| /* |
| * Copyright (c) 2021 SILA Embedded Solutions GmbH |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| /dts-v1/; |
| #include <st/h7/stm32h735Xg.dtsi> |
| #include <st/h7/stm32h735igkx-pinctrl.dtsi> |
| #include "pmod_connector.dtsi" |
| |
| / { |
| model = "STMicroelectronics STM32H735G DISCOVERY board"; |
| compatible = "st,stm32h735g-disco"; |
| |
| chosen { |
| zephyr,console = &usart3; |
| zephyr,shell-uart = &usart3; |
| zephyr,sram = &sram0; |
| zephyr,flash = &flash0; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| red_led: led_1 { |
| gpios = <&gpioc 2 GPIO_ACTIVE_LOW>; |
| label = "User LD2"; |
| }; |
| green_led: led_2 { |
| gpios = <&gpioc 3 GPIO_ACTIVE_LOW>; |
| label = "User LD1"; |
| }; |
| }; |
| |
| gpio_keys { |
| compatible = "gpio-keys"; |
| user_button: button { |
| label = "User"; |
| gpios = <&gpioc 13 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| |
| aliases { |
| led0 = &red_led; |
| led1 = &green_led; |
| sw0 = &user_button; |
| volt-sensor1 = &vbat; |
| }; |
| }; |
| |
| &clk_hse { |
| clock-frequency = <DT_FREQ_M(25)>; |
| status = "okay"; |
| }; |
| |
| &clk_lse { |
| status = "okay"; |
| }; |
| |
| &clk_lsi { |
| status = "okay"; |
| }; |
| |
| &clk_hsi48 { |
| status = "okay"; |
| }; |
| |
| &pll { |
| div-m = <5>; |
| mul-n = <110>; |
| div-p = <1>; |
| div-q = <4>; |
| div-r = <2>; |
| clocks = <&clk_hse>; |
| status = "okay"; |
| }; |
| |
| &rcc { |
| clocks = <&pll>; |
| clock-frequency = <DT_FREQ_M(550)>; |
| d1cpre = <1>; |
| hpre = <2>; |
| d1ppre = <2>; |
| d2ppre1 = <2>; |
| d2ppre2 = <2>; |
| d3ppre = <2>; |
| }; |
| |
| &usart3 { |
| pinctrl-0 = <&usart3_tx_pd8 &usart3_rx_pd9>; |
| pinctrl-names = "default"; |
| current-speed = <115200>; |
| status = "okay"; |
| }; |
| |
| &uart7 { |
| pinctrl-0 = <&uart7_tx_pf7 &uart7_rx_pf6>; |
| pinctrl-names = "default"; |
| current-speed = <115200>; |
| }; |
| |
| &i2c4 { |
| pinctrl-0 = <&i2c4_scl_pf14 &i2c4_sda_pf15>; |
| pinctrl-names = "default"; |
| }; |
| |
| &rng { |
| status = "okay"; |
| }; |
| |
| &adc1 { |
| pinctrl-0 = <&adc1_inp0_pa0_c>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| }; |
| |
| &mac { |
| pinctrl-0 = <ð_mdc_pc1 |
| ð_rxd0_pc4 |
| ð_rxd1_pc5 |
| ð_ref_clk_pa1 |
| ð_mdio_pa2 |
| ð_crs_dv_pa7 |
| ð_tx_en_pb11 |
| ð_txd0_pb12 |
| ð_txd1_pb13>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| }; |
| |
| &sdmmc1 { |
| pinctrl-0 = <&sdmmc1_d0_pc8 |
| &sdmmc1_d1_pc9 |
| &sdmmc1_d2_pc10 |
| &sdmmc1_d3_pc11 |
| &sdmmc1_ck_pc12 |
| &sdmmc1_cmd_pd2>; |
| pinctrl-names = "default"; |
| cd-gpios = <&gpiof 5 GPIO_ACTIVE_LOW>; |
| }; |
| |
| &octospi1 { |
| pinctrl-0 = <&octospim_p1_clk_pf10 &octospim_p1_ncs_pg6 |
| &octospim_p1_io0_pd11 &octospim_p1_io1_pd12 |
| &octospim_p1_io2_pe2 &octospim_p1_io3_pd13 |
| &octospim_p1_io4_pd4 &octospim_p1_io5_pd5 |
| &octospim_p1_io6_pg9 &octospim_p1_io7_pd7 |
| &octospim_p1_dqs_pb2>; |
| pinctrl-names = "default"; |
| |
| status = "okay"; |
| |
| mx25lm51245: ospi-nor-flash@0 { |
| compatible = "st,stm32-ospi-nor"; |
| reg = <0>; |
| ospi-max-frequency = <DT_FREQ_M(50)>; |
| size = <DT_SIZE_M(512)>; /* 64 MBytes */ |
| spi-bus-width = <OSPI_OPI_MODE>; |
| data-rate = <OSPI_DTR_TRANSFER>; |
| status = "okay"; |
| |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| partition@0 { |
| label = "nor"; |
| reg = <0x00000000 DT_SIZE_M(4)>; |
| }; |
| }; |
| }; |
| }; |
| |
| &rtc { |
| clocks = <&rcc STM32_CLOCK_BUS_APB4 0x00010000>, |
| <&rcc STM32_SRC_LSI RTC_SEL(2)>; |
| status = "okay"; |
| |
| backup_regs { |
| status = "okay"; |
| }; |
| }; |
| |
| &vbat { |
| status = "okay"; |
| }; |