soc/arm/nxp_kinetis/Kconfig

# Copyright (c) 2016 Intel Corporation
# Copyright (c) 2016, Freescale Semiconductor, Inc.
# SPDX-License-Identifier: Apache-2.0

config SOC_FAMILY_KINETIS
	bool
	select HAS_SEGGER_RTT if ZEPHYR_SEGGER_MODULE

if SOC_FAMILY_KINETIS

config SOC_FAMILY
	string
	default "nxp_kinetis"

source "soc/arm/nxp_kinetis/*/Kconfig.soc"

config SOC_PART_NUMBER
	default SOC_PART_NUMBER_KINETIS_K2X if SOC_SERIES_KINETIS_K2X
	default SOC_PART_NUMBER_KINETIS_K6X if SOC_SERIES_KINETIS_K6X
	default SOC_PART_NUMBER_KINETIS_K8X if SOC_SERIES_KINETIS_K8X
	default SOC_PART_NUMBER_KINETIS_KWX if SOC_SERIES_KINETIS_KWX
	default SOC_PART_NUMBER_KINETIS_KL2X if SOC_SERIES_KINETIS_KL2X
	default SOC_PART_NUMBER_KINETIS_KE1XF if SOC_SERIES_KINETIS_KE1XF
	default SOC_PART_NUMBER_KINETIS_KV5X if SOC_SERIES_KINETIS_KV5X

config HAS_OSC
	bool
	help
	  Set if the oscillator (OSC) module is present in the SoC.

config HAS_MCG
	bool
	help
	  Set if the multipurpose clock generator (MCG) module is present in the SoC.

if HAS_OSC

choice
	prompt "Oscillator Mode Selection"
	default OSC_EXTERNAL

config OSC_EXTERNAL
	bool "External reference clock"
	help
	  Set this option to use the oscillator in external reference clock mode.

config OSC_LOW_POWER
	bool "Low power oscillator"
	help
	  Set this option to use the oscillator in low-power mode.

config OSC_HIGH_GAIN
	bool "High gain oscillator"
	help
	  Set this option to use the oscillator in high-gain mode.

endchoice

config OSC_XTAL0_FREQ
	int "External oscillator frequency"
	help
	  Set the external oscillator frequency in Hz. This should be set by the
	  board's defconfig.

endif # HAS_OSC

if HAS_MCG

config MCG_PRDIV0
	hex "PLL external reference divider"
	range 0 0x18
	default 0
	help
	  Selects the amount to divide down the external reference clock for the PLL.
	  The resulting frequency must be in the range of 2 MHz to 4 MHz.

config MCG_VDIV0
	hex "VCO 0 divider"
	range 0 0x1F
	default 0
	help
	  Selects the amount to divide the VCO output of the PLL. The VDIV 0 bits
	  establish the multiplication factor (M) applied to the reference clock
	  frequency.

config MCG_FCRDIV
	int "Fast internal reference clock divider"
	range 0 7
	default 1
	help
	  Selects the amount to divide down the fast internal reference clock. The
	  resulting frequency must be in the range 31.25 kHz to 4 MHz.

config MCG_FRDIV
	int "FLL external reference divider"
	range 0 7
	default 0
	help
	  Selects the amount to divide down the external reference clock for the
	  FLL. The resulting frequency must be in the range 31.25 kHz to 39.0625
	  kHz.

endif # HAS_MCG

config KINETIS_FLASH_CONFIG
	bool "Kinetis flash configuration field"
	default y if XIP && !BOOTLOADER_MCUBOOT
	help
	  Include the 16-byte flash configuration field that stores default
	  protection settings (loaded on reset) and security information that
	  allows the MCU to restrict access to the FTFx module.

if KINETIS_FLASH_CONFIG

config KINETIS_FLASH_CONFIG_OFFSET
	hex "Kinetis flash configuration field offset"
	default 0x400

config KINETIS_FLASH_CONFIG_FSEC
	hex "Flash security byte (FSEC)"
	range 0 0xff
	default 0xfe
	help
	  Configures the reset value of the FSEC register, which includes
	  backdoor key access, mass erase, factory access, and flash security
	  options.

config KINETIS_FLASH_CONFIG_FOPT
	hex "Flash nonvolatile option byte (FOPT)"
	range 0 0xff
	default 0xff
	help
	  Configures the reset value of the FOPT register, which includes boot,
	  NMI, and EzPort options.

config KINETIS_FLASH_CONFIG_FEPROT
	hex "EEPROM protection byte (FEPROT)"
	range 0 0xff
	default 0xff
	help
	  Configures the reset value of the FEPROT register for FlexNVM
	  devices. For program flash only devices, this byte is reserved.

config KINETIS_FLASH_CONFIG_FDPROT
	hex "Data flash protection byte (FDPROT)"
	range 0 0xff
	default 0xff
	help
	  Configures the reset value of the FDPROT register for FlexNVM
	  devices. For program flash only devices, this byte is reserved.

endif # KINETIS_FLASH_CONFIG

config WDOG_ENABLE_AT_BOOT
	bool "Keep watchdog timer enabled at boot"
	help
	  Leave SOC watchdog timer enabled at boot. The specific timeout
	  and clock configuration of the watchdog at boot is SOC dependent.
	  Note: if the watchdog timer is enabled at boot, the user will
	  need to configure the watchdog using z_arm_watchdog_init, as
	  the SOC requires watchdog configuration before initial expiration

# Enable watchdog configuration function if watchdog is left enabled at boot
config WDOG_INIT
	bool
	default WDOG_ENABLE_AT_BOOT

endif # SOC_FAMILY_KINETIS