blob: 19b4a952d940db7930386fe69ee36f8bc0e77237 [file] [log] [blame]
/*
* Copyright (c) 2016-2017, Texas Instruments Incorporated
*
* SPDX-License-Identifier: Apache-2.0
*/
#define DT_DRV_COMPAT ti_cc32xx_uart
#include <zephyr/kernel.h>
#include <zephyr/arch/cpu.h>
#include <zephyr/drivers/uart.h>
/* Driverlib includes */
#include <inc/hw_types.h>
#include <driverlib/rom.h>
#include <driverlib/rom_map.h>
#include <driverlib/prcm.h>
#include <driverlib/uart.h>
#include <zephyr/irq.h>
struct uart_cc32xx_dev_config {
unsigned long base;
uint32_t sys_clk_freq;
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
uart_irq_config_func_t irq_config_func;
#endif
};
struct uart_cc32xx_dev_data_t {
uint32_t prcm;
uint32_t baud_rate;
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
uart_irq_callback_user_data_t cb; /**< Callback function pointer */
void *cb_data; /**< Callback function arg */
#endif /* CONFIG_UART_INTERRUPT_DRIVEN */
};
#define PRIME_CHAR '\r'
/* Forward decls: */
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
static void uart_cc32xx_isr(const struct device *dev);
#endif
/*
* CC32XX UART has a configurable FIFO length, from 1 to 8 characters.
* However, the Zephyr console driver, and the Zephyr uart sample test, assume
* a RX FIFO depth of one: meaning, one interrupt == one character received.
* Keeping with this assumption, this driver leaves the FIFOs disabled,
* and at depth 1.
*/
static int uart_cc32xx_init(const struct device *dev)
{
const struct uart_cc32xx_dev_config *config = dev->config;
const struct uart_cc32xx_dev_data_t *data = dev->data;
MAP_PRCMPeripheralClkEnable(data->prcm,
PRCM_RUN_MODE_CLK | PRCM_SLP_MODE_CLK);
MAP_PRCMPeripheralReset(data->prcm);
/* This also calls MAP_UARTEnable() to enable the FIFOs: */
MAP_UARTConfigSetExpClk(config->base,
MAP_PRCMPeripheralClockGet(data->prcm),
data->baud_rate,
(UART_CONFIG_WLEN_8 | UART_CONFIG_STOP_ONE
| UART_CONFIG_PAR_NONE));
MAP_UARTFlowControlSet(config->base, UART_FLOWCONTROL_NONE);
/* Re-disable the FIFOs: */
MAP_UARTFIFODisable(config->base);
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
/* Clear any pending UART RX interrupts: */
MAP_UARTIntClear(config->base, UART_INT_RX);
config->irq_config_func(dev);
/* Fill the tx fifo, so Zephyr console & shell subsystems get "primed"
* with first tx fifo empty interrupt when they first call
* uart_irq_tx_enable().
*/
MAP_UARTCharPutNonBlocking(config->base, PRIME_CHAR);
#endif
return 0;
}
static int uart_cc32xx_poll_in(const struct device *dev, unsigned char *c)
{
const struct uart_cc32xx_dev_config *config = dev->config;
if (MAP_UARTCharsAvail(config->base)) {
*c = MAP_UARTCharGetNonBlocking(config->base);
} else {
return (-1);
}
return 0;
}
static void uart_cc32xx_poll_out(const struct device *dev, unsigned char c)
{
const struct uart_cc32xx_dev_config *config = dev->config;
MAP_UARTCharPut(config->base, c);
}
static int uart_cc32xx_err_check(const struct device *dev)
{
const struct uart_cc32xx_dev_config *config = dev->config;
unsigned long cc32xx_errs = 0L;
unsigned int z_err = 0U;
cc32xx_errs = MAP_UARTRxErrorGet(config->base);
/* Map cc32xx SDK uart.h defines to zephyr uart.h defines */
z_err = ((cc32xx_errs & UART_RXERROR_OVERRUN) ?
UART_ERROR_OVERRUN : 0) |
((cc32xx_errs & UART_RXERROR_BREAK) ? UART_BREAK : 0) |
((cc32xx_errs & UART_RXERROR_PARITY) ? UART_ERROR_PARITY : 0) |
((cc32xx_errs & UART_RXERROR_FRAMING) ? UART_ERROR_FRAMING : 0);
MAP_UARTRxErrorClear(config->base);
return (int)z_err;
}
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
static int uart_cc32xx_fifo_fill(const struct device *dev,
const uint8_t *tx_data,
int size)
{
const struct uart_cc32xx_dev_config *config = dev->config;
unsigned int num_tx = 0U;
while ((size - num_tx) > 0) {
/* Send a character */
if (MAP_UARTCharPutNonBlocking(config->base, tx_data[num_tx])) {
num_tx++;
} else {
break;
}
}
return (int)num_tx;
}
static int uart_cc32xx_fifo_read(const struct device *dev, uint8_t *rx_data,
const int size)
{
const struct uart_cc32xx_dev_config *config = dev->config;
unsigned int num_rx = 0U;
while (((size - num_rx) > 0) &&
MAP_UARTCharsAvail(config->base)) {
/* Receive a character */
rx_data[num_rx++] =
MAP_UARTCharGetNonBlocking(config->base);
}
return num_rx;
}
static void uart_cc32xx_irq_tx_enable(const struct device *dev)
{
const struct uart_cc32xx_dev_config *config = dev->config;
MAP_UARTIntEnable(config->base, UART_INT_TX);
}
static void uart_cc32xx_irq_tx_disable(const struct device *dev)
{
const struct uart_cc32xx_dev_config *config = dev->config;
MAP_UARTIntDisable(config->base, UART_INT_TX);
}
static int uart_cc32xx_irq_tx_ready(const struct device *dev)
{
const struct uart_cc32xx_dev_config *config = dev->config;
unsigned int int_status;
int_status = MAP_UARTIntStatus(config->base, 1);
return (int_status & UART_INT_TX);
}
static void uart_cc32xx_irq_rx_enable(const struct device *dev)
{
const struct uart_cc32xx_dev_config *config = dev->config;
/* FIFOs are left disabled from reset, so UART_INT_RT flag not used. */
MAP_UARTIntEnable(config->base, UART_INT_RX);
}
static void uart_cc32xx_irq_rx_disable(const struct device *dev)
{
const struct uart_cc32xx_dev_config *config = dev->config;
MAP_UARTIntDisable(config->base, UART_INT_RX);
}
static int uart_cc32xx_irq_tx_complete(const struct device *dev)
{
const struct uart_cc32xx_dev_config *config = dev->config;
return (!MAP_UARTBusy(config->base));
}
static int uart_cc32xx_irq_rx_ready(const struct device *dev)
{
const struct uart_cc32xx_dev_config *config = dev->config;
unsigned int int_status;
int_status = MAP_UARTIntStatus(config->base, 1);
return (int_status & UART_INT_RX);
}
static void uart_cc32xx_irq_err_enable(const struct device *dev)
{
/* Not yet used in zephyr */
}
static void uart_cc32xx_irq_err_disable(const struct device *dev)
{
/* Not yet used in zephyr */
}
static int uart_cc32xx_irq_is_pending(const struct device *dev)
{
const struct uart_cc32xx_dev_config *config = dev->config;
unsigned int int_status;
int_status = MAP_UARTIntStatus(config->base, 1);
return (int_status & (UART_INT_TX | UART_INT_RX));
}
static int uart_cc32xx_irq_update(const struct device *dev)
{
return 1;
}
static void uart_cc32xx_irq_callback_set(const struct device *dev,
uart_irq_callback_user_data_t cb,
void *cb_data)
{
struct uart_cc32xx_dev_data_t * const dev_data = dev->data;
dev_data->cb = cb;
dev_data->cb_data = cb_data;
}
/**
* @brief Interrupt service routine.
*
* This simply calls the callback function, if one exists.
*
* Note: CC32XX UART Tx interrupts when ready to send; Rx interrupts when char
* received.
*
* @param arg Argument to ISR.
*/
static void uart_cc32xx_isr(const struct device *dev)
{
const struct uart_cc32xx_dev_config *config = dev->config;
struct uart_cc32xx_dev_data_t * const dev_data = dev->data;
unsigned long intStatus = MAP_UARTIntStatus(config->base, 1);
if (dev_data->cb) {
dev_data->cb(dev, dev_data->cb_data);
}
/*
* RX/TX interrupt should have been implicitly cleared by Zephyr UART
* clients calling uart_fifo_read() or uart_fifo_write().
* Still, clear any error interrupts here, as they're not yet handled.
*/
MAP_UARTIntClear(config->base,
intStatus & ~(UART_INT_RX | UART_INT_TX));
}
#endif /* CONFIG_UART_INTERRUPT_DRIVEN */
static const struct uart_driver_api uart_cc32xx_driver_api = {
.poll_in = uart_cc32xx_poll_in,
.poll_out = uart_cc32xx_poll_out,
.err_check = uart_cc32xx_err_check,
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
.fifo_fill = uart_cc32xx_fifo_fill,
.fifo_read = uart_cc32xx_fifo_read,
.irq_tx_enable = uart_cc32xx_irq_tx_enable,
.irq_tx_disable = uart_cc32xx_irq_tx_disable,
.irq_tx_ready = uart_cc32xx_irq_tx_ready,
.irq_rx_enable = uart_cc32xx_irq_rx_enable,
.irq_rx_disable = uart_cc32xx_irq_rx_disable,
.irq_tx_complete = uart_cc32xx_irq_tx_complete,
.irq_rx_ready = uart_cc32xx_irq_rx_ready,
.irq_err_enable = uart_cc32xx_irq_err_enable,
.irq_err_disable = uart_cc32xx_irq_err_disable,
.irq_is_pending = uart_cc32xx_irq_is_pending,
.irq_update = uart_cc32xx_irq_update,
.irq_callback_set = uart_cc32xx_irq_callback_set,
#endif /* CONFIG_UART_INTERRUPT_DRIVEN */
};
#define UART_32XX_DEVICE(idx) \
IF_ENABLED(CONFIG_UART_INTERRUPT_DRIVEN, \
(static void uart_cc32xx_cfg_func_##idx(const struct device *dev) \
{ \
IF_ENABLED(CONFIG_UART_INTERRUPT_DRIVEN, ( \
IRQ_CONNECT(DT_INST_IRQN(idx), \
DT_INST_IRQ(idx, priority), \
uart_cc32xx_isr, DEVICE_DT_INST_GET(idx), \
0); \
irq_enable(DT_INST_IRQN(idx))) \
); \
})); \
static const struct uart_cc32xx_dev_config uart_cc32xx_dev_cfg_##idx = { \
.base = DT_INST_REG_ADDR(idx), \
.sys_clk_freq = DT_INST_PROP_BY_PHANDLE(idx, clocks, clock_frequency),\
IF_ENABLED(CONFIG_UART_INTERRUPT_DRIVEN, \
(.irq_config_func = uart_cc32xx_cfg_func_##idx,)) \
}; \
static struct uart_cc32xx_dev_data_t uart_cc32xx_dev_data_##idx = { \
.prcm = PRCM_UARTA##idx, \
.baud_rate = DT_INST_PROP(idx, current_speed), \
IF_ENABLED(CONFIG_UART_INTERRUPT_DRIVEN, (.cb = NULL,)) \
}; \
DEVICE_DT_INST_DEFINE(idx, uart_cc32xx_init, \
NULL, &uart_cc32xx_dev_data_##idx, \
&uart_cc32xx_dev_cfg_##idx, \
PRE_KERNEL_1, CONFIG_SERIAL_INIT_PRIORITY, \
(void *)&uart_cc32xx_driver_api); \
DT_INST_FOREACH_STATUS_OKAY(UART_32XX_DEVICE);