = (struct mcpwm_esp32_config *)dev->config;
struct mcpwm_esp32_data *data = (struct mcpwm_esp32_data *const)(dev)->data;
struct mcpwm_esp32_channel_config *channel = &config->channel_config[channel_idx];
struct mcpwm_esp32_capture_config *capture = &channel->capture;
if (!channel) {
LOG_ERR("Error getting channel %d", channel_idx);
return -EINVAL;
}
if ((channel->idx < CAPTURE_CHANNEL_IDX) || (channel->idx > CAPTURE_CHANNEL_IDX + 2)) {
LOG_ERR("PWM capture only supported on channels 6, 7 and 8");
return -EINVAL;
}
if (data->hal.dev->cap_chn_cfg[capture->capture_signal].capn_en) {
LOG_ERR("PWM Capture already in progress");
return -EBUSY;
}
if (!(flags & PWM_CAPTURE_TYPE_MASK)) {
LOG_ERR("No PWM capture type specified");
return -EINVAL;
}
channel->inverted = (flags & PWM_POLARITY_INVERTED);
capture->capture_signal = channel->idx - CAPTURE_CHANNEL_IDX;
capture->callback = cb;
capture->user_data = user_data;
capture->capture_period = (flags & PWM_CAPTURE_TYPE_PERIOD);
capture->capture_pulse = (flags & PWM_CAPTURE_TYPE_PULSE);
capture->continuous = (flags & PWM_CAPTURE_MODE_CONTINUOUS);
return 0;
}
static int mcpwm_esp32_disable_capture(const struct device *dev, uint32_t channel_idx)
{
struct mcpwm_esp32_config *config = (struct mcpwm_esp32_config *)dev->config;
struct mcpwm_esp32_data *data = (struct mcpwm_esp32_data *const)(dev)->data;
struct mcpwm_esp32_channel_config *channel = &config->channel_config[channel_idx];
struct mcpwm_esp32_capture_config *capture = &channel->capture;
if (!channel) {
LOG_ERR("Error getting channel %d", channel_idx);
return -EINVAL;
}
if ((channel->idx < CAPTURE_CHANNEL_IDX) || (channel->idx > CAPTURE_CHANNEL_IDX + 2)) {
LOG_ERR("PWM capture only supported on channels 6, 7 and 8");
return -EINVAL;
}
mcpwm_ll_capture_enable_channel(data->hal.dev, capture->capture_signal, false);
mcpwm_ll_intr_enable_capture(data->hal.dev, capture->capture_signal, false);
return 0;
}
static int mcpwm_esp32_enable_capture(const struct device *dev, uint32_t channel_idx)
{
struct mcpwm_esp32_config *config = (struct mcpwm_esp32_config *)dev->config;
struct mcpwm_esp32_data *data = (struct mcpwm_esp32_data *const)(dev)->data;
struct mcpwm_esp32_channel_config *channel = &config->channel_config[channel_idx];
struct mcpwm_esp32_capture_config *capture = &channel->capture;
if (!channel) {
LOG_ERR("Error getting channel %d", channel_idx);
return -EINVAL;
}
if (!capture->callback) {
LOG_ERR("Capture not configured");
return -EINVAL;
}
if ((channel->idx < CAPTURE_CHANNEL_IDX) || (channel->idx > CAPTURE_CHANNEL_IDX + 2)) {
LOG_ERR("PWM capture only supported on channels 6, 7 and 8");
return -EINVAL;
}
if (data->hal.dev->cap_chn_cfg[capture->capture_signal].capn_en) {
LOG_ERR("PWM Capture already in progress");
return -EBUSY;
}
/**
* Capture prescale is different from other modules as it is applied to the input
* signal, not the timer source. It is disabled by default.
*/
mcpwm_capture_config_t cap_conf = {
.cap_edge = MCPWM_BOTH_EDGE,
.cap_prescale = 1,
};
mcpwm_hal_init(&data->hal, &data->init_config);
mcpwm_ll_group_set_clock_prescale(data->hal.dev, config->prescale);
mcpwm_ll_group_enable_shadow_mode(data->hal.dev);
mcpwm_ll_group_flush_shadow(data->hal.dev);
mcpwm_ll_capture_enable_timer(data->hal.dev, true);
mcpwm_ll_capture_enable_channel(data->hal.dev, capture->capture_signal, true);
mcpwm_ll_capture_enable_negedge(data->hal.dev, capture->capture_signal,
cap_conf.cap_edge & MCPWM_NEG_EDGE);
mcpwm_ll_capture_enable_posedge(data->hal.dev, capture->capture_signal,
cap_conf.cap_edge & MCPWM_POS_EDGE);
mcpwm_ll_capture_set_prescale(data->hal.dev, capture->capture_signal,
cap_conf.cap_prescale);
mcpwm_ll_intr_enable_capture(data->hal.dev, capture->capture_signal, true);
mcpwm_ll_intr_clear_capture_status(data->hal.dev, 1 << capture->capture_signal);
capture->skip_irq = 0;
return 0;
}
#endif /* CONFIG_PWM_CAPTURE */
static void channel_init(const struct device *dev)
{
struct mcpwm_esp32_config *config = (struct mcpwm_esp32_config *)dev->config;
struct mcpwm_esp32_channel_config *channel;
for (uint8_t i = 0; i < MCPWM_CHANNEL_NUM; i++) {
channel = &config->channel_config[i];
channel->idx = i;
channel->timer_id = i < 2 ? 0 : i < 4 ? 1 : 2;
channel->operator_id = i < 2 ? 0 : i < 4 ? 1 : 2;
channel->generator_id = i % 2 ? 1 : 0;
channel->prescale = i < 2 ? config->prescale_timer0
: i < 4 ? config->prescale_timer1
: config->prescale_timer2;
}
}
int mcpwm_esp32_init(const struct device *dev)
{
int ret;
struct mcpwm_esp32_config *config = (struct mcpwm_esp32_config *)dev->config;
struct mcpwm_esp32_data *data = (struct mcpwm_esp32_data *const)(dev)->data;
struct mcpwm_esp32_channel_config *channel;
if (!device_is_ready(config->clock_dev)) {
LOG_ERR("clock control device not ready");
return -ENODEV;
}
/* Enable peripheral */
ret = clock_control_on(config->clock_dev, config->clock_subsys);
if (ret < 0) {
LOG_ERR("Could not initialize clock (%d)", ret);
return ret;
}
channel_init(dev);
mcpwm_hal_init(&data->hal, &data->init_config);
mcpwm_ll_group_set_clock_prescale(data->hal.dev, config->prescale);
mcpwm_ll_group_enable_shadow_mode(data->hal.dev);
mcpwm_ll_group_flush_shadow(data->hal.dev);
#ifdef CONFIG_PWM_CAPTURE
config->irq_config_func(dev);
#endif /* CONFIG_PWM_CAPTURE */
return 0;
}
#ifdef CONFIG_PWM_CAPTURE
static void IRAM_ATTR mcpwm_esp32_isr(const struct device *dev)
{
struct mcpwm_esp32_config *config = (struct mcpwm_esp32_config *)dev->config;
struct mcpwm_esp32_data *data = (struct mcpwm_esp32_data *const)(dev)->data;
struct mcpwm_esp32_channel_config *channel;
struct mcpwm_esp32_capture_config *capture;
uint32_t mcpwm_intr_status;
struct capture_data cap_data;
mcpwm_intr_status = mcpwm_ll_intr_get_capture_status(data->hal.dev);
mcpwm_ll_intr_clear_capture_status(data->hal.dev, mcpwm_intr_status);
if (mcpwm_intr_status & MCPWM_INTR_CAP0) {
channel = &config->channel_config[CAPTURE_CHANNEL_IDX];
} else if (mcpwm_intr_status & MCPWM_INTR_CAP1) {
channel = &config->channel_config[CAPTURE_CHANNEL_IDX + 1];
} else if (mcpwm_intr_status & MCPWM_INTR_CAP2) {
channel = &config->channel_config[CAPTURE_CHANNEL_IDX + 2];
} else {
return;
}
if (!channel) {
return;
}
capture = &channel->capture;
/* We need to wait at least 4 (2 positive edges and 2 negative edges) interrupts to
* calculate the period
*/
if (capture->skip_irq < SKIP_IRQ_NUM) {
capture->capture_data[capture->skip_irq].value =
mcpwm_ll_capture_get_value(data->hal.dev, capture->capture_signal);
capture->capture_data[capture->skip_irq].edge =
mcpwm_ll_capture_is_negedge(data->hal.dev, capture->capture_signal)
? MCPWM_NEG_EDGE
: MCPWM_POS_EDGE;
capture->skip_irq++;
} else {
/**
* The capture timer is a 32-bit counter incrementing continuously, once enabled.
* On the input it has an APB clock running typically at 80 MHz
*/
capture->period = channel->inverted ?
capture->capture_data[0].edge == MCPWM_NEG_EDGE
? (capture->capture_data[2].value - capture->capture_data[0].value)
: (capture->capture_data[3].value - capture->capture_data[1].value)
: capture->capture_data[0].edge == MCPWM_POS_EDGE
? (capture->capture_data[2].value - capture->capture_data[0].value)
: (capture->capture_data[3].value - capture->capture_data[1].value);
capture->pulse = channel->inverted ?
capture->capture_data[0].edge == MCPWM_NEG_EDGE
? (capture->capture_data[1].value - capture->capture_data[0].value)
: (capture->capture_data[2].value - capture->capture_data[1].value)
: capture->capture_data[0].edge == MCPWM_POS_EDGE
? (capture->capture_data[1].value - capture->capture_data[0].value)
: (capture->capture_data[2].value - capture->capture_data[1].value);
capture->skip_irq = 0;
if (!capture->continuous) {
mcpwm_esp32_disable_capture(dev, channel->idx);
}
if (capture->callback) {
capture->callback(dev, capture->capture_signal + CAPTURE_CHANNEL_IDX,
capture->capture_period ? capture->period : 0u,
capture->capture_pulse ? capture->pulse : 0u, 0u,
capture->user_data);
}
}
}
#endif /* CONFIG_PWM_CAPTURE */
static const struct pwm_driver_api mcpwm_esp32_api = {
.set_cycles = mcpwm_esp32_set_cycles,
.get_cycles_per_sec = mcpwm_esp32_get_cycles_per_sec,
#ifdef CONFIG_PWM_CAPTURE
.configure_capture = mcpwm_esp32_configure_capture,
.enable_capture = mcpwm_esp32_enable_capture,
.disable_capture = mcpwm_esp32_disable_capture,
#endif /* CONFIG_PWM_CAPTURE */
};
#ifdef CONFIG_PWM_CAPTURE
#define IRQ_CONFIG_FUNC(idx) \
static void mcpwm_esp32_irq_config_func_##idx(const struct device *dev) \
{ \
esp_intr_alloc(DT_INST_IRQN(idx), 0, (intr_handler_t)mcpwm_esp32_isr, (void *)dev, \
NULL); \
}
#define CAPTURE_INIT(idx) .irq_config_func = mcpwm_esp32_irq_config_func_##idx
#else
#define IRQ_CONFIG_FUNC(idx)
#define CAPTURE_INIT(idx)
#endif /* CONFIG_PWM_CAPTURE */
#define ESP32_MCPWM_INIT(idx) \
PINCTRL_DT_INST_DEFINE(idx); \
IRQ_CONFIG_FUNC(idx); \
static struct mcpwm_esp32_data mcpwm_esp32_data_##idx = { \
.hal = \
{ \
.dev = (mcpwm_dev_t *)DT_INST_REG_ADDR(idx), \
}, \
.init_config = \
{ \
.host_id = idx, \
}, \
.cmd_sem = Z_SEM_INITIALIZER(mcpwm_esp32_data_##idx.cmd_sem, 1, 1), \
}; \
\
static struct mcpwm_esp32_config mcpwm_esp32_config_##idx = { \
.index = idx, \
.pincfg = PINCTRL_DT_INST_DEV_CONFIG_GET(idx), \
.clock_dev = DEVICE_DT_GET(DT_INST_CLOCKS_CTLR(idx)), \
.clock_subsys = (clock_control_subsys_t)DT_INST_CLOCKS_CELL(idx, offset), \
.prescale = DT_INST_PROP(idx, prescale), \
.prescale_timer0 = DT_INST_PROP_OR(idx, prescale_timer0, 0), \
.prescale_timer1 = DT_INST_PROP_OR(idx, prescale_timer1, 0), \
.prescale_timer2 = DT_INST_PROP_OR(idx, prescale_timer2, 0), \
CAPTURE_INIT(idx)}; \
\
DEVICE_DT_INST_DEFINE(idx, &mcpwm_esp32_init, NULL, &mcpwm_esp32_data_##idx, \
&mcpwm_esp32_config_##idx, POST_KERNEL, \
CONFIG_PWM_INIT_PRIORITY, &mcpwm_esp32_api);
DT_INST_FOREACH_STATUS_OKAY(ESP32_MCPWM_INIT)