| # Kconfig - x86 general configuration options |
| |
| # |
| # Copyright (c) 2014-2015 Wind River Systems, Inc. |
| # |
| # SPDX-License-Identifier: Apache-2.0 |
| # |
| menu "X86 Architecture Options" |
| depends on X86 |
| |
| config ARCH |
| default "x86" |
| |
| config ARCH_DEFCONFIG |
| string |
| default "arch/x86/defconfig" |
| |
| source "arch/x86/core/Kconfig" |
| |
| # |
| # Hidden CPU family configs which are to be selected by |
| # individual SoC. |
| # |
| config CPU_ATOM |
| # Hidden |
| bool |
| select CMOV |
| select CPU_HAS_FPU |
| select ARCH_HAS_STACK_PROTECTION if X86_MMU |
| select ARCH_HAS_USERSPACE if X86_MMU |
| help |
| This option signifies the use of a CPU from the Atom family. |
| |
| config CPU_MINUTEIA |
| # Hidden |
| select ARCH_HAS_STACK_PROTECTION if X86_MMU |
| select ARCH_HAS_USERSPACE if X86_MMU |
| bool |
| help |
| This option signifies the use of a CPU from the Minute IA family. |
| |
| config CPU_APOLLO_LAKE |
| # Hidden |
| bool |
| select CMOV |
| select CPU_HAS_FPU |
| select ARCH_HAS_STACK_PROTECTION if X86_MMU |
| select ARCH_HAS_USERSPACE if X86_MMU |
| help |
| This option signifies the use of a CPU from the Apollo Lake family. |
| |
| menu "Processor Capabilities" |
| |
| config X86_IAMCU |
| bool "IAMCU calling convention" |
| help |
| The IAMCU calling convention changes the X86 C calling convention to |
| pass some arguments via registers allowing for code size and performance |
| improvements. Great care needs to be taken if you have assembly code |
| that will be called from C or C code called from assembly code, the |
| assembly code will need to be updated to conform to the new calling |
| convention. If in doubt say N |
| |
| menu "Memory Management" |
| config X86_MMU |
| bool "Enable Memory Management Unit" |
| select MEMORY_PROTECTION |
| help |
| This options enables the memory management unit present in x86 |
| and creates a set of page tables at build time. Requires an MMU |
| which supports PAE page tables. |
| |
| config X86_NO_MELTDOWN |
| bool |
| help |
| This hidden option should be set on a per-SOC basis to indicate that |
| a particular SOC is not vulnerable to the Meltdown CPU vulnerability. |
| |
| config X86_NO_SPECTRE_V2 |
| bool |
| default y |
| help |
| This hidden option should be set on a per-SOC basis to indicate that |
| a particular SOC is not vulnerable to the Spectre V2 CPU vulnerability. |
| |
| config X86_NO_SPECTRE_V4 |
| bool |
| default y |
| help |
| This hidden option should be set on a per-SOC basis to indicate that |
| a particular SOC is not vulnerable to the Spectre V4 CPU vulnerability. |
| endmenu |
| |
| config X86_ENABLE_TSS |
| bool |
| help |
| This hidden option enables defining a Task State Segment (TSS) for |
| kernel execution. This is needed to handle double-faults or |
| do privilege elevation. It also defines a special TSS and handler |
| for correctly handling double-fault exceptions, instead of just |
| letting the system triple-fault and reset. |
| |
| config X86_STACK_PROTECTION |
| bool |
| default y if HW_STACK_PROTECTION |
| select SET_GDT |
| select GDT_DYNAMIC |
| select X86_ENABLE_TSS |
| help |
| This option leverages the MMU to cause a system fatal error if the |
| bounds of the current process stack are overflowed. This is done |
| by preceding all stack areas with a 4K guard page. |
| |
| config X86_USERSPACE |
| bool |
| default y if USERSPACE |
| select THREAD_STACK_INFO |
| select SET_GDT |
| select GDT_DYNAMIC |
| select X86_ENABLE_TSS |
| help |
| This option enables APIs to drop a thread's privileges down to ring 3, |
| supporting user-level threads that are protected from each other and |
| from crashing the kernel. |
| |
| menu "Architecture Floating Point Options" |
| depends on CPU_HAS_FPU |
| |
| config SSE |
| bool "SSE registers" |
| depends on FLOAT |
| help |
| This option enables the use of SSE registers by threads. |
| |
| config SSE_FP_MATH |
| bool "Compiler-generated SSEx instructions" |
| depends on SSE |
| help |
| This option allows the compiler to generate SSEx instructions for |
| performing floating point math. This can greatly improve performance |
| when exactly the same operations are to be performed on multiple |
| data objects; however, it can also significantly reduce performance |
| when preemptive task switches occur because of the larger register |
| set that must be saved and restored. |
| |
| Disabling this option means that the compiler utilizes only the |
| x87 instruction set for floating point operations. |
| endmenu |
| |
| choice |
| prompt "Reboot implementation" |
| depends on REBOOT |
| default REBOOT_RST_CNT |
| |
| config REBOOT_RST_CNT |
| bool "Reboot via RST_CNT register" |
| help |
| Reboot via the RST_CNT register, going back to BIOS. |
| |
| endchoice |
| |
| |
| config ISA_IA32 |
| bool |
| default y |
| help |
| This option signifies the use of a CPU based on the Intel IA-32 |
| instruction set architecture. |
| |
| config IA32_LEGACY_IO_PORTS |
| bool "Support IA32 legacy IO ports" |
| depends on ISA_IA32 |
| help |
| This option enables IA32 legacy IO ports. Note these are much slower |
| than memory access, so they should be used in last resort. |
| |
| config CMOV |
| bool |
| help |
| This option signifies the use of an Intel CPU that supports |
| the CMOV instruction. |
| |
| config CACHE_LINE_SIZE_DETECT |
| bool "Detect cache line size at runtime" |
| default y |
| help |
| This option enables querying the CPUID register for finding the cache line |
| size at the expense of taking more memory and code and a slightly increased |
| boot time. |
| |
| If the CPU's cache line size is known in advance, disable this option and |
| manually enter the value for CACHE_LINE_SIZE. |
| |
| config CACHE_LINE_SIZE |
| int "Cache line size" if !CACHE_LINE_SIZE_DETECT |
| default 64 if CPU_ATOM |
| default 0 |
| help |
| Size in bytes of a CPU cache line. |
| |
| Detect automatically at runtime by selecting CACHE_LINE_SIZE_DETECT. |
| |
| config CLFLUSH_INSTRUCTION_SUPPORTED |
| bool "CLFLUSH instruction supported" |
| depends on !CLFLUSH_DETECT && CACHE_FLUSHING |
| help |
| An implementation of sys_cache_flush() that uses CLFLUSH is made |
| available, instead of the one using WBINVD. |
| |
| This option should only be enabled if it is known in advance that the |
| CPU supports the CLFLUSH instruction. It disables runtime detection of |
| CLFLUSH support thereby reducing both memory footprint and boot time. |
| |
| config CLFLUSH_DETECT |
| bool "Detect support of CLFLUSH instruction at runtime" |
| depends on CACHE_FLUSHING |
| help |
| This option should be enabled if it is not known in advance whether the |
| CPU supports the CLFLUSH instruction or not. |
| |
| The CPU is queried at boot time to determine which of the multiple |
| implementations of sys_cache_flush() linked into the image is the |
| correct one to use. |
| |
| If the CPU's support (or lack thereof) of CLFLUSH is known in advance, then |
| disable this option and set CLFLUSH_INSTRUCTION_SUPPORTED as appropriate. |
| |
| config ARCH_CACHE_FLUSH_DETECT |
| bool |
| default y |
| depends on CLFLUSH_DETECT |
| |
| config CACHE_FLUSHING |
| bool "Enable cache flushing mechanism" |
| help |
| This links in the sys_cache_flush() function. A mechanism for flushing the |
| cache must be selected as well. By default, that mechanism is discovered at |
| runtime. |
| |
| config PIC_DISABLE |
| bool "Disable PIC" |
| help |
| This option disables all interrupts on the PIC |
| |
| |
| config X86_KERNEL_OOPS |
| bool "Enable handling of kernel oops as an exception" |
| default y |
| help |
| Enable handling of k_oops() API as a CPU exception, which will provide |
| extra debugging information such as program counter and register |
| values when the oops is triggered. Requires an entry in the IDT. |
| |
| config X86_KERNEL_OOPS_VECTOR |
| int "IDT vector to use for kernel oops" |
| default 62 if MVIC |
| default 33 if !MVIC |
| range 32 255 |
| depends on X86_KERNEL_OOPS |
| help |
| Specify the IDT vector to use for the kernel oops exception handler. |
| The default should be fine for most arches, but on systems like MVIC |
| where there is a fixed IRQ-to-vector mapping another value may be |
| needed to avoid collision. |
| |
| config IRQ_OFFLOAD_VECTOR |
| int "IDT vector to use for IRQ offload" |
| default 63 if MVIC |
| default 32 if !MVIC |
| range 32 255 |
| depends on IRQ_OFFLOAD |
| help |
| Specify the IDT vector to use for the IRQ offload interrupt handler. |
| The default should be fine for most arches, but on systems like MVIC |
| where there is a fixed IRQ-to-vector mapping another value may be |
| needed to avoid collision. |
| |
| config X86_DYNAMIC_IRQ_STUBS |
| int "Number of dynamic interrupt stubs" |
| depends on DYNAMIC_INTERRUPTS |
| default 4 |
| help |
| Installing interrupt handlers with irq_connect_dynamic() requires |
| some stub code to be generated at build time, one stub per dynamic |
| interrupt. |
| |
| config XIP |
| default n |
| |
| config X86_FIXED_IRQ_MAPPING |
| bool |
| help |
| Specify whether the current interrupt controller in use has a fixed |
| mapping between IDT vectors and IRQ lines. |
| |
| endmenu |
| |
| endmenu |
