| # Copyright (c) 2021 ATL-Electronics |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| config ZEPHYR_HAL_GIGADEVICE_MODULE |
| bool |
| |
| config GD32_HAS_AF_PINMUX |
| bool |
| help |
| This option should be selected if the series use an AF pinmux model. |
| |
| config GD32_HAS_AFIO_PINMUX |
| bool |
| help |
| This option should be selected if the series use an AFIO pinmux model. |
| |
| config HAS_GD32_HAL |
| bool |
| select HAS_CMSIS_CORE if SOC_FAMILY_GD32_ARM |
| |
| if HAS_GD32_HAL |
| |
| choice GD32_HXTAL_FREQUENCY |
| prompt "High speed external oscillator clock frequency" |
| default GD32_HXTAL_FIRMWARE_DEFINED if \ |
| SOC_SERIES_GD32F403 || SOC_SERIES_GD32F4XX || SOC_SERIES_GD32F3X0 |
| default GD32_HXTAL_25MHZ if SOC_SERIES_GD32VF103 || SOC_SERIES_GD32E50X |
| default GD32_HXTAL_8MHZ if SOC_SERIES_GD32E10X |
| help |
| Define value of high speed crystal oscillator (HXTAL) in Hz |
| This value sets the frequency of the oscillator. |
| |
| config GD32_HXTAL_FIRMWARE_DEFINED |
| bool "Firmware defined" |
| depends on !SOC_SERIES_GD32VF103 |
| depends on !SOC_SERIES_GD32E10X |
| help |
| Use default frequency defined in firmware for HXTAL |
| This is using for SoCs (e.g. gd32f4xx, gd32f3x0, etc ...) |
| that have default HXTAL definitions in firmware. |
| |
| config GD32_HXTAL_8MHZ |
| bool "8MHz" |
| depends on SOC_SERIES_GD32VF103 || SOC_SERIES_GD32E10X |
| help |
| Use 8MHz oscillator for HXTAL |
| |
| config GD32_HXTAL_25MHZ |
| bool "25MHz" |
| depends on SOC_SERIES_GD32VF103 || SOC_SERIES_GD32E10X |
| help |
| Use 25MHz oscillator for HXTAL |
| |
| endchoice |
| |
| config GD32_HAS_IRC_32K |
| bool |
| help |
| Use 32KHz oscillator for low speed internal RC Oscillator |
| |
| config GD32_HAS_IRC_40K |
| bool |
| help |
| Use 40KHz oscillator for low speed internal RC Oscillator |
| |
| config GD32_LOW_SPEED_IRC_FREQUENCY |
| int |
| default 32000 if GD32_HAS_IRC_32K |
| default 40000 if GD32_HAS_IRC_40K |
| help |
| Define value of low speed internal RC oscillator (IRC) in Hz |
| |
| config GD32_DBG_SUPPORT |
| bool "Use GD32 Debug features" |
| select USE_GD32_DBG |
| default y |
| help |
| Enable GD32 Debug features. |
| This option makes allows using functions that access to |
| DBG_CTL register such as dbg_periph_enable(). |
| |
| config USE_GD32_ADC |
| bool |
| help |
| Enable GD32 Analog-to-Digital Converter (ADC) HAL module driver |
| |
| config USE_GD32_BKP |
| bool |
| help |
| Enable GD32 Backup Registers (BKP) HAL module driver |
| |
| config USE_GD32_CAN |
| bool |
| help |
| Enable GD32 Controller Area Network (CAN) HAL module driver |
| |
| config USE_GD32_CEC |
| bool |
| help |
| Enable GD32 Consumer Electronics Control (CEC) HAL module driver |
| |
| config USE_GD32_CMP |
| bool |
| help |
| Enable GD32 Comparator (CMP) HAL module driver |
| |
| config USE_GD32_CRC |
| bool |
| help |
| Enable GD32 Cyclic redundancy check calculation unit (CRC) HAL |
| module driver |
| |
| config USE_GD32_CTC |
| bool |
| help |
| Enable GD32 Clock Trim Controller (CTC) HAL module driver |
| |
| config USE_GD32_DAC |
| bool |
| help |
| Enable GD32 Digital-to-Analog Converter (DAC) HAL module driver |
| |
| config USE_GD32_DBG |
| bool |
| help |
| Enable GD32 Debug (DBG) HAL module driver |
| |
| config USE_GD32_DCI |
| bool |
| help |
| Enable GD32 Digital Camera Interface (DCI) HAL module driver |
| |
| config USE_GD32_DMA |
| bool |
| help |
| Enable GD32 Direct Memory Access controller (DMA) HAL module driver |
| |
| config USE_GD32_ENET |
| bool |
| help |
| Enable GD32 Ethernet (ENET) HAL module driver |
| |
| config USE_GD32_EXMC |
| bool |
| help |
| Enable GD32 External Memory Controller (EXMC) HAL module driver |
| |
| config USE_GD32_EXTI |
| bool |
| help |
| Enable GD32 Interrupt/Event controller (EXTI) HAL module driver |
| |
| config USE_GD32_FMC |
| bool |
| help |
| Enable GD32 Flash Memory Controller (FMC) HAL module driver |
| |
| config USE_GD32_FWDGT |
| bool |
| help |
| Enable GD32 Free Watchdog Timer (FWDGT) HAL module driver |
| |
| config USE_GD32_GPIO |
| bool |
| default y |
| help |
| Enable GD32 General-purpose and Alternate-Function I/Os |
| (GPIO and AFIO) HAL module driver |
| |
| config USE_GD32_I2C |
| bool |
| help |
| Enable GD32 Inter-Integrated Circuit Interface (I2C) HAL module driver |
| |
| config USE_GD32_IPA |
| bool |
| help |
| Enable GD32 Image Processing Accelerator (IPA) HAL module driver |
| |
| config USE_GD32_IREF |
| bool |
| help |
| Enable GD32 Programmable Current Reference (IREF) HAL module driver |
| |
| config USE_GD32_MISC |
| bool |
| help |
| Enable GD32 System Utilities (MISC) HAL module driver |
| |
| config USE_GD32_PMU |
| bool |
| help |
| Enable GD32 Power Management Unit (PMU) HAL module driver |
| |
| config USE_GD32_RCU |
| bool |
| default y |
| help |
| Enable GD32 Reset and Clock Unit (RCU) HAL module driver |
| |
| config USE_GD32_RTC |
| bool |
| help |
| Enable GD32 Real-Time Clock (RTC) HAL module driver |
| |
| config USE_GD32_SDIO |
| bool |
| help |
| Enable GD32 Secure Digital Input/Output interface (SDIO) HAL module |
| driver |
| |
| config USE_GD32_SPI |
| bool |
| help |
| Enable GD32 Serial Peripheral Interface(SPI) HAL module driver |
| |
| config USE_GD32_SQPI |
| bool |
| help |
| Enable GD32 Serial/Quad Parallel Interface (SQPI) HAL module driver |
| |
| config USE_GD32_SHRTIMER |
| bool |
| help |
| Enable GD32 Super High-Resolution Timer (SHRTIMER) HAL module driver |
| |
| config USE_GD32_SYSCFG |
| bool |
| help |
| Enable GD32 System Configuration (SYSCFG) HAL module driver |
| |
| config USE_GD32_TIMER |
| bool |
| help |
| Enable GD32 Timer (TIMER) HAL module driver |
| |
| config USE_GD32_TLI |
| bool |
| help |
| Enable GD32 TFT-LCD Interface (TLI) HAL module driver |
| |
| config USE_GD32_TMU |
| bool |
| help |
| Enable GD32 Trigonometric Math Unit (TMU) HAL module driver |
| |
| config USE_GD32_TRNG |
| bool |
| help |
| Enable GD32 True Random Number Generator (TRNG) HAL module driver |
| |
| config USE_GD32_TSI |
| bool |
| help |
| Enable GD32 Touch Sensing Interface (TSI) HAL module driver |
| |
| config USE_GD32_USART |
| bool |
| help |
| Enable GD32 Universal Synchronous/Asynchronous Receiver/Transmitter |
| (USART) HAL module driver |
| |
| config USE_GD32_USBD |
| bool |
| help |
| Enable GD32 Universal Serial Bus full-speed Device interface (USBD) |
| HAL module driver |
| |
| config USE_GD32_USBFS |
| bool |
| help |
| Enable GD32 Universal Serial Bus on-the-go Full-Speed (USBFS) HAL |
| module driver |
| |
| config USE_GD32_USBHS |
| bool |
| help |
| Enable GD32 Universal Serial Bus High-Speed interface (USBHS) HAL |
| module driver |
| |
| config USE_GD32_WWDGT |
| bool |
| help |
| Enable GD32 Window Watchdog Timer (WWDGT) HAL module driver |
| |
| endif # HAS_GD32_HAL |
